Association of ERAP1, but not IL23R, with ankylosing spondylitis in a Han Chinese population

Objective The results of a recent genome-wide association study have shown that ERAP1 and IL23R are associated with ankylosing spondylitis (AS) in Caucasian populations from North America and the UK. Based on these findings, we undertook the current study to investigate whether single-nucleotide polymorphisms (SNPs) covering the genes ERAP1 and IL23R are associated with AS in a Han Chinese population. Methods A case-control study was performed in Han Chinese patients with AS (n = 527) and controls (n = 945) from Shanghai and Nanjing. All patients met the modified New York criteria for AS. The Sequenom iPlex platform was used to genotype cases and controls for 21 tag SNPs covering IL23R and 38 tag SNPs covering ERAP1. Statistical analysis was performed using the Cochran-Armitage test for trend. Results Multiple SNPs in ERAP1 were significantly associated with AS (for rs27980, P = 0.0048; for rs7711564, P = 0.0081). However, no association was observed between IL23R and AS (for all SNPs, P > 0.1). The nonsynonymous SNP in IL23R, rs11209026, widely thought to be the primary AS-associated SNP in IL23R in Europeans, was found not to be polymorphic in Chinese. Conclusion Our results demonstrate that genetic polymorphisms in ERAP1 are associated with AS in Han Chinese, suggesting a common pathogenic mechanism for the disease in Chinese and Caucasian populations, and that IL23R is not associated with AS in Chinese, indicating a difference in the mechanism of disease pathogenesis between Chinese and Caucasian populations. This may result from the fact that rs11209026, the nonsynonymous SNP in IL23R, is not polymorphic in Chinese patients, providing further evidence that rs11209026 is the key polymorphism associated with AS (and likely inflammatory bowel disease and psoriasis) in this gene.

Adherence to insulin treatment in diabetes: Can it be improved?

Insulin is used in all subjects with Type 1 diabetes, and when Type 2 diabetes is not controlled by oral anti-diabetic medicines, insulin is also used in Type 2 diabetes. However, despite this use, there is still increased mortality and morbidity in subjects with diabetes, compared to subjects without diabetes. One of the factors, which may be involved in this increased mortality and morbidity in subjects with diabetes, is nonadherence to insulin. Nonadherence rates to insulin are in the range20-38%, and many factors contribute to the nonadherence. The major aim of the review was to determine whether interventions to improve adherence to insulin do actually improve adherence to insulin. Most studies have shown that adherence to insulin was improved by changing from the vial-and-syringe approach to prefilled insulin pens, but not all studies have shown that this translated into better glycemic control and clinical outcomes. The results of studies using automatic telephone messages to improve adherence to insulin to date are inconclusive. There is limited and variable evidence that an intervention by a nurse/educator, which discusses adherence to medicines, does improve adherence to insulin. In contrast, there is little or no evidence that an extra intervention by a doctor or an intervention by a pharmacist, which discusses adherence to insulin, does actually improve the measured adherence to insulin. In conclusion, rather than assuming that an intervention by a health professional discussing adherence to insulin actually improves adherence to insulin, long-term studies investigating this are required.

Critical risk factors affecting the implementation of PPP waste-to-energy projects in China

Since 2003, Mainland China has been promoting the public–private partnership (PPP) procurement model in the waste-to-energy incineration sector to reduce the waste burying rate and improve environmental quality. Five critical risk factors (CRFs) that affect the construction and operation of waste-to-energy incineration projects have been identified from real-life risk events of 14 PPP waste-to-energy incineration plants through content analysis. These risk factors are insufficient waste supply, disposal of non-licensed waste, environmental risk, payment risk, and lack of supporting infrastructure. A recently completed PPP waste-to-energy incineration plant, the Shanghai Tianma project, was investigated to learn from the effective management of CRFs. First-hand data about the Shanghai Tianma project was collected, with a focus on project negotiation and concession agreement. Lessons learned about risk management were acquired. This paper presents a detailed study of the contractual structure, risk sharing scheme, risk response measures to CRFs, and project transfer of a PPP project. The study results will provide governments with management implications to prepare equitable concession agreements and benefit private investors by effectively mitigating and managing risks in future PPP waste-to-energy incineration projects.

