241 resultados para BONDS
Resumo:
In the title salt, C12H11N2O2+·C7H5O6S-, the dihedral angle between the benzene and pyridine rings in the 4-(4-nitrobenzyl)pyridinium cation is 82.7 (2)°. Within the anion there is an intramolecular hydroxy-O-HO(carboxylic acid) bond. In the crystal, the cation forms a single N+-HOsulfonate hydrogen bond with the anion. These cation-anion pairs interact through duplex anion carboxylic acid O-HOsulfonate hydrogen bonds, giving a centrosymmetric cyclic association [graph set R22(16)]. The crystals studied were non-merohedrally twinned.
Resumo:
Target date retirement funds have gained favor with retirement plan investors in recent years. Typically, these funds initially have a high allocation to stocks but move towards less volatile assets, such as bonds and cash, as the target retirement date approaches. Empirical research has generally found that a switch to low-risk assets prior to retirement can reduce the risk of confronting the most extreme negative outcomes. This article questions the rationale for lifecycle switching based solely on age or target retirement date as is the prevalent practice among target date funds. The authors argue that a dynamic switching strategy, which takes into consideration achieved investment returns, will produce superior returns for most investors compared to conventional lifecycle switching. In this article, the authors put forward a dynamic lifecycle switching strategy that is conditional on the attainment of the plan member's wealth accumulation objective at every stage of switching.
Resumo:
his study presents an improved method of dealing with embedded tax liabilities in portfolio choice. We argue that using a risk-free discount rate is appropriate for calculating the present value of future tax liabilities. Supportive of recent research, our results found a taxation-induced preference of holding equities over bonds, and a location preference of holding equities in the taxable account and bonds in retirement accounts. These important findings contrast with traditional investment advice which suggests a greater capacity for risk in retirement accounts.
Resumo:
High resolution TEM images of boron carbide (B13C2) have been recorded and compared with images calculated using the multislice method as implemented by M. A. O'Keefe in the SHRLI programs. Images calculated for the [010] zone, using machine parameters for the JEOL 2000FX AEM operating at 200 keV, indicate that for the structure model of Will et al., the optimum defocus image can be interpreted such that white spots correspond to B12 icosahedra for thin specimens and to low density channels through the structure adjacent to the direct inter-icosahedral bonds for specimens of intermediate thickness (-40 > t > -100 nm). With this information, and from the symmetry observed in the TEM images, it is likely that the (101) twin plane passes through the center of icosahedron located at the origin. This model was tested using the method of periodic continuation. Resulting images compare favorably with experimental images, thus supporting the structural model. The introduction of a (101) twin plane through the origin creates distortions to the icosahedral linkages as well as to the intra-icosahedral bonding. This increases the inequivalence of adjacent icosahedral sites along the twin plane, and thereby increases the likelihood of bipolaron hopping.
Resumo:
The thermal decomposition and dehydroxylation process of coal-bearing strata kaolinite–potassium acetate intercalation complex (CSKK) has been studied using X-ray diffraction (XRD), infrared spectroscopy (IR), thermal analysis, mass spectrometric analysis and infrared emission spectroscopy. The XRD results showed that the potassium acetate (KAc) have been successfully intercalated into coal-bearing strata kaolinite with an obvious basal distance increase of the first basal peak, and the positive correlation was found between the concentration of intercalation regent KAc and the degree of intercalation. As the temperature of the system is raised, the formation of KHCO3, KCO3 and KAlSiO4, which is derived from the thermal decomposition or phase transition of CSKK, is observed in sequence. The IR results showed that new bands appeared, the position and intensities shift can also be found when the concentration of intercalation agent is raised. The thermal analysis and mass spectrometric analysis results revealed that CSKK is stable below 300 °C, and the thermal decomposition products (H2O and CO2) were further proved by the mass spectrometric analysis. A comparison of thermal analysis results of original coal-bearing strata kaolinite and its intercalation complex gives new discovery that not only a new mass loss peak is observed at 285 °C, but also the temperature of dehydroxylation and dehydration of coal bearing strata kaolinite is decreased about 100 °C. This is explained on the basis of the interlayer space of the kaolinite increased obviously after being intercalated by KAc, which led to the interlayer hydrogen bonds weakened, enables the dehydroxylation from kaolinite surface more easily. Furthermore, the possible structural model for CSKK has been proposed, with further analysis required in order to prove the most possible structures.
