Methods for the illumination of multilevel buildings with vertical light pipes

This paper examines the feasibility of using vertical light pipes to naturally illuminate the central core of a multilevel building not reached by window light. The challenges addressed were finding a method to extract and distribute equal amounts of light at each level and designing collectors to improve the effectiveness of vertical light pipes in delivering low elevation sunlight to the interior. Extraction was achieved by inserting partially reflecting cones within transparent sections of the pipes at each floor level. Theory was formulated to estimate the partial reflectance necessary to provide equal light extraction at each level. Designs for daylight collectors formed from laser cut panels tilted above the light pipe were developed and the benefits and limitations of static collectors as opposed to collectors that follow the sun azimuth investigated. Performance was assessed with both basic and detailed mathematical simulation and by observations made with a five level model building under clear sky conditions.

Improving the impact of luminance contrast on the window appearance in a conventional office room: Using supplementary lighting strategies

High contrast ratios between windows and surrounding surfaces could cause reduced visibility or discomfort for occupants. Consequently, building users may choose to intervene in lighting conditions through closing blinds and turning on the lamps in order to enhance indoor visual comfort. Such interventions increase projected electric lighting use in buildings. One simple method to prevent these problematic issues is increasing the luminance of the areas surrounding to the bright surface of windows through the use of energy-efficient supplementary lighting, such Light Emitting Diodes (LEDs). This paper reports on the results of a pilot study in conventional office in Brisbane, Australia. The outcomes of this study indicated that a supplementary LED system of approximately 18 W could reduce the luminance contrast on the window wall from values in the order of 117:1 to 33:1. In addition, the results of this experiment suggested that this supplementary strategy could increase the subjective scale appraisal of window appearance by approximately 33%, as well as reducing the likelihood of users’ intention to turn on the ceiling lights by about 27%. It could also diminish the likelihood of occupants’ intention to move the blind down by more than 90%.

Positive development and assessment

Purpose – There has been a tendency in sustainability science to be passive. The purpose of this paper is to introduce an alternative positive framework for a more active and direct approach to sustainable design and assessment that de-couples environmental impacts and economic growth. Design/methodology/approach – This paper deconstructs some systemic gaps that are critical to sustainability in built environment management processes and tools, and reframes negative “sustainable” decision making and assessment frameworks into their positive counterparts. In particular, it addresses the omission of ecology, design and ethics in development assessment. Findings – Development can be designed to provide ecological gains and surplus “eco-services,” but assessment tools and processes favor business-as-usual. Despite the tenacity of the dominant paradigm (DP) in sustainable development institutionalized by the Brundtland Report over 25 years ago, these omissions are easily corrected. Research limitations/implications – The limitation is that the author was unable to find exceptions to the omissions cited here in the extensive literature on urban planning and building assessment tools. However, exceptions prove the rule. The implication is that it is not too late for eco-positive retrofitting of cities to increase natural and social capital. The solutions are just as applicable in places like China and India as the USA, as they pay for themselves. Originality/value – Positive development (PD) is a fundamental paradigm shift that reverses the negative models, methods and metrics of the DP of sustainable development. This paper provides an example of how existing “negative” concepts and practices can be converted into positive ones through a PD prism. Through a new form of bio-physical design, development can be a sustainability solution.

Rethinking Culture and Diversity in Early Childhood Preservice Teacher Education: Looking at Teaching and Learning Through an Interdisciplinary Lens

