Psychotic symptom and cannabis relapse in recent-onset sychosis

Background Cannabis use appears to exacerbate psychotic symptoms and increase risk of psychotic relapse. However, the relative contribution of cannabis use compared with other risk factors is unclear. The influence of psychotic symptoms on cannabis use has received little attention. Aims To examine the influence of cannabis use on psychotic symptom relapse and the influence of psychotic symptom severity on relapse in cannabis use in the 6 months following hospital admission. Method At baseline, 84 participants with recent-onset psychosis were assessed and 81 were followed up weekly for 6 months, using telephone and face-to-face interviews. Results A higher frequency of cannabis use was predictive of psychotic relapse, after controlling for medication adherence, other substance use and duration of untreated psychosis. An increase in psychotic symptoms was predictive of relapse to cannabis use, and medication adherence reduced cannabis relapse risk. Conclusions The relationship between cannabis use and psychosis may be bidirectional, highlighting the need for early intervention programmes to target cannabis use and psychotic symptom severity in this population.

Modelling contractor's and subcontractor's trust : a system dynamics approach

A general mistrust within the contactor and subcontractor companies has identified one of the significant barriers to derive benefits from true downstream supply chain integration. Using the general theory of trust in inter-organizational relations and conducting interviews, this research discusses factors that influence development of trust and cooperation in contractor– subcontractor relationships in construction projects. System dynamics is the simulation method is selected in this theory-building effort, based on qualitative data collected from two projects of a construction company in Thailand. Performance, permeability and system based trust are found to make significant contributions toward parties’ trust level. Three strategic policies such as best value contracting, management of subcontractors as internal team and semi project partnering approach are recommended to stimulate the trust factors as well as cooperative long term relationship.

The effectiveness of a short-term group music therapy intervention for young parents and their children

The quality of early life experiences are known to influence a child’s capacities for emotional, social, cognitive and physical competence throughout their life (Peterson, 1996; Zubrick et al., 2008). These early life experiences are directly affected by parenting and family environments. A lack of positive parenting has significant implications both for children, and the broader communities in which they live (Davies & Cummings, 1994; Dryfoos, 1990; Sanders, 1995). Young parents are known to be at risk of experiencing adverse circumstances that affect their ability to provide positive parenting to their children (Milan et al., 2004; Trad, 1995). There is a need to provide parenting support programs to young parents that offer opportunities for them to come together, support each other and learn ways to provide for their children’s developmental needs in a friendly, engaging and non-judgemental environment. This research project examines the effectiveness of a 10 week group music therapy program Sing & Grow as an early parenting intervention for 535 young parents. Sing & Grow is a national early parenting intervention program funded by the Australian Government and delivered by Playgroup Queensland. It is designed and delivered by Registered Music Therapists for families at risk of marginalisation with children aged from birth to three years. The aim of the program is to improve parenting skills and parent-child interactions, and increase social support networks through participation in a group that is strengths-based and structured in a way that lends itself to modelling, peer learning and facilitated learning. During the 10 weeks parents have opportunities to learn practical, hands-on ways to interact and play with their children that are conducive to positive parent-child relationships and ongoing child development. A range of interactive, nurturing, stimulating and developmental music activities provide the framework for parents to interact and play with their children. This research uses data collected through the Sing & Grow National Evaluation Study to examine outcomes for all participants aged 25 years and younger, who attended programs during the Sing & Grow pilot study and main study from mid-2005 to the end of 2007. The research examines the change from pre to post in self-reported parent behaviours, parent mental health and parent social support, and therapist observed parent-child interactions. A range of statistical analyses are used to address each Research Objective for the young parent population, and for subgroups within this population. Research Objective 1 explored the patterns of attendance in the Sing & Grow program for young parents, and for subgroups within this population. Results showed that levels of attendance were lower than expected and influenced by Indigenous status and source of family income. Patterns of attendance showed a decline over time and incomplete data rates were high which may indicate high dropout rates. Research Objective 2 explored perceived satisfaction, benefits and social support links made. Satisfaction levels with the program and staff were very high. Indigenous status was associated with lower levels of reported satisfaction with both the program and staff. Perceived benefits from participation in the program were very high. Employment status was associated with perceived benefits: parents who were not employed were more likely than employed parents to report that their understanding of child development had increased as a result of participation in the program. Social support connections were reported for participants with other professionals, services and parents. In particular, families were more likely to link up with playgroup staff and services. Those parents who attended six or more sessions were significantly more likely to attend a playgroup than those who attended five sessions or less. Social support connections were related to source of family income, level of education, Indigenous status and language background. Research Objective 3 investigated pre to post change on self-report parenting skills and parent mental health. Results indicated that participation in the Sing & Grow program was associated with improvements in parent mental health. No improvements were found for self-reported parenting skills. Research Objective 4 investigated pre to post change in therapist observation measures of parent-child interactions. Results indicated that participation in the Sing & Grow program was associated with large and significant improvements in parent sensitivity to, engagement with and acceptance of the child. There were significant interactions across time (pre to post) for the parent characteristics of Indigenous status, family income and level of education. Research Objective 5 explored the relationship between the number of sessions attended and extent of change on self-report outcomes and therapist observed outcomes, respectively. For each, an overall change score was devised to ascertain those parents who had made any positive changes over time. Results showed that there was no significant relationship between high attendance and positive change in either the self-report or therapist observed behavioural measures. A risk index was also constructed to test for a relationship between the risk status of the parent. Parents with the highest risk status were significantly more likely to attend six or more sessions than other parents, but risk status was not associated with any differences in parent reported outcomes or therapist observations. The results of this research study indicate that Sing & Grow is effective in improving outcomes for young parents’ mental health, parent-child interactions and social support connections. High attendance by families in the highest category for risk factors may indicate that the program is effective at engaging and retaining parents who are most at-risk and therefore traditionally hard to reach. Very high levels of satisfaction and perceived benefits support this. Further research is required to help confirm the promising evidence from the current study that a short term group music therapy program can support young parents and improve their parenting outcomes. In particular, this needs to address the more disappointing outcomes of the current research study to improve attendance and engagement of all young parents in the program and especially the needs of young Indigenous parents.

