Heat effects of promoters and determination of burn criterion in promoted combustion testing

Promoted ignition testing (NASA) Test 17) [1] is used to determine the relative flammability of metal rods in oxygen-enriched atmospheres. A promotor is used to ignite a metal sample rod, initiating sample burning. If a predetermined length of the sample burns, beyond the promotor, the material is considered flammable at the condition tested. Historically, this burn length has been somewhat arbitrary. Experiments were performed to better understand this test by obtaining insight into the effect a burning promotor has on the preheating of a test sample. Test samples of several metallic materials were prepared and coupled to fast-responding thermocouples along their length. Thermocouple measurements and test video were synchronized to determine temperature increase with respect to time and length along each test sample. A recommended flammability burn length, based on a sample preheat of 500 degrees fahrenheit, was determined based on the preheated zone measured from these tests. This length was determined to be 30 mm (1.18 in.). Validation of this length and its rationale are presented.

Shifting the technology context : career-change entrants’ transition into teaching

Becoming a teacher in technology-rich classrooms is a complex and challenging transition for career-change entrants. Those with generic or specialist Information and Communication Technology (ICT) expertise bring a mindset about purposeful uses of ICT that enrich student learning and school communities. The transition process from a non-education environment is both enhanced and constrained by shifting the technology context of generic or specialist ICT expertise, developed through a former career as well as general life experience. In developing an understanding of the complexity of classrooms and creating a learner centred way of working, perceptions about learners and learning evolve and shift. Shifts in thinking about how ICT expertise supports learners and enhances learning preceded shifts in perceptions about being a teacher, working with colleagues, and functioning in schools that have varying degrees of intensity and impact on evolving professional identities. Current teacher education and school induction programs are seen to be falling short of meeting the needs of career-change entrants and, as a flow on, the students they nurture. Research (see, for example, Tigchelaar, Brouwer, & Korthagen, 2008; Williams & Forgasz, 2009) highlights the value of generic and specialist expertise career-change teachers bring to the profession and draws attention to the challenges such expertise begets (Anthony & Ord, 2008; Priyadharshini & Robinson-Pant, 2003). As such, the study described in this thesis investigated perceptions of career-change entrants, who have generic (Mishra & Koehler, 2006) or specialist expertise, that is, ICT qualifications and work experience in the use of ICT. The career-change entrants‘ perceptions were sought as they shifted the technology context and transitioned into teaching in technology-rich classrooms. The research involved an interpretive analysis of qualitative data and quantitative data. The study used the explanatory case study (Yin, 1994) methodology enriched through grounded theory processes (Strauss & Corbin, 1998), to develop a theory about professional identity transition from the perceptions of the participants in the study. The study provided insights into the expertise and experiences of career change entrants, particularly in relation to how professional identities that include generic and specialist ICT knowledge and expertise were reconfigured while transitioning into the teaching profession. This thesis presents the Professional Identity Transition Theory that encapsulates perceptions about teaching in technology-rich classrooms amongst a selection of the increasing number of career-change entrants. The theory, grounded in the data, (Strauss & Corbin, 1998) proposes that career-change entrants experience transition phases of varying intensity that impact on professional identity, retention and development as a teacher. These phases are linked to a shift in perceptions rather than time as a teacher. Generic and specialist expertise in the use of ICT is a weight of the past and an asset that makes the transition process more challenging for career-change entrants. The study showed that career-change entrants used their experiences and perceptions to develop a way of working in a school community. Their way of working initially had an adaptive orientation focussed on immediate needs as their teaching practice developed. Following a shift of thinking, more generative ways of working focussed on the future emerged to enable continual enhancement and development of practice. Sustaining such learning is a personal, school and systemic challenge for the teaching profession.

An efficient approach for the direct synthesis of lithium niobate powders

Lithium niobate powders from the raw powders of Li2 O5 are directly synthesized by a combustion method with urea fuel. The synthesis parameters (e.g. the calcination temperature, calcination time, and urea-to-(Li2 CO3 + Nb2 O5) quantity ratio) are studied to reveal the optimized synthesis conditions for preparing high-quality lithium niobate powders. In our present work, it is found that a urea-to-(Li2 CO3 + Nb2 O5) ratio close to 3, calcination temperature at 550-600 degrees and reaction time around 2.5h may lead to high-quality lithium niobate powsers. The microstructure of synthesized powders is further studied; a possible mechanism of the involved reactions is also proposed.

