Static vertical displacement measurement of bridges using Fiber Bragg Grating (FBG) sensors

Vertical displacements are one of the most relevant parameters for structural health monitoring of bridges in both the short and long terms. Bridge managers around the globe are always looking for a simple way to measure vertical displacements of bridges. However, it is difficult to carry out such measurements. On the other hand, in recent years, with the advancement of fiber-optic technologies, fiber Bragg grating (FBG) sensors are more commonly used in structural health monitoring due to their outstanding advantages including multiplexing capability, immunity of electromagnetic interference as well as high resolution and accuracy. For these reasons, using FBG sensors is proposed to develop a simple, inexpensive and practical method to measure vertical displacements of bridges. A curvature approach for vertical displacement measurements using curvature measurements is proposed. In addition, with the successful development of FBG tilt sensors, an inclination approach is also proposed using inclination measurements. A series of simulation tests of a full- scale bridge was conducted. It shows that both of the approaches can be implemented to determine vertical displacements for bridges with various support conditions, varying stiffness (EI) along the spans and without any prior known loading. These approaches can thus measure vertical displacements for most of slab-on-girder and box-girder bridges. Besides, the approaches are feasible to implement for bridges under various loading. Moreover, with the advantages of FBG sensors, they can be implemented to monitor bridge behavior remotely and in real time. A beam loading test was conducted to determine vertical displacements using FBG strain sensors and tilt sensors. The discrepancies as compared with dial gauges reading using the curvature and inclination approaches are 0.14mm (1.1%) and 0.41mm (3.2%), respectively. Further recommendations of these approaches for developments will also be discussed at the end of the paper.

Oxide reduction in NiO-containing solid solution systems during transmission electron microscopy

The effects of electron irradiation on NiO-containing solid solution systems are described. Partially hydrated NiO solid solutions, e. g. , NiO-MgO, undergo surface reduction to Ni metal after examination by TEM. This surface layer results in the formation of Moire interference patterns.

Abstraction as noise : enhancing the poetic

Abstraction in its resistance to evident meaning has the capacity to interrupt or at least provide tools with which to question an overly compliant reception of the information to which we are subject. It does so by highlighting a latency or potentiality inherent in materiality that points to the possibility of a critical resistance to this ceaseless flow of sound/image/data. This resistance has been remarked on in differing ways by a number of commentators such as Lyotard, in his exploration of the avant-garde and the sublime for example. This joint paper will initially map the collaborative project by Daniel Mafe and Andrew Brown, Affecting Interference which conjoins painting with digital sound and animations into a single, large scale, immersive exhibition/installation. The work acts as an interstitial point between contrasting approaches to abstraction: the visual and aural, the digital and analogue. The paper will then explore the ramifications of this through the examination of abstraction as ‘noise’, that is as that raw inassimilable materiality, within which lays the creative possibility to forge and embrace the as-yet-unthought and almost-forgotten. It does so by establishing a space for a more poetic and slower paced critical engagement for the viewing and receiving information or data. This slowing of perception through the suspension of easy recognition runs counter to our current ‘high performance’ culture, and it’s requisite demand for speedy assimilation of content, representing instead the poetic encounter with a potentiality or latency inherent in the nameless particularity of that which is.

Recent advances in fabrication and characterization of graphene-polymer nanocomposites

Graphene has attracted considerable interest over recent years due to its intrinsic mechanical, thermal and electrical properties. Incorporation of small quantity of graphene fillers into polymer can create novel nanocomposites with improved structural and functional properties. This review introduced the recent progress in fabrication, properties and potential applications of graphene-polymer composites. Recent research clearly confirmed that graphene-polymer nanocomposites are promising materials with applications ranging from transportation, biomedical systems, sensors, electrodes for solar cells and electromagnetic interference. In addition to graphene-polymer nanocomposites, this article also introduced the synergistic effects of hybrid graphene-carbon nanotubes (CNTs) on the properties of composites. Finally, some technical problems associated with the development of these nanocomposites are discussed.

