Destined to design? How and why Australian women choose to study industrial design

Despite over three decades of legislation and initiatives designed to tackle the traditional gender divide in the science, technology and design fields, only a quarter of the registered architects in Australia are women. There are no statistics available for other design disciplines, with little known about why women choose design as a career path and who or what influences this decision. This qualitative research addresses this knowledge gap, through semi-structured in-depth interviews conducted with 19 Australian women who completed an industrial (product) design degree. Thematic analysis revealed three key themes: childhood aptitude and exposure; significant experiences and people; and design as a serendipitous choice. The findings emphasise the importance of early exposure to design as a potential career choice, highlighting the critical role played by parents, teachers, professionals and social networks.

Studying industrial design : Exploring the experience of female students

Despite a significant increase in the number of women enrolling and graduating from design courses, the reality is that women remain ‘invisible’ in the design profession (Bruce, 1985). Over two decades ago, Bruce and Lewis (1990) argued that women were less likely than men to be designers due to three key gendered hurdles: the completion of a design degree, getting a design job and obtaining success in a design job. This paper focuses specifically on Australian women’s experience of hurdle one: the completion of a design degree, utilising industrial design as a case study. Semi-structured interview questions (exploring issues such as experience in class and the workshop, accessibility of the course and content, types of projects etc) were recorded and transcribed verbatim, with a thematic analysis conducted to better understand women’s experiences in completing their industrial design degree. This paper focuses on one key theme “navigating the design studio”, which comprises of three sub-themes: design skill development, the workshop experience and course evaluation. These findings highlight the need to understand the educational experience to ensure female designers remain motivated and eventually employable.

Industrial Designer

A discussion with Dr Rafael Gomez on Industrial Design for the Nelson Senior Graphics for Queensland Schools publication.

Bioaerosols associated with industrial green waste composting facilities and optimal microbiological indicators

This project developed and assessed a standard operating procedure for monitoring microbiological aerosol levels and dispersal from Australian industrial composting facilities. Development occurred via seasonal monitoring of such operations with evaluation of optimal microbial indicator organisms, sampling and analysis logistics. The resultant procedure allows practical end-user assessment of compost-associated bioaerosol levels, and potential health risks to proximal residential populations encroaching on such composting facilities and on-site industrial operations personnel.

Experiments and experiences with dependability for a large autonomous industrial vehicle

This paper describes the experiences gained performing multiple experiments while developing a large autonomous industrial vehicle. Hot Metal Carriers (HMCs) are large forklift-type vehicles used in the light metals industry to move molten or hot metal around a smelter. Autonomous vehicles of this type must be dependable as they are large and potentially hazardous to infrastructure and people. This paper will talk about four aspects of dependability, that of safety, reliability, availability and security and how they have been addressed on our experimental autonomous HMC.

Applying digital product memories in industrial production

Industrial production and supply chains face increased demands for mass customization and tightening regulations on the traceability of goods, leading to higher requirements concerning flexibility, adaptability, and transparency of processes. Technologies for the ’Internet of Things' such as smart products and semantic representations pave the way for future factories and supply chains to fulfill these challenging market demands. In this chapter a backend-independent approach for information exchange in open-loop production processes based on Digital Product Memories DPMs is presented. By storing order-related data directly on the item, relevant lifecycle information is attached to the product itself. In this way, information handover between several stages of the value chain with focus on the manufacturing phase of a product has been realized. In order to report best practices regarding the application of DPM in the domain of industrial production, system prototype implementations focusing on the use case of producing and handling a smart drug case are illustrated.

Hospital infection control units: Staffing, costs, and priorities

Background: This article describes infection prevention and control professionals’ (ICPs’) staffing levels, patient outcomes, and costs associated with the provision of infection prevention and control services in Australian hospitals. A secondary objective was to determine the priorities for infection control units. Methods: A cross-sectional study design was used. Infection control units in Australian public and private hospitals completed a Web-based anonymous survey. Data collected included details about the respondent; hospital demographics; details and services of the infection control unit; and a description of infection prevention and control-related outputs, patient outcomes, and infection control priorities. Results: Forty-nine surveys were undertaken, accounting for 152 Australian hospitals. The mean number of ICPs was 0.66 per 100 overnight beds (95% confidence interval, 0.55-0.77). Privately funded hospitals have significantly fewer ICPs per 100 overnight beds compared with publicly funded hospitals (P < .01). Staffing costs for nursing staff in infection control units in this study totaled $16,364,392 (mean, $380,566). Infection control units managing smaller hospitals (<270 beds) identified the need for increased access to infectious diseases or microbiology support. Conclusion: This study provides valuable information to support future decisions by funders, hospital administrators, and ICPs on service delivery models for infection prevention and control. Further, it is the first to provide estimates of the resourcing and cost of staffing infection control in hospitals at a national level. Copyright

Wastewater pollution abatement in China: A comparative study of fifteen industrial sectors from 1998 to 2010

This study analyzes the management of wastewater pollutants in a number of Chinese industrial sectors from 1998 to 2010. We use decomposition analysis to calculate changes in wastewater pollutant emissions that result from cleaner production processes, end-of-pipe treatment, structural changes in industry, and changes in the scale of production. We focus on one indicator of water quality and three pollutants: chemical oxygen demand (COD), petroleum, cyanