Gravity-induced coronal plane joint moments in the adolescent scoliotic spine

INTRODUCTION Calculating segmental (vertebral level-by-level) torso masses in Adolescent Idiopathic Scoliosis (AIS) patients allows the gravitational loading on the scoliotic spine during relaxed standing to be estimated. METHODS Existing low dose CT scans were used to calculate vertebral level-by-level torso masses and joint moments occurring in the spine for a group of female AIS patients with right-sided thoracic curves. Image processing software, ImageJ (v1.45 NIH USA) was used to reconstruct the torso segments and subsequently measure the torso volume and mass corresponding to each vertebral level. Body segment masses for the head, neck and arms were taken from published anthropometric data. Intervertebral joint moments at each vertebral level were found by summing each of the torso segment masses above the required joint and multiplying it by the perpendicular distance to the centre of the disc. RESULTS AND DISCUSSION Twenty patients were included in this study with a mean age of 15.0±2.7 years and a mean Cobb angle 52±5.9°. The mean total trunk mass, as a percentage of total body mass, was 27.8 (SD 0.5) %. Mean segmental torso mass increased inferiorly from 0.6kg at T1 to 1.5kg at L5. The coronal plane joint moments during relaxed standing were typically 5-7Nm at the apex of the curve (Figure 1), with the highest apex joint of 7Nm. CT scans were performed in the supine position and curve magnitudes are known to be 7-10° smaller than those measured in standing [1]. Therefore joint moments produced by gravity will be greater than those calculated here. CONCLUSIONS Coronal plane joint moments as high as 7Nm can occur during relaxed standing in scoliosis patients, which may help to explain the mechanics of AIS progression. The body mass distributions calculated in this study can be used to estimate joint moments derived using other imaging modalities such as MRI and subsequently determine if a relationship exists between joint moments and progressive vertebral deformity.

Can larger cemented femoral components reduce periprosthetic fractures?

Introduction The risk for late periprosthetic fractures is higher in patients treated for a neck of femur fracture compared to those treated for osteoarthritis. It has been hypothesised that osteopenia and consequent decreased stiffness of the proximal femur are responsible for this. We investigated if a femoral component with a bigger body would increase the torque to failure in a biaxially loaded composite sawbone model. Method A biomechanical composite sawbone model was used. Two different body sizes (Exeter 44-1 vs 44-4) of a polished tapered cemented stem were implanted by an experienced surgeon, in 7 sawbones each and loaded at 40 deg/s internal rotation until failure. Torque to fracture and fracture energy were measured using a biaxial materials testing device (Instron 8874). Data are non-parametric and tested with Mann-Whitney U-test. Results The mean torque load to fracture was 154.1 NM (SD 4.4) for the 44-1 stem and 229 NM (SD10.9) for the 44-4 stem (p = 0.01). The mean fracture energy was 9.6 J (SD1.2) for the 44-1 stem and 17.2 J (SD2.0) for the 44-4 stem (p = 0.14). Conclusion the use of a large body polished tapered cemented stem for neck of femur fractures increases the torque to failure in a biomechanical model and therefore is likely to reduce late periprosthetic fracture risk in this vulnerable cohort.

Fracture load for short versus standard cemented hip stems : an experimental in vitro study

Introduction: In an attempt to reduce stress shielding in the proximal femur multiple new shorter stem design have become available. We investigated the load to fracture of a new polished tapered cemented short stem in comparison to the conventional polished tapered Exeter stem. Method: A total of forty-two stems, twenty-one short stems and twenty-one conventional stems both with three different offsets were cemented in a composite sawbone model and loaded to fracture. Results: study showed that femurs will break at a significantly lower load to failure with a shorter compared to conventional length Exeter stem. Conclusion: This Both standard and short stem design are safe to use as the torque to failure is 7–10 times as much as the torques seen in activities of daily living.

Force controlled hexapod walking

This thesis is a study on controlling methods for six-legged robots. The study is based on mathematical modeling and simulation. A new joint controller is proposed and tested in simulation that uses joint angles and leg reaction force as inputs to generate a torque, and a method to optimise this controller is formulated and validated. Simulation shows that hexapod can walk on flat ground based on PID controllers with just four target configurations and a set of leg coordination rules, which provided the basis for the design of the new controller.

Is there a potential relationship between prior h amstring strain injury and increased risk for future a nterior cruciate ligament injury?