Peer state assessment of TxDOT maintenance program and practices, part II : test section survey findings and recommendations

This paper presents a road survey as part of a workshop conducted by the Texas Department of Transportation (TxDOT) to evaluate and improve the maintenance practices of the Texas highway system. Directors of maintenance from six peer states (California, Kansas, Georgia, Missouri, North Carolina, and Washington) were invited to this 3-day workshop. One of the important parts of this workshop was a Maintenance Test Section Survey (MTSS) to evaluate a number of pre-selected one-mile roadway sections. The workshop schedule allowed half a day to conduct the field survey and 34 sections were evaluated. Each of the evaluators was given a booklet and asked to rate the selected road sections. The goals of the MTSS were to: 1. Assess the threshold level at which maintenance activities are required as perceived by the evaluators from the peer states; 2. Assess the threshold level at which maintenance activities are required as perceived by evaluators from other TxDOT districts; and 3. Perform a pilot evaluation of the MTSS concept. This paper summarizes the information obtained from survey and discusses the major findings based on a statistical analysis of the data and comments from the survey participants.

Managing innovative change within organisations and project team environments

In an attempt to enhance the efficiency, productivity and competitiveness of today’s Architectural, Engineering, and Contractor (AEC) industry, this paper summarises the current status of an ongoing PhD research investigation in developing a sustainable AEC industry specific best-practice ‘Innovation-driven Change Framework’—more specifically a summation of the ‘fourth interrelated dynamic’ (culture). Leveraging off the outcomes of a two year industry and government supported Cooperative Research Centre for Construction Innovation (CRCCI) research project, as well as referring to recent internationally renowned case studies and related literature investigations, this research investigation includes further identifying, processing, analysing and categorizing various culture change methods, models, frameworks and processes utilized within the AEC and other industry sectors, and incorporating these findings in developing an AEC industry-specific ‘Innovation-driven Change Framework’

