264 resultados para process and actions
Resumo:
Diesel engine fuel injector faults can lead to reduced power, increased fuel consumption and greater exhaust emission levels and if left unchecked, can eventually lead to premature engine failure. This paper provides an overview of the Diesel, or compression ignition combustion process, and of the two basic fuel injector nozzle designs used in Diesel engines, namely, the pintle-type and hole-type nozzles. Also described are some common faults associated with these two types of fuel injector nozzles and the techniques previously used to experimentally simulate these faults. This paper also presents a recent experimental campaign undertaken using two different diesel engines whereby various fuel injector nozzle faults were induced into the engines. The first series of tests was undertaken using a turbo-charged 5.9 litre; Cummins Diesel engine whist the second series of tests was undertaken using a naturally aspirated 4 cylinder, 2.216 litre, Perkins Diesel engine. Data corresponding to different injector fault conditions was captured using in-cylinder pressure, and acoustic emission transducers along with both crank-angle encoder and top-dead centre reference signals. Using averaged in-cylinder pressure signals, it was possible to qualify the severity of the faults whilst averaged acoustic emission signals were in turn, used as the basis for wavelets decomposition. Initial observations from this signal decomposition are also presented and discussed.
Resumo:
The study of venture idea characteristics and the contextual fit between venture ideas and individuals are key research goals in entrepreneurship (Davidsson, 2004). However, to date there has been limited scholarly attention given to these phenomena. Accordingly, this study aims to help fill the gap by investigating the importance of novelty and relatedness of venture ideas in entrepreneurial firms. On the premise that new venture creation is a process and that research should be focused on the early stages of the venturing process, this study primarily focuses its attention on examining how venture idea novelty and relatedness affect the performance in the venture creation process. Different types and degrees of novelty are considered here. Relatedness is shown to be based on individuals’ prior knowledge and resource endowment. Performance in the venture creation process is evaluated according to four possible outcomes: making progress, getting operational, being terminated and achieving positive cash flow. A theoretical model is developed demonstrating the relationship between these variables along with the investment of time and money. Several hypotheses are developed to be tested. Among them, it is hypothesised that novelty hinders short term performance in the venture creation process. On the other hand knowledge and resource relatedness are hypothesised to promote performance. An experimental study was required in order to understand how different types and degrees of novelty and relatedness of venture ideas affect the attractiveness of venture ideas in the eyes of experienced entrepreneurs. Thus, the empirical work in this thesis was based on two separate studies. In the first one, a conjoint analysis experiment was conducted on 32 experienced entrepreneurs in order to ascertain attitudinal preferences regarding venture idea attractiveness based on novelty, relatedness and potential financial gains. This helped to estimate utility values for different levels of different attributes of venture ideas and their relative importance in the attractiveness. The second study was a longitudinal investigation of how venture idea novelty and relatedness affect the performance in the venture creation process. The data for this study is from the Comprehensive Australian Study for Entrepreneurial Emergence (CAUSEE) project that has been established in order to explore the new venture creation process in Australia. CAUSEE collects data from a representative sample of over 30,000 households in Australia using random digit dialling (RDD) telephone interviews. From these cases, data was collected at two points in time during a 12 month period from 493 firms, who are currently involved in the start-up process. Hypotheses were tested and inferences were derived through descriptive statistics, confirmatory factor analysis and structural equation modelling. Results of study 1 indicate that venture idea characteristics have a role in the attractiveness and entrepreneurs prefer to introduce a moderate degree of novelty across all types of venture ideas concerned. Knowledge relatedness is demonstrated to be a more significant factor in attractiveness than resource relatedness. Results of study 2 show that the novelty hinders nascent venture performance. On the other hand, resource relatedness has a positive impact on performance unlike knowledge relatedness which has none. The results of these studies have important implications for potential entrepreneurs, investors, researchers, consultants etc. by developing a better understanding in the venture creation process and its success factors in terms of both theory and practice.