Preparation of porous calcium phosphate ceramic scaffold in bone tissue engineering

Calcium Phosphate ceramic has been widely used in bone tissue engineering due to its excellent biocompatibility and biodegradability. However, low mechanical properties and biodegradability limit their potential applications. In this project, hydroxyapatite (HA) and calcium phosphate bioglass were used to produce porous tri-calcium phosphate (TCP) bio-ceramic scaffolds. It was found that porous TCP bioceramic could be obtained when 20wt percent bioglass addition and sintered in 1400 degrees celsius for 3 h. Significantly higher compressive strength (9.98 MPa) was achieved in the scaffolds as compared to those produced from tCP power (<3 MPa). The biocompatibility of the scaffold was also estimated.

Facile synthesis of Lithium Niobate squares by a combustion route

A combustion synthesis of lithium niobate (LN) squares from activated niobium oxide (Nb2 O5.nH2O) and Li2CO3 was studied to understand all the chemical reactions involved, and the nucleation and square-growth mechanisms. It was found that first the lithium ions react with the fuel (urea), then niobium ions of Nb2 O5.nH2O begin a continuous reaction with the fuel to form metal-organic complexes. LN nuclei are formed by the solid-state reaction of Li- and Nb-organic complexes at 430 degrees celcius. Lithium niobate squares are obtained in the crystallization stasge at 700 degrees celcius, which go on the grow into larger squares at 850 degrees celcius because of the agglomeration effect.

Ultrafast near infrared sintering of TiO2 layers on metal substrates for dye-sensitized solar cells

A limiting step to roll-to-roll production of dye-sensitized solar cells on metals is TiO2 sintering (10-30 min). Near infrared (NIR) heating is a novel process innovation which directly heats titanium substrates giving rapid binder removal and sintering. NIR heating (for 12.5 s) at varying power gave titanium temperatures of 545, 685 and 817 degrees Celsius yielding cells with efficiencies of 2.9, 2.8 and 2.5%. Identical cells prepared in a conventional oven (1800 s) at 500, 600 and 800 degrees Celsius gave 2.9, 2.6 and 0.2% efficiency. NIR sintering is ultrafast and has a wide process window making it ideal for rapid manufacturing on metals.

Patient-specific computational biomechanics for simulating adolescent scoliosis surgery : predicted vs clinical correction for a preliminary series of six patients

Scoliosis is a spinal deformity that requires surgical correction in progressive cases. In order to optimize surgical outcomes, patient-specific finite element models are being developed by our group. In this paper, a single rod anterior correction procedure is simulated for a group of six scoliosis patients. For each patient, personalised model geometry was derived from low-dose CT scans, and clinically measured intra-operative corrective forces were applied. However, tissue material properties were not patient-specific, being derived from existing literature. Clinically, the patient group had a mean initial Cobb angle of 47.3 degrees, which was corrected to 17.5 degrees after surgery. The mean simulated post-operative Cobb angle for the group was 18.1 degrees. Although this represents good agreement between clinical and simulated corrections, the discrepancy between clinical and simulated Cobb angle for individual patients varied between -10.3 and +8.6 degrees, with only three of the six patients matching the clinical result to within accepted Cobb measurement error of +-5 degrees. The results of this study suggest that spinal tissue material properties play an important role in governing the correction obtained during surgery, and that patient-specific modelling approaches must address the question of how to prescribe patient-specific soft tissue properties for spine surgery simulation.

