Mini-Orb : A personal indoor climate preference feedback interface

The control of environmental factors in open-office environments, such as lighting and temperature is becoming increasingly automated. This development means that office inhabitants are losing the ability to manually adjust environmental conditions according to their needs. In this paper we describe the design, use and evaluation of MiniOrb, a system that employs ambient and tangible interaction mechanisms to allow inhabitants of office environments to maintain awareness of environmental factors, report on their own subjectively perceived office comfort levels and see how these compare to group average preferences. The system is complemented by a mobile application, which enables users to see and set the same sensor values and preferences, but using a screen-based interface. We give an account of the system’s design and outline the results of an in-situ trial and user study. Our results show that devices that combine ambient and tangible interaction approaches are well suited to the task of recording indoor climate preferences and afford a rich set of possible interactions that can complement those enabled by more conventional screen-based interfaces.

Integrated reporting and directors’ concerns about personal liability exposure: Law reform options

Integrated reporting () holds significant promise as a new reporting paradigm that is holistic, strategic, responsive, material, and relevant across multiple time frames. However, its uptake in Australia is being hampered by directors’ concerns about personal liability exposure, particularly for forward-looking statements that subsequently prove to be unfounded. This article seeks to illuminate the bases for these liability concerns by outlining the similarities between and the operating and financial review requirements under the Corporations Act 2001 (Cth), and the relevant grounds for liability for misleading and deceptive disclosures, and breach of directors’ duties. In light of this discussion, this article proposes four possible reform options, ranging from minor adaptations to the Framework to far-reaching reforms of the Corporations Act. As assurance is desirable to ensure that reliance can be placed on integrated reports, the development of a legal safe harbour for auditors of forward-looking information is also canvassed.

Identification of mechanism, PECARN risk factors and injury patterns in severe paediatric cervical spine injuries in Queensland

Introduction Canadian C spine rule and NEXUS criteria have identified risk factors for cervical spine injury in adults but not for children. PECARN has developed an 8 variable model for cervical spine injury in children. We sought to identify the mechanism, prevalence of PECARN risk factors, injury patterns, and management of severe Paediatric cervical spine injuries presenting to the major children’s hospitals in Brisbane, Australia. Methods This a retrospective study of the children with cervical spine injuries who presented directly or were referred to the major children’s hospitals in Brisbane over 5 years. Results There were 38 patients with 18 male and 20 female.The mean age was 8.6 years. They were divided into two groups according to their age, (Group 1 < =8 years had 18 (47%) patients, while group 2 (9-15 years) had 20 (53%) patients. Motor vehicle related injuries were the most common (61%) in Group 1 while it was sporting injuries (50%) in group 2. All patients in group 1 had upper cervical injury (C0-C2) while subaxial injuries were most common in group 2 (66.6%). 82% of the patients had 2 or more PECARN risk factors. 18 children (47%) had normal neurological assessment at presentation, 6 (16%) had radicular symptoms, 11 (29%) could not be assessed as they had already been intubated due to the severity of the injury, 3 (8%) had incomplete cord injury. 29 (69%) patients had normal neurological assessment at final follow up and 2 children died from their injuries. Conclusion Our study confirms that younger children sustain upper cervical injuries most commonly secondary to motor vehicle accidents, while the older sustain subaxial injuries from sporting activities. The significant prevalence of the PECARN risk factors among this cohort of patients have led to them being incorporated into a protocol at these hospitals used to assess patients with suspected cervical spinal injury.

How useful are x-rays in severe paediatric cervical spinal injuries?

INTRODUCTION Radiological evaluation of the paediatric cervical spine can be a challenge due to the normal anatomic variants and injuries that are unique to children. We aimed to identify the usefulness of plain X-rays in comparison with CT and MRI in diagnosing Paediatric cervical spinal injuries. METHODS Retrospective review of imaging studies of children diagnosed with paediatric cervical spine injuries who had presented to two tertiary hospitals in Queensland. RESULTS There were 38 patients with 18 male and 20 female .The mean age was 8.6 years. Plain Cervical Spine X-rays (3views, AP lateral and open mouth views) were done in 34 patients. The remaining 8 children had a suspected head injury and hence had CT scans of their neck done at the time of CT head scan. Of these images taken, X-rays were diagnostic in 28 (82%) patients. CONCLUSION X- Rays still have a role to play in the diagnosis of pediatric cervical spinal injuries and should be considered as the first line in fully conscious patients and their usefulness should not be overlooked in light of the newer imaging modalities.