Resumo:
There is increasing attention to the importance of Enterprise Systems (ES) and Information Systems (IS) for Small and Medium Enterprises (SMEs). The same attention must be addressed in IS graduate curriculum. Studies reveal that despite healthy demand from the industry for IS management expertise, most IS graduates are ill-equipped to meet the challenges of modern organizations. The majority of contemporary firms, represented by SMEs, seek employees with a balance of business process knowledge and ES software skills. This article describes a curriculum that teaches Information Technology (IT) and IS managementconcepts in a SMEs context. The curriculum conceptualises a ‘learn-by-doing’ approach, to provide business process and ES software specific knowledge for its students. The approach recommends coverage of traditional content related to SMEs’’ operations, strategies, IT investment and management issues while providing an increased focus on strategic use of enterprise IT. The study addresses to an extent, the perennial challenge of updating IS curriculum, given the rapid pace of technological change.
Resumo:
Product Lifecycle Management has been developed as an approach to providing timely engineering information. However, the number of domain specializations within manufacturing makes such information communication disjointed, inefficient and error-prone. In this paper we propose an immersive 3D visualization of linked domain- specific information views for improving and accelerating communication processes in Product Lifecycle Management. With a common and yet understandable visualization of several domain views, interconnections and dependencies become obvious. The conceptual framework presented here links domain-specific information extracts from Product Lifecycle Management systems with each other and displays them via an integrated 3D representation scheme. We expect that this visualization framework should support holistic tactical decision making processes between domain-experts in operational and tactical manufacturing scenarios.
Resumo:
In 1990 the Dispute Resolution Centres Act, 1990 (Qld) (the Act) was passed by the Queensland Parliament. In the second reading speech for the Dispute Resolution Centres Bill on May 1990 the Hon Dean Wells stated that the proposed legislation would make mediation services available “in a non-coercive, voluntary forum where, with the help of trained mediators, the disputants will be assisted towards their own solutions to their disputes, thereby ensuring that the result is acceptable to the parties” (Hansard, 1990, 1718). It was recognised at that time that a method for resolving disputes was necessary for which “the conventional court system is not always equipped to provide lasting resolution” (Hansard, 1990, 1717). In particular, the lasting resolution of “disputes between people in continuing relationships” was seen as made possible through the new legislation; for example, “domestic disputes, disputes between employees, and neighbourhood disputes relating to such issues as overhanging tree branches, dividing fences, barking dogs, smoke, noise and other nuisances are occurring continually in the community” (Hansard, 1990, 1717). The key features of the proposed form of mediation in the Act were articulated as follows: “attendance of both parties at mediation sessions is voluntary; a party may withdraw at any time; mediation sessions will be conducted with as little formality and technicality as possible; the rules of evidence will not apply; any agreement reached is not enforceable in any court; although it could be made so if the parties chose to proceed that way; and the provisions of the Act do not affect any rights or remedies that a party to a dispute has apart from the Act” (Hansard, 1990, 1718). Since the introduction of the Act, the Alternative Dispute Resolution Branch of the Queensland Department of Justice and Attorney General has offered mediation services through, first the Community Justice Program (CJP), and then the Dispute Resolution Centres (DRCs) for a range of family, neighbourhood, workplace and community disputes. These services have mirrored those available through similar government agencies in other states such as the Community Justice Centres of NSW and the Victorian Dispute Resolution Centres. Since 1990, mediation has become one of the fastest growing forms of alternative dispute resolution (ADR). Sourdin has commented that "In addition to the growth in court-based and community-based dispute resolution schemes, ADR has been institutionalised and has grown within Australia and overseas” (2005, 14). In Australia, in particular, the development of ADR service provision “has been assisted by the creation and growth of professional organisations such as the Leading Edge Alternative Dispute Resolvers (LEADR), the Australian Commercial Dispute Centres (ACDC), Australian Disputes Resolution Association (ADRA), Conflict Resolution Network, and the Institute of Arbitrators and Mediators Australia (IAMA)” (Sourdin, 2005, 14). The increased emphasis on the use of ADR within education contexts (particularly secondary and tertiary contexts) has “also led to an increasing acceptance and understanding of (ADR) processes” (Sourdin, 2005, 14). Proponents of the mediation process, in particular, argue that much of its success derives from the inherent flexibility and creativity of the agreements reached through the mediation process and that it is a relatively low cost option in many cases (Menkel-Meadow, 1997, 417). It is also accepted that one of the main reasons for the success of mediation can be attributed to the high level of participation by the parties involved and thus creating a sense of ownership of, and commitment to, the terms of the agreement (Boulle, 2005, 65). These characteristics are associated with some of the core values of mediation, particularly as practised in community-based models as found at the DRCs. These core values include voluntary participation, party self-determination and party empowerment (Boulle, 2005, 65). For this reason mediation is argued as being an effective approach to resolving disputes, that creates a lasting resolution of the issues. Evaluation of the mediation process, particularly in the context of the growth of ADR, has been an important aspect of the development of the process (Sourdin, 2008). Writing in 2005 for example, Boulle, states that “although there is a constant refrain for more research into mediation practice, there has been a not insignificant amount of mediation measurement, both in Australia and overseas” (Boulle, 2005, 575). The positive claims of mediation have been supported to a significant degree by evaluations of the efficiency and effectiveness of the process. A common indicator of the effectiveness of mediation is the settlement rate achieved. High settlement rates for mediated disputes have been found for Australia (Altobelli, 2003) and internationally (Alexander, 2003). Boulle notes that mediation agreement rates claimed by service providers range from 55% to 92% (Boulle, 2005, 590). The annual reports for the Alternative Dispute Resolution Branch of the Queensland Department of Justice and Attorney-General considered prior to the commencement of this study indicated generally achievement of an approximate settlement figure of 86% by the Queensland Dispute Resolution Centres. More recently, the 2008-2009 annual report states that of the 2291 civil dispute mediated in 2007-2008, 86% reached an agreement. Further, of the 2693 civil disputes mediated in 2008-2009, 73% reached an agreement. These results are noted in the report as indicating “the effectiveness of mediation in resolving disputes” and as reflecting “the high level of agreement achieved for voluntary mediations” (Annual Report, 2008-2009, online). Whilst the settlement rates for the DRCs are strong, parties are rarely contacted for long term follow-up to assess whether agreements reached during mediation lasted to the satisfaction of each party. It has certainly been the case that the Dispute Resolution Centres of Queensland have not been resourced to conduct long-term follow-up assessments of mediation agreements. As Wade notes, "it is very difficult to compare "success" rates” and whilst “politicians want the comparison studies (they) usually do not want the delay and expense of accurate studies" (1998, 114). To date, therefore, it is fair to say that the efficiency of the mediation process has been evaluated but not necessarily its effectiveness. Rather, the practice at the Queensland DRCs has been to evaluate the quality of mediation service provision and of the practice of the mediation process. This has occurred, for example, through follow-up surveys of parties' satisfaction rates with the mediation service. In most other respects it is fair to say that the Centres have relied on the high settlement rates of the mediation process as a sign of the effectiveness of mediation (Annual Reports 1991 - 2010). Research of the mediation literature conducted for the purpose of this thesis has also indicated that there is little evaluative literature that provides an in-depth analysis and assessment of the longevity of mediated agreements. Instead evaluative studies of mediation tend to assess how mediation is conducted, or compare mediation with other conflict resolution options, or assess the agreement rate of mediations, including parties' levels of satisfaction with the service provision of the dispute resolution service provider (Boulle, 2005, Chapter 16).
Resumo:
Emerging from the challenge to reduce energy consumption in buildings is a need for research and development into the more effective use of simulation as a decision-support tool. Despite significant research, persistent limitations in process and software inhibit the integration of energy simulation in early architectural design. This paper presents a green star case study to highlight the obstacles commonly encountered with current integration strategies. It then examines simulation-based design in the aerospace industry, which has overcome similar limitations. Finally, it proposes a design system based on this contrasting approach, coupling parametric modelling and energy simulation software for rapid and iterative performance assessment of early design options.