Development of a high-speed sensing and detection system for automatic removal of packages with leaky seals from a high-speed food processing and packaging line

Contamination of packaged foods due to micro-organisms entering through air leaks can cause serious public health issues and cost companies large amounts of money due to product recalls, consumer impact and subsequent loss of market share. The main source of contamination is leaks in packaging which allow air, moisture and microorganisms to enter the package. In the food processing and packaging industry worldwide, there is an increasing demand for cost effective state of the art inspection technologies that are capable of reliably detecting leaky seals and delivering products at six-sigma. The new technology will develop non-destructive testing technology using digital imaging and sensing combined with a differential vacuum technique to assess seal integrity of food packages on a high-speed production line. The cost of leaky packages in Australian food industries is estimated close to AUD $35 Million per year. Contamination of packaged foods due to micro-organisms entering through air leaks can cause serious public health issues and cost companies large sums of money due to product recalls, compensation claims and loss of market share. The main source of contamination is leaks in packaging which allow air, moisture and micro-organisms to enter the package. Flexible plastic packages are widely used, and are the least expensive form of retaining the quality of the product. These packets can be used to seal, and therefore maximise, the shelf life of both dry and moist products. The seals of food packages need to be airtight so that the food content is not contaminated due to contact with microorganisms that enter as a result of air leakage. Airtight seals also extend the shelf life of packaged foods, and manufacturers attempt to prevent food products with leaky seals being sold to consumers. There are many current NDT (non-destructive testing) methods of testing the seal of flexible packages best suited to random sampling, and for laboratory purposes. The three most commonly used methods are vacuum/pressure decay, bubble test, and helium leak detection. Although these methods can detect very fine leaks, they are limited by their high processing time and are not viable in a production line. Two nondestructive in-line packaging inspection machines are currently available and are discussed in the literature review. The detailed design and development of the High-Speed Sensing and Detection System (HSDS) is the fundamental requirement of this project and the future prototype and production unit. Successful laboratory testing was completed and a methodical design procedure was needed for a successful concept. The Mechanical tests confirmed the vacuum hypothesis and seal integrity with good consistent results. Electrically, the testing also provided solid results to enable the researcher to move the project forward with a certain amount of confidence. The laboratory design testing allowed the researcher to confirm theoretical assumptions before moving into the detailed design phase. Discussion on the development of the alternative concepts in both mechanical and electrical disciplines enables the researcher to make an informed decision. Each major mechanical and electrical component is detailed through the research and design process. The design procedure methodically works through the various major functions both from a mechanical and electrical perspective. It opens up alternative ideas for the major components that although are sometimes not practical in this application, show that the researcher has exhausted all engineering and functionality thoughts. Further concepts were then designed and developed for the entire HSDS unit based on previous practice and theory. In the future, it would be envisaged that both the Prototype and Production version of the HSDS would utilise standard industry available components, manufactured and distributed locally. Future research and testing of the prototype unit could result in a successful trial unit being incorporated in a working food processing production environment. Recommendations and future works are discussed, along with options in other food processing and packaging disciplines, and other areas in the non-food processing industry.

Integrated approach for HP-LNG pump diagnosis and prognostics based on health state probability estimation

This paper presents an innovative prognostics model based on health state probability estimation embedded in the closed loop diagnostic and prognostic system. To employ an appropriate classifier for health state probability estimation in the proposed prognostic model, the comparative intelligent diagnostic tests were conducted using five different classifiers applied to the progressive fault levels of three faults in HP-LNG pump. Two sets of impeller-rubbing data were employed for the prediction of pump remnant life based on estimation of discrete health state probability using an outstanding capability of SVM and a feature selection technique. The results obtained were very encouraging and showed that the proposed prognosis system has the potential to be used as an estimation tool for machine remnant life prediction in real life industrial applications.

