Dual-process action of exercise on appetite control : increase in orexigenic drive but improvement in meal-induced satiety

Background: Exercise could contribute to weight loss by altering the sensitivity of the appetite regulatory system. Objective: The aim of this study was to assess the effects of 12 wk of mandatory exercise on appetite control. Design: Fifty-eight overweight and obese men and women [mean (±SD) body mass index (in kg/m2) = 31.8 ± 4.5, age = 39.6 ± 9.8 y, and maximal oxygen intake = 29.1 ± 5.7 mL · kg–1 · min–1] completed 12 wk of supervised exercise in the laboratory. The exercise sessions were designed to expend 2500 kcal/wk. Subjective appetite sensations and the satiating efficiency of a fixed breakfast were compared at baseline (week 0) and at week 12. An Electronic Appetite Rating System was used to measure subjective appetite sensations immediately before and after the fixed breakfast in the immediate postprandial period and across the whole day. The satiety quotient of the breakfast was determined by calculating the change in appetite scores relative to the breakfast's energy content. Results: Despite large variability, there was a significant reduction in mean body weight (3.2 ± 3.6 kg), fat mass (3.2 ± 2.2 kg), and waist circumference (5.0 ± 3.2 cm) after 12 wk. The analysis showed that a reduction in body weight and body composition was accompanied by an increase in fasting hunger and in average hunger across the day (P < 0.0001). Paradoxically, the immediate and delayed satiety quotient of the breakfast also increased significantly (P < 0.05). Conclusions: These data show that the effect of exercise on appetite regulation involves at least 2 processes: an increase in the overall (orexigenic) drive to eat and a concomitant increase in the satiating efficiency of a fixed meal.

A Conceptualisation of Courseware Development Process in Malaysian Educational Context

Multimedia-based learning has been accepted as an effective learning tool and has broadly prevailed in various types of education around the world. The Malaysian ministry of education has also adopted this information communication technology (ICT) as the means of an education reformation project called, ‘Smart School’ since 1998, aiming to improve all Malaysian Primary and Secondary students’ learning ability, attitudes, achievement, and further enhance teachers’ teaching performance. As a result, Malaysian Ministry of Education has distributed a number of interactive courseware of the key learning domains such as Mathematics, Science, Bahasa Melayu (Malay language), and English. According to recent reports by Malaysian Ministry of Education (MOE), however, the courseware has not been effectively used in schools, and many researchers point out there are vital issues concerning the interface and interaction design. Within this context, this paper presumes that one of the main reasons could derive from a structural aspect of the course development process that is devaluing or ignoring the importance of interface and interaction design. Therefore, it is imperative to conceptualise the courseware development process in terms of creating interactive and quality learning experiences through defining the stakeholders’ needs in terms of better learning and teaching. Within this context, this paper reviews the current development process and proposes a new concept called the interactive communication component which enables courseware developers to embed interactive and quality learning experiences into their courseware development process. The key objective is to provide opportunities to discuss the courseware development process from the different stakeholders’ perspectives of the educational courseware in a Malaysian context.

Stability and convergence of an implicit numerical method for the non-linear fractional reaction-subdiffusion process

In this paper, we consider the following non-linear fractional reaction–subdiffusion process (NFR-SubDP): Formula where f(u, x, t) is a linear function of u, the function g(u, x, t) satisfies the Lipschitz condition and 0Dt1–{gamma} is the Riemann–Liouville time fractional partial derivative of order 1 – {gamma}. We propose a new computationally efficient numerical technique to simulate the process. Firstly, the NFR-SubDP is decoupled, which is equivalent to solving a non-linear fractional reaction–subdiffusion equation (NFR-SubDE). Secondly, we propose an implicit numerical method to approximate the NFR-SubDE. Thirdly, the stability and convergence of the method are discussed using a new energy method. Finally, some numerical examples are presented to show the application of the present technique. This method and supporting theoretical results can also be applied to fractional integrodifferential equations.

Conceptual Modelling in 3D Virtual Worlds for Process Communication

Traditionally, conceptual modelling of business processes involves the use of visual grammars for the representation of, amongst other things, activities, choices and events. These grammars, while very useful for experts, are difficult to understand by naive stakeholders. Annotations of such process models have been developed to assist in understanding aspects of these grammars via map-based approaches, and further work has looked at forms of 3D conceptual models. However, no one has sought to embed the conceptual models into a fully featured 3D world, using the spatial annotations to explicate the underlying model clearly. In this paper, we present an approach to conceptual process model visualisation that enhances a 3D virtual world with annotations representing process constructs, facilitating insight into the developed model. We then present a prototype implementation of a 3D Virtual BPMN Editor that embeds BPMN process models into a 3D world. We show how this gives extra support for tasks performed by the conceptual modeller, providing better process model communication to stakeholders..