Preliminary study on the stability of highly sensitive fiber Bragg grating temperature sensors [对高灵敏光纤光栅温度传感器的稳定性的初探]

As a novel sensitive element and due to its advantages of immunity to electrical interference, distributed measurement, etc., fiber Bragg grating (FBG) has been researched widely. To realize the substitution of high accurate electronic temperature sensors, high sensitive FBG temperature sensors can be made by taking advantage of its characters of being sensitive to both temperature and strain. Although there are reports about high sensitive FBG temperature sensors, however, few about their stability have been done. We manufactured a high sensitive FBG temperature sensor, and put it together with an average FBG temperature sensor and an electronic crystal temperature sensor into a stainless steel container filled by water to observe the room temperature change. By comparing their results in two weeks, we have found out that: although the high sensitive FBG temperature sensor is in much better agreement with the electronic crystal sensor than the average FBG sensor is, it has occurred some small drifts. Because the drifts appeared in the process of further pulling the FBG, it might be a result of the slip of the FBG fixing points. This contributes some good experiences to the application of FBG in high accuracy temperature measurement.

Optimally increasing secure connectivity in multihop wireless ad hoc networks

We consider the problem of how to maximize secure connectivity of multi-hop wireless ad hoc networks after deployment. Two approaches, based on graph augmentation problems with nonlinear edge costs, are formulated. The first one is based on establishing a secret key using only the links that are already secured by secret keys. This problem is in NP-hard and does not accept polynomial time approximation scheme PTAS since minimum cutsets to be augmented do not admit constant costs. The second one is based of increasing the power level between a pair of nodes that has a secret key to enable them physically connect. This problem can be formulated as the optimal key establishment problem with interference constraints with bi-objectives: (i) maximizing the concurrent key establishment flow, (ii) minimizing the cost. We show that both problems are NP-hard and MAX-SNP (i.e., it is NP-hard to approximate them within a factor of 1 + e for e > 0 ) with a reduction to MAX3SAT problem. Thus, we design and implement a fully distributed algorithm for authenticated key establishment in wireless sensor networks where each sensor knows only its one- hop neighborhood. Our witness based approaches find witnesses in multi-hop neighborhood to authenticate the key establishment between two sensor nodes which do not share a key and which are not connected through a secure path.

Complexity of increasing the secure connectivity in wireless ad hoc networks

We consider the problem of maximizing the secure connectivity in wireless ad hoc networks, and analyze complexity of the post-deployment key establishment process constrained by physical layer properties such as connectivity, energy consumption and interference. Two approaches, based on graph augmentation problems with nonlinear edge costs, are formulated. The first one is based on establishing a secret key using only the links that are already secured by shared keys. This problem is in NP-hard and does not accept polynomial time approximation scheme PTAS since minimum cutsets to be augmented do not admit constant costs. The second one extends the first problem by increasing the power level between a pair of nodes that has a secret key to enable them physically connect. This problem can be formulated as the optimal key establishment problem with interference constraints with bi-objectives: (i) maximizing the concurrent key establishment flow, (ii) minimizing the cost. We prove that both problems are NP-hard and MAX-SNP with a reduction to MAX3SAT problem.

The BRICS and the responsibility to protect : lessons from the Libyan and Syrian crises

The emerging ‘responsibility to protect’ (R2P) principle presents a significant challenge to the BRICS (Brazil, Russia, India, China and South Africa) states’ traditional emphasis on a strict Westphalian understanding of state sovereignty and non-interference in domestic affairs. Despite formally endorsing R2P at the 2005 World Summit, each of the BRICS has, to varying degrees, retained misgivings about coercive measures under the doctrine’s third pillar. This paper examines how these rising powers engaged with R2P during the 2011–2012 Libyan and Syrian civilian protection crises. The central finding is that although all five states expressed similar concerns over NATO’s military campaign in Libya, they have been unable to maintain a common BRICS position on R2P in Syria. Instead, the BRICS have splintered into two sub-groups. The first, consisting of Russia and China, remains steadfastly opposed to any coercive measures against Syria. The second, comprising the democratic IBSA states (India, Brazil and South Africa) has displayed softer, more flexible stances towards proposed civilian protection measures in Syria, although these three states also remain cautious about the implementation of R2P’s coercive dimension. This paper identifies a number of factors which help to explain this split, arguing that the failure to maintain a cohesive BRICS position on R2P is unsurprising given the many internal differences and diverging national interests between the BRICS members. Overall, the BRICS’ ongoing resistance to intervention is unlikely to disappear quickly, indicating that further attempts to operationalize R2P’s third pillar may prove difficult.