Digital human modelling for vehicle design and manufacturing

Digital human modelling (DHM) has today matured from research into industrial application. In the automotive domain, DHM has become a commonly used tool in virtual prototyping and human-centred product design. While this generation of DHM supports the ergonomic evaluation of new vehicle design during early design stages of the product, by modelling anthropometry, posture, motion or predicting discomfort, the future of DHM will be dominated by CAE methods, realistic 3D design, and musculoskeletal and soft tissue modelling down to the micro-scale of molecular activity within single muscle fibres. As a driving force for DHM development, the automotive industry has traditionally used human models in the manufacturing sector (production ergonomics, e.g. assembly) and the engineering sector (product ergonomics, e.g. safety, packaging). In product ergonomics applications, DHM share many common characteristics, creating a unique subset of DHM. These models are optimised for a seated posture, interface to a vehicle seat through standardised methods and provide linkages to vehicle controls. As a tool, they need to interface with other analytic instruments and integrate into complex CAD/CAE environments. Important aspects of current DHM research are functional analysis, model integration and task simulation. Digital (virtual, analytic) prototypes or digital mock-ups (DMU) provide expanded support for testing and verification and consider task-dependent performance and motion. Beyond rigid body mechanics, soft tissue modelling is evolving to become standard in future DHM. When addressing advanced issues beyond the physical domain, for example anthropometry and biomechanics, modelling of human behaviours and skills is also integrated into DHM. Latest developments include a more comprehensive approach through implementing perceptual, cognitive and performance models, representing human behaviour on a non-physiologic level. Through integration of algorithms from the artificial intelligence domain, a vision of the virtual human is emerging.

Numerical modelling and design of LiteSteel Beams subject to lateral buckling

The LiteSteel Beam (LSB) is a new hollow flange channel section developed using a patented dual electric resistance welding and cold-forming process. It has a unique geometry consisting of torsionally rigid rectangular hollow flanges and a slender web, and is commonly used as flexural members. However, the LSB flexural members are subjected to a relatively new lateral distortional buckling mode, which reduces their moment capacities. Unlike lateral torsional buckling, the lateral distortional buckling of LSBs is characterised by simultaneous lateral deflection, twist and cross sectional change due to web distortion. Therefore a detailed investigation into the lateral buckling behaviour of LSB flexural members was undertaken using experiments and finite element analyses. This paper presents the details of suitable finite element models developed to simulate the behaviour and capacity of LSB flexural members subject to lateral buckling. The models included all significant effects that influence the ultimate moment capacities of such members, including material inelasticity, lateral distortional buckling deformations, web distortion, residual stresses, and geometric imperfections. Comparison of elastic buckling and ultimate moment capacity results with predictions from other numerical analyses and available buckling moment equations, and experimental results showed that the developed finite element models accurately predict the behaviour and moment capacities of LSBs. The validated model was then used in a detailed parametric study that produced accurate moment capacity data for all the LSB sections and improved design rules for LSB flexural members subject to lateral distortional buckling.

Shikumidukuri vs. one best (no) way! Project and Programme Management for Enterprise Innovation (P2M) : towards a new paradigm?

The purpose of this paper is to investigate the Japanese answer to the 90’s depression by (i). presenting a case study of the framework developed to address the new business challenges and value creation in complex, ambiguous and uncertain environment, i.e., Development of Project and Programme Management for Enterprise Innovation (P2M) and Project Management Association Japan (PMAJ) in Japan; and (ii). Exposing what in our view are the underlying theoretical bases supporting this framework and from this drawing some theoretical lessons learnt which could be helpful to the development of sound PM standards and PM competence model. This theoretical approach is assumed to be useful to transpose the Japanese experience to other analogical contexts and situations.

It’s okay to ask : development and pilot testing of a question prompt list for patients with brain tumours

