Interactive music formats : will audiences interact?

The purpose of this research was to conduct a pilot study of a prototype interactive music release format which sought to investigate the readiness of audiences to interact with an interactive alternative to a fixed recorded work. A prototype music interface was created for testing. The prototype was then tested on a sample of users to understand what factors might be critical to audience engagement. The research further investigated the potential implications of the interactive release format on musicians' creative process.

Real-time and interactive attacks on DNP3 critical infrastructure using Scapy

The Distributed Network Protocol v3.0 (DNP3) is one of the most widely used protocols, to control national infrastructure. Widely used interactive packet manipulation tools, such as Scapy, have not yet been augmented to parse and create DNP3 frames (Biondi 2014). In this paper we extend Scapy to include DNP3, thus allowing us to perform attacks on DNP3 in real-time. Our contribution builds on East et al. (2009), who proposed a range of possible attacks on DNP3. We implement several of these attacks to validate our DNP3 extension to Scapy, then executed the attacks on real world equipment. We present our results, showing that many of these theoretical attacks would be unsuccessful in an Ethernet-based network.

Mice behaviorally selected for high Pavlovian fear memory exhibit fear generalization, HPA-axis alterations and increased basal activity in cortico-limbic circuits

Biological factors underlying individual variability in fearfulness and anxiety have important implications for stress-related psychiatric illness including PTSD and major depression. Using an advanced intercross line (AIL) derived from C57BL/6 and DBA/2J mouse strains and behavioral selection over 3 generations, we established two lines exhibiting High or Low fear behavior after fear conditioning. Across the selection generations, the two lines showed clear differences in training and tests for contextual and conditioned fear. Before fear conditioning training, there were no differences between lines in baseline freezing to a novel context. However, after fear conditioning High line mice demonstrated pronounced freezing in a new context suggestive of poor context discrimination. Fear generalization was not restricted to contextual fear. High fear mice froze to a novel acoustic stimulus while freezing in the Low line did not increase over baseline. Enhanced fear learning and generalization are consistent with transgenic and pharmacological disruption of the hypothalamic-pituitary-adrenal axis (HPA-axis) (Brinks, 2009, Thompson, 2004, Kaouane, 2012). To determine whether there were differences in HPA-axis regulation between the lines, morning urine samples were collected to measure basal corticosterone. Levels of secreted corticosterone in the circadian trough were analyzed by corticosterone ELISA. High fear mice were found to have higher basal corticosterone levels than low line animals. Examination of hormonal stress response components by qPCR revealed increased expression of CRH mRNA and decreased mRNA for MR and CRHR1 in hypothalamus of high fear mice. These alterations may contribute to both the behavioral phenotype and higher basal corticosterone in High fear mice. To determine basal brain activity in vivo in High and Low fear mice we used manganese-enhanced magnetic resonance imaging (MEMRI). Analysis revealed a pattern of basal brain activity made up of amygdala, cortical and hippocampal circuits that was elevated in the High line. Ongoing studies also seek to determine the relative balance of excitatory and inhibitory tone in the amygdala and hippocampus and the neuronal structure of its neurons. While these heterogeneous lines are selected on fear memory expression, HPA-axis alterations and differences in hippocampal activity segregate with the behavioral phenotypes. These differences are detectable in a basal state strongly suggesting these are biological traits underlying the behavioral phenotype (Johnson et al, 2011).

Perceiving the interactive body in dance: Enhancing kinesthetic empathy through art objects

Through a consideration of audience experience of embodiment in contemporary dance performance, this project used kinesthetic empathy as a theoretical construct to inform choreographic decision-making. The research outcome challenged the traditional performer/audience relationship through an interactive dance performance work entitled Planets. This acted as a platform that allowed both audience and performer to collaboratively listen to, process and form movement in a shared kinesthetic state. This connection was enabled through the distribution of interactive art objects, which responded to the shifting proximity between performer and audience. The performance was thus experienced through following a shared goal as instigated by the interactive technology. Through practice-led research, knowledge from kinesthetic empathy, embodied cognition and the mirror neuron system were used to develop the project’s aim in encouraging interactive audiences to engage in movement. This aim influenced studio explorations of movement through an enquiry into the kinesthetic self in dance. Investigations used movement quality, tension, mobility and acceleration to access a familiar movement vocabulary appropriate for a broad interactive audience. This informed the role of the researcher as performer. Planets was developed as a collaborative project between Michael Smith and interactive visual designer Andy Bates and performed over three nights at the Ars Electronica Festival 2014 in Linz, Austria. Supported by documented footage from Planets and audience responses to the performances, this paper draws together the theoretical underpinnings behind the development of the work and includes the experiential perspective of the performer.

