Understanding preservice teachers’ predispositions for teaching engineering education in Australian schools.

Engineering education is underrepresented in Australia at the primary, middle school and high school levels. Understanding preservice teachers’ preparedness to be involved in engineering will be important for developing an engineering curriculum. This study administered a literature-based survey to 36 preservice teachers, which gathered data about their perceptions of engineering and their predispositions for teaching engineering. Findings indicated that the four constructs associated with the survey had acceptable Cronbach alpha scores (i.e., personal professional attributes .88, student motivation .91, pedagogical knowledge .91, and fused curricula .89). However, there was no “disagree” or “strongly disagree” response greater than 22% for any of the 25 survey items. Generally, these preservice teachers indicated predispositions for teaching engineering in the middle school. Extensive scaffolding and support with education programs will assist preservice teachers to develop confidence in this field. Governments and education departments need to recognise the importance of engineering education, and universities must take a stronger role in developing engineering education curricula.

Being and Living in an Australian Urban Community

There is a limited evidence base which highlights the plight of Australian Aboriginal and Torres Strait Islander populations living in urban areas and the issues that impact on Indigenous achievements in education, health status, housing needs, rates of incarceration and the struggle for cultural recognition. This is despite over 70 % of all Aboriginal and Torres Strait Islander people in Australia now living in urban or regional urban areas (ABS 2008). The statistics demonstrate that living in urban centres is as much part of reality for Australian Aboriginal and Torres Strait Islander people as living in a remote discrete community. Using the capital city of Brisbane, Queensland as a case study, this paper will explore some of the issues that Aboriginal and Torres Strait Islander peoples face against a backdrop of the statistics and some of the current literature. It will additionally explore why there has been limited research with Aboriginal and Torres Strait Islander populations in urban areas and highlight some of the innovative research taking place which will begin to redress this gap. The research issues presented within this paper will resonate with some of the Native American and Indigenous movement patterns and associated issues additionally occurring in the United States of America, Canada and New Zealand.

Gender and the Australian parliament : putting the political scientist into the picture

This paper draws on a study of gender and politics in the Australian parliament in order to make a contribution to methodological debates in feminist political science. The paper begins by outlining the different dimensions of feminist political science methodology that have been identified in the literature. According to this literature five key principles can be seen to constitute feminist approaches to political science. These are: a focus on gender, a deconstruction of the public/private divide, giving voice to women, using research as a basis for transformation, and using reflexivity to critique researcher positionality. The next part of the paper focuses more specifically on reflexivity tracing arguments about its definition, usefulness and the criticisms it has attracted from researchers. Following this, I explore how my background as a member of the Australian House of Representatives from 1987 to 1996 provided an important academic resource in my doctoral study of gender and politics in the national parliament. Through this process I highlight the value of a reflexive approach to research.

Discourse practice gaps in work life balance : comparative case studies in the Australian construction industry

Perspectives on work-life balance (WLB) reflected in political, media and organisational discourse, would maintain that WLB is on the agenda because of broad social, economic and political factors (Fleetwood 2007). In contrast, critical scholarship which examines work-life balance (WLB) and its associated practices maintains that workplace flexibility is more than a quasi-functionalist response to contemporary problems faced by individuals, families or organisations. For example, the literature identifies where flexible work arrangements have not lived up to expectations of a panacea for work-home conflicts, being characterised as much by employer-driven working conditions that disadvantage workers and constrain balance, as they are by employee friendly practices that enable it (Charlesworth 1997). Further, even where generous organisational work-life balance policies exist, under-utilisation is an issue (Schaefer et al, 2007). Compounding these issues is that many employees perceive their paid work as becoming more intense, pressured and demanding (Townsend et al 2003).

The information systems discipline in Australian universities : a contextual framework

This chapter presents the contextual framework for the second phase of a multi-method, multiple study of the information systems (IS) academic discipline in Australia. The chapter outlines the genesis of a two-phase Australian study, and positions the study as the precursor to a larger Pacific-Asia study. Analysis of existing literature on the state of IS and on relevant theory underpins a series of individual Australian state case studies summarised in this chapter and represented as separate chapters in the book. This chapter outlines the methodological approach employed, with emphasis on the case-study method of the multiple state studies. The process of multiple peer review of the studies is described. Importantly, this chapter summarises and analyses each of the subsequent chapters of this book, emphasising the role of a framework developed to guide much of the data gathering and analysis. This chapter also highlights the process involved in conducting the meta-analysis reported in the final chapter of this book, and summarises some of the main results of the meta-analysis.