Background: Previous research identified that primary brain tumour patients have significant psychological morbidity and unmet needs, particularly the need for more information and support. However, the utility of strategies to improve information provision in this setting is unknown. This study involved the development and piloting of a brain tumour specific question prompt list (QPL). A QPL is a list of questions patients may find useful to ask their health professionals, and is designed to facilitate communication and information exchange. Methods: Thematic analysis of QPLs developed for other chronic diseases and brain tumour specific patient resources informed a draft QPL. Subsequent refinement of the QPL involved an iterative process of interviews and review with 12 recently diagnosed patients and six caregivers. Final revisions were made following readability analyses and review by health professionals. Piloting of the QPL is underway using a non-randomised control group trial with patients undergoing treatment for a primary brain tumour in Brisbane, Queensland. Following baseline interviews, consenting participants are provided with the QPL or standard information materials. Follow-up interviews four to 6 weeks later allow assessment of the acceptability of the QPL, how it is used by patients, impact on information needs, and feasibility of recruitment, implementation and outcome assessment. Results: The final QPL was determined to be readable at the sixth grade level. It contains seven sections: diagnosis, prognosis, symptoms and changes, the health professional team, support, treatment and management, and post-treatment concerns. At this time, fourteen participants have been recruited for the pilot, and data collection completed for eleven. Data collection and preliminary analysis are expected to be completed by and presented at the conference. Conclusions: If acceptable to participants, the QPL may encourage patients, doctors and nurses to communicate more effectively, reducing unmet information needs and ultimately improving psychological wellbeing.

Creative suburbia : cultural research and suburban geographies

Suburbanisation today is not necessarily what it used to be: rather than suburbs being outer urban commuter zones for people who work in the central business district, people living in new suburbs are increasingly likely to work in those suburbs, or to commute to other outer suburbs as their places of work. At one level, such trends affirm the analyses of the ‘Los Angeles School’ of urban geographers about the shift from the classical modernist city, with radial zones spreading out from a city centre where core businesses were located, to a more decentralised, ‘postmodern’ city. But they increasingly move beyond this postmodern perspective, in that the many suburbs are themselves centres of work and industry, and not simply centres of lifestyle and consumption. This article critically reflects upon the contemporary dynamics of the suburbs, and the public discourses that surround their development, in the context of the rise of the creative industries.

Creativity and the Australian suburbs : the appeal of suburban localities for the creative industries workforce

The locus of creative inspiration and production is commonly associated with either the dynamism of the inner city or with the natural landscape, with its Arcadian transformative associations. This article considers the spatiality of creative work in an in-between site: the outer suburbs in Australia. The outer suburbs occupy a conflicted status in the national imaginary: frequently regarded as the locus of consumption and materialism, they are localities which few associate with creativity or creative industries. Creative city discourse further instils the idea that all things creative occur only in the inner city. Yet Australia is a highly suburbanised country: the middle and outer suburbs are where most Australians live and work. This article challenges the perception that creativity is spatially clustered in the inner city. It is based on empirical and qualitative research that maps and investigates the experience of creative industries workers in outer-suburban localities of Brisbane and Melbourne. One of the key findings is the significance of the relationship between work and place for creative workers located in outer-suburban localities, rupturing assumptions about suburbia and “creative” inner-city enclaves.

(Dia)logics of difference disability, performance and spectatorship in Liz Crow's Resistance on the Plinth

In this article I examine how artists with disabilities use public-space performance to encourage passersby to reflect on the construction of public discourses about disability – and, therefore, the construction of publics that are potentially inclusive of people with disabilities. I concentrate on British storyteller, artist, filmmaker and activist Liz Crow's Resistance on the Plinth, one of four pieces Crow has produced over the past three years as part of the Resistance series, an examination of the Nazi regime's Aktion T4 programme, which resulted in the mass murder of a quarter of a million people with disabilities. Created in August 2009 as part of Antony Gormley's One & Other public art project, the piece featured Crow dressed in a Nazi uniform and seated in a wheelchair on the Fourth Plinth in London's Trafalgar Square. For Crow – who creates work in a British context where public debate about the eugenics of genetic testing, euthanasia and assisted suicide is prevalent in the media – the Nazi atrocity is still rich in confronting imagery, resonant and relevant in a contemporary context. In this article, I consider the challenges that Gormley's extremely public One & Other presented for professional artists like Crow, who are committed to intervening in public perceptions of identity, community and culture. I describe the structural choices Crow made to provoke debate about the cultural logics embodied in the image she presented, and analyse some of the spectatorial responses from online forums such as the One & Other website, Facebook and Twitter immediately following the event.