Caught in the act of collaboration: Students’ experiences of collective learning within a real-world design studio context

This study is an evaluation of design students’ perceptions of the benefits of collective learning in a real-world collaborative design studio. Third year students worked in inter-disciplinary teams representing architecture, interior design, landscape architecture, and industrial design. Responding to a real-world brief and in consultation with an industry partner client and early childhood education pre-service teachers, the teams were required to collectively propose a design response for a community-based child and family centre, on an iconic koala sanctuary site. Data were collected using several methods including a participatory action research method, through the form of a large analogue, collaborative jigsaw puzzle. Using a grounded theory methodology, qualitative data were thematically analysed to reveal six distinct aspects of collaboration, which positively impacted the students’ learning experience. The results of this study include recommendations for improving real world collaboration in the design studio in preparation for students’ transition into professional practice.

'But I've never sent them any personal details apart from my driver's licence number...': Exploring seniors' attitudes towards identity crime

Identity crime is argued to be one of the most significant crime problems of today. This paper examines identity crime, through the attitudes and practices of a group of seniors in Queensland, Australia. It examines their own actions towards the protection of their personal data in response to a fraudulent email request. Applying the concept of a prudential citizen (as one who is responsible for self-regulating their behaviour to maintain the integrity of one’s identity) it will be argued that seniors often expose identity information through their actions. However, this is demonstrated to be the result of flawed assumptions and misguided beliefs over the perceived risk and likelihood of identity crime, rather than a deliberate act. This paper concludes that to protect seniors from identity crime, greater awareness of appropriate risk-management strategies towards disclosure of their personal details is required to reduce their inadvertent exposure to identity crime.

Use of personal mobility devices for first-and-last mile travel: The Macquarie-Ryde trial

Electric-motored personal mobility devices (PMDs) are appearing on Australian roads. While legal to import and own, their use is typically illegal for adult riders within the road transport system. However, these devices could provide an answer to traffic congestion by getting people out of cars for short trips (“first-and-last mile” travel). City of Ryde council, Macquarie University, and Transport for NSW examined PMD use within the road transport system. Stage 1 of the project examined PMD use within a controlled pedestrian environment on the Macquarie University campus. Three PMD categories were used: one-wheelers (an electric unicycle, the Solowheel); two-wheelers (an electric scooter, the Egret); and three-wheelers (the Qugo). The two-wheeled PMD was most effective in terms of flexibility. In contrast, the three-wheeled PMD was most effective in terms of speed. One-wheeled PMD riders were very satisfied with their device, especially at speed, but significant training and practice was required. Two-wheeled PMD riders had less difficulty navigating through pedestrian precincts and favoured the manoeuvrability of the device as the relative narrowness of the two-wheeled PMD made it easier to use on a diversity of path widths. The usability of all PMDs was compromised by the weight of the devices, difficulties in ascending steeper gradients, portability, and parking. This was a limited trial, with a small number of participants and within a unique environment. However, agreement has been reached for a Stage 2 extension into the Macquarie Park business precinct for further real-world trials within a fully functional road transport system.

How serious are they? The use of data linkage to explore different definitions of serious road crash injuries

Over recent years, the focus in road safety has shifted towards a greater understanding of road crash serious injuries in addition to fatalities. Police reported crash data are often the primary source of crash information; however, the definition of serious injury within these data is not consistent across jurisdictions and may not be accurately operationalised. This study examined the linkage of police-reported road crash data with hospital data to explore the potential for linked data to enhance the quantification of serious injury. Data from the Queensland Road Crash Database (QRCD), the Queensland Hospital Admitted Patients Data Collection (QHAPDC), Emergency Department Information System (EDIS), and the Queensland Injury Surveillance Unit (QISU) for the year 2009 were linked. Nine different estimates of serious road crash injury were produced. Results showed that there was a large amount of variation in the estimates of the number and profile of serious road crash injuries depending on the definition or measure used. The results also showed that as the definition of serious injury becomes more precise the vulnerable road users become more prominent. These results have major implications in terms of how serious injuries are identified for reporting purposes. Depending on the definitions used, the calculation of cost and understanding of the impact of serious injuries would vary greatly. This study has shown how data linkage can be used to investigate issues of data quality. It has also demonstrated the potential improvements to the understanding of the road safety problem, particularly serious injury, by conducting data linkage.

