Xiamen Hai Cang tourism project : landscape planning and design of five islands

International practice-led design research in landscape architecture has identified the need for addressing the loss of biodiversity in urban environments. China has lost much of its biodiversity in rural and urban environments over thousands of years. However some Chinese cities have attempted to conserve what remains and enhance existing vegetation communities in isolated pockets. Island biogeography has been used as the basis for planning and designing landscapes in Australia and North America but not as yet in China, as far as we know. A gap in landscape design knowledge exists regarding how to apply landscape ecology concepts to urban islands of remaining biodiversity being developed for heavy Chinese domestic tourism impacts in the future. This project responded to the demands for harbour-side tourism opportunities in Xiamen City, Fujian Province, by proposing a range of eco-design innovations using concepts of patch, edge and interior to interconnect people and nature in a Chinese setting.

Stage 1 of the Yueyang Urban Water System Project: Landscape planning and design of Wangjia River

Chinese landscape architects are largely focused on objective practical solutions to environmental problems. In the West, theoretical landscape knowledge is largely conceptual and abstract. This research debated how Australian ecological concepts could or should be transposed to Chinese landscapes. This project responded to severe water and soil pollution issues in the estuarine and riparian zones of rivers flowing into Dongting Lake, in Yueyang City, Hunan Province. This work proposed a range of waterfront design innovations that challenged the notion of corridor as habitat, filter, barrier and conduit in a Chinese riparian context.

Adaptive modelling of sustainable architecture design in entropy evolutionary

This paper argues a model of adaptive design for sustainable architecture within a framework of entropy evolution. The spectrum of sustainable architecture consists of efficient use of energy and material resource in the life-cycle of buildings, active involvement of the occupants into micro-climate control within the building, and the natural environment as the physical context. The interactions amongst all the parameters compose a complex system of sustainable architecture design, of which the conventional linear and fragmented design technologies are insufficient to indicate holistic and ongoing environmental performance. The latest interpretation of the Second Law of Thermodynamics states a microscopic formulation of an entropy evolution of complex open systems. It provides a design framework for an adaptive system evolves for the optimization in open systems, this adaptive system evolves for the optimization of building environmental performance. The paper concludes that adaptive modelling in entropy evolution is a design alternative for sustainable architecture.

Design Led Innovation : exploring the synthesis of needs, technologies and business models

The term Design is used to describe a wide range of activities. Like the term innovation, it is often used to describe both an activity and an outcome. Many products and services are often described as being designed, as they describe a conscious process of linking form and function. Alternatively, the many and varied processes of design are often used to describe a cost centre of an organisation to demonstrate a particular competency. However design is often not used to describe the ‘value’ it provides to an organisation and more importantly the ‘value’ it provides to both existing and future customers. Design Led Innovation bridges this gap. Design Led Innovation is a process of creating a sustainable competitive advantage, by radically changing the customer value proposition. A conceptual model has been developed to assist organisations apply and embed design in a company’s vision, strategy, culture, leadership and development processes.

Design of a model-generated repository as a service for USDL

SAP and its research partners have been developing a lan- guage for describing details of Services from various view- points called the Unified Service Description Language (USDL). At the time of writing, version 3.0 describes technical implementation aspects of services, as well as stakeholders, pricing, lifecycle, and availability. Work is also underway to address other business and legal aspects of services. This language is designed to be used in service portfolio management, with a repository of service descriptions being available to various stakeholders in an organisation to allow for service prioritisation, development, deployment and lifecycle management. The structure of the USDL metadata is specified using an object-oriented metamodel that conforms to UML, MOF and EMF Ecore. As such it is amenable to code gener-ation for implementations of repositories that store service description instances. Although Web services toolkits can be used to make these programming language objects available as a set of Web services, the practicalities of writing dis- tributed clients against over one hundred class definitions, containing several hundred attributes, will make for very large WSDL interfaces and highly inefficient “chatty” implementations. This paper gives the high-level design for a completely model-generated repository for any version of USDL (or any other data-only metamodel), which uses the Eclipse Modelling Framework’s Java code generation, along with several open source plugins to create a robust, transactional repository running in a Java application with a relational datastore. However, the repository exposes a generated WSDL interface at a coarse granularity, suitable for distributed client code and user-interface creation. It uses heuristics to drive code generation to bridge between the Web service and EMF granularities.