Resumo:
Hamstring strain injuries (HSIs) are common in a number of sports and incidence rates have not declined in recent times. Additionally, the high rate of recurrent injuries suggests that our current understanding of HSI and re-injury risk is incomplete. Whilst the multifactoral nature of HSIs is agreed upon by many, often individual risk factors and/or causes of injury are examined in isolation. This review aims to bring together the causes, risk factors and interventions associated with HSIs to better understand why HSIs are so prevalent. Running is often identified as the primary activity type for HSIs and given the high eccentric forces and moderate muscle strain placed on the hamstrings during running these factors are considered to be part of the aetiology of HSIs. However, the exact causes of HSIs remain unknown and whilst eccentric contraction and muscle strain purportedly play a role, accumulated muscle damage and/or a single injurious event may also contribute. Potentially, all of these factors interact to varying degrees depending on the injurious activity type (i.e. running, kicking). Furthermore, anatomical factors, such as the biarticular organization, the dual innervations of biceps femoris (BF), fibre type distribution, muscle architecture and the degree of anterior pelvic tilt, have all been implicated. Each of these variables impact upon HSI risk via a number of different mechanisms that include increasing hamstring muscle strain and altering the susceptibility of the hamstrings to muscle damage. Reported risk factors for HSIs include age, previous injury, ethnicity, strength imbalances, flexibility and fatigue. Of these, little is known, definitively, about why previous injury increases the risk of future HSIs. Nevertheless, interventions put in place to reduce the incidence of HSIs by addressing modifiable risk factors have focused primarily on increasing eccentric strength, correcting strength imbalances and improving flexibility. The response to these intervention programmes has been mixed with varied levels of success reported. A conceptual framework is presented suggesting that neuromuscular inhibition following HSIs may impede the rehabilitation process and subsequently lead to maladaptation of hamstring muscle structure and function, including preferentially eccentric weakness, atrophy of the previously injured muscles and alterations in the angle of peak knee flexor torque. This remains an area for future research and practitioners need to remain aware of the multifactoral nature of HSIs if injury rates are to decline.
Resumo:
Road asset managers are overwhelmed with a high volume of raw data which they need to process and utilise in supporting their decision making. This paper presents a method that processes road-crash data of a whole road network and exposes hidden value inherent in the data by deploying the clustering data mining method. The goal of the method is to partition the road network into a set of groups (classes) based on common data and characterise the class crash types to produce a crash profiles for each cluster. By comparing similar road classes with differing crash types and rates, insight can be gained into these differences that are caused by the particular characteristics of their roads. These differences can be used as evidence in knowledge development and decision support.
Resumo:
In late 2007, Gold Coast City Council libraries embarked on an online library project, designed to ramp up libraries’ online services to customers. As part of this project, the Young People’s team identified a need to connect with youth aged 12 to 16 in the online environment, in order to create a direct channel of communication with this market segment and encourage them to engage with the library. Blogging was identified as an appropriate means of communicating with both current and potential library customers from this age group. The Young People’s team consequently prepared a concept plan for a youth blog for launch in Children’s Book Week 2008 and are working towards development of management and administrative models and documentation and implementation of the blog itself. While many libraries have been quick to take up Web 2.0-style services, there has been little formal publication about the successes (or failures) of this type of project. Likewise, few libraries have published about the planning, management, and administration of such services. The youth blog currently in development at Gold Coast City Council libraries will be supported by a robust planning phase and will be rigorously evaluated as part of the project. This paper will report on the project (its aims, objectives and outputs), the planning process, and the evaluation activities and outcomes.
Resumo:
The literature on recruiting and/or retaining health professionals in rural areas focuses primarily on the development of recruitment and retention strategies and assessing whether such strategies are effective. The objective of this article is to argue that it is important for all stakeholders involved in rural recruitment and/or retention processes to consider their decisions and actions from an ethics perspective. Recruitment and/or retention processes are not value neutral and it is important to understand their ethical dimensions. Methods: From the literature, elements of the recruitment and/or retention strategies that have been employed were identified and organised in respect of levels of governance (namely, the levels of health system/government, community, and individual health professionals). The elements identified in these levels were subjected to analysis to identify their ethical dimensions and to determine whether a clash or complement of values arose at each level of governance or between governance levels. Results: There is very little literature in this area that considers the ethical dimensions of rural recruitment and/or retention processes. However, all policies and practices have ethical dimensions that need to be identified and understood as they may have significant implications for recruitment and/or retention processes. Conclusion: This article recommends the application of an ethics perspective when reflecting on rural recruitment and/or retention strategies. The collective decisions of all involved in rural recruitment and/or retention processes may fundamentally influence the 'health' (broadly understood) of rural communities.