Early Childhood Education (ECE) has a long history of building foundations for children to achieve their full potential, enabling parents to participate in the economy while children are cared for, addressing poverty and disadvantage, and building individual, community and societal resources. In so doing, ECE has developed a set of cultural practices and ways of knowing that shape the field and the people who work within it. ECE, consequently, is frequently described as unique and special (Moss, 2006; Penn, 2011). This works to define and distinguish the field while, simultaneously, insulating it from other contexts, professions, and ideas. Recognising this dualism illuminates some of the risks and challenges of operating in an insular and isolated fashion. In the 21st century, there are new challenges for children, families and societies to which ECE must respond if it is to continue to be relevant. One major issue is how ECE contributes to transition towards more sustainable ways of living. Addressing this contemporary social problem is one from which Early Childhood teacher education has been largely absent (Davis & Elliott, 2014), despite the well recognised but often ignored role of education in contributing to sustainability. Because of its complexity, sustainability is sometimes referred to as a ‘wicked problem’ (Rittel & Webber, 1973; Australian Public Service Commission, 2007) requiring alternatives to ‘business as usual’ problem solving approaches. In this chapter, we propose that addressing such problems alongside disciplines other than Education enables the Early Childhood profession to have its eyes opened to new ways of thinking about our work, potentially liberating us from the limitations of our “unique” and idiosyncratic professional cultures. In our chapter, we focus on understandings of culture and diversity, looking to broaden these by exploring the different ‘cultures’ of the specialist fields of ECE and Design (in this project, we worked with students studying Architecture, Industrial Design, Landscape Architecture and Interior Design). We define culture not as it is typically represented, i.e. in relation to ideas and customs of particular ethnic and language groups, but to the ideas and practices of people working in different disciplines and professions. We assert that different specialisms have their own ‘cultural’ practices. Further, we propose that this kind of theoretical work helps us to reconsider ways in which ECE might be reframed and broadened to meet new challenges such as sustainability and as yet unknown future challenges and possibilities. We explore these matters by turning to preservice Early Childhood teacher education (in Australia) as a context in which traditional views of culture and diversity might be reconstructed. We are looking to push our specialist knowledge boundaries and to extend both preservice teachers and academics beyond their comfort zones by engaging in innovative interdisciplinary learning and teaching. We describe a case study of preservice Early Childhood teachers and designers working in collaborative teams, intersecting with a ‘real-world’ business partner. The joint learning task was the design of an early learning centre based on sustainable design principles and in which early Education for Sustainability (EfS) would be embedded Data were collected via focus group and individual interviews with students in ECE and Design. Our findings suggest that interdisciplinary teaching and learning holds considerable potential in dismantling taken-for-granted cultural practices, such that professional roles and identities might be reimagined and reconfigured. We conclude the chapter with provocations challenging the ways in which culture and diversity in the field of ECE might be reconsidered within teacher education.

Investigation of the effect of balconies on natural ventilation of dwellings in high-rise residential buildings in subtropical climate

Balconies, as one of the main architectural features in subtropical climates, are assumed to enhance the ventilation performance of buildings by redirecting the wind. Although there are some studies on the effect of balconies on natural ventilation inside buildings, the majority have been conducted on single zone buildings with simple geometries. The purpose of this study is to explore the effect of balconies on the internal air flow pattern and ventilation performance of multi-storey residential buildings with internal partitions. To this end, a sample residential unit was selected for investigation and three different conditions tested, base case (no balcony), an open balcony and a semi-enclosed balcony. Computational Fluid Dynamics is used as an analysis method due to its accuracy and ability to provide detailed results. The cases are analysed in terms of average velocity, flow uniformity and number of Air Changes per Hour (ACH). The results suggest the introduction of a semi-enclosed balcony into high-rise dwellings improves the average velocity and flow uniformity. Integrating an open balcony results in reduction of the aforementioned parameters at 0° wind incidence.

Affective sensing + wearable imaging: Vision impairment and implications for spatial enquiry

Recent interest in affect and the body have mobilized a contemporary review of aesthetics and phenomenology within architecture to unpack how environments affect spatial experience. Emerging spatial studies within the neuro-sciences, and their implications for architectural research as raised by architectural theorists Juhani Pallasmaa (2014) and Harry Mallgrave (2013) has been well supported by a raft of scientists and institutions including the prestigious Salk Institute. Although there has been some headway in spatial studies of the vision impaired (Cattaneo et al, 2011) to understand the role of their non-visual systems in assisting navigation and location, little is discussed in terms of their other abilities in sensing particular qualities of space which impinge upon emotion. This paper reviews a collection of studies exploring face vision and echo-location, amongst others, which provide insight into what might be termed affective perception of the vision impaired, and how further interplay between this research and the architectural field can contribute new knowledge regarding space and affect. By engaging with themes from the Aesthetics, Phenomenology and indeed Neuro-science fields, the paper provides background of current and potential cross disciplinary research, and highlights the role wearable technologies can play in enhancing knowledge of affective spatial experience.