Spectrum sensing optimisation for dynamic primary user signal

We propose a multi-layer spectrum sensing optimisation algorithm to maximise sensing efficiency by computing the optimal sensing and transmission durations for a fast changing, dynamic primary user. Dynamic primary user traffic is modelled as a random process, where the primary user changes states during both the sensing period and transmission period to reflect a more realistic scenario. Furthermore, we formulate joint constraints to correctly reflect interference to the primary user and lost opportunity of the secondary user during the transmission period. Finally, we implement a novel duty cycle based detector that is optimised with respect to PU traffic to accurately detect primary user activity during the sensing period. Simulation results show that unlike currently used detection models, the proposed algorithm can jointly optimise the sensing and transmission durations to simultaneously satisfy the optimisation constraints for the considered primary user traffic.

The role for police in addressing alcohol-related harm inside and outside licensed premises

Alcohol consumption is enmeshed with Australian culture (Palk, 2008) and the use and misuse of alcohol contributes to considerable health and social harms (Barbor et al., 2010; English et al., 1995; Gutjahr, Gmel, & Rehm, 2001; Palk, 2008; Steenkamp, Harrison, & Allsop, 2002). Despite shifts in the way that alcohol is consumed and how it is used, it has been reported that one-third of all alcohol consumed is done so within licensed premises (Lang, Stockwell, Rydon, & Gamble, 1992). Consequently, licensed premises are over-represented as settings in which alcohol-related harms occur. These harms, particularly those related to violence, are associated with particular licensed premises operating in the night-time economy (Briscoe & Donnelly, 2001b; Chikritzhs, Stockwell, & Masters, 1997; Homel, Tomsen, & Thommeny, 1991; Stockwell, 1997). Police have a role in not only responding to the manifestation of harms, such as crime, injuries, assaults, domestic violence, stealing and sexual offences, but they also have a role in preventing problems, and thereby reducing alcohol and other drug-related harms (Doherty & Roche, 2003). Given the extent of alcohol consumption within licensed premises and the nature and extent of the harms, as well as the lack of opportunity to influence outcomes in other settings (e.g. the home), licensed premises offer police and other stakeholders a significant opportunity to influence positively the reduction of alcoholrelated harm. This research focuses specifically on the police role in policing licensed premises. Primarily, this research aims to investigate the factors which are relevant to why and how police officers respond to alcohol-related incidents inside and outside licensed premises. It examines the attitudes and beliefs of police and assesses their knowledge, capacity and ability to effectively police licensed premises. The research methodology uses three distinct surveys. Each contributes to understanding the motivations and practice of police officers in this important area of harm reduction. Study One involved a survey of police officers within a police district (Brisbane Central District) in Queensland, Australia and used a comprehensive questionnaire involving both quantitative and qualitative techniques. A key research outcome of Study One was the finding that officers had low levels of knowledge of the strategies that are effective in addressing alcohol-related harm both inside and outside licensed premises. Paradoxically, these officers also reported extensive recent experience in dealing with alcohol issues in these locations. In addition, these officers reported that alcohol was a significant contextual factor in the majority of matters to which they responded. Officers surveyed reported that alcohol increased the difficulty of responding to situations and that licensed premises (e.g. nightclubs, licensed clubs and hotels) were the most difficult contexts to police. Those surveyed were asked to self-assess their knowledge of the Liquor Act (Qld), which is the primary legislative authority in Queensland for regulating licensed premises. Surprisingly, well over half of the officers (65%) reported ‘no’ to ‘fair’ knowledge of the Act, despite officers believing that their skill level to police such premises was in the ‘good to very good range’. In an important finding, officers reported greater skill level to police outside licensed premises than inside such premises, indicating that officers felt less capable, from a skill perspective, to operate within the confines of a licensed premise than in the environment immediately outside such premises. Another key finding was that officers reported greater levels of training in responding to situations outside and around licensed premises than to situations inside licensed premises. Officers were also asked to identify the frequency with which they employed specified regulatory enforcement and community-based strategies. Irrespective of the type of response, ‘taking no action’ or passive policing interventions were not favoured by officers. The findings identified that officers favoured taking a range of strategies (sending home, releasing into the custody of friends, etc.) in preference to arrest. In another key finding, officers generally reported their support for operational stakeholder partnership approaches to policing licensed premises. This was evidenced by the high number of officers (over 90%) reporting that there should be shared responsibility for enforcing the provisions of the Liquor Act. Importantly, those surveyed also identified the factors which