Departing from the virtual community : a discussion of the ways and means to uncover localised order in online games

This paper is part one of a three part study into the collective regulation processes of players in massive multiplayer online games (MMOG). Traditionally game playing has not been classed as problematic, however with introduction of new media technologies and new ways to play games, certain contexts have become obscure, namely the localised order of ‘playing online’ or how players manage and maintain order between each other as opposed to ‘following the rules’. Principally this paper will examine concepts of ‘virtual community’. These will be illustrated as particularly unhelpful when considering how people conduct themselves in these spaces. Thus, ‘virtual community’ will be seen as critical in implicating various online behaviours as superior to other online behaviours causing obscurity and blurring actions. This obscurity is grounded by strong associations in the virtual community as logic of practise in and of itself; behaviours that fall outside this category become common sense and as such are made invisible for investigation. This paper will draw upon the theories of Basil Bernstein and Pierre Bourdieu to produce a distinction between online behaviours and ultimately make them visible for further investigation. In doing so this paper seeks to form a basis for future research where interaction in these spaces can be identified as belonging to a certain framework to inform the design of online games and applications more effectively.

Ipswich stories : using digital storytelling to research intergenerational sharing of heritage, history, place, identity and community connection : a pilot study

Co-creative media production practices offer important new modes and opportunities for social participation and engagement. In mid-2009 Institute for Creative Industries and Innovation researchers at QUT adapted a specific model of co-creative media production, known as ‘digital storytelling’ and piloted it as an action research platform for facilitating and researching knowledge production based on intergenerational dialogue and exchange. Nine stories were produced and important insights were generated into this particular use of digital storytelling, as well as the impact of institutional constraints and opportunities on the possibilities and outcomes co-creative media practices and processes.

The status of Australian nurse practitioners : the first national census

A five-section questionnaire was mailed to all 234 authorised Australian nurse practitioners in late 2007. An 85% response rate was achieved (202 responses). Respondents had a mean age of 47.0 years and 84.2% were women. Only 145 nurse practitioners (72% of respondents) reported being employed in Australia at the time of the census. Emergency nurse practitioners were the most commonly employed nationally (26.9%). Nearly one third of employed nurse practitioners reported that they were still awaiting approval to prescribe medications despite this being a core legislated skill. Over 70% stated that lack of Medicare provider numbers and lack of authority to prescribe through the Pharmaceut ical Benef its Scheme was extremely limiting to their practice. These findings are consistent with the international literature describing establishment of reformative

How do other people influence your driving speed? Exploring the 'who' and the 'how' of social influences on speeding from a qualitative perspective

Using only legal sanctions to manage the speed at which people drive ignores the potential benefits of harnessing social factors such as the influence of others. Social influences on driver speeds were explored in this qualitative examination of 67 Australian drivers. Focus group interviews with 8 driver types (young, mid-age and older males and females, and self-identified Excessive and Rare speeders) were guided by Akers’ social learning theory (Akers, 1998). Findings revealed two types of influential others: people known to the driver (passengers and parents), and unknown other drivers. Passengers were generally described as having a slowing influence on drivers: responsibility for the safety of people in the car and consideration for passenger comfort were key themes. In contrast, all but the Rare speeders reported increasing their speed when driving alone. Parental role modelling was also described. In relation to other drivers, key themes included speeding to keep up with traffic flow and perceived pressure to drive faster. This ‘pressure’ from others to ‘speed up’ was expressed in all groups and reported strategies for managing this varied. Encouragingly, examples of actual or anticipated social rewards for speeding were less common than examples of social punishments. Three main themes relating to social punishments were embarrassment, breaching the trust of others, and presenting an image of a responsible driver. Impression management and self-presentation are discussed in light of these findings. Overall, our findings indicate scope to exploit the use of social sanctions for speeding and social praise for speed limit compliance to enhance speed management strategies.

Big art small viewer : a collaborative community project

Campus Kindergarten is a community-based centre for early childhood education and care located on campus at the University of Queensland (UQ) in Brisbane, Australia. Being located within this diverse community has presented many opportunities for Campus Kindergarten. It is creating and embracing possibilities that has formed the basis for ongoing projects for children and teachers involving research and investigation. In 2002 Campus Kindergarten embarked on a collaborative project with the Art Museum bringing together these two departments within the university community.