Resumo:
Although Design Led Innovation activities aim to raise the value of design within the business, knowledge about which tools are available to support companies and how to apply them to make the connection between design for new product development and design as a strategic driver of growth is needed. This paper presents a conceptual method to supplement existing process and tools to assist companies to grow through design. The model extends the authors’ previous work to explore how through storytelling, customer observation can be captured and translated into new meaning, then creating new design propositions shaped into product needs, which can drive internal business activities, brand and the strategic vision. The paper contributes to a gap in the theoretical frameworks and literature by highlighting the need to align and scale design processes which match the needs of SME’s as they transition along a trajectory to become design led businesses.
Resumo:
Purpose — The purpose of this chapter is to outline the findings of research into knowledge transfer across countries and culture and the implications of the findings for human resource practitioners. Methodology/approach — Use of a qualitative case study methodology approach was employed. Findings — The findings highlight the inherent difficulty of knowledge transfer and the broad range of factors that influence the knowledge transfer process and which are connected together in a complex and non-linear manner. Research implications — The research revealed insight into those managers most likely to be effective at knowledge transfer and what characteristics and experiences had supported this openness to knowledge from outside of their cultural context. The lessons from the research can be incorporated into the selection and development processes for expatriates. Originality value — The study affirmed the critical importance of face-to-face interaction in knowledge transfer. The research also resulted in the development of a practical model and tool, which pulls together the broad range of factors that impact on knowledge transfer.
Resumo:
Humans have altered environments and enhanced their well being unlike any other creature on the planet (Heilman & Donna, 2007); this is no different whether the environment is ecological, social or organisational. In recent times business modelling techniques have become intricately detailed in the pre-designing and evaluating of business flow before the final implementation (Ou-Yang & Lin, 2008). The importance of the organisation change and business process model is undeniable. The feedback received from real business process users is that the notation is easy to learn; the models do help people to understand the process better; the models can be used to improve the (business) process; and the notation is expressive enough to capture the essential information (Bennett, Doshi, Do Vale Junior, Kumar, Manikam, & Madavan, 2009).
Resumo:
Purpose - The purpose of this paper is to present a model for curricular integration of information literacy for undergraduate programs in higher education. Design/methodology/approach - Data are drawn from individual interviews at three universities in Australia and curricular integration working experience at a New Zealand university. Sociocultural theories are adopted in the research process and in the development of the model, Findings - Key characteristics of the curriculum integration of information literacy were identified and an information literacy integration model was developed. The S2J2 key behaviours for campus-wide multi-partner collaboration in information literacy integration were also identified. Research limitations/implications - The model was developed without including the employer needs. Through the process of further research, the point of view of the employer on how to provide information literacy education needs to be explored in order to strengthen the model in curricular design. Practical implications - The information literacy integration model was developed based on practical experience in higher education and has been applied in different undergraduate curricular programs. The model could be used or adapted by both librarians and academics when they integrate information literacy into an undergraduate curriculum from a lower level to a higher level. Originality/value - The information literacy integration model was developed based on recent PhD research. The model integrates curriculum, pedagogy and learning theories, information literacy theories, information literacy guidelines, people and collaborative together. The model provides a framework of how information literacy can be integrated into multiple courses across an undergraduate academic degree in higher education.
Resumo:
The Texas Department of Transportation (TxDOT) is concerned about the widening gap between preservation needs and available funding. Funding levels are not adequate to meet the preservation needs of the roadway network; therefore projects listed in the 4-Year Pavement Management Plan must be ranked to determine which projects should be funded now and which can be postponed until a later year. Currently, each district uses locally developed methods to prioritize projects. These ranking methods have relied on less formal qualitative assessments based on engineers’ subjective judgment. It is important for TxDOT to have a 4-Year Pavement Management Plan that uses a transparent, rational project ranking process. The objective of this study is to develop a conceptual framework that describes the development of the 4-Year Pavement Management Plan. It can be largely divided into three Steps; 1) Network-Level project screening process, 2) Project-Level project ranking process, and 3) Economic Analysis. A rational pavement management procedure and a project ranking method accepted by districts and the TxDOT administration will maximize efficiency in budget allocations and will potentially help improve pavement condition. As a part of the implementation of the 4-Year Pavement Management Plan, the Network-Level Project Screening (NLPS) tool including the candidate project identification algorithm and the preliminary project ranking matrix was developed. The NLPS has been used by the Austin District Pavement Engineer (DPE) to evaluate PMIS (Pavement Management Information System) data and to prepare a preliminary list of candidate projects for further evaluation.