constrain or prevent them from policing licensed premises. Study Two involved interviewing a small but comprehensive group (n=11) of senior managers from within the Queensland Police Service (QPS) who have responsibility for setting operational and strategic policy. The aim of this study was to examine the attitudes, perceptions and influence that senior officers (at the strategy and policy-setting level) had on the officers at the operational level. This qualitative study was carried out using a purposive sampling (Denzin & Lincoln, 2005; Guba & Lincoln, 1989), focused interview and thematic analytic approach. The interview participants were drawn from three tiers of management at district, regional as well as the whole-of-organisational level. The first key theme emerging from the study related to role, in terms of both the QPS broader organisational role, and the individual officer role with respect to the policing of licensed premises. For the QPS organisational role, participants at all three strategic levels had a high degree of congruity as to the organisations service role; that is, to enhance public safety. With respect to participants’ beliefs as to whether police officers have knowledge and understanding of their individual roles concerning licensed premises (as opposed to the QPS role), participants reported most commonly that officers had a reasonable to clear understanding of their role. Participant comments also were supportive of the view that officers operating in the research area, Brisbane Central District (BCD), had a clearer understanding of their role than police operating in other locations. The second key theme to emerge identified a disparity between the knowledge and capability of specialist police, compared with general duties police, to police licensed premises. In fact, a number of the responses to a variety of questions differentiated specialist and general police in a range of domains. One such example related to the clarity of understanding of officer role. Participants agreed that specialist police (Liquor Enforcement & Proactive Strategies [LEAPS] officers) had more clarity of understanding in terms of their role than generalist police. Participants also were strongly of the opinion that specialist police had higher skill levels to deal with issues both inside and outside licensed premises. Some participants expressed the view that general duty police undertook purely response-related activities, or alternatively, dealt with lower order matters. Conversely, it was viewed that specialist police undertook more complex tasks because of their higher levels of knowledge and skill. The third key theme to emerge concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Participant responses strongly indicated that there was a diversity of resourcing barriers that restrict police from undertaking their roles in licensed premises. Examples of such barriers were the lack of police and the low ratio of police to patrons, available officer time, and lack of organisational investment in skills and knowledge acquisition. However, some participants indicated that police resourcing in the BCD was appropriate and officers were equipped with sufficient powers (policy and legislation). Again, the issue of specialist police was raised by one participant who argued that increasing the numbers of specialist police would ameliorate the difficulties for police officers policing licensed premises. The fourth and last key theme to emerge from Study Two related to the perception of senior officers regarding the opportunity and capability of officers to leverage off external partnerships to reduce harms inside and outside licensed premises. Police working in partnership in BCD was seen as an effective harm reduction strategy and strongly supported by the participants. All participants demonstrated a high degree of knowledge as to who these partners were and could identify those government, non-government and community groups precisely. Furthermore, the majority of participants also held strong views that the partnerships were reasonably effective and worked to varying degrees depending on the nature of the partnership and issues such as resourcing. These senior officers identified better communication and coordination as factors that could potentially strengthen these partnerships. This research finding is particularly important for senior officers who have the capacity to shape the policy and strategic direction of the police service, not only in Queensland but throughout Australasia. Study Three examined the perceptions of those with links to the broader liquor industry (government, non-government and community but exclusive of police) concerning their understanding of the police role and the capacity of police to reduce alcohol-related harm inside and outside licensed premises, and their attitudes towards police. Participants (n=26) surveyed represented a range of areas including the liquor industry, business represenatives and government representatives from Queensland Fire and Rescue Service, Queensland Ambulance Service, Brisbane City Council and Queensland Health. The first key theme to emerge from Study Three related to participant understanding of the QPS organisational role, and importantly, individual officer role in policing licensed premises. In terms of participant understanding of the QPS role there was a clear understanding by the majority of participants that the police role was to act in ways consistent with the law and to otherwise engage in a range of enforcement-related activities. Participants saw such activities falling into two categories. The first category related to reactive policing, which included actions around responding to