Hamstring strain injuries (HSIs) are the most prevalent injury in a number of sports, and while anterior cruciate ligament (ACL) injuries are less common, they are far more severe and have long-term implications, such as an increased risk of developing osteoarthritis later in life. Given the high incidence and severity of these injuries, they are key targets of injury preventive programs in elite sport. Evidence has shown that a previous severe knee injury (including ACL injury) increases the risk of HSI; however, whether the functional deficits that occur after HSI result in an increased risk of ACL injury has yet to be considered. In this clinical commentary, we present evidence that suggests that the link between previous HSI and increased risk of ACL injury requires further investigation by drawing parallels between deficits in hamstring function after HSI and in women athletes, who are more prone to ACL injury than men athletes. Comparisons between the neuromuscular function of the male and female hamstring has shown that women display lower hamstring-to-quadriceps strength ratios during isokinetic knee flexion and extension, increased activation of the quadriceps compared with the hamstrings during a stop-jump landing task, a greater time required to reach maximal isokinetic hamstring torque, and lower integrated myoelectrical hamstring activity during a sidestep cutting maneuver. Somewhat similarly, in athletes with a history of HSI, the previously injured limb, compared with the uninjured limb, displays lower eccentric knee flexor strength, a lower hamstrings-to-quadriceps strength ratio, lower voluntary myoelectrical activity during maximal knee flexor eccentric contraction, a lower knee flexor eccentric rate of torque development, and lower voluntary myoelectrical activity during the initial portion of eccentric contraction. Given that the medial and lateral hamstrings have different actions at the knee joint in the coronal plane, which hamstring head is previously injured might also be expected to influence the likelihood of future ACL. Whether the deficits in function after HSI, as seen in laboratory-based studies, translate to deficits in hamstring function during typical injurious tasks for ACL injury has yet to be determined but should be a consideration for future work.

An improved robust field weakening algorithm for direct torque controlled synchronous reluctance motor drives

This paper presents an improved field weakening algorithm for synchronous reluctance motor (RSMs) drives. The proposed algorithm is robust to the variations in the machine d- and q-axes inductances. The transition between the maximum torque per ampere (MTPA), current and voltage limits as well as the maximum torque per flux (MTPF) trajectories is smooth. The proposed technique is combined with the direct torque control method to attain a high performance drive in the field weakening region. Simulation and experimental results are supplemented to verify the effectiveness of the proposed approach.

Career counseling : joint contributions of contextual action theory and the systems theory framework

The influence of constructivism and the ongoing drive for convergence, both of career theories and between theory and practice, have been key drivers in the career development literature for two decades (Patton, International Handbook of Career Guidance, 2008). Both contextual action theory and systems theory are derived from the root metaphor of contextualism, which has been proffered as a worldview to assist scientists and practitioners in organizing day-to-day experiential data. This chapter identifies the theoretical contributions of the Systems Theory Framework (STF) (Patton and McMahon, Career development and systems theory: A new development, 1999, Career psychology in South Africa, 2006) and Contextual Action Theory (Young and Valach, The future of career, 2000, Journal of Vocational Behavior 64:499–514, 2004; Young et al., Career choice and development, 1996, Career choice and development, 2002), each of which has advanced thinking in theory integration and in the integration between theory and practice in the career development and counseling field. Young et al. (Career development in childhood and adolescence, 2007) noted the connections between the Patton and McMahon systems theory approach and the contextual action theory approach and these connections will be highlighted in terms of the application of these theoretical developments to practice in career counseling, with a particular focus on the commonalities between the two approaches and what counselors can learn from each of them. In particular, this chapter will discuss common conceptual understandings and practice dimensions.

Hip joint stabilization vs. propulsion and resistance in individuals with transfemoral amputation

Joint moments and joint powers are widely used to determine the effects of rehabilitation programs and prosthetic components (e.g., alignments). A complementary analysis of the 3D angle between joint moment and joint angular velocity has been proposed to assess whether the joints are predominantly driven or stabilized.

Dynamic input to determine hip joint moments, power and work on the prosthetic limb of transfemoral amputees: ground reactions vs knee reactions

Study Design: Comparative analysis Background: Calculations of lower limbs kinetics are limited by floor-mounted force-plates. Objectives: Comparison of hip joint moments, power and mechanical work on the prosthetic limb of a transfemoral amputee calculated by inverse dynamics using either the ground reactions (force-plates) or knee reactions (transducer). Methods: Kinematics, ground reactions and knee reactions were collected using a motion analysis system, two force-plates and a multi-axial transducer mounted below the socket, respectively. Results: The inverse dynamics using ground reactions under-estimated the peaks of hip energy generation and absorption occurring at 63 % and 76 % of the gait cycle (GC) by 28 % and 54 %, respectively. This method over-estimated a phase of negative work at the hip (from 37 %GC to 56 %GC) by 24%. It under-estimated the phases of positive (from 57 %GC to 72 %GC) and negative (from 73 %GC to 98 %GC) work at the hip by 11 % and 58%, respectively. Conclusions: A transducer mounted within the prosthesis has the capacity to provide more realistic kinetics of the prosthetic limb because it enables assessment of multiple consecutive steps and a wide range of activities without issues of foot placement on force-plates. CLINICAL RELEVANCE The hip is the only joint that an amputee controls directly to set in motion the prosthesis. Hip joint kinetics are associated with joint degeneration, low back pain, risks of fall, etc. Therefore, realistic assessment of hip kinetics over multiple gait cycles and a wide range of activities is essential.