Impact of temperature on mortality in three major Chinese cities

To study the relation between temperature and mortality by estimating the temperature-related mortality in Beijing, Shanghai, and Guangzhou. METHODS: Data of daily mortality, weather and air pollution in the three cities were collected. A distributed lag nonlinear model was established and used in analyzing the effects of temperature on mortality. Current and future net temperature-related mortality was estimated. RESULTS: The association between temperature and mortality was J-shaped, with an increased death risk of both hot and cold temperature in these cities. The effects of cold temperature on health lasted longer than those of hot temperature. The projected temperature-related mortality increased with the decreased cold-related mortality. The mortality was higher in Guangzhou than in Beijing and Shanghai. CONCLUSION: The impact of temperature on health varies in the 3 cities of China, which may have implications for climate policy making in China.

The effects of ambient temperature on cerebrovascular mortality: An epidemiologic study in four climatic zones in China

Background Little evidence is available about the association between temperature and cerebrovascular mortality in China. This study aims to examine the effects of ambient temperature on cerebrovascular mortality in different climatic zones in China. Method We obtained daily data on weather conditions, air pollution and cerebrovascular deaths from five cities (Beijing, Tianjin, Shanghai, Wuhan, and Guangzhou) in China during 2004-2008. We examined city-specific associations between ambient temperature and the cerebrovascular mortality, while adjusting for season, long-term trends, day of the week, relative humidity and air pollution. We examined cold effects using a 1°C decrease in temperature below a city-specific threshold, and hot effects using a 1°C increase in temperature above a city-specific threshold. We used a meta-analysis to summarize the cold and hot effects across the five cities. Results Beijing and Tianjin (with low mean temperature) had lower thresholds than Shanghai, Wuhan and Guangzhou (with high mean temperature). In Beijing, Tianjin, Wuhan and Guangzhou cold effects were delayed, while in Shanghai there was no or short induction. Hot effects were acute in all five cities. The cold effects lasted longer than hot effects. The hot effects were followed by mortality displacement. The pooled relative risk associated with a 1°C decrease in temperature below thresholds (cold effect) was 1.037 (95% confidence interval (CI): 1.020, 1.053). The pooled relative risk associated with a 1°C increase in temperature above thresholds (hot effect) was 1.014 (95% CI: 0.979, 1.050). Conclusion Cold temperatures are significantly associated with cerebrovascular mortality in China, while hot effect is not significant. People in colder climate cities were sensitive to hot temperatures, while people in warmer climate cities were vulnerable to cold temperature.

Art museums and the global tourist: Experience centers in experiencescapes

Art museums are playing an important role is attracting cultural tourists to global cities and regions. Traditionally, art museums were primarily known for their didactic role. In a post-avant-garde era however museums are more focused on appealing to a broader clientele that want art to be novel and entertaining. Art museums have also come to play a greater role in gentrification projects and cultural precincts. This is because they are ideally suited for tourist-centric environments that offer a variety of immersive sensory experiences, and combine museums (often designed by star-architects), international hotels, restaurants, high-end shopping zones, and other leisure platforms. These "experiencescapes" include Port Maravilha urban waterfront development in Rio de Janiero, the Shanghai Bund, and the Broad project in Los Angeles. The Museum of Old and New Art in Hobart Australia is a boutique player in the global market for experiencescapes. It is smaller than many of its competitors and is situated in a remote part of the world, yet it has made an important contribution to Tasmania’s tourism industry.