Submission on NSW Attorney-General's Discussion Paper on Amendment of Limitation of Actions Act 1969 to remove time limit for civil claims for child abuse

The New South Wales Attorney-General and Justice Policy Division released a Discussion Paper about reform of the Limitation of Actions Act 1969. The key question was whether and how to amend the statute to better provide access to justice for civil claimants in child abuse cases. This submission draws on published literature and multidisciplinary research to support the Discussion Paper's Option A, namely, to abolish the time limit for civil claims for injuries in criminal child abuse cases, and for this to be made retrospective.

Laboratories transformation

BACKGROUND OR CONTEXT Laboratories provide the physical spaces for engineering students to connect with theory and have a personal hands-on learning experience. Learning space design and development is well established in many universities however laboratories are often not part of that movement. While active, collaborative and group learning pedagogies are all key words in relation to these new spaces the concepts have always been central to laboratory based learning. The opportunity to build on and strengthen good practice in laboratories is immense. In the 2001 review “Universities in Crisis” many references are made to the decline of laboratories. One such comment in the review was made by Professor Ian Chubb (AVCC), who in 2013, as Chief Scientist for Australia, identifies the national concern about STEM education and presents a strategic plan to address the challenges ahead. What has been achieved and changed in engineering teaching and research laboratories in this time? PURPOSE OR GOAL A large number of universities in Australia and New Zealand own laboratory and other infrastructure designed well for the era they were built but now showing signs of their age, unable to meet the needs of today’s students, limiting the effectiveness of learning outcomes and presenting very low utilisation rates. This paper will present a model for new learning space design that improves student experience and engagement, supporting academic aims and significantly raising the space utilisation rate. APPROACH A new approach in laboratory teaching and research including new management has been adopted by the engineering disciplines at QUT. Flexibility is an underpinning principle along with the modularisation of fixed teaching and learning equipment, high utilisation of spaces and dynamic pedagogical approaches. The revitalised laboratories and workshop facilities are used primarily for the engineering disciplines and increasingly for integrated use across many disciplines in the STEM context. The new approach was built upon a base of an integrated faculty structure from 2005 and realised in 2010 as an associated development with the new Science and Engineering Centre (SEC). Evaluation through student feedback surveys for practical activities, utilisation rate statistics and uptake by academic and technical staff indicate a very positive outcome. DISCUSSION Resulting from this implementation has been increased satisfaction by students, creation of social learning and connecting space and an environment that meets the needs and challenges of active, collaborative and group learning pedagogies. Academic staff are supported, technical operations are efficient and laboratories are effectively utilised. RECOMMENDATIONS/IMPLICATIONS/CONCLUSION Future opportunities for continuous improvement are evident in using the student feedback to rectify faults and improve equipment, environment and process. The model is easily articulated and visible to other interested parties to contribute to sector wide development of learning spaces.

Forgery attacks on ++AE authenticated encryption mode

In this paper, we analyse a block cipher mode of operation submitted in 2014 to the cryptographic competition for authenticated encryption (CAESAR). This mode is designed by Recacha and called ++AE (plus-plus-ae). We propose a chosen plaintext forgery attack on ++AE that requires only a single chosen message query to allow an attacker to construct multiple forged messages. Our attack is deterministic and guaranteed to pass ++AE integrity check. We demonstrate the forgery attack using 128-bit AES as the underlying block cipher. Hence, ++AE is insecure as an authenticated encryption mode of operation.