Inferring lung cancer risk factor patterns through joint Bayesian spatio-temporal analysis

Background: Preventing risk factor exposure is vital to reduce the high burden from lung cancer. The leading risk factor for developing lung cancer is tobacco smoking. In Australia, despite apparent success in reducing smoking prevalence, there is limited information on small area patterns and small area temporal trends. We sought to estimate spatio-temporal patterns for lung cancer risk factors using routinely collected population-based cancer data. Methods: The analysis used a Bayesian shared component spatio-temporal model, with male and female lung cancer included separately. The shared component reflected exposure to lung cancer risk factors, and was modelled over 477 statistical local areas (SLAs) and 15 years in Queensland, Australia. Analyses were also run adjusting for area-level socioeconomic disadvantage, Indigenous population composition, or remoteness. Results: Strong spatial patterns were observed in the underlying risk factor exposure for both males (median Relative Risk (RR) across SLAs compared to the Queensland average ranged from 0.48-2.00) and females (median RR range across SLAs 0.53-1.80), with high exposure observed in many remote areas. Strong temporal trends were also observed. Males showed a decrease in the underlying risk across time, while females showed an increase followed by a decrease in the final two years. These patterns were largely consistent across each SLA. The high underlying risk estimates observed among disadvantaged, remote and indigenous areas decreased after adjustment, particularly among females. Conclusion: The modelled underlying exposure appeared to reflect previous smoking prevalence, with a lag period of around 30 years, consistent with the time taken to develop lung cancer. The consistent temporal trends in lung cancer risk factors across small areas support the hypothesis that past interventions have been equally effective across the state. However, this also means that spatial inequalities have remained unaddressed, highlighting the potential for future interventions, particularly among remote areas.

ACE research briefing paper 008 : How to Design and Manage Successful Joint Ventures in the Exploration Space

Joint ventures are formed and dissolved regularly in the mining industry. What impact do such changes have on the viability of mineral exploration projects? The Australian Centre for Entrepreneurship Research (ACE) has taken 9 years' worth of data (2002-2011) on 1,025 joint ventures in the Australasian mining industry and studied trends in fomentation, dissolution, and reconfiguration and how they impact project outcomes. This research is generously sponsored by the Queensland Exploration Council (QEC) and the Australian Research Council (ARC).

Treatment of proximal interphalangeal joint flexion contracture: Combined static and dynamic orthotic intervention compared with other therapy intervention: randomized controlled trial

Purpose To test the effectiveness of static and dynamic orthoses using them as an exclusive treatment for proximal interphalangeal (PIP) joint flexion contracture compared with other hand therapy conservative treatments described in the literature. Methods 60 patients who used orthoses were compared with a control group that received other hand therapy treatments. Clinical assessments were measured before the experiment and 3 months after and included active PIP joint extension and function. Results A significant improvement in the extension active range of motion at the PIP joint in the second measurement was found in both groups, but it was significantly greater in the experimental group. Improvement in function (Disabilities of the Arm, Shoulder, and Hand score) between the first and second assessment was similar in the control and experimental groups. Conclusions Using night progressive static and daily dynamic orthoses as an exclusive treatment during the proliferative phase led to significant improvements in the PIP joint active extension, but the improvement did not correlate with increased function as perceived by the patient.

Correlation between architectural variables and torque in the erector spinae muscle during maximal isometric contraction

This study analysed whether a significant relationship exists between the torque and muscle thickness and pennation angle of the erector spinae muscle during a maximal isometric lumbar extension with the lumbar spine in neutral position. This was a cross-sectional study in which 46 healthy adults performed three repetitions for 5 s of maximal isometric lumbar extension with rests of 90 s. During the lumbar extensions, bilateral ultrasound images of the erector spinae muscle (to measure pennation angle and muscle thickness) and torque were acquired. Reliability test analysis calculating the internal consistency (Cronbach's alpha) of the measure, correlation between pennation angle, muscle thickness and torque extensions were examined. Through a linear regression the contribution of each independent variable (muscle thickness and pennation angle) to the variation of the dependent variable (torque) was calculated. The results of the reliability test were: 0.976–0.979 (pennation angle), 0.980–0.980 (muscle thickness) and 0.994 (torque). The results show that pennation angle and muscle thickness were significantly related to each other with a range between 0.295 and 0.762. In addition, multiple regression analysis showed that the two variables considered in this study explained 68% of the variance in the torque. Pennation angle and muscle thickness have a moderate impact on the variance exerted on the torque during a maximal isometric lumbar extension with the lumbar spine in neutral position.