Internetalisation : the Internet's influence on international market growth in the firm's outward internationalisation process

It has been suggested that the Internet is the most significant driver of international trade in recent years to the extent that the term =internetalisation‘ has been coined (Bell, Deans, Ibbotson & Sinkovics, 2001; Buttriss & Wilkinson, 2003). This term is used to describe the Internet‘s affect on the internationalisation process of the firm. Consequently, researchers have argued that the internationalisation process of the firm has altered due to the Internet, hence is in need of further investigation. However, as there is limited research and understanding, ambiguity remains in how the Internet has influenced international market growth. Thus, the purpose of this study was to explore how the Internet influences firms‘ internationalisation process, specifically, international market growth. To this end, Internet marketing and international market growth theories are used to illuminate this ambiguity in the body of knowledge. Thus, the research problem =How and why does the Internet influence international market growth of the firm’ is justified for investigation. To explore the research question a two-stage approach is used. Firstly, twelve case studies were used to evaluate key concepts, generate hypotheses and to develop a model of Internetalisation for testing. The participants held key positions within their firm, so that rich data could be drawn from international market growth decision makers. Secondly, a quantitative confirmation process analysed the identified themes or constructs, using two hundred and twenty four valid responses. Constructs were evaluated through an exploratory factor analysis, confirmatory factor analysis and structural equation modelling process. Structural equation modelling was used to test the model of =internetalisation‘ to examine the interrelationships between the internationalisation process components: information availability, information usage, interaction communication, international mindset, business relationship usage, psychic distance, the Internet intensity of the firm and international market growth. This study found that the Internet intensity of the firm mediates information availability, information usage, international mindset, and business relationships when firms grow in international markets. Therefore, these results provide empirical evidence that the Internet has a positive influence on international information, knowledge, entrepreneurship and networks and these in turn influence international market growth. The theoretical contributions are three fold. Firstly, the study identifies a holistic model of the impact the Internet has had on the outward internationalisation of the firm. This contribution extends the body of knowledge pertaining to Internet international marketing by mapping and confirming interrelationships between the Internet, internationalisation and growth concepts. Secondly, the study highlights the broad scope and accelerated rate of international market growth of firms. Evidence that the Internet influences the traditional and virtual networks for the pursuit of international market growth extends the current understanding. Thirdly, this study confirms that international information, knowledge, entrepreneurship and network concepts are valid in a single model. Thus, these three contributions identify constructs, measure constructs in a multi-item capacity, map interrelationships and confirm single holistic model of ‗internetalisation‘. The main practical contribution is that the findings identified information, knowledge and entrepreneurial opportunities for firms wishing to maximise international market growth. To capitalise on these opportunities suggestions are offered to assist firms to develop greater Internet intensity and internationalisation capabilities. From a policy perspective, educational institutions and government bodies need to promote more applied programs for Internet international marketing. The study provides future researchers with a platform of identified constructs and interrelationships related to internetalisation, with which to investigate. However, a single study has limitations of generalisability; thus, future research should replicate this study. Such replication or cross validation will assist in the verification of scales used in this research and enhance the validity of causal predications. Furthermore, this study was undertaken in the Australian outward-bound context. Research in other nations, as well as research into inbound internationalisation would be fruitful.

Means of achieving Business Process Management success factors

Business Process Management (BPM) in recent years has become a highest priority area for most organizations. Since this concept is multidisciplinary, success in this endeavour requires considering different factors. A number of studies have been conducted to identify these factors; however, most are limited to the introduction of high-level factors or to the identification of the means of success within only a specific context. This paper presents a holistic framework of success factors as well as the associated means for achieving success. This framework introduces nine factors, namely culture, leadership, communication, Information Technology, strategic alignment, people, project management, performance measurement and methodology. Each of these factors are characterized further by defining some sub-constructs and under each sub construct the means for achieving success are also introduced. This framework including means for achieving success can be useful for BPM project stakeholders in adequately planning the initiative and checking the progress during the implementation.

User-designer collaboration during the early stage of the design process

As user involvement becomes a necessary part of the product development process, various ways of accessing users' latent needs have been developed and studied. Reviews of literatures in user involvement and product development have revealed that accessing users' latent needs and transferring them into design process could be facilitated by effectively implementing user-designer collaboration during the early stage of the design process. In this paper, various types of user-designer collaboration were observed and then distinct characteristics of user-designer collaboration were classified into three categories. 1) Passive objectivity, 2) workplace democratisation, and 3) shared contexts were observed as strategies for better user-designer collaboration, which have been employed in the area of user-centred design, user participatory design and design for experiencing. Based on the literature review, this paper proposed a basic collaboration mechanism between the users and the designers during the early stage of the design process and then discussed how its mechanism will help to describe the interactions between the users and the designers during the user involvement sessions.