Exploring the resistance : an Australian perspective on educating for sustainability in early childhood

Climate change and sustainability are issues of global significance. While other education sectors have implemented education for sustainability for many years, the early childhood sector has been slow to take up this challenge. This position paper poses the question: Why has this sector been so slow to engage with sustainability? Explanations are proposed based on a review of research literature and the authors’ long engagement in seeking to bring early childhood education and education for sustainability together. The imperative is for the early childhood sector to engage in education for sustainability without delay and to ‘get active’ for a sustainable future.

Measuring safety effectiveness : literature review

Cohen (1977) reviewed the then current research on occupational safety and stated that both strong company commitment to safety, and communication between all levels of a company are the most influential factors to improving safety. Other relevant factors included careful selection of staff, and early and continuous training throughout the lifetime with the company. These continue to be important factors in OHS today. There has been a continued decrease in the injury rates since Cohen’s review within the Australian construction industry, however, the construction industry has far more injuries and ill-health than the Australian average, with one fatality occurring on average per week in the Australian Construction Industry. The Fatality rate in the building and construction industry remains three times higher than the national average, and 15% of all industry fatalities are in the building and construction industry. In addition the construction industry pays one of the highest workers’ compensation premium rates – in 2001 alone approximately 0.5% ($267 million) of revenue would have to be allocated to the direct cost of 1998/99 compensations (Office of the Federal Safety Commissioner, 2006). Based on these statistics there is a need to measure and improve safety performance within the construction industry.

Engaging with the promises of education : African refugee students in Australian secondary schools

The research reported in this paper investigated the engagement of students who arrived in Australian secondary schools as refugees from Africa. Enrolment of large cohorts of refugees from Africa is a relatively new phenomenon in the English-speaking West. The literature provides evidence that emotional engagement with the promises of schooling is strong for many of the young African refugees. Students envision successful professional careers as doctors, engineers, lawyers, and IT experts; they envision returning to their country as professionals able to help the people. The question investigated in this paper is: How does schooling in Australia impact on young African refugees’ education and career aspirations? Engagement is understood in Bourdieuian terms as dispositions to be and to become an educated person. This is a disposition which entails fundamental belief in the value of the stakes of schooling. The data analysed in the paper were produced in a study undertaken in the state of Queensland where 5000 of the 39 000 African refugees who have arrived in Australia since 2000 have settled. Semi-structured interviews were conducted with students and their parents and teachers after arrival in an intensive language school, and then after transition to a regular secondary school. The findings show both the durability and malleability of educational dispositions in conditions of dramatic social change occasioned by refugee experience. Engagement in the stakes of schooling is both built and eroded as students flee their homelands for countries of refuge. Previously unimaginable educational dreams are possible for some; but for others, long-held dreams become unattainable. The paper concludes with recommendations for better supporting young people through this re-shaping of self.

Australian Association for Exercise and Sport Science position stand : optimising cancer outcomes through exercise

Cancer represents a major public health concern in Australia. Causes of cancer are multifactorial with lack of physical activity being considered one of the known risk factors, particularly for breast and colorectal cancers. Participating in exercise has also been associated with benefits during and following treatment for cancer, including improvements in psychosocial and physical outcomes, as well as better compliance with treatment regimens, reduced impact of disease symptoms and treatment-related side effects, and survival benefits for particular cancers. The general exercise prescription for people undertaking or having completed cancer treatment is of low to moderate intensity, regular frequency (3-5 times/week) for at least 20 minutes per session, involving aerobic, resistance or mixed exercise types. Future work needs to push the boundaries of this exercise prescription, so that we can better understand what constitutes optimal, desirable and necessary frequency, duration, intensity and type, and how specific characteristics of the individual (e.g., age, cancer type, treatment, presence of specific symptoms) influence this prescription. What follows is a summary of the cancer and exercise literature, in particular the purpose of exercise following diagnosis of cancer, the potential benefits derived by cancer patients and survivors from participating in exercise programs, and exercise prescription guidelines and contraindications or considerations for exercise prescription with this special population. This report represents the position stand of the Australian Association of Exercise and Sport Science on exercise and cancer recovery and has the purpose of guiding Accredited Exercise Physiologists in their work with cancer patients.

Legal Issues Relating to the Notification of Australian Data Breaches

Advances in information and communications technologies during the last two decades have allowed organisations to capture and utilise data on a vast scale, thus heightening the importance of adequate measures for protecting unauthorised disclosure of personal information. In this respect, data breach notification has emerged as an issue of increasing importance throughout the world. It has been the subject of law reform in the United States and in other international jurisdictions. Following the Australian Law Reform Commission’s review of privacy, data breach notification will soon be addressed in Australia. This article provides a review of US and Australian legal initiatives regarding the notification of data breaches. The authors highlight areas of concern based on the extant US literature that require specific consideration in Australia regarding the development of an Australian legal framework for the notification of data breaches.