Interactive relationships among multiple dimensions of professional commitment: Implications for stress outcomes in lawyers

The purpose of this study was to examine the main and interactive effects of four dimensions of professional commitment on strain (i.e., depression, anxiety, perceived health status, and job dissatisfaction) for a sample of 176 law professionals. The study utilized a two-wave design in which professional commitment and strain were measured at Time 1 and strain was measured again at Time 2 (T2), 2 months later. A significant two-way interaction indicated that high affective commitment was related to less T2 job dissatisfaction only for lawyers with low accumulated costs. A significant four-way interaction indicated that high affective professional commitment was only related to fewer symptoms of T2 anxiety for lawyers with high normative professional commitment and both low limited alternatives and accumulated costs. A similar pattern of results emerged in regard to T2 perceived health status. The theoretical and practical implications of these results for career counselors are discussed.

Emergence in interactive artistic visualization

This research draws on theories of emergence to inform the creation of an artistic and direct visualization. This is an interactive artwork and drawing tool for creative participant experiences. Emergence is characteristically creative and many different models of emergence exist. It is therefore possible to effect creativity through the application of emergence mechanisms from these different disciplines. A review of theories of emergence and examples of visualization in the arts, is provided. An art project led by the author is then discussed in this context. This project, Iterative Intersections, is a collaboration with community artists from Cerebral Palsy League. It has resulted in a number of creative outcomes including the interactive art application, Of me with me. Analytical discussion of this work shows how its construction draws on aspects of experience design, fractal and emergent theory to effect perceptual emergence and creative experience as well as to facilitate self-efficacy.

Key beliefs influencing young drivers' engagement with social interactive technology on their Smartphones: A qualitative study

Objective The main aim of this study was to identify young drivers' underlying beliefs (i.e., behavioral, normative, and control) regarding initiating, monitoring/reading, and responding to social interactive technology (i.e., functions on a Smartphone that allow the user to communicate with other people). Method This qualitative study was a beliefs elicitation study in accordance with the Theory of Planned Behavior and sought to elicit young drivers' behavioral (i.e., advantages, disadvantages), normative (i.e., who approves, who disapproves), and control beliefs (i.e., barriers, facilitators) which underpin social interactive technology use while driving. Young drivers (N = 26) aged 17 to 25 years took part in an interview or focus group discussion. Results While differences emerged between the three behaviors of initiating, monitoring/reading, and responding for each of the behavioral, normative, and control belief categories, the strongest distinction was within the behavioral beliefs category (e.g., communicating with the person that they were on the way to meet was an advantage of initiating; being able to determine whether to respond was an advantage of monitoring/reading; and communicating with important people was an advantage of responding). Normative beliefs were similar for initiating and responding behaviors (e.g., friends and peers more likely to approve than other groups) and differences emerged for monitoring/reading (e.g., parents were more likely to approve of this behavior than initiating and responding). For control beliefs, there were differences between the beliefs regarding facilitators of these behaviors (e.g., familiar roads and conditions facilitated initiating; having audible notifications of an incoming communication facilitated monitoring/reading; and receiving a communication of immediate importance facilitated responding); however, the control beliefs that presented barriers were consistent across the three behaviors (e.g., difficult traffic/road conditions). Conclusion The current study provides an important addition to the extant literature and supports emerging research which suggests initiating, monitoring/reading, and responding may indeed be distinct behaviors with different underlying motivations.

MATLAB/Simulink simulation and C2000 code generation model for a grid-interactive 3-phase 4-wire inverter

This work is a MATLAB/Simulink model of a controller for a three-phase, four-wire, grid-interactive inverter. The model provides capacity for simulating the performance of power electroinic hardware, as well as code generation for an embedded controller. The implemented hardware topology is a three-leg bridge with a neutral connection to the centre-tap of the DC bus. An LQR-based current controller and MAF-based phase detector are implemented. The model is configured for code generation for a Texas Instruments TMS320F28335 Digital Signal Processor (DSP).

The development of virtual leaf surface models for interactive agrichemical spray applications

This project constructed virtual plant leaf surfaces from digitised data sets for use in droplet spray models. Digitisation techniques for obtaining data sets for cotton, chenopodium and wheat leaves are discussed and novel algorithms for the reconstruction of the leaves from these three plant species are developed. The reconstructed leaf surfaces are included into agricultural droplet spray models to investigate the effect of the nozzle and spray formulation combination on the proportion of spray retained by the plant. A numerical study of the post-impaction motion of large droplets that have formed on the leaf surface is also considered.

Effect of carrier size on the dispersion of salmeterol xinafoate from interactive mixtures

The objective of this study was to determine the influence of lactose carrier size on drug dispersion of salmeterol xinafoate (SX) from interactive mixtures. SX dispersion was measured by using the fine particle fractions determined by a twin stage impinger attached to a Rotahaler1. The particle size of the lactose carrier in the SX interactive mixtures was varied using a range of commercial inhalation-grade lactoses. In addition, differing size fractions of individual lactose samples were achieved by dry sieving. The dispersion ofSXappeared to increase as the particle size of the lactose carrier decreased for the mixtures prepared from different particle size commercial samples of lactose and from different sieve fractions of the same lactose. Fine particles of lactose (<5 mm) associated with the lactose carrier were removed from the carrier surface by a wet decantation process to produce lactose samples with low but similar concentrations of fine lactose particles. The fine particle fractions of SX in mixtures prepared with the decanted lactose decreased significantly (analysis of variance, p<0.001) and the degree of dispersion became independent of the volume mean diameter of the carriers (analysis of variance, p<0.05). The dispersion behavior is therefore associated with the presence of fine adhered particles associated with the carriers and the inherent size of the carrier itself has little influence on dispersion.