The Australia-Chile free trade agreement 2008: Intellectual property and development. A submission to the Joint Standing Committee on treaties

A submission to the Joint Standing Committee on treaties

A Submission to the Joint Standing Committee on Treaties on the Anti-Counterfeiting Trade Agreement 2011 (# ACTA)

“If Hollywood could order intellectual property laws for Christmas, what would they look like? This is pretty close.” David Fewer “While European and American IP maximalists have pushed for TRIPS-Plus provisions in FTAs and bilateral agreements, they are now pushing for TRIPS-Plus-Plus protections in these various forums.” Susan Sell “ACTA is a threat to the future of a free and open Internet.” Alexander Furnas “Implementing the agreement could open a Pandora's box of potential human rights violations.” Amnesty International. “I will not take part in this masquerade.” Kader Arif, Rapporteur for the Anti-Counterfeiting Trade Agreement 2011 in the European Parliament Executive Summary As an independent scholar and expert in intellectual property, I am of the view that the Australian Parliament should reject the adoption of the Anti-Counterfeiting Trade Agreement 2011. I would take issue with the Department of Foreign Affairs and Trade’s rather partisan account of the negotiations, the consultations, and the outcomes associated with the Anti-Counterfeiting Trade Agreement 2011. In my view, the negotiations were secretive and biased; the local consultations were sometimes farcical because of the lack of information about the draft texts of the agreement; and the final text of the Anti-Counterfeiting Trade Agreement 2011 is not in the best interests of Australia, particularly given that it is a net importer of copyright works and trade mark goods and services. I would also express grave reservations about the quality of the rather pitiful National Interest Analysis – and the lack of any regulatory impact statement – associated with the Anti-Counterfeiting Trade Agreement 2011. The assertion that the Anti-Counterfeiting Trade Agreement 2011 does not require legislative measures is questionable – especially given the United States Trade Representative has called the agreement ‘the highest-standard plurilateral agreement ever achieved concerning the enforcement of intellectual property rights.’ It is worthwhile reiterating that there has been much criticism of the secretive and partisan nature of the negotiations surrounding the Anti-Counterfeiting Trade Agreement 2011. Sean Flynn summarizes these concerns: "The negotiation process for ACTA has been a case study in establishing the conditions for effective industry capture of a lawmaking process. Instead of using the relatively transparent and inclusive multilateral processes, ACTA was launched through a closed and secretive “‘club approach’ in which like-minded jurisdictions define enforcement ‘membership’ rules and then invite other countries to join, presumably via other trade agreements.” The most influential developing countries, including Brazil, India, China and Russia, were excluded. Likewise, a series of manoeuvres ensured that public knowledge about the specifics of the agreement and opportunities for input into the process were severely limited. Negotiations were held with mere hours notice to the public as to when and where they would be convened, often in countries half away around the world from where public interest groups are housed. Once there, all negotiation processes were closed to the public. Draft texts were not released before or after most negotiating rounds, and meetings with stakeholders took place only behind closed doors and off the record. A public release of draft text, in April 2010, was followed by no public or on-the-record meetings with negotiators." Moreover, it is disturbing that the Anti-Counterfeiting Trade Agreement 2011 has been driven by ideology and faith, rather than by any evidence-based policy making Professor Duncan Matthews has raised significant questions about the quality of empirical evidence used to support the proposal of Anti-Counterfeiting Trade Agreement 2011: ‘There are concerns that statements about levels of counterfeiting and piracy are based either on customs seizures, with the actual quantities of infringing goods in free circulation in any particular market largely unknown, or on estimated losses derived from industry surveys.’ It is particularly disturbing that, in spite of past criticism, the Department of Foreign Affairs and Trade has supported the Anti-Counterfeiting Trade Agreement 2011, without engaging the Productivity Commission or the Treasury to do a proper economic analysis of the proposed treaty. Kader Arif, Rapporteur for the Anti-Counterfeiting Trade Agreement 2011 in the European Parliament, quit his position, and said of the process: "I want to denounce in the strongest possible manner the entire process that led to the signature of this agreement: no inclusion of civil society organisations, a lack of transparency from the start of the negotiations, repeated postponing of the signature of the text without an explanation being ever given, exclusion of the EU Parliament's demands that were expressed on several occasions in our assembly. As rapporteur of this text, I have faced never-before-seen