Ways of telling : tacit knowledge transfer for fashion design research

The knowledge and skills of fashion and textiles design have traditionally been transferred through the indenture of an apprentice to a master. This relationship relied heavily on the transfer of explicit methods of design and making but also on the transfer of tacit knowledge, explained by Michael Polanyi as knowledge that cannot be explicitly known. By watching the master and emulating his efforts in the presence of his example, the apprentice unconsciously picks up the rules of the art, including those which are not explicitly known to the master himself (Polanyi, 1962 p.53). However, it has been almost half a century since Michael Polanyi defined the tacit dimension as a state in which “we can know more than we can tell” (Polanyi, 1967 p.4) at a time when the accepted means of ‘telling’ was through academic writing and publishing in hardcopy format. The idea that tacit knowledge transfer involves a one to one relationship between apprentice and master would appear to have dire consequences for a discipline, such as fashion design, where there is no such tradition of academic writing. This paper counters this point of view by providing examples of strategies currently being employed in online environments (principally through ‘craft’) and explains how these methods might prove useful to support tacit knowledge transfer in respect to academic research within the field of fashion design, and in the wider academic community involved in creative practice research. A summary of the implications of these new ideas for contemporary fashion research will conclude the paper.

Dryness : the aesthetic condition of landscape design in Australia

Despite having a band of greenness around the edge, Australia is fundamentally a dry country. Australian vegetation has developed a high range of mechanisms to cope with the dryness, but after 200 years of white settlement, Australians still have not really come to terms with the real dryness of their country, and still exploit European paradigms that attempted to transplant European aesthetic conditions, greenness, to the brown land of Australia. Australia is going through serious water shortages that are still and will continue with the Greenhouse effect, to become a major factor in the location and extent of urbanisation, and also Australia's carrying capacity. While such aesthetic concerns might seem ornamental, until the population changes its attitude to the real condition of the country, it will keep using water and operating unsustainably. The design of the public landscape, however, offers the opportunity to contribute to changing people's aesthetic perception of the country, which might in turn help to redirect their water use practices. This essay develops a language for discussion dryness based around the experiences of water. After having developed this sensibility it then discusses a range of different approaches that landscape design in Australia has used to try to develop geographically appropriate design languages, including the Bush Garden and the Mediterranean Garden. It then discusses four design projects, one from the 1970's, the other three from the last five years that demonstrate what such an aesthetic might look like.

Shear strength and design of LiteSteel beams

This paper presents the details of a parametric study based on finite element analyses (FEA) and development of design rules for the shear strength of a recently developed, cold-formed steel channel beam known as LiteSteel Beam (LSB). The LSB sections are commonly used as flexural members in residential, in-dustrial and commercial buildings. In order to ensure safe and efficient designs of LSBs, many research stu-dies have been undertaken on the flexural behaviour of LSBs. However, no research has been undertaken on the shear behaviour of LSBs. Therefore a detailed investigation including both numerical and experimental studies was undertaken to investigate the shear behaviour of LSBs. Both the experimental and FEA parametric study results showed that the current design rules in cold-formed steel design codes are very conservative for the shear design of LSBs. New shear strength equations for LSBs were proposed based on the experimental and FEA parametric study results.

The effects of ambulance ramping on Emergency Department length of stay and mortality

Background: Ambulance ramping within the Emergency Department (ED) is a common problem both internationally and in Australia. Previous research has focused on various issues associated with ambulance ramping such as access block, ED overcrowding and ambulance bypass. However, limited research has been conducted on ambulance ramping and its effects on patient outcomes. ----- ----- Methods: A case-control design was used to describe, compare and predict patient outcomes of 619 ramped (cases) vs. 1238 non-ramped (control) patients arriving to one ED via ambulance from 1 June 2007 to 31 August 2007. Cases and controls were matched (on a 1:2 basis) on age, gender and presenting problem. Outcome measures included ED length of stay and in-hospital mortality. ----- ----- Results: The median ramp time for all 1857 patients was 11 (IQR 6—21) min. Compared to nonramped patients, ramped patients had significantly longer wait time to be triaged (10 min vs. 4 min). Ramped patients also comprised significantly higher proportions of those access blocked (43% vs. 34%). No significant difference in the proportion of in-hospital deaths was identified (2%vs. 3%). Multivariate analysis revealed that the likelihood of having an ED length of stay greater than eight hours was 34% higher among patients who were ramped (OR 1.34, 95% CI 1.06—1.70, p = 0.014). In relation to in-hospital mortality age was the only significant independent predictor of mortality (p < 0.0001). ----- ----- Conclusion: Ambulance ramping is one factor that contributes to prolonged ED length of stay and adds additional strain on ED service provision. The potential for adverse patient outcomes that may occur as a result of ramping warrants close attention by health care service providers.