Resolving painful emotional experience during psychodrama

Unresolved painful emotional experiences such as bereavement, trauma and disturbances in core relationships, are common presenting problems for clients of psychodrama or psychotherapy more generally. Emotional pain is experienced as a shattering of the sense of self and disconnection from others and, when unresolved, produces avoidant responses which inhibit the healing process. There is agreement across therapeutic modalities that exposure to emotional experience can increase the efficacy of therapeutic interventions. Moreno proposes that the activation of spontaneity is the primary curative factor in psychodrama and that healing occurs when the protagonist (client) engages with his or her wider social system and develops greater flexibility in response to that system. An extensive case-report literature describes the application of the psychodrama method in healing unresolved painful emotional experiences, but there is limited empirical research to verify the efficacy of the method or to identify the processes that are linked to therapeutic change. The purpose of this current research was to construct a model of protagonist change processes that could extend psychodrama theory, inform practitioners’ therapeutic decisions and contribute to understanding the common factors in therapeutic change. Four studies investigated protagonist processes linked to in-session resolution of painful emotional experiences. Significant therapeutic events were analysed using recordings and transcripts of psychodrama enactments, protagonist and director recall interviews and a range of process and outcome measures. A preliminary study (3 cases) identified four themes that were associated with helpful therapeutic events: enactment, the working alliance with the director and with group members, emotional release or relief and social atom repair. The second study (7 cases) used Comprehensive Process Analysis (CPA) to construct a model of protagonists’ processes linked to in-session resolution. This model was then validated across four more cases in Study 3. Five meta-processes were identified: (i) a readiness to engage in the psychodrama process; (ii) re-experiencing and insight; (iii) activating resourcefulness; (iv) social atom repair with emotional release and (v) integration. Social atom repair with emotional release involved deeply experiencing a wished-for interpersonal experience accompanied by a free flowing release of previously restricted emotion and was most clearly linked to protagonists’ reports of reaching resolution and to post session improvements in interpersonal relationships and sense of self. Acceptance of self in the moment increased protagonists’ capacity to generate new responses within each meta-process and, in resolved cases, there was evidence of spontaneity developing over time. The fourth study tested Greenberg’s allowing and accepting painful emotional experience model as an alternative explanation of protagonist change. The findings of this study suggested that while the process of allowing emotional pain was present in resolved cases, Greenberg’s model was not sufficient to explain the processes that lead to in-session resolution. The protagonist’s readiness to engage and activation of resourcefulness appear to facilitate the transition from problem identification to emotional release. Furthermore, experiencing a reparative relationship was found to be central to the healing process. This research verifies that there can be in-session resolution of painful emotional experience during psychodrama and protagonists’ reports suggest that in-session resolution can heal the damage to the sense of self and the interpersonal disconnection that are associated with unresolved emotional pain. A model of protagonist change processes has been constructed that challenges the view of psychodrama as a primarily cathartic therapy, by locating the therapeutic experience of emotional release within the development of new role relationships. The five meta-processes which are described within the model suggest broad change principles which can assist practitioners to make sense of events as they unfold and guide their clinical decision making in the moment. Each meta-process was linked to specific post-session changes, so that the model can inform the development of therapeutic plans for individual clients and can aid communication for practitioners when a psychodrama intervention is used for a specific therapeutic purpose within a comprehensive program of therapy.

Quality-aware business process management

Business Process Management (BPM) has emerged as a popular management approach in both Information Technology (IT) and management practice. While there has been much research on business process modelling and the BPM life cycle, there has been little attention given to managing the quality of a business process during its life cycle. This study addresses this gap by providing a framework for organisations to manage the quality of business processes during different phases of the BPM life cycle. This study employs a multi-method research design which is based on the design science approach and the action research methodology. During the design science phase, the artifacts to model a quality-aware business process were developed. These artifacts were then evaluated through three cycles of action research which were conducted within three large Australian-based organisations. This study contributes to the body of BPM knowledge in a number of ways. Firstly, it presents a quality-aware BPM life cycle that provides a framework on how quality can be incorporated into a business process and subsequently managed during the BPM life cycle. Secondly, it provides a framework to capture and model quality requirements of a business process as a set of measurable elements that can be incorporated into the business process model. Finally, it proposes a novel root cause analysis technique for determining the causes of quality issues within business processes.

Introducing a Business Process and Software Centric Approach for Enterprise System Teaching

To meet new challenges of Enterprise Systems that essentially go beyond the initial implementation, contemporary organizations seek employees with business process experts with software skills. Despite a healthy demand from the industry for such expertise, recent studies reveal that most Information Systems (IS) graduates are ill-equipped to meet the challenges of modern organizations. This paper shares insights and experiences from a course that is designed to provide a business process centric view of a market leading Enterprise System. The course, designed for both undergraduate and graduate students, uses two common business processes in a case study that employs both sequential and explorative exercises. Student feedback gained through two longitudinal surveys across two phases of the course demonstrates promising signs of the teaching approach.