Embedding sustainability in a real-world context: Developing a world class early learning centre

This symposium describes what is possible when early childhood professionals work with designers to develop a vision for an exemplary early childhood centre with a focus on Education for Sustainability (EfS). The symposium provides insights into cross-disciplinary initiatives between QUT Early childhood and Design staff and students, who have worked together with the iconic Lone Pine Koala Sanctuary in Brisbane, to explore imperatives around EfS, including leadership and professionalism. This practical, real world project has seen all stakeholders engage in a focus on sustainability which has opened new ways of thinking about early childhood centre design. Cross-disciplinarity has created space to re-think the potential of the disciplines to interweave, and in so doing opened different ways for thinking about early childhood centres – their operation and their function. For the first time in Queensland, this project creates strategic alliances between EfS, childcare, business and sustainable design. EfS is essential for addressing local and global environmental issues and early childhood EfS research has been gaining international momentum, with governments nominating this area as having significant capacity to empower communities and promote change. While models for collaboration exist in the early childhood programs in Reggio Emilia, we offer sustainability as a unique and contemporary focus with immense potential to generate international and national interest. To date Early Childhood degree students enrolled in a leadership and management unit/subject have worked collaboratively with Design students to explore the sustainable design of the proposed Lone Pine early childhood centre. Providing students with a ‘real world’ project sees them re-positioned from ‘novice’ to ‘professional’, where their knowledge, expertise and perspectives are simultaneously validated and challenged. These learning experiences are enabling students to practice a new model of early childhood leadership, one that is vital for leading in an increasingly complex world. The symposium will be comprised of three discrete, though interconnected presentations, that work together to tell the story of this project. Three key facets of the project will be explored during the 90 minute session, as the perspectives of key stakeholders are shared. The first presentation (A/Prof Julie Davis, Dr Lyndal O’Gorman& Dr Megan Gibson) will outline the role of QUT School of Early Childhood staff and students, with attention to the ways in which the project was embedded in students’ work in the final year of their degree program of study. The second presentation (Ms Lindy Osborne) will provide insights into the Design students’ collaborative work in the project. Finally, the key role of the Lone Pine Koala Sanctuary and their commitment for EfS (Ms Peta Wilson & Dr Sue Elliott) will map out the philosophy that underpins the project. Together, the authors will conclude key project outcomes that have been achieved through this real-world, cross-disciplinary work.

Transfunctional living walls-designing living walls for environmental and social benefits

Greater attention is being directed towards incorporating greenery into the built environment as increasing global urbanisation drives the search for sustainable urbanism. This research takes a parametric approach to studying living wall dynamics using three methods to cover a diversity of design parameters and performance criteria. The findings led to a functional typology for living walls based on a range of design, context and performance parameters wider than previously identified. Such parametric studies offer valuable insights into 'transfunctional' living walls for homes, schools and public spaces.

Reducing luminance contrast on the window wall and users’ interventions in an office room

High luminance contrast between windows and surrounding surfaces could cause discomfort glare, which could reduce office workers’ productivity. It might also increase energy usage of buildings due to occupants’ interventions in lighting conditions to improve indoor visual quality. It is presumed that increasing the luminance of the areas surrounding the windows using a supplementary system, such Light Emitting Diodes (LEDs), could reduce discomfort glare. This paper reports on the results of a pilot study in a conventional office in Brisbane, Australia. The outcomes of this study indicated that a supplementary LED system could reduce the luminance contrast on the window wall from values in the order of 24:1 to 12:1. The results suggest that this reduction could significantly reduce discomfort glare from windows, as well as diminishing the likelihood of users’ intention to turn on the ceiling lights and/ or to move the blind down.

Decreasing luminance contrast on window walls as well as users’ interventions: Using LED lighting system

Mr Mehdi Amirkhani presented his research and case studies on improved lighting design in commercial spaces through daylight control and innovative lighting placement. This technical meeting was organised by IESANZ Queensland Chapter on April 7, 2016.

Modelling sustainable and optimal solutions for building services integration in early architectural design : confronting the software and professional interoperability deficit

Decisions made in the earliest stage of architectural design have the greatest impact on the construction, lifecycle cost and environmental footprint of buildings. Yet the building services, one of the largest contributors to cost, complexity, and environmental impact, are rarely considered as an influence on the design at this crucial stage. In order for efficient and environmentally sensitive built environment outcomes to be achieved, a closer collaboration between architects and services engineers is required at the outset of projects. However, in practice, there are a variety of obstacles impeding this transition towards an integrated design approach. This paper firstly presents a critical review of the existing barriers to multidisciplinary design. It then examines current examples of best practice in the building industry to highlight the collaborative strategies being employed and their benefits to the design process. Finally, it discusses a case study project to identify directions for further research.