Resumo:
The objective of this work is to analyze ludlamite (Fe,Mn,Mg)3(PO4)2⋅4H2O from Boa Vista mine, Galiléia, Brazil and to assess the molecular structure of the mineral. The phosphate mineral ludlamite has been characterized by EMP-WDS, Raman and infrared spectroscopic measurements. The mineral is shown to be a ferrous phosphate with some minor substitution of Mg and Mn. Raman bands at 917 and 950 cm−1 are assigned to the symmetric stretching mode of and units. Raman bands at 548, 564, 599 and 634 cm−1 are assigned to the ν4 bending modes. Raman bands at 2605, 2730, 2896 and 3190 cm−1 and infrared bands at 2623, 2838, 3136 and 3185 cm−1 are attributed to water stretching vibrations. By using a Libowitzky empirical function, hydrogen bond distances are calculated from the OH stretching wavenumbers. Strong hydrogen bonds in the structure of ludlamite are observed as determined by their hydrogen bond distances. The application of infrared and Raman spectroscopy to the study of ludlamite enables the molecular structure of the pegmatite mineral ludlamite to be assessed.
Resumo:
We have used vibrational spectroscopy to study the formula and molecular structure of the mineral penkvilksite Na 2TiSi 4O 11·2H 2O. Penkvilksite is a mineral which may be used in the uptake of radioactive elements. Both Raman and infrared spectroscopies identify a band at 3638 cm−1 attributed to an OH-stretching vibration of hydroxyl units. The inference is that OH units are involved in the structure of penkvilksite. The formula may be well written as Na 2TiSi 4O 10(OH)2·H 2O. The mineral is characterised by a very intense Raman band at 1085 cm−1 and a broad infrared band at 1080 cm−1 assigned to SiO-stretching vibrations. Raman bands at 620, 667 and 711 cm−1 are attributed to SiO and TiO chain bonds. Water-stretching vibrations are observed as Raman bands at 3197, 3265, 3425 and 3565 cm−1. Vibrational spectroscopy enables aspects of the molecular structure of the mineral penkvilksite to be ascertained. Penkvilksite is a mineral which can incorporate actinides and lanthanides from radioactive waste.
Resumo:
In the structure of the of the phenolate salt of the sulfa drug sulfamethazine with 3,5-dinitrosalicylic acid, C12H15N4O2S+ C7H3N2O7-, the dihedral angle between the pyrimidine and phenyl rings of the cation is 59.70(17)\%. Cation--anion hydrogen-bonding interactions involving pyrimidine N+-H...O(carboxyl) and amine N-H...O(carboxyl) pairs give a cyclic R2/2(8) motif while secondary N-H...O hydrogen bonds between the aniline group and both sulfone and nitro O-atom acceptors give a two-dimensional structure extending along (001).
Resumo:
Opening up a band gap and finding a suitable substrate material are two big challenges for building graphene-based nanodevices. Using state-of-the-art hybrid density functional theory incorporating long range dispersion corrections, we investigate the interface between optically active graphitic carbon nitride (g-C3N4) and electronically active graphene. We find an inhomogeneous planar substrate (g-C3N4) promotes electronrich and hole-rich regions, i.e., forming a well-defined electron−hole puddle, on the supported graphene layer. The composite displays significant charge transfer from graphene to the g-C3N4 substrate, which alters the electronic properties of both components. In particular, the strong electronic coupling at the graphene/g-C3N4 interface opens a 70 meV gap in g-C3N4-supported graphene, a feature that can potentially allow overcoming the graphene’s band gap hurdle in constructing field effect transistors. Additionally, the 2-D planar structure of g-C3N4 is free of dangling bonds, providing an ideal substrate for graphene to sit on. Furthermore, when compared to a pure g-C3N4 monolayer, the hybrid graphene/g-C3N4 complex displays an enhanced optical absorption in the visible region, a promising feature for novel photovoltaic and photocatalytic applications.
Resumo:
Nanocomposites are recently known to be among the most successful materials in biomedical applications. In this work we sought to fabricate fibrous scaffolds which can mimic the extra cellular matrix of cartilaginous connective tissue not only to a structural extent but with a mechanical and biological analogy. Poly(3-hydroxybutyrate) (P3HB) matrices were reinforced with 5, 10 and 15 %wt hydroxyapatite (HA) nanoparticles and electrospun into nanocomposite fibrous scaffolds. Mechanical properties of each case were compared with that of a P3HB scaffold produced in the same processing condition. Spectroscopic and morphological observations were used for detecting the interaction quality between the constituents. Nanoparticles rested deep within the fibers of 1 μm in diameter. Chemical interactions of hydrogen bonds linked the constituents through the interface. Maximum elastic modulus and mechanical strength was obtained with the presence of 5%wt hydroxyapatite nanoparticles. Above 10%wt, nanoparticles tended to agglomerate and caused the entity to lose its mechanical performance; however, viscoelasticity interfered at this concentration and lead to a delayed failure. In other words, higher elongation at break and a massive work of rupture was observed at 10%wt.