Proceedings of the 2nd Workshop on (Re)Creating Lively Cities Through Ambient Technology in Arts, Culture and Gastronomic Experiences

Digital and interactive technologies are becoming increasingly embedded in everyday lives of people around the world. Application of technologies such as real-time, context-aware, and interactive technologies; augmented and immersive realities; social media; and location-based services has been particularly evident in urban environments where technological and sociocultural infrastructures enable easier deployment and adoption as compared to non-urban areas. There has been growing consumer demand for new forms of experiences and services enabled through these emerging technologies. We call this ambient media, as the media is embedded in the natural human living environment. This workshop focuses on ambient media services, applications, and technologies that promote people’s engagement in creating and recreating liveliness in urban environments, particularly through arts, culture, and gastronomic experiences. The RelCi workshop series is organized in cooperation with the Queensland University of Technology (QUT), in particular the Urban Informatics Lab and the Tampere University of Technology (TUT), in particular the Entertainment and Media Management (EMMi) Lab. The workshop runs under the umbrella of the International Ambient Media Association (AMEA) (http://www.ambientmediaassociation.org), which is hosting the international open access journal entitled “International Journal on Information Systems and Management in Creative eMedia”, and the international open access series “International Series on Information Systems and Management in Creative eMedia” (see http://www.tut.fi/emmi/Journal). The RelCi workshop took place for the first time in 2012 in conjunction with ICME 2012 in Melbourne, Autralia; and this year’s edition took place in conjunction with INTERACT 2013 in Cape Town, South Africa. Besides, the International Ambient Media Association (AMEA) organizes the Semantic Ambient Media (SAME) workshop series, which took place in 2008 in conjunction with ACM Multimedia 2008 in Vancouver, Canada; in 2009 in conjunction with AmI 2009 in Salzburg, Austria; in 2010 in conjunction with AmI 2010 in Malaga, Spain; in 2011 in conjunction with Communities and Technologies 2011 in Brisbane, Australia; in 2012 in conjunction with Pervasive 2012 in Newcastle, UK; and in 2013 in conjunction with C&T 2013 in Munich, Germany.

Decision fusion for reliable flood mapping using remote sensing images

Flood extent mapping is a basic tool for flood damage assessment, which can be done by digital classification techniques using satellite imageries, including the data recorded by radar and optical sensors. However, converting the data into the information we need is not a straightforward task. One of the great challenges involved in the data interpretation is to separate the permanent water bodies and flooding regions, including both the fully inundated areas and the wet areas where trees and houses are partly covered with water. This paper adopts the decision fusion technique to combine the mapping results from radar data and the NDVI data derived from optical data. An improved capacity in terms of identifying the permanent or semi-permanent water bodies from flood inundated areas has been achieved. Computer software tools Multispec and Matlab were used.

Social Living Labs for Digital Participation: Designing with Regional and Rural Communities [workshop proceedings]

“Fostering digital participation through Living Labs in regional and rural Australian communities,” is a three year research project funded by the Australian Research Council. The project aims to identify the specific digital needs and practices of regional and rural residents in the context of the implementation of high speed internet. It seeks to identify new ways for enabling residents to develop their digital confidence and skills both at home and in the community. This two-day symposium will bring together researchers and practitioners from diverse backgrounds to discuss design practices in social living labs that aim to foster digital inclusion and participation. Day one will consist of practitioner and research reports, while day two will provide an opportunity for participants to imagine and design future digital participation strategies. Academic participants will also have an opportunity to contribute to a refereed edited volume by Chandos Publishing (an imprint of Elsevier).

Child sexual abuse and access to justice for civil claims: Time to reform the Limitation of Actions Act 1974 (Qld)

In 2015, Victoria passed laws removing the time limit in which a survivor of child sexual abuse can commence a civil claim for personal injury. The law applies also to physical abuse, and to psychological injury arising from those forms of abuse. In 2016, New South Wales made almost identical legal reforms. These reforms were partly motivated by the recommendations of inquiries into institutional child abuse. Of particular relevance is that the Australian Royal Commission Into Institutional Responses to Child Sexual Abuse recommended in 2015 that all States and Territories remove their time limits for civil claims. This presentation explores the problems with standard time limits when applied to child sexual abuse cases (whether occurring within or beyond institutions), the scientific, ethical and legal justifications for lifting the time limits, and solutions for future law reform.