Simulation and development of a mock circulation loop with variable compliance

Heart disease is attributed as the highest cause of death in the world. Although this could be alleviated by heart transplantation, there is a chronic shortage of donor hearts and so mechanical solutions are being considered. Currently, many Ventricular Assist Devices (VADs) are being developed worldwide in an effort to increase life expectancy and quality of life for end stage heart failure patients. Current pre-clinical testing methods for VADs involve laboratory testing using Mock Circulation Loops (MCLs), and in vivo testing in animal models. The research and development of highly accurate MCLs is vital to the continuous improvement of VAD performance. The first objective of this study was to develop and validate a mathematical model of a MCL. This model could then be used in the design and construction of a variable compliance chamber to improve the performance of an existing MCL as well as form the basis for a new miniaturised MCL. An extensive review of literature was carried out on MCLs and mathematical modelling of their function. A mathematical model of a MCL was then created in the MATLAB/SIMULINK environment. This model included variable features such as resistance, fluid inertia and volumes (resulting from the pipe lengths and diameters); compliance of Windkessel chambers, atria and ventricles; density of both fluid and compressed air applied to the system; gravitational effects on vertical columns of fluid; and accurately modelled actuators controlling the ventricle contraction. This model was then validated using the physical properties and pressure and flow traces produced from a previously developed MCL. A variable compliance chamber was designed to reproduce parameters determined by the mathematical model. The function of the variability was achieved by controlling the transmural pressure across a diaphragm to alter the compliance of the system. An initial prototype was tested in a previously developed MCL, and a variable level of arterial compliance was successfully produced; however, the complete range of compliance values required for accurate physiological representation was not able to be produced with this initial design. The mathematical model was then used to design a smaller physical mock circulation loop, with the tubing sizes adjusted to produce accurate pressure and flow traces whilst having an appropriate frequency response characteristic. The development of the mathematical model greatly assisted the general design of an in vitro cardiovascular device test rig, while the variable compliance chamber allowed simple and real-time manipulation of MCL compliance to allow accurate transition between a variety of physiological conditions. The newly developed MCL produced an accurate design of a mechanical representation of the human circulatory system for in vitro cardiovascular device testing and education purposes. The continued improvement of VAD test rigs is essential if VAD design is to improve, and hence improve quality of life and life expectancy for heart failure patients.

Contracting for community development : a case study based perspective of a public sector client initiative in Hong Kong

The construction industry is known to be an important contributor towards the gross domestic product of many countries. Moreover, the health of the construction industry is positively correlated to the economic growth of a country and in many economies public sector clients account for a major share of construction works. Given this strength, it is important for public sector clients to initiate innovations aimed at the betterment of the industry. In this context, concern about sustainable development has been a major driver of some innovative initiatives in construction industries worldwide. Furthermore, the Government of Hong Kong regards both sustainability and community development as important criteria when planning and procuring construction projects. This paper is based on a case study of a public sector development project in Hong Kong, and presents the salient features of the procurement and contractual systems adopted in the project, which foster sustainability and community development. The reported interim findings are based on a preliminary document analysis that is part of an ongoing longitudinal case study into the project. The document analysis takes a three-pronged approach in terms of how the procurement and contractual systems foster economic, environmental and social sustainability, and sums up their impact on the community as a whole.

Novel educational training program for community pharmacists

There is little evidence that workshops alone have a lasting impact on the day-to-day practice of participants. The current paper examined a strategy to increase generalization and maintenance of skills in the natural environment using pseudo-patients and immediate performance feedback to reinforce skills acquisition. A random half of pharmacies (N=30) took part in workshop training aimed at optimizing consumers' use of nonprescription analgesic products. Pharmacies in the training group also received performance feedback on their adherence to the recommended protocol. Feedback occurred immediately after a pseudo-patient visit in which confederates posed as purchasers of analgesics, and combined positive and corrective elements. Trained pharmacists were significantly more accurate at identifying people who misused the medication (P<0.001). The trained pharmacists were more likely than controls to use open-ended questions (P<0.001), assess readiness to change problematic use (P <0.001), and to deliver a brief intervention that was tailored to the person's commitment to alter his/her usage (P <0.001). Participants responded to the feedback positively. Results were consistent with the hypothesis that when workshop is combined with on-site performance feedback, it enhances practitioners' adherence to protocols in the natural setting.