The status of Australian nurse practitioners : the first national census

A five-section questionnaire was mailed to all 234 authorised Australian nurse practitioners in late 2007. An 85% response rate was achieved (202 responses). Respondents had a mean age of 47.0 years and 84.2% were women. Only 145 nurse practitioners (72% of respondents) reported being employed in Australia at the time of the census. Emergency nurse practitioners were the most commonly employed nationally (26.9%). Nearly one third of employed nurse practitioners reported that they were still awaiting approval to prescribe medications despite this being a core legislated skill. Over 70% stated that lack of Medicare provider numbers and lack of authority to prescribe through the Pharmaceut ical Benef its Scheme was extremely limiting to their practice. These findings are consistent with the international literature describing establishment of reformative

Social procurement and its implications for social enterprise : a literature review [Working Paper No. CPNS48]

This paper reviews the available academic and policy literature to identify the possibilities and limitations of social procurement, and the factors that enable its implementation. In doing so, it aims to contribute to an evidence-based approach to social enterprise development in Australia, and to provide practical information of use to both policy makers and social enterprises considering social procurement arrangements. Based on the available evidence, the dominant focus of this review is on social procurement by governments.

A comparison of international occupational therapy competencies : implications for Australian standards in the new millennium

Background/aim: A timely evaluation of the Australian Competency Standards for Entry-Level Occupational Therapists© (1994) was conducted. This thorough investigation comprised a literature review exploring the concept of competence and the applications of competency standards; systematic benchmarking of the Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) against other national and international competency standards and other affiliated documents, from occupational therapy and other cognate disciplines; and extensive nationwide consultation with the professional community. This paper explores and examines the similarities and disparities between occupational therapy competency standards documents available in English from Australia and other countries.----- Methods: An online search for national occupational therapy competency standards located 10 documents, including the Australian competencies.----- Results: Four 'frameworks' were created to categorise the documents according to their conceptual underpinnings: Technical-Prescriptive, Enabling, Educational and Meta-Cognitive. Other characteristics that appeared to impact the design, content and implementation of competency standards, including definitions of key concepts, authorship, national and cultural priorities, scope of services, intended use and review mechanisms, were revealed.----- Conclusion: The proposed 'frameworks' and identification of influential characteristics provided a 'lens' through which to understand and evaluate competency standards. While consistent application of and attention to some of these characteristics appear to consolidate and affirm the authority of competency standards, it is suggested that the national context should be a critical determinant of the design and content of the final document. The Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) are critiqued accordingly, and preliminary recommendations for revision are proposed.

Show me a bad kid and I’ll show you a lousy parent : making parents responsible for youth crime in Australian and Canadian Contexts

This article surveys literature bearing on the issue of parental liability and responsibility for the crimes of young offenders, with a particular focus on comparing different approaches to dealing with the issue in Australia and Canada. This comparative analysis of Australian and Canadian legislative and policy approaches is situated within a broader discussion of arguments about the “punitive turn” in youth justice, responsibilisation, and cross-jurisdictional criminal justice policy transfer and convergence. Our findings suggest that there are significant differences in the manner and extent to which Australia and Canada have invoked parental responsibility laws and policies as part of the solution to dealing with youth crime. We conclude by speculating on some of the reasons for these differences and establishing an agenda for additional needed cross-jurisdictional research. In particular, we argue that it would be fruitful to undertake a cross-jurisdictional study that examines the development and effects of parental responsibility laws across a larger number of different Western countries as well as across individual states and provinces within these national jurisdictions.