trouble in licensed premises, monitoring crowd controllers and removing trouble-makers. In the second category, proactive approaches, participants identified the following activities as consistent with that approach: early intervention with offenders, support of licensed premises operators and high visibility policing. When participants were asked about their understanding of individual officer roles in the policing of licensed premises, a range of responses were received but the consistent message that emerged was that there is a different role to be played by general duty (uniformed) police compared to specialist (LEAPS Unit) police, which reflects differences in knowledge, skill and capability. The second key theme that emerged from the data related to the external participants’ views of the knowledge and capability of specialist police, compared with general duty police, to police licensed premises. As noted in the first key theme, participants were universally of the view that the knowledge, skill and capability of police in specialist units (LEAPS Unit) was at a higher level than that of general duty police. Participants observed that these specialist officers were better trained than their colleagues in generalist areas and were therefore better able to intervene knowledgeably and authoritatively to deal with problems and issues as they emerged. Participants also reported that officers working within BCD generally had a positive attitude to their duties and had important local knowledge that they could use in the resolution of alcohol-related issues. Participants also commented on the importance of sound and effective QPS leadership, as well as the quality of the leadership in BCD. On both these measures, there was general consensus from participants, who reported positively on the importance and effectiveness of such leadership in BCD. The third key theme to emerge from Study Three concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Overwhelmingly, external participants reported the lack of human resources (i.e. police officers) as the key barrier. Other resourcing limitations, such as available officer time, police computer systems, and the time taken to charge offenders, were identified as barriers. Some participants identified barriers in the liquor industry such as ‘dodgy operators’ and negative media attention as limitations. Other constraints to emerge related to government and policy barriers. These were reflected in comments about the collection by government of fees from licensees and better ‘powers’ for police to deal with offenders. The fourth and final key theme that emerged from Study Three related to the opportunities for and capability of police to leverage off external partnerships to reduce harms inside and outside licensed premises. Not surprisingly, participants had a comprehensive knowledge of a broad range of stakeholders, from a diversity of contexts, influential in addressing issues in licensed premises. Many participants reported their relationships with the police and other stakeholders as effective, productive and consistent with the objectives of partnering to reduce alcohol-related harm. On the other hand, there were those who were concerned with their relationship with other stakeholders, particularly those with a compliance function (e.g. Office of Liquor & Gaming Regulation [OLGR]). The resourcing limitations of partners and stakeholders were also raised as an important constraining factor in fulfilling the optimum relationship. Again, political issues were mentioned in terms of the impact on partnerships, with participants stating that there is at times political interference and that politicians complicate the relationships of stakeholders. There are some significant strengths with respect to the methodology of this research. The research is distinguished from previous work in that it examines these critical issues from three distinct perspectives (i.e. police officer, senior manager and external stakeholder). Other strengths relate to the strong theoretical framework that guides and informs the research. There are also some identified limitations, including the subjective nature of self-report data as well as the potential for bias by the author, which was controlled for using a range of initiatives. A further limitation concerns the potential for transferability and generalisability of the findings to other locations given the distinctive nature of the BCD. These limitations and issues of transferability are dealt with at length in the thesis. Despite a growing body of literature about contextual harms associated with alcohol, and specific research concerning police intervention in such contextual harms, there is still much to learn. While research on the subject of police engaging in alcohol-related incidents has focused on police behaviours and strategies in response to such issues, there is a paucity of research that focuses on the knowledge and understanding of officers engaged in such behaviours and practices. Given the scarcity of research dealing with the knowledge, skills and attitudes of police officers responding to harms inside and outside licensed premises, this research contributes significantly to what is a recent and growing body of research and literature in the field. The research makes a practical contribution to police agencies’ understanding of officer knowledge and police practice in ways that have the potential to shape education and training agendas, policy approaches around generalist versus specialist policing, strategic and operational strategy, as well as partnership engagements. The research also makes a theoretical contribution given that the research design is informed by the Three Circle