manoeuvres from the right wing of this Parliament to impose a rushed calendar before public opinion could be alerted, thus depriving the Parliament of its right to expression and of the tools at its disposal to convey citizens' legitimate demands.” Everyone knows the ACTA agreement is problematic, whether it is its impact on civil liberties, the way it makes Internet access providers liable, its consequences on generic drugs manufacturing, or how little protection it gives to our geographical indications. This agreement might have major consequences on citizens' lives, and still, everything is being done to prevent the European Parliament from having its say in this matter. That is why today, as I release this report for which I was in charge, I want to send a strong signal and alert the public opinion about this unacceptable situation. I will not take part in this masquerade." There have been parallel concerns about the process and substance of the Anti-Counterfeiting Trade Agreement 2011 in the context of Australia. I have a number of concerns about the substance of the Anti-Counterfeiting Trade Agreement 2011. First, I am concerned that the Anti-Counterfeiting Trade Agreement 2011 fails to provide appropriate safeguards in respect of human rights, consumer protection, competition, and privacy laws. It is recommended that the new Joint Parliamentary Committee on Human Rights investigate this treaty. Second, I argue that there is a lack of balance to the copyright measures in the Anti-Counterfeiting Trade Agreement 2011 – the definition of piracy is overbroad; the suite of civil remedies, criminal offences, and border measures is excessive; and there is a lack of suitable protection for copyright exceptions, limitations, and remedies. Third, I discuss trade mark law, intermediary liability, and counterfeiting. I express my concerns, in this context, that the Anti-Counterfeiting Trade Agreement 2011 could have an adverse impact upon consumer interests, competition policy, and innovation in the digital economy. I also note, with concern, the lobbying by tobacco industries for the Anti-Counterfeiting Trade Agreement 2011 – and the lack of any recognition in the treaty for the capacity of countries to take measures of tobacco control under the World Health Organization Framework Convention on Tobacco Control. Fourth, I note that the Anti-Counterfeiting Trade Agreement 2011 provides no positive obligations to promote access to essential medicines. It is particularly lamentable that Australia and the United States of America have failed to implement the Doha Declaration on the TRIPS Agreement and Public Health 2001 and the WTO General Council Decision 2003. Fifth, I express concerns about the border measures in the Anti-Counterfeiting Trade Agreement 2011. Such measures lack balance – and unduly favour the interests of intellectual property owners over consumers, importers, and exporters. Moreover, such measures will be costly, as they involve shifting the burden of intellectual property enforcement to customs and border authorities. Interdicting, seizing, and destroying goods may also raise significant trade issues. Finally, I express concern that the Anti-Counterfeiting Trade Agreement 2011 undermines the role of existing international organisations, such as the United Nations, the World Intellectual Property Organization and the World Trade Organization, and subverts international initiatives such as the WIPO Development Agenda 2007. I also question the raison d'être, independence, transparency, and accountability of the proposed new ‘ACTA Committee’. In this context, I am concerned by the shift in the position of the Labor Party in its approach to international treaty-making in relation to intellectual property. The Australian Parliament adopted the Australia-United States Free Trade Agreement 2004, which included a large Chapter on intellectual property. The treaty was a ‘TRIPs-Plus’ agreement, because the obligations were much more extensive and prescriptive than those required under the multilateral framework established by the TRIPS Agreement 1994. During the debate over the Australia-United States Free Trade Agreement 2004, the Labor Party expressed the view that it would seek to mitigate the effects of the TRIPS-Plus Agreement, when at such time it gained power. Far from seeking to ameliorate the effects of the Australia-United States Free Trade Agreement 2004, the Labor Government would seek to lock Australia into a TRIPS-Double Plus Agreement – the Anti-Counterfeiting Trade Agreement 2011. There has not been a clear political explanation for this change in approach to international intellectual property. For both reasons of process and substance, I conclude that the Australian Parliament and the Australian Government should reject the Anti-Counterfeiting Trade Agreement 2011. The Australian Government would do better to endorse the Washington Declaration on Intellectual Property and the Public Interest 2011, and implement its outstanding obligations in respect of access to knowledge, access to essential medicines, and the WIPO Development Agenda 2007. The case study of the Anti-Counterfeiting Trade Agreement 2011 highlights the need for further reforms to the process by which Australia engages in international treaty-making.