Information security culture : a behaviour compliance conceptual framework

Understanding the complex dynamic and uncertain characteristics of organisational employees who perform authorised or unauthorised information security activities is deemed to be a very important and challenging task. This paper presents a conceptual framework for classifying and organising the characteristics of organisational subjects involved in these information security practices. Our framework expands the traditional Human Behaviour and the Social Environment perspectives used in social work by identifying how knowledge, skills and individual preferences work to influence individual and group practices with respect to information security management. The classification of concepts and characteristics in the framework arises from a review of recent literature and is underpinned by theoretical models that explain these concepts and characteristics. Further, based upon an exploratory study of three case organisations in Saudi Arabia involving extensive interviews with senior managers, department managers, IT managers, information security officers, and IT staff; this article describes observed information security practices and identifies several factors which appear to be particularly important in influencing information security behaviour. These factors include values associated with national and organisational culture and how they manifest in practice, and activities related to information security management.

Little theory, big plans : social capital and community building in Aboriginal Australia

The discourse surrounding recent Aboriginal social policy regularly refers to pragmatism and partnership. In a simpler world, we might call this ‘getting things done with Aboriginal people.’ To that extent, the discourse draws on an indisputable common sense, and it is not surprising that a variety of political agendas can be packaged within such language. While many things need to be done, the quantity and particularly the quality of social networks required to take effective policy into effective practice is something we ought to consider more carefully. This is where the concept of social capital could be useful, since it focuses attention on the social resources required to construct social policy, as well as the social resources that could be produced by effective social policy. Partnerships and pragmatism are therefore related at a most fundamental level in terms of social policy. We question whether this important conceptual bedrock has been fully explored. Hence we review here some recent ‘big plans’ for Aboriginal Australia, and ask whether the size of the theory matches the size of the plans.

Behaviour and design of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.

The use of the Index for Inclusion in a regional educational learning community

This project utilised the materials of the Index for Inclusion (Booth & Ainscow, 2002) to enhance the development of a learning community of educators in Education Queensland in 2009. The values, dimensions and indicators of the Index for Inclusion, were incorporated into the professional development package, On the Same Page (Education Queensland, 2008), to enhance its wider purpose to improve inclusive education practices explicit within the P-12 Curriculum Framework (Education Queensland, 2008). The incorporation of the values, dimensions and indicators of the Index enabled deeper reflection by participants about their expectations of students and their resulting teaching practices. The subsequent development of action plans assisted participants to develop “a curriculum for all” (Education Queensland, 2008, p. 9). Deeper reflection, action planning and ‘distance travelled’ in understanding of inclusive education were apparent in the comments by participants and their evaluation of the professional development package.

Particle emissions, volatility, and toxicity from an ethanol fumigated compression ignition engine

Particle emissions, volatility, and the concentration of reactive oxygen species (ROS) were investigated for a pre-Euro I compression ignition engine to study the potential health impacts of employing ethanol fumigation technology. Engine testing was performed in two separate experimental campaigns with most testing performed at intermediate speed with four different load settings and various ethanol substitutions. A scanning mobility particle sizer (SMPS) was used to determine particle size distributions, a volatilization tandem differential mobility analyzer (V-TDMA) was used to explore particle volatility, and a new profluorescent nitroxide probe, BPEAnit, was used to investigate the potential toxicity of particles. The greatest particulate mass reduction was achieved with ethanol fumigation at full load, which contributed to the formation of a nucleation mode. Ethanol fumigation increased the volatility of particles by coating the particles with organic material or by making extra organic material available as an external mixture. In addition, the particle-related ROS concentrations increased with ethanol fumigation and were associated with the formation of a nucleation mode. The smaller particles, the increased volatility, and the increase in potential particle toxicity with ethanol fumigation may provide a substantial barrier for the uptake of fumigation technology using ethanol as a supplementary fuel.