Resumo:
Executive Summary The Australian Psychological Society categorically condemns the practice of detaining child asylum seekers and their families, on the grounds that it is not commensurate with psychological best practice concerning children’s development and mental health and wellbeing. Detention of children in this fashion is also arguably a violation of the UN Convention on the Rights of the Child. A thorough review of relevant psychological theory and available research findings from international research has led the Australian Psychological Society to conclude that: • Detention is a negative socialisation experience. • Detention is accentuates developmental risks. • Detention threatens the bonds between children and significant caregivers. • Detention limits educational opportunities. • Detention has traumatic impacts on children of asylum seekers. • Detention reduces children’s potential to recover from trauma. • Detention exacerbates the impacts of other traumas. • Detention of children from these families in many respects is worse for them than being imprisoned. In the absence of any indication from the Australian Government that it intends in the near future to alter the practice of holding children in immigration detention, the Australian Psychological Society’s intermediate position is that the facilitation of short-term and long-term psychological development and wellbeing of children is the basic tenet upon which detention centres should be audited and judged. Based on that position, the Society has identified a series of questions and concerns that arise directly from the various psychological perspectives that have been brought to bear on estimating the effects of detention on child asylum seekers. The Society argues that, because these questions and concerns relate specifically to improvement and maintenance of child detainees’ educational, social and psychological wellbeing, they are legitimate matters for the Inquiry to consider and investigate. • What steps are currently being taken to monitor the psyc hological welfare of the children in detention? In particular, what steps are being taken to monitor the psychological wellbeing of children arriving from war-torn countries? • What qualifications and training do staff who care for children and their families in detention centres have? What knowledge do they have of psychological issues faced by people who have been subjected to traumatic experiences and are suffering high degrees of anxiety, stress and uncertainty? • What provisions have been made for psycho-educational assessment of children’s specific learning needs prior to their attending formal educational programmes? • who are suffering chronic and/or vicarious trauma as a result of witnessing threatening behaviour whilst in detention? • What provisions have been made for families who have been seriously affected by displacement to participate in family therapy? • What critical incident debriefing procedures are in place for children who have witnessed their parents, other family members, or social acquaintances engaging in acts of self-harm or being harmed while in detention? What psychotherapeutic support is in place for children who themselves have been harmed or have engaged in self- harmful acts while in detention? • What provisions are in place for parenting programmes that provide support for parents of children under extremely difficult psychological and physical circumstances? • What efforts are being made to provide parents with the opportunity to model traditional family roles for children, such as working to earn an income, meal preparation, other household duties, etc.? • What opportunities are in place for the assessment of safety issues such as bullying, and sexual or physical abuse of children or their mothers in detention centres? • How are resources distributed to children and families in detention centres? • What socialization opportunities are available either within detention centres or in the wider community for children to develop skills and independence, engage in social activities, participate in cultural traditions, and communicate and interaction with same-age peers and adults from similar ethnic and religious backgrounds? • What access do children and families have to videos, music and entertainment from their cultures of origin? • What provisions are in place to ensure the maintenance of privacy in a manner commensurate with usual cultural practice? • What is the Government’s rationale for continuing to implement a policy of mandatory detention of child asylum seekers that on the face of it is likely to have a pernicious impact on these children’s mental health? • In view of the evidence on the potential long-term impact of mandatory detention on children, what processes may be followed by Government to avoid such a practice and, more importantly, to develop policies and practices that will have a positive impact on these children’s psychological development and mental health?
Resumo:
Methane gas has been identified as the most destructive greenhouse gas (Liu et al., 2004). It was reported that the global warming potential of methane per molecule relative to CO2 is approximately 23 on a 100-year timescale or 62 over a 20-year period (IPCC, 2001). Methane has high C-H bond energy of about 439 kJ/mol and other higher alkanes (or saturated hydrocarbons) also have a very strong C-C and C-H bonds, thus making their molecules to have no empty orbitals of low energy or filled orbitals of high energy that could readily participate in chemical reactions as is the case with unsaturated hydrocarbons such as olefins and alkynes (Crabtree, 1994; Labinger & Bercaw, 2002)...
Resumo:
Boron–nitrogen containing compounds with high hydrogen contents as represented by ammonia borane (NH3BH3) have recently attracted intense interest for potential hydrogen storage applications. One such compound is [(NH3)2BH2]B3H8 with a capacity of 18.2 wt% H. Two safe and efficient synthetic routes to [(NH3)2BH2]B3H8 have been developed for the first time since it was discovered 50 years ago. The new synthetic routes avoid a dangerous starting chemical, tetraborane (B4H10), and afford a high yield. Single crystal X-ray diffraction analysis reveals N–Hδ+Hδ−–B dihydrogen interactions in the [(NH3)2BH2]B3H8·18-crown-6 adduct. Extended strong dihydrogen bonds were observed in pure [(NH3)2BH2]B3H8 through crystal structure solution based upon powder X-ray analysis. Pyrolysis of [(NH3)2BH2]B3H8 leads to the formation of hydrogen gas together with appreciable amounts of volatile boranes below 160 °C.