Rating for sustainable subdivision neighbourhood design (RSSND) : case of Bangkok metropolitan region (BMR), Thailand an eco-efficiency modelling approach

Bangkok Metropolitan Region (BMR) is the centre for various major activities in Thailand including political, industry, agriculture, and commerce. Consequently, the BMR is the highest and most densely populated area in Thailand. Thus, the demand for houses in the BMR is also the largest, especially in subdivision developments. For these reasons, the subdivision development in the BMR has increased substantially in the past 20 years and generated large numbers of subdivision developments (AREA, 2009; Kridakorn Na Ayutthaya & Tochaiwat, 2010). However, this dramatic growth of subdivision development has caused several problems including unsustainable development, especially for subdivision neighbourhoods, in the BMR. There have been rating tools that encourage the sustainability of neighbourhood design in subdivision development, but they still have practical problems. Such rating tools do not cover the scale of the development entirely; and they concentrate more on the social and environmental conservation aspects, which have not been totally accepted by the developers (Boonprakub, 2011; Tongcumpou & Harvey, 1994). These factors strongly confirm the need for an appropriate rating tool for sustainable subdivision neighbourhood design in the BMR. To improve level of acceptance from all stakeholders in subdivision developments industry, the new rating tool should be developed based on an approach that unites the social, environmental, and economic approaches, such as eco-efficiency principle. Eco-efficiency is the sustainability indicator introduced by the World Business Council for Sustainable Development (WBCSD) since 1992. The eco-efficiency is defined as the ratio of the product or service value according to its environmental impact (Lehni & Pepper, 2000; Sorvari et al., 2009). Eco-efficiency indicator is concerned to the business, while simultaneously, is concerned with to social and the environment impact. This study aims to develop a new rating tool named "Rating for sustainable subdivision neighbourhood design (RSSND)". The RSSND methodology is developed by a combination of literature reviews, field surveys, the eco-efficiency model development, trial-and-error technique, and the tool validation process. All required data has been collected by the field surveys from July to November 2010. The ecoefficiency model is a combination of three different mathematical models; the neighbourhood property price (NPP) model, the neighbourhood development cost (NDC) model, and the neighbourhood occupancy cost (NOC) model which are attributable to the neighbourhood subdivision design. The NPP model is formulated by hedonic price model approach, while the NDC model and NOC model are formulated by the multiple regression analysis approach. The trial-and-error technique is adopted for simplifying the complex mathematic eco-efficiency model to a user-friendly rating tool format. Credibility of the RSSND has been validated by using both rated and non-rated of eight subdivisions. It is expected to meet the requirements of all stakeholders which support the social activities of the residents, maintain the environmental condition of the development and surrounding areas, and meet the economic requirements of the developers.

Life cycle modelling and design knowledge development in 3D virtual environments : final report

Experience plays an important role in building management. “How often will this asset need repair?” or “How much time is this repair going to take?” are types of questions that project and facility managers face daily in planning activities. Failure or success in developing good schedules, budgets and other project management tasks depend on the project manager's ability to obtain reliable information to be able to answer these types of questions. Young practitioners tend to rely on information that is based on regional averages and provided by publishing companies. This is in contrast to experienced project managers who tend to rely heavily on personal experience. Another aspect of building management is that many practitioners are seeking to improve available scheduling algorithms, estimating spreadsheets and other project management tools. Such “micro-scale” levels of research are important in providing the required tools for the project manager's tasks. However, even with such tools, low quality input information will produce inaccurate schedules and budgets as output. Thus, it is also important to have a broad approach to research at a more “macro-scale.” Recent trends show that the Architectural, Engineering, Construction (AEC) industry is experiencing explosive growth in its capabilities to generate and collect data. There is a great deal of valuable knowledge that can be obtained from the appropriate use of this data and therefore the need has arisen to analyse this increasing amount of available data. Data Mining can be applied as a powerful tool to extract relevant and useful information from this sea of data. Knowledge Discovery in Databases (KDD) and Data Mining (DM) are tools that allow identification of valid, useful, and previously unknown patterns so large amounts of project data may be analysed. These technologies combine techniques from machine learning, artificial intelligence, pattern recognition, statistics, databases, and visualization to automatically extract concepts, interrelationships, and patterns of interest from large databases. The project involves the development of a prototype tool to support facility managers, building owners and designers. This final report presents the AIMMTM prototype system and documents how and what data mining techniques can be applied, the results of their application and the benefits gained from the system. The AIMMTM system is capable of searching for useful patterns of knowledge and correlations within the existing building maintenance data to support decision making about future maintenance operations. The application of the AIMMTM prototype system on building models and their maintenance data (supplied by industry partners) utilises various data mining algorithms and the maintenance data is analysed using interactive visual tools. The application of the AIMMTM prototype system to help in improving maintenance management and building life cycle includes: (i) data preparation and cleaning, (ii) integrating meaningful domain attributes, (iii) performing extensive data mining experiments in which visual analysis (using stacked histograms), classification and clustering techniques, associative rule mining algorithm such as “Apriori” and (iv) filtering and refining data mining results, including the potential implications of these results for improving maintenance management. Maintenance data of a variety of asset types were selected for demonstration with the aim of discovering meaningful patterns to assist facility managers in strategic planning and provide a knowledge base to help shape future requirements and design briefing. Utilising the prototype system developed here, positive and interesting results regarding patterns and structures of data have been obtained.