Exposure of pipe insulation to high temperatures from domestic pumped storage (split) solar water heating systems in Australia and New Zealand

Pipe insulation between the collector and storage tank on pumped storage (commonly called split), solar water heaters can be subject to high temperatures, with a maximum equal to the collector stagnation temperature. The frequency of occurrence of these temperatures is dependent on many factors including climate, hot water demand, system size and efficiency. This paper outlines the findings of a computer modelling study to quantify the frequency of occurrence of pipe temperatures of 80 degrees Celsius or greater at the outlet of the collectors for these systems. This study will help insulation suppliers determine the suitability of their materials for this application. The TRNSYS program was used to model the performance of a common size of domestic split solar system, using both flat plate and evacuated tube, selective surface collectors. Each system was modelled at a representative city in each of the 6 climate zones for Australia and New Zealand, according to AS/NZS4234 - Heat Water Systems - Calculation of energy consumption, and the ORER RECs calculation method. TRNSYS was used to predict the frequency of occurrence of the temperatures that the pipe insulation would be exposed to over an average year, for hot water consumption patterns specified in AS/NZS4234, and for worst case conditions in each of the climate zones. The results show; * For selectively surfaced, flat plate collectors in the hottest location (Alice Sprints) with a medium size hot water demand according to AS/NZS2434, the annual frequency of occurrence of temperatures at and above 80 degrees Celsius was 33 hours. The frequency of temperatures at and above 140 degrees Celsius was insignificant. * For evacuated tube collectors in the hottest location (Alice Springs), the annual frequency of temperatures at and above 80 degrees Celsius was 50 hours. Temperatures at and above 140 degrees Celsius were significant and were estimated to occur for more than 21 hours per year in this climate zone. Even in Melbourne, temperatures at and above 80 degrees can occur for 12 hours per year and at and above 140 degrees for 5 hours per year. * The worst case identified was for evacuated tube collectors in Alice Springs, with mostly afternoon loads in January. Under these conditions, the frequency of temperatures at and above 80 degrees Celsius was 10 hours for this month only. Temperatures at and above 140 degrees Celsius were predicted to occur for 5 hours in January.

Validation and automation of the DYNJAWS component module of the BEAMnrc Monte Carlo code

The purpose of this work is to validate and automate the use of DYNJAWS; a new component module (CM) in the BEAMnrc Monte Carlo (MC) user code. The DYNJAWS CM simulates dynamic wedges and can be used in three modes; dynamic, step-and-shoot and static. The step-and-shoot and dynamic modes require an additional input file defining the positions of the jaw that constitutes the dynamic wedge, at regular intervals during its motion. A method for automating the generation of the input file is presented which will allow for the more efficient use of the DYNJAWS CM. Wedged profiles have been measured and simulated for 6 and 10 MV photons at three field sizes (5 cm x 5 cm , 10 cm x10 cm and 20 cm x 20 cm), four wedge angles (15, 30, 45 and 60 degrees), at dmax and at 10 cm depth. Results of this study show agreement between the measured and the MC profiles to within 3% of absolute dose or 3 mm distance to agreement for all wedge angles at both energies and depths. The gamma analysis suggests that dynamic mode is more accurate than the step-and-shoot mode. The DYNJAWS CM is an important addition to the BEAMnrc code and will enable the MC verification of patient treatments involving dynamic wedges.

Pressure, oxygen tension and temperature in the periosteal callus during bone healing - An in vivo study in sheep

Adequate blood supply and sufficient mechanical stability are necessary for timely fracture healing. Damage to vessels impairs blood supply; hindering the transport of oxygen which is an essential metabolite for cells involved in repair. The degree of mechanical stability determines the mechanical conditions in the healing tissues. The mechanical conditions can influence tissue differentiation and may also inhibit revascularization. Knowledge of the actual conditions in a healing fracture in vivo is extremely limited. This study aimed to quantify the pressure, oxygen tension and temperature in the external callus during the early phase of bone healing. Six Merino-mix sheep underwent a tibial osteotomy. The tibia was stabilized with a standard mono-lateral external fixator. A multi-parameter catheter was placed adjacent to the osteotomy gap on the medial aspect of the tibia. Measurements of oxygen tension and temperature were performed for ten days post-op. Measurements of pressure were performed during gait on days three and seven. The ground reaction force and the interfragmentary movements were measured simultaneously. The maximum pressure during gait increased (p=0.028) from three (41.3 [29.2-44.1] mm Hg) to seven days (71.8 [61.8-84.8] mm Hg). During the same interval, there was no change (p=0.92) in the peak ground reaction force or in the interfragmentary movement (compression: p=0.59 and axial rotation: p=0.11). Oxygen tension in the haematoma (74.1 mm Hg [68.6-78.5]) was initially high post-op and decreased steadily over the first five days. The temperature increased over the first four days before reaching a plateau at approximately 38.5 degrees C on day four. This study is the first to report pressure, oxygen tension and temperature in the early callus tissues. The magnitude of pressure increased even though weight bearing and IFM remained unchanged. Oxygen tensions were initially high in the haematoma and fell gradually with a low oxygen environment first established after four to five days. This study illustrates that in bone healing the local environment for cells may not be considered constant with regard to oxygen tension, pressure and temperature.