Microscopic modelling of freeway operations

Freeways are divided roadways designed to facilitate the uninterrupted movement of motor vehicles. However, many freeways now experience demand flows in excess of capacity, leading to recurrent congestion. The Highway Capacity Manual (TRB, 1994) uses empirical macroscopic relationships between speed, flow and density to quantify freeway operations and performance. Capacity may be predicted as the maximum uncongested flow achievable. Although they are effective tools for design and analysis, macroscopic models lack an understanding of the nature of processes taking place in the system. Szwed and Smith (1972, 1974) and Makigami and Matsuo (1990) have shown that microscopic modelling is also applicable to freeway operations. Such models facilitate an understanding of the processes whilst providing for the assessment of performance, through measures of capacity and delay. However, these models are limited to only a few circumstances. The aim of this study was to produce more comprehensive and practical microscopic models. These models were required to accurately portray the mechanisms of freeway operations at the specific locations under consideration. The models needed to be able to be calibrated using data acquired at these locations. The output of the models needed to be able to be validated with data acquired at these sites. Therefore, the outputs should be truly descriptive of the performance of the facility. A theoretical basis needed to underlie the form of these models, rather than empiricism, which is the case for the macroscopic models currently used. And the models needed to be adaptable to variable operating conditions, so that they may be applied, where possible, to other similar systems and facilities. It was not possible to produce a stand-alone model which is applicable to all facilities and locations, in this single study, however the scene has been set for the application of the models to a much broader range of operating conditions. Opportunities for further development of the models were identified, and procedures provided for the calibration and validation of the models to a wide range of conditions. The models developed, do however, have limitations in their applicability. Only uncongested operations were studied and represented. Driver behaviour in Brisbane was applied to the models. Different mechanisms are likely in other locations due to variability in road rules and driving cultures. Not all manoeuvres evident were modelled. Some unusual manoeuvres were considered unwarranted to model. However the models developed contain the principal processes of freeway operations, merging and lane changing. Gap acceptance theory was applied to these critical operations to assess freeway performance. Gap acceptance theory was found to be applicable to merging, however the major stream, the kerb lane traffic, exercises only a limited priority over the minor stream, the on-ramp traffic. Theory was established to account for this activity. Kerb lane drivers were also found to change to the median lane where possible, to assist coincident mergers. The net limited priority model accounts for this by predicting a reduced major stream flow rate, which excludes lane changers. Cowan's M3 model as calibrated for both streams. On-ramp and total upstream flow are required as input. Relationships between proportion of headways greater than 1 s and flow differed for on-ramps where traffic leaves signalised intersections and unsignalised intersections. Constant departure onramp metering was also modelled. Minimum follow-on times of 1 to 1.2 s were calibrated. Critical gaps were shown to lie between the minimum follow-on time, and the sum of the minimum follow-on time and the 1 s minimum headway. Limited priority capacity and other boundary relationships were established by Troutbeck (1995). The minimum average minor stream delay and corresponding proportion of drivers delayed were quantified theoretically in this study. A simulation model was constructed to predict intermediate minor and major stream delays across all minor and major stream flows. Pseudo-empirical relationships were established to predict average delays. Major stream average delays are limited to 0.5 s, insignificant compared with minor stream delay, which reach infinity at capacity. Minor stream delays were shown to be less when unsignalised intersections are located upstream of on-ramps than signalised intersections, and less still when ramp metering is installed. Smaller delays correspond to improved merge area performance. A more tangible performance measure, the distribution of distances required to merge, was established by including design speeds. This distribution can be measured to validate the model. Merging probabilities can be predicted for given taper lengths, a most useful performance measure. This model was also shown to be applicable to lane changing. Tolerable limits to merging probabilities require calibration. From these, practical capacities can be estimated. Further calibration is required of traffic inputs, critical gap and minimum follow-on time, for both merging and lane changing. A general relationship to predict proportion of drivers delayed requires development. These models can then be used to complement existing macroscopic models to assess performance, and provide further insight into the nature of operations.