A study into the permeability and compressibility of Australian bagasse pulp

This is an experimental study into the permeability and compressibility properties of bagasse pulp pads. Three experimental rigs were custom-built for this project. The experimental work is complemented by modelling work. Both the steady-state and dynamic behaviour of pulp pads are evaluated in the experimental and modelling components of this project. Bagasse, the fibrous residue that remains after sugar is extracted from sugarcane, is normally burnt in Australia to generate steam and electricity for the sugar factory. A study into bagasse pulp was motivated by the possibility of making highly value-added pulp products from bagasse for the financial benefit of sugarcane millers and growers. The bagasse pulp and paper industry is a multibillion dollar industry (1). Bagasse pulp could replace eucalypt pulp which is more widely used in the local production of paper products. An opportunity exists for replacing the large quantity of mainly generic paper products imported to Australia. This includes 949,000 tonnes of generic photocopier papers (2). The use of bagasse pulp for paper manufacture is the main application area of interest for this study. Bagasse contains a large quantity of short parenchyma cells called ‘pith’. Around 30% of the shortest fibres are removed from bagasse prior to pulping. Despite the ‘depithing’ operations in conventional bagasse pulp mills, a large amount of pith remains in the pulp. Amongst Australian paper producers there is a perception that the high quantity of short fibres in bagasse pulp leads to poor filtration behaviour at the wet-end of a paper machine. Bagasse pulp’s poor filtration behaviour reduces paper production rates and consequently revenue when compared to paper production using locally made eucalypt pulp. Pulp filtration can be characterised by two interacting factors; permeability and compressibility. Surprisingly, there has previously been very little rigorous investigation into neither bagasse pulp permeability nor compressibility. Only freeness testing of bagasse pulp has been published in the open literature. As a result, this study has focussed on a detailed investigation of the filtration properties of bagasse pulp pads. As part of this investigation, this study investigated three options for improving the permeability and compressibility properties of Australian bagasse pulp pads. Two options for further pre-treating depithed bagasse prior to pulping were considered. Firstly, bagasse was fractionated based on size. Two bagasse fractions were produced, ‘coarse’ and ‘medium’ bagasse fractions. Secondly, bagasse was collected after being processed on two types of juice extraction technology, i.e. from a sugar mill and from a sugar diffuser. Finally one method of post-treating the bagasse pulp was investigated. The effects of chemical additives, which are known to improve freeness, were also assessed for their effect on pulp pad permeability and compressibility. Pre-treated Australian bagasse pulp samples were compared with several benchmark pulp samples. A sample of commonly used kraft Eucalyptus globulus pulp was obtained. A sample of depithed Argentinean bagasse, which is used for commercial paper production, was also obtained. A sample of Australian bagasse which was depithed as per typical factory operations was also produced for benchmarking purposes. The steady-state pulp pad permeability and compressibility parameters were determined experimentally using two purpose-built experimental rigs. In reality, steady-state conditions do not exist on a paper machine. The permeability changes as the sheet compresses over time. Hence, a dynamic model was developed which uses the experimentally determined steady-state permeability and compressibility parameters as inputs. The filtration model was developed with a view to designing pulp processing equipment that is suitable specifically for bagasse pulp. The predicted results of the dynamic model were compared to experimental data. The effectiveness of a polymeric and microparticle chemical additives for improving the retention of short fibres and increasing the drainage rate of a bagasse pulp slurry was determined in a third purpose-built rig; a modified Dynamic Drainage Jar (DDJ). These chemical additives were then used in the making of a pulp pad, and their effect on the steady-state and dynamic permeability and compressibility of bagasse pulp pads was determined. The most important finding from this investigation was that Australian bagasse pulp was produced with higher permeability than eucalypt pulp, despite a higher overall content of short fibres. It is thought this research outcome could enable Australian paper producers to switch from eucalypt pulp to bagasse pulp without sacrificing paper machine productivity. It is thought that two factors contributed to the high permeability of the bagasse pulp pad. Firstly, thicker cell walls of the bagasse pulp fibres resulted in high fibre stiffness. Secondly, the bagasse pulp had a large proportion of fibres longer than 1.3 mm. These attributes helped to reinforce the pulp pad matrix. The steady-state permeability and compressibility parameters for the eucalypt pulp were consistent with those found by previous workers. It was also found that Australian pulp derived from the ‘coarse’ bagasse fraction had higher steady-state permeability than the ‘medium’ fraction. However, there was no difference between bagasse pulp originating from a diffuser or a mill. The bagasse pre-treatment options investigated in this study were not found to affect the steady-state compressibility parameters of a pulp pad. The dynamic filtration model was found to give predictions that were in good agreement with experimental data for pads made from samples of pretreated bagasse pulp, provided at least some pith was removed prior to pulping. Applying vacuum to a pulp slurry in the modified DDJ dramatically reduced the drainage time. At any level of vacuum, bagasse pulp benefitted from chemical additives as quantified by reduced drainage time and increased retention of short fibres. Using the modified DDJ, it was observed that under specific conditions, a benchmark depithed bagasse pulp drained more rapidly than the ‘coarse’ bagasse pulp. In steady-state permeability and compressibility experiments, the addition of chemical additives improved the pad permeability and compressibility of a benchmark bagasse pulp with a high quantity of short fibres. Importantly, this effect was not observed for the ‘coarse’ bagasse pulp. However, dynamic filtration experiments showed that there was also a small observable improvement in filtration for the ‘medium’ bagasse pulp. The mechanism of bagasse pulp pad consolidation appears to be by fibre realignment. Chemical additives assist to lubricate the consolidation process. This study was complemented by pulp physical and chemical property testing and a microscopy study. In addition to its high pulp pad permeability, ‘coarse’ bagasse pulp often (but not always) had superior physical properties than a benchmark depithed bagasse pulp.