Conceptions of school based youth health nursing : a phenomenographic study

The School Based Youth Health Nurse Program was established in 1999 by the Queensland Government to fund school nurse positions in Queensland state high schools. Schools were required to apply for a School Based Youth Health Nurse during a five-phase recruitment process, managed by the health districts, and rolled out over four years. The only mandatory selection criterion for the position of School Based Youth Health Nurse was registration as a General Nurse and most School Based Youth Health Nurses are allocated to two state high schools. Currently, there are approximately 115 Full Time Equivalent School Based Youth Health Nurse positions across all Queensland state high schools. The literature review revealed an abundance of information about school nursing. Most of the literature came from the United Kingdom and the United States, who have a different model of school nursing to school based youth health nursing. However, there is literature to suggest school nursing is gradually moving from a disease-focused approach to a social view of health. The noticeable number of articles about, for example, drug and alcohol, mental health, and contemporary sexual health issues, is evidence of this change. Additionally, there is a significant the volume of literature about partnerships and collaboration, much of which is about health education, team teaching and how school nurses and schools do health business together. The surfacing of this literature is a good indication that school nursing is aligning with the broader national health priority areas. More particularly, the literature exposed a small but relevant and current body of research, predominantly from Queensland, about school based youth health nursing. However, there remain significant gaps in the knowledge about school based youth health nursing. In particular, there is a deficit about how School Based Youth Heath Nurses understand the experience of school based youth health nursing. This research aimed to reveal the meaning of the experience of school based youth health nursing. The research question was How do School Based Youth Health Nurses’ understand the experience of school based youth health nursing? This enquiry was instigated because the researcher, who had a positive experience of school based youth health nursing, considered it important to validate other School Based Youth Health Nurses’ experiences. Consequently, a comprehensive use of qualitative research was considered the most appropriate manner to explore this research question. Within this qualitative paradigm, the research framework consists of the epistemology of social constructionism, the theoretical perspective of interpretivism and the approach of phenomenography. After ethical approval was gained, purposeful and snowball sampling was used to recruit a sample of 16 participants. In-depth interviews, which were voluntary, confidential and anonymous, were mostly conducted in public venues and lasted from 40-75 minutes. The researcher also kept a researchers journal as another form of data collection. Data analysis was guided by Dahlgren and Fallsbergs’ (1991, p. 152) seven phases of data analysis which includes familiarization, condensation, comparison, grouping, articulating, labelling and contrasting. The most important finding in this research is the outcome space, which represents the entirety of the experience of school based youth health nursing. The outcome space consists of two components: inside the school environment and outside the school environment. Metaphorically and considered as whole-in-themselves, these two components are not discreet but intertwined with each other. The outcome space consists of eight categories. Each category of description is comprised of several sub-categories of description but as a whole, is a conception of school based youth health nursing. The eight conceptions of school based youth health nursing are: 1. The conception of school based youth health nursing as out there all by yourself. 2. The conception of school based youth health nursing as no real backup. 3. The conception of school based youth health nursing as confronted by many barriers. 4. The conception of school based youth health nursing as hectic and full-on. 5. The conception of school based youth health nursing as working together. 6. The conception of school based youth health nursing as belonging to school. 7. The conception of school based youth health nursing as treated the same as others. 8. The conception of school based youth health nursing as the reason it’s all worthwhile. These eight conceptions of school based youth health nursing are logically related and form a staged hierarchical relationship because they are not equally dependent on each other. The conceptions of school based youth health nursing are grouped according to negative, negative and positive and positive conceptions of school based youth health nursing. The conceptions of school based youth health nursing build on each other, from the bottom upwards, to reach the authorized, or the most desired, conception of school based youth health nursing. This research adds to the knowledge about school nursing in general but especially about school based youth health nursing specifically. Furthermore, this research has operational and strategic implications, highlighted in the negative conceptions of school based youth health nursing, for the School Based Youth Health Nurse Program. The researcher suggests the School Based Youth Health Nurse Program, as a priority, address the operational issues The researcher recommends a range of actions to tackle issues and problems associated with accommodation and information, consultations and referral pathways, confidentiality, health promotion and education, professional development, line management and School Based Youth Health Nurse Program support and school management and community. Strategically, the researcher proposes a variety of actions to address strategic issues, such as the School Based Youth Health Nurse Program vision, model and policy and practice framework, recruitment and retention rates and evaluation. Additionally, the researcher believes the findings of this research have the capacity to spawn a myriad of future research projects. The researcher has identified the most important areas for future research as confidentiality, information, qualifications and health outcomes.

More than experiential learning or volunteering : a case study of community service learning within the Australian context

Community service learning is the integration of experiential learning and community service into coursework such that community needs are met and students gain both professional skills and a sense of civic responsibility. A critical component is student reflection. This paper provides an example of the application of community service learning within an undergraduate health unit at the Queensland University of Technology. Based on survey data from 36 program participants, it demonstrates the impact of CSL on student outcomes. Results show that students benefited by developing autonomy through real world experiences, through increased self-assurance and achievement of personal growth, through gaining new insights into the operations of community service organisations and through moving towards becoming responsible citizens. Students expect their CSL experience to have long-lasting impact on their lives, with two-thirds of participants noting that they would like to continue volunteering as part of their future development.