Designing disruption : linking participatory design and design thinking in technology orientated industries

A vast proportion of companies nowadays are looking to design and are focusing on the end users as a means of driving new projects. However still many companies are drawn to technological improvements which drive innovation within their industry context. The Australian livestock industry is no different. To date the adoption of new products and services within the livestock industry has been documented as being quite slow. This paper investigates how disruptive innovation should be a priority for these technologically focused companies and demonstrates how the use of design led innovation can bring about a higher quality engagement between end user and company alike. A case study linking participatory design and design thinking is presented. Within this, a conceptual model of presenting future scenarios to internal and external stakeholders is applied to the livestock industry; assisting companies to apply strategy, culture and advancement in meaningful product offerings to consumers.

Teaching design led innovation : the future of industrial design

The profession of industrial design is changing and with that so must industrial design education. The newly derived final year industrial design unit at the Queensland University of Technology (QUT) was created to initiate such a change. A designers’ role in industry is no longer limited to the invention process surrounding human cantered design but has now evolved into design led innovation. This paper reflects upon the teaching methods employed over a two-year period and improvements made over that time to the unit. The student project outcome is to produce a design solution that integrates an underlying novel technology into a new product and or service, with business strategies and manufacturing details being fully integrated into the design process. It is this integrated approach to industrial design teaching that will foster a more grounded and resourceful future designer.

Dangers of the after-dark wonderlands : Part A - A review of the impact of physical environment design on nightclub violence

Nightclubs are businesses. Their business is pleasure; however pleasure has its price. People have become increasingly concerned about the problems of violence in society but why do higher levels of violence occur in nightclubs despite the established patterns of behaviour that dictates how we socialise and act? In response, researchers have focused on identifying social and situational factors that may contribute to violence from a government perspective, focusing on a variety of specific issues ranging from financial standpoints with effective target marketing strategies to legal obligations of supplying alcohol and abiding regulatory conditions. There is little research into specific design properties that can determine design standards to ensure/improve the physical design of nightclub environments to reduce patron violence. To address this gap, this current article aims to understand how people experience and respond to the physical environment of nightclubs and how these spaces influence their behaviour. The first section of this paper examines the background on nightclubs and theories concerning the influence of pleasure. The second section of this paper details the findings of existing studies that have examined the nightlife context and the various factors that influence patron violence. The main finding of this paper is that although alcohol likely plays a contributing role in aggressive patron behaviour, there is evidence that the relationship is moderated by a number of significant factors relating to the characteristics of the drinking environment such as: physical comfort; the degree of overall 'permissiveness‘ in the establishment; crowding; and physical environmental elements most influenced by day to-day management practices such as lighting, ventilation, cleanliness and seating arrangements. The findings from this paper have been used to develop a framework to guide exploratory research on how specific elements of the physical environment of nightclubs have an impact on elevated patron aggression and assault (Koleczko & Garcia Hansen, 2011).

Dangers of the after-dark wonderlands : Part B - A review of the impact of the physical environment design on nightclub violence

Violence in nightclubs is a serious problem that has the Australian government launching multimillion dollar drinking campaigns. Research on nightclub violence has focused on identifying contributing social and environmental factors, with many concentrating on a variety of specific issues ranging from financial standpoints with effective target marketing strategies to legal obligations of supplying alcohol and abiding regulatory conditions. Moreover, existing research suggests that there is no single factor that directly affects the rate violence in licensed venues. As detailed in the review paper of Koleczko and Garcia Hansen (2011), there is little research about the physical environment of nightclubs and which specific design properties can be used to determine design standards to ensure/improve the physical design of nightclub environments to reduce patron violence. This current study seeks to address this omission by reporting on a series of interviews with participants from management and design domains. Featured case studies are both located in Fortitude Valley, a Mecca for party-goers and the busiest nightclub district in Queensland. The results and analysis support the conclusions that a number of elements of the physical environment influence elevated patron aggression and assault.

Faculty of Built Environment and Engineering Design Theme Conference 2008 Conference Proceedings

Proceedings of the Design Theme Postgraduate Student Conference, held 10th September 2008 at Queensland University of Technology.