Life Cycle Modelling and Design Knowledge Development in 3D Virtual Environments

Experience plays an important role in building management. “How often will this asset need repair?” or “How much time is this repair going to take?” are types of questions that project and facility managers face daily in planning activities. Failure or success in developing good schedules, budgets and other project management tasks depend on the project manager's ability to obtain reliable information to be able to answer these types of questions. Young practitioners tend to rely on information that is based on regional averages and provided by publishing companies. This is in contrast to experienced project managers who tend to rely heavily on personal experience. Another aspect of building management is that many practitioners are seeking to improve available scheduling algorithms, estimating spreadsheets and other project management tools. Such “micro-scale” levels of research are important in providing the required tools for the project manager's tasks. However, even with such tools, low quality input information will produce inaccurate schedules and budgets as output. Thus, it is also important to have a broad approach to research at a more “macro-scale.” Recent trends show that the Architectural, Engineering, Construction (AEC) industry is experiencing explosive growth in its capabilities to generate and collect data. There is a great deal of valuable knowledge that can be obtained from the appropriate use of this data and therefore the need has arisen to analyse this increasing amount of available data. Data Mining can be applied as a powerful tool to extract relevant and useful information from this sea of data. Knowledge Discovery in Databases (KDD) and Data Mining (DM) are tools that allow identification of valid, useful, and previously unknown patterns so large amounts of project data may be analysed. These technologies combine techniques from machine learning, artificial intelligence, pattern recognition, statistics, databases, and visualization to automatically extract concepts, interrelationships, and patterns of interest from large databases. The project involves the development of a prototype tool to support facility managers, building owners and designers. This Industry focused report presents the AIMMTM prototype system and documents how and what data mining techniques can be applied, the results of their application and the benefits gained from the system. The AIMMTM system is capable of searching for useful patterns of knowledge and correlations within the existing building maintenance data to support decision making about future maintenance operations. The application of the AIMMTM prototype system on building models and their maintenance data (supplied by industry partners) utilises various data mining algorithms and the maintenance data is analysed using interactive visual tools. The application of the AIMMTM prototype system to help in improving maintenance management and building life cycle includes: (i) data preparation and cleaning, (ii) integrating meaningful domain attributes, (iii) performing extensive data mining experiments in which visual analysis (using stacked histograms), classification and clustering techniques, associative rule mining algorithm such as “Apriori” and (iv) filtering and refining data mining results, including the potential implications of these results for improving maintenance management. Maintenance data of a variety of asset types were selected for demonstration with the aim of discovering meaningful patterns to assist facility managers in strategic planning and provide a knowledge base to help shape future requirements and design briefing. Utilising the prototype system developed here, positive and interesting results regarding patterns and structures of data have been obtained.

Co-adaptive environments : investigation into computer and network enhanced adaptable, sustainable and participatory environments

This paper presents research in response to environmental concerns we face today. In a search for a better method to manage spaces and building resources consumed excessively through traditional top-down architectural solutions, the research began by speculating that the building spaces and resources can be managed by designing architectural systems that encourage a bottom-up approach. In other words, this research investigates how to design systems that encourage occupants and users of buildings to actively understand, manage and customise their own spaces. Specific attention is paid to the participation of building users because no matter how sophisticated the system is, the building will become as wasteful as conventional buildings if users cannot, or do not want to, utilise the system effectively. The research is still in its early stages. The intension of this paper is to provide a background to the issue, discuss researches and projects relevant to, but not necessarily about, architecture, and introduce a number of hypothesis and investigations to realise adaptable, participatory and sustainable environments for users.