Resumo:
Density functional theory (DFT) calculations have been carried out to explore the catalytic activation of C–H bonds in methane by the iron atom, Fe, and the iron dimer, Fe2. For methane activation on an Fe atom, the calculations suggest that the activation of the first C–H bond is mediated via the triplet excited-state potential energy surface (PES), with initial excitation of Fe to the triplet state being necessary for the reaction to be energetically feasible. Compared with the breaking of the first C–H bond, the cleavage of the second C–H bond is predicted to involve a significantly higher barrier, which could explain experimental observations of the HFeCH3 complex rather than CH2FeH2 in the activation of methane by an Fe atom. For methane activation on an iron dimer, the cleavage of the first C–H bond is quite facile with a barrier only 11.2, 15.8 and 8.4 kcal/mol on the septet state energy surface at the B3LYP/6-311+G(2df,2dp), BPW91/6-311+G(2df,2dp) and M06/B3LYP level, respectively. Cleavage of the second C–H bond from HFe2CH3 involves a barrier calculated respectively as 18.0, 10.7 and 12.4 kcal/mol at the three levels. The results suggest that the elimination of hydrogen from the dihydrogen complex is a rate-determining step. Overall, our results indicate that the iron dimer Fe2 has a stronger catalytic effect on the activation of methane than the iron atom.
Resumo:
Electronic word-of-mouth (eWOM) has gained significant attention from academics and practitioners since it has become an important source of consumers’ product information, which can influence consumer purchase intentions (Cheung & Lee, 2012). eWOM exchanges exist in two types of online communities: online communities of practice and online communities of interest. A few prior studies in online communities of interest have examined members’ motivations for product knowledge exchange (Hung & Li, 2007; Ma & Agarwal, 2007). However, there is a lack of understanding of member motivations for exchanging social bonds and enjoyment in addition to exchanging knowledge pertaining to products in the community. It is important to have an initial comprehension of motivation as an antecedent of these three eWOM exchanges so as to be able to determine the driving factors that lead members to generate eWOM communication. Thus, the research problem "What are the driving factors for members to exchange eWOM in an online community?" was justified for investigation. The purpose of this study was to examine different member motivations for exchanging three types of eWOM. Resource exchange theory and theory on consumer motivation and behavior were applied to develop a conceptual framework for this study. This study focused on an online beauty community since there is an increasing trend of consumers turning to online beauty resources so as to exchange useful beauty product information (SheSpot, 2011). As this study examined consumer motivation in an online beauty community, a web-based survey was the most effective and efficient way to gain responses from beauty community members and these members were appropriate samples from which to draw a conclusion about the whole population. Multiple regression analysis was used to test the relationships between member motivations and eWOM exchanges. It was found that members have different motivations for exchanging knowledge, social bonds, and enjoyment related to products: self-development, problem solving support, and relaxation, respectively. This study makes three theoretical contributions. First, this study identifies the influence of self-development motivation on knowledge exchange in an online community of interest, just as this motivation has previously been found in online communities of practice. This study highlights that members of the two different types of online communities share similar goals of knowledge exchange, despite the two communities evincing different attributes (e.g., member characteristics and tasks’ objectives). Further, this study will assist researchers to understand other motivations identified by prior research in online communities of practice since such motivations may be applicable to online communities of interest. Second, this study offers a new perspective on member motivation for social bonding. This study indicates that in addition to social support from friends and family, consumers are motivated to build social bonds with members in an online community of interest since they are an important source of problem solving support in regard to products. Finally, this study extends the body of knowledge pertaining to member motivation for enjoyment exchange. This study provides a basis for researchers to understand that members in an online community of interest value experiential aspects of enjoyable consumption activities, and thus based on group norms, members have a mutual desire for relaxation from enjoyment exchange. The major practical contribution is that this study provides an important guideline for marketing managers to develop different marketing strategies based on member motivations for exchanging three types of eWOM in an online community of interest, such as an online beauty community. This will potentially help marketing managers increase online traffic and revenue, and thus bring success to the community. Although, this study contributes to the literature by highlighting three distinctive member motivations for eWOM exchanges in an online community of interest, there are some possible research limitations. First, this study was conducted in an online beauty community in Australia. Hence, further research should replicate this study in other industries and nations so as to give the findings greater generalisability. Next, online beauty community members are female skewed. Thus, future research should examine whether similar patterns of motivations would emerge in other online communities that tend to be populated by males (e.g., communities focused on football). Further, a web-based survey has its limitations in terms of self-selection and self-reporting (Bhatnagar & Ghose, 2004). Therefore, further studies should test the framework by employing different research methods in order to overcome these weaknesses.