What should I say?: Qualitative findings on dilemmas in palliative care nursing

The nursing literature suggests that talking and listening to patients about issues associated with death and dying, is both important and difficult, and may be improved with training. This discussion presents the results of recent nursing research to confirm, and elaborate on, this theme. In this research participants touched on many central issues in communicating with patients that included articulating a sense of discomfort and inadequacy about the whole process, detailing the innumerable blocks to open communication [e.g., interference, denial, unrealistic optimism, resistance, collusion and anger] and sharing their sense of success and failure. The insights of nurses who participated in this research testify to the ongoing need to prioritize the development of nursing skills and support in this challenging but important area.

Modelling the information seeking user by the decision they make

The article focuses on how the information seeker makes decisions about relevance. It will employ a novel decision theory based on quantum probabilities. This direction derives from mounting research within the field of cognitive science showing that decision theory based on quantum probabilities is superior to modelling human judgements than standard probability models [2, 1]. By quantum probabilities, we mean decision event space is modelled as vector space rather than the usual Boolean algebra of sets. In this way,incompatible perspectives around a decision can be modelled leading to an interference term which modifies the law of total probability. The interference term is crucial in modifying the probability judgements made by current probabilistic systems so they align better with human judgement. The goal of this article is thus to model the information seeker user as a decision maker. For this purpose, signal detection models will be sketched which are in principle applicable in a wide variety of information seeking scenarios.

A class B switch-mode assisted linear amplifier

A switch-mode assisted linear amplifier (SMALA) combining a linear (Class B) and a switch-mode (Class D) amplifier is presented. The usual single hysteretic controlled half-bridge current dumping stage is replaced by two parallel buck converter stages, in a parallel voltage controlled topology. These operate independently: one buck converter sources current to assist the upper Class B output device, and a complementary converter sinks current to assist the lower device. This topology lends itself to a novel control approach of a dead-band at low power levels where neither class D amplifier assists, allowing the class B amplifier to supply the load without interference, ensuring high fidelity. A 20 W implementation demonstrates 85% efficiency, with distortion below 0.08% measured across the full audio bandwidth at 15 W. The class D amplifier begins assisting at 2 W, and below this value, the distortion was below 0.03%. Complete circuitry is given, showing the simplicity of the additional class D amplifier and its corresponding control circuitry.

Mutations in cardiac T-Box Factor gene TBX20 are associated with diverse cardiac pathologies, including defects of septation and valvulogenesis and cardiomyopathy

The T-box family transcription factor gene TBX20 acts in a conserved regulatory network, guiding heart formation and patterning in diverse species. Mouse Tbx20 is expressed in cardiac progenitor cells, differentiating cardiomyocytes, and developing valvular tissue, and its deletion or RNA interference-mediated knockdown is catastrophic for heart development. TBX20 interacts physically, functionally, and genetically with other cardiac transcription factors, including NKX2-5, GATA4, and TBX5, mutations of which cause congenital heart disease (CHD). Here, we report nonsense (Q195X) and missense (I152M) germline mutations within the T-box DNA-binding domain of human TBX20 that were associated with a family history of CHD and a complex spectrum of developmental anomalies, including defects in septation, chamber growth, and valvulogenesis. Biophysical characterization of wild-type and mutant proteins indicated how the missense mutation disrupts the structure and function of the TBX20 T-box. Dilated cardiomyopathy was a feature of the TBX20 mutant phenotype in humans and mice, suggesting that mutations in developmental transcription factors can provide a sensitized template for adult-onset heart disease. Our findings are the first to link TBX20 mutations to human pathology. They provide insights into how mutation of different genes in an interactive regulatory circuit lead to diverse clinical phenotypes, with implications for diagnosis, genetic screening, and patient follow-up.

Fabrication and mechanical and thermal behaviour of graphene oxide/epoxy nanocomposites

Bulk amount of graphite oxide was prepared by oxidation of graphite using the modified Hummers method and its ultrasonication in organic solvents yielded graphene oxide (GO). X-ray diffraction (XRD) pattern, X-ray photoelectron (XPS), Raman and Fourier transform infrared (FTIR) spectroscopy indicated the successful preparation of GO. XPS survey spectrum of GO revealed the presence of 66.6 at% C and 30.4 at% O. Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) images of the graphene oxide showed that they consist of a large amount of graphene oxide platelets with a curled morphology containing of a thin wrinkled sheet like structure. AFM image of the exfoliated GO signified that the average thickness of GO sheets is ~1.0 nm which is very similar to GO monolayer. GO/epoxy nanocomposites were prepared by typical solution mixing technique and influence of GO on mechanical and thermal properties of nanocomposites were investigated. As for the mechanical behaviour of GO/epoxy nanocomposites, 0.5 wt% GO in the nanocomposite achieved the maximum increase in the elastic modulus (~35%) and tensile strength (~7%). The TEM analysis provided clear image of microstructure with homogeneous dispersion of GO in the polymer matrix. The improved strength properties of GO/epoxy nanocomposites can be attributed to inherent strength of GO, the good dispersion and the strong interfacial interactions between the GO sheets and the polymer matrix. However, incorporation of GO showed significant negative effect on composite glass transition temperature (Tg). This may arise due to the interference of GO on curing reaction of epoxy.