English language study abroad program : an investigation of Hong Kong pre-service teachers’ experiences of a language immersion program

There has been minimal research focused on short-term study abroad language immersion programs, in particular, with home-stay families. The importance of authentic intercultural experience is increasingly clear and was acknowledged as central to the process of language learning (Liddicoat, 2004). In Hong Kong, education programs for pre-service language teachers have significantly emphasised language and intercultural training through short-term study abroad, and these short overseas language immersion courses have become a compulsory component for teacher training (Bodycott & Crew, 2001) in the last decade. This study aims to investigate eight Hong Kong pre-service teachers’ and their home-stay families’ experiences of a short-term (two months) language immersion program in Australia. The focus is on listening to commentaries concerning the development of communicative competence, intercultural competence and professional growth during the out-of-class study abroad experience. The conceptual framework adopted in this study views language and intercultural learning from social constructivist perspectives. Central to this framing is the notion that the internalisation of higher mental functions involves the transfer from the inter-psychological to the intra-psychological plane, that is, a progression process from the socially supported to individually controlled performance. From this perspective, language serves as a way to communicate about, and in relation to, actions and experience. Three research questions were addressed and studied through qualitative methodology. 1. How do the pre-service teachers and their home-stay families perceive the out-of-class component of the program in terms of opportunities for the development of language proficiency and communicative competence? 2. How do the pre-service teachers and their home-stay families perceive the out-of-class component of the program in terms of the development of intercultural competence? 3. How do the pre-service teachers and home-stay families perceive the outof- class component of the program in terms of teachers’ professional growth? Data were generated from multiple data collection methods and analysed through thematic analysis from both a “bottom up” and “top down” approach. The study showed that the pre-service teachers perceived that the immersion program influenced, to varying degrees, their language proficiency, communication and intercultural awareness, as well as their self-awareness and professional growth. These pre-service teachers believed that effective language learning centres on active engagement in the target language community. A mismatch between the views and evaluations of the two groups – the pre-service teachers and the home-stay family members – provides some evidence of misalignments in terms of expectations and perceptions of each other’s roles and responsibilities. The study has highlighted challenges encountered, and provided suggestions for ways of meeting these challenges. The inclusion in the study of the home-stay families’ perceptions and commentaries provided insights, which can inform program development. There is clearly further work to be done in terms of predeparture orientation and preparation, not only for the main participants themselves, the students, but also for the host families.

Mentoring across the professions : some issues and challenges

Mentoring has been identified as a valuable learning activity for beginners and more experienced personnel across a range of professions. For example, education, nursing, medicine, law, accounting , and public administration are among those professions that have utilised mentoring programs as a way of socialising and developing the skills and competencies of new professionals. The definition of mentoring used in this paper comes from Hansford, Tennent, and Ehrich (2002, 2003) that describes mentoring as a process whereby a more experienced practitioner works with, supports, guides and provides professional development to a less experienced practitioner. Mentoring, then, is often used to develop novice or less experienced professionals at two important phases in their career: (i) during their initial university training; and (ii) after graduation from university. For example, within the field experience components of many university degrees in education, nursing, medicine, social work, and other human service programs, students are assigned workplace mentors who assist them in transferring important skills and knowledge learned at university into practical setting. For concentrated periods of time during their degree, pre-service teachers, pre-service nurses and medical students work in the field alongside a workplace mentor.