Image processing and classification procedure for the analysis of Australian frog vocalisations

Frog species have been declining worldwide at unprecedented rates in the past decades. There are many reasons for this decline including pollution, habitat loss, and invasive species [1]. To preserve, protect, and restore frog biodiversity, it is important to monitor and assess frog species. In this paper, a novel method using image processing techniques for analyzing Australian frog vocalisations is proposed. An FFT is applied to audio data to produce a spectrogram. Then, acoustic events are detected and isolated into corresponding segments through image processing techniques applied to the spectrogram. For each segment, spectral peak tracks are extracted with selected seeds and a region growing technique is utilised to obtain the contour of each frog vocalisation. Based on spectral peak tracks and the contour of each frog vocalisation, six feature sets are extracted. Principal component analysis reduces each feature set down to six principal components which are tested for classification performance with a k-nearest neighbor classifier. This experiment tests the proposed method of classification on fourteen frog species which are geographically well distributed throughout Queensland, Australia. The experimental results show that the best average classification accuracy for the fourteen frog species can be up to 87%.

An experimental study on anisotropic mechanical properties of porcine thoracic aorta

Objective: To study the anisotropic mechanical properties of the thoracic aorta in porcine. Methods: Twenty-one porcine thoracic aortas were collected and categorized into three groups. The aortas were then cut through in their axial directions and expanded into two-dimensional planes. Then, by setting the length direction of the planar aortas (i.e., axial directions of the aortas) as 0°, each planar aorta was counterclockwisely cut into 8 samples with orientation of 30°, 45°, 60°, 90°, 120°, 135°, 150° and 180°, respectively. Finally, the uniaxial tensile tests were applied on three groups of samples at the loading rates of 1, 5 and 10 mm/min, respectively, to obtain the elastic modulus and ultimate stress of the aorta in different directions and at different loading rates. Results: The stress-strain curves exhibited different viscoelastic behaviors. With the increase of sample orientations, the elastic modulus gradually increased from 30°, reached the maximum value at 90°, and then gradually decreased till 180°. The variation trend of ultimate stress was similar to that of elastic modulus. Moreover, different loading rates showed a significant influence on the results of elastic modulus and ultimate stress, but a weak influence on the anisotropic degree. Conclusions: The porcine thoracic aorta is highly anisotropic. This research finding provides parameter references for assignment of material properties in finite element modeling, and is significant for understanding biomechanical properties of the arteries.

3D numerical simulation of avascular tumour growth: effect of hypoxic micro-environment in host tissue

A three-dimensional (3D) mathematical model of tumour growth at the avascular phase and vessel remodelling in host tissues is proposed with emphasis on the study of the interactions of tumour growth and hypoxic micro-environment in host tissues. The hybrid based model includes the continuum part, such as the distributions of oxygen and vascular endothelial growth factors (VEGFs), and the discrete part of tumour cells (TCs) and blood vessel networks. The simulation shows the dynamic process of avascular tumour growth from a few initial cells to an equilibrium state with varied vessel networks. After a phase of rapidly increasing numbers of the TCs, more and more host vessels collapse due to the stress caused by the growing tumour. In addition, the consumption of oxygen expands with the enlarged tumour region. The study also discusses the effects of certain factors on tumour growth, including the density and configuration of preexisting vessel networks and the blood oxygen content. The model enables us to examine the relationship between early tumour growth and hypoxic micro-environment in host tissues, which can be useful for further applications, such as tumour metastasis and the initialization of tumour angiogenesis.