Lactose surface modification by decantation: Are drug-fine lactose ratios the key to better dispersion of salmeterol xinafoate from lactose-interactive mixtures?

Purpose The role of fine lactose in the dispersion of salmeterol xinafoate (SX) from lactose mixtures was studied by modifying the fine lactose concentration on the surface of the lactose carriers using wet decantation. Methods Fine lactose was removed from lactose carriers by wet decantation using ethanol saturated with lactose. Particle sizing was achieved by laser diffraction. Fine particle fractions (FPFs) were determined by Twin Stage Impinger using a 2.5% SX mixture, and SX was analyzed by a validated high-performance liquid chromatography method. Adhesion forces between probes of SX and silica and the lactose surfaces were determined by atomic force microscopy. Results FPFs of SX were related to fine lactose concentration in the mixture for inhalation grade lactose samples. Reductions in FPF (2-4-fold) of Aeroflo 95 and 65 were observed after removing fine lactose by wet decantation; FPFs reverted to original values after addition of micronized lactose to decanted mixtures. FPFs of SX of sieved and decanted fractions of Aeroflo carriers were significantly different (p < 0.001). The relationship between FPF and fine lactose concentration was linear. Decanted lactose demonstrated surface modification through increased SX-lactose adhesion forces; however, any surface modification other than removal of fine lactose only slightly influenced FPF. Conclusions Fine lactose played a key and dominating role in controlling FPF. SX to fine lactose ratios influenced dispersion of SX with maximum dispersion occurring as the ratio approached unity.

Party On! A call for entrepreneurship research that is more interactive, activity based, cognitively hot, compassionate, and prosocial

It is the Journal of Business Venturing's (JBV) 30th birthday. Although the community of entrepreneurship scholars deserves to celebrate JBV's achievements over the last 30 years (and congratulate the journal's parents—Ian Macmillan and S. Venkataraman), my focus is more on the future of entrepreneurship (and by extension JBV). A focus on entrepreneurship is both timeless and timely. On the one hand, entrepreneurship is timeless given the long-recognized importance of entrepreneurs to economies and societies (e.g., Jean Baptiste who supposedly coined the term in about 1800). On the other hand, a discussion of entrepreneurship is timely because now that the field of entrepreneurship has achieved legitimacy, it faces both opportunities and threats. It is thus timely to acknowledge the threats and think about opportunities to advance the field. A discussion of entrepreneurship is also timely because society faces a number of grand challenges (including the durability of poverty, environmental degradation [ Dorado and Ventresca, 2013]), challenges well suited to entrepreneurial responses...

Enriching architectural design education through interactive displays and local community engagement

Designers have a social responsibility to deal with the needs, issues, and problems that their clients and communities are confronted with. Students of design require opportunities to reflect on their role as social facilitators to develop an attitude towards community engagement through different phases and aspects of their careers. However, current design courses are challenged by compressed timeframes and fragmented scenarios of different academic requirements that do not actively teach community engagement. This paper outlines a participatory and technological approach that was employed to address these issues within the teaching of Architecture and Urban Design at the Queensland University of Technology, Brisbane, Australia. A multi-phase community based research project with actual stakeholders was implemented over a two-year period. Approximately 150 students in the final year of the Bachelor of Design-Architecture; 10 students in the Master of Architecture and 15 students in the Master of Design-Urban Design have informed and influenced each others’ learning through the teaching and research nexus facilitated by this project. The technical approach was implemented in form of a bespoke digital platform that supported the display and discussion of digital media on a series of interactive touch walls. The platform allowed students to easily upload their final designs onto large interactive surfaces, where visitors could explore the media and provide comments. Through the use of this technical platform and the introduction of neogeography, students have been able to broaden their level of interaction and support their learning experience through external structured and unstructured feedback from the local community. Students have not only been exposed to community representatives, but they also have been working in parallel on a specific case study providing each other, across different years and courses, material for reflection and data to structure their design activities.

Ortho-Dihydroxyl-9,10-anthraquinone dyes as visible-light sensitizers that exhibit a high turnover number for hydrogen evolution

Pt/TiO2 sensitized by the cheap and organic ortho-dihydroxyl-9,10-anthraquinone dyes, such as Alizarin and Alizarin Red, achieved a TON of approximately 10 000 (TOF > 250 h−1 for the first ten hours) during >80 hours of visible light irradiation (>420 nm) for photocatalytic hydrogen evolution when triethanolamine was used as the sacrificial donor. The stability and activity enhancements can be attributed to the two highly serviceable redox reactions involving the 9,10-dicarbonyl and ortho-dihydroxyl groups of the anthracene ring, respectively