Spatial population genetic structure reveals strong natal site fidelity in Echinocladius martini (Diptera: Chironomidae) in northeast Queensland, Australia

1. A diverse array of patterns has been reported regarding the spatial extent of population genetic structure and effective dispersal in freshwater macroinvertebrates. In river systems, the movements of many taxa can be restricted to varying degrees by the natural stream channel hierarchy. 2. In this study, we sampled populations of the non-biting freshwater midge Echinocladius martini in the Paluma bioregion of tropical northeast Queensland to investigate fine scale patterns of within- and among-stream dispersal and gene flow within a purported historical refuge. We amplified a 639 bp fragment of mitochondrial COI and analysed genetic structure using pairwise ΦST, hierarchical AMOVA, Mantel tests and a parsimony network. Genetic variation was partitioned among stream sections using Streamtree to investigate the effect of potential instream dispersal barriers. 3. The data revealed strong natal site fidelity and significant differentiation among neighbouring, geographically proximate streams. We found evidence for only episodic adult flight among sites on separate stream reaches. Overall, however, our data suggested that both larval and adult dispersal was largely limited to within a stream channel. 4. This may arise from a combination of the high density of riparian vegetation physically restricting dispersal and from the joint effects of habitat stability and large population sizes. Together these may mitigate the requirement for movement among streams to avoid inbreeding and local extinction due to habitat change and may thus enable persistence of upstream populations in the absence of regular compensatory upstream flight. Taken together, these data suggest that dispersal of E. martini is highly restricted, to the scale of only a few kilometres, and hence occurs predominantly within the natal stream.

Coursework masters students' perspectives on career development learning

Coursework Masters’ students have been identified as a ‘forgotten’ cohort by the Queensland University of Technology (QUT) Careers and Employment (C&E) Service. Traditionally, these students have been included in undergraduate career development activities. However, coursework Masters’ students are arguably a specialised cohort due to the advanced learning implicit in many of their degrees. A brief survey was designed to better understand how to assist QUT coursework Masters students with career development activities. Students were emailed an invitation to complete a brief online survey asking for their assistance in planning appropriate career development activities for their cohort. Questions included reasons for undertaking a Masters degree and preferred topics and times for career development activities. 615 students completed the survey. This brief report will report the results of the survey and highlight suggestions for career development practitioners and services

'Being-in-the-world-of-care' : the lived experiences of older people receiving community aged care packages in Queensland

It has been recognised in current literature that, in general, Australia’s population is ageing and that older people are increasingly choosing to continue to live in the community in their own homes for as long as possible. Such factors of social change are expected to lead to larger numbers of older people requiring community care services for longer periods. Despite this, there is little information available in the literature on the perceptions and experiences of older people regarding community-based care and support. This study explores the lived experience of a small group of older people living in South East Queensland who were receiving a level of care consistent with the Community Aged Care Package (CACP). It also sought to examine the impact and meaning of that care on the older person’s overall lifestyle, autonomy, and personal satisfaction. In-depth interviews were undertaken with these older people, and were analysed using Heidegger’s interpretive hermeneutical phenomenological approach. Shared narratives were then explored using Ricoeur’s narrative analysis framework. In order to sensitise the researcher to the unconscious or symbolic aspects of the care experience, Wolfensberger’s social role valorization theory (SRV) was also utilised during a third phase of analysis. Methodological rigour was strengthened within this study through the use of reflexivity and an in-depth member check discussion that was conducted with each participant. The interviews revealed there were significant differences in expectations, understanding, and perceptions between older people and their carers or service providers. The older person perceived care primarily in relational terms, and clearly preferred active participation in their care and a consistent relationship with a primary carer. Older people also sought to maintain their sense of autonomy, lifestyle, home environment, routines, and relationships, as closely as possible to those that existed prior to their requiring assistance. However, these expectations were not always supported by the care model. On the whole, service providers did not always understand what older people perceived was important within the care context. Carers seldom looked beyond the provision of assistance with specific daily tasks to consider the real impact of care on the older person. The study identified that older people reported a range of experiences when receiving care in their own homes. While some developed healthy and supportive connections with their carers, others experienced ageism, abuse, and exploitation. Unsatisfactory interactions at times resulted in a loss, to varying degrees, of their independence, their possessions, and their connectedness with others. There is therefore a need for service providers to pay more attention to the perceptions and self-perceived needs of older people, to avoid unintended or unnecessary negative impacts occurring within care provision. The study provides valuable information regarding the older person’s experience that will assist in supporting the further development and improvement of this model of care. It is proposed that these insights will enable CACPs to cater more closely to the actual needs and preferences of older people, and to avoid causing preventable harm to care recipients.