Comparison between computational models of abdominal aortic aneurysm

Objective: To compare the differences in the hemodynamic parameters of abdominal aortic aneurysm (AAA) between fluid-structure interaction model (FSIM) and fluid-only model (FM), so as to discuss their application in the research of AAA. Methods: An idealized AAA model was created based on patient-specific AAA data. In FM, the flow, pressure and wall shear stress (WSS) were computed using finite volume method. In FSIM, an Arbitrary Lagrangian-Eulerian algorithm was used to solve the flow in a continuously deforming geometry. The hemodynamic parameters of both models were obtained for discussion. Results: Under the same inlet velocity, there were only two symmetrical vortexes in the AAA dilation area for FSIM. In contrast, four recirculation areas existed in FM; two were main vortexes and the other two were secondary flow, which were located between the main recirculation area and the arterial wall. Six local pressure concentrations occurred in the distal end of AAA and the recirculation area for FM. However, there were only two local pressure concentrations in FSIM. The vortex center of the recirculation area in FSIM was much more close to the distal end of AAA and the area was much larger because of AAA expansion. Four extreme values of WSS existed at the proximal of AAA, the point of boundary layer separation, the point of flow reattachment and the distal end of AAA, respectively, in both FM and FSIM. The maximum wall stress and the largest wall deformation were both located at the proximal and distal end of AAA. Conclusions: The number and center of the recirculation area for both models are different, while the change of vortex is closely associated with the AAA growth. The largest WSS of FSIM is 36% smaller than that of FM. Both the maximum wall stress and largest wall displacement shall increase with the outlet pressure increasing. FSIM needs to be considered for studying the relationship between AAA growth and shear stress.

Atheroma: Is calcium important or not? A modelling study of stress within the atheromatous fibrous cap in relation to position and size of calcium deposits

Atheromatous plaque rupture h the cause of the majority of strokes and heart attacks in the developed world. The role of calcium deposits and their contribution to plaque vulnerability are controversial. Some studies have suggested that calcified plaque tends to be more stable whereas others have suggested the opposite. This study uses a finite element model to evaluate the effect of calcium deposits on the stress within the fibrous cap by varying their location and size. Plaque fibrous cap, lipid pool and calcification were modeled as hyperelastic, Isotropic, (nearly) incompressible materials with different properties for large deformation analysis by assigning time-dependent pressure loading on the lumen wall. The stress and strain contours were illustrated for each condition for comparison. Von Mises stress only increases up to 1.5% when varying the location of calcification in the lipid pool distant to the fibrous cap. Calcification in the fibrous cap leads to a 43% increase of Von Mises stress when compared with that in the lipid pool. An increase of 100% of calcification area leads to a 15% stress increase in the fibrous cap. Calcification in the lipid pool does not increase fibrous cap stress when it is distant to the fibrous cap, whilst large areas of calcification close to or in the fibrous cap may lead to a high stress concentration within the fibrous cap, which may cause plaque rupture. This study highlights the application of a computational model on a simulation of clinical problems, and it may provide insights into the mechanism of plaque rupture.

Validation of a 4DOF manoeuvring model of a high-speed vehicle-passenger trimaran

This paper presents the validation of a manoeuvring model for a novel 127m-vehicle-passenger trimaran via full scale trials. The adopted structure of the model is based on a model previously proposed in the literature with some simplifications. The structure of the model is discussed. Then initial parameter estimates are computed, and the final set of parameters are obtained via adjustments based on engineering judgement and application of a genetic algorithm so as to match the data of the trials. The validity of the model is also assessed with data from a trial different from the one use for the parameter adjustment. The model shows good agreement with the trial data.

Knowledge unlatched : A global library consortium model for funding Open Access scholarly books

Specialist scholarly books, including monographs, allow researchers to present their work, pose questions and to test and extend areas of theory through long-form writing. In spite of the fact that research communities all over the world value monographs and depend heavily on them as a requirement of tenure and promotion in many disciplines, sales of this kind of book are in free fall, with some estimates suggesting declines of as much as 90% over twenty years (Willinsky 2006). Cashstrapped monograph publishers have found themselves caught in a negative cycle of increasing prices and falling sales, with few resources left to support experimentation, business model innovation or engagement with digital technology and Open Access (OA). This chapter considers an important attempt to tackle failing markets for scholarly monographs, and to enable the wider adoption of OA licenses for book-length works: the 2012 – 2014 Knowledge Unlatched pilot. Knowledge Unlatched is a bold attempt to reconfigure the market for specialist scholarly books: moving it beyond the sale of ‘content’ towards a model that supports the services valued by scholarly and wider communities in the context of digital possibility. Its success has powerful implications for the way we understand copyright’s role in the creative industries, and the potential for established institutions and infrastructure to support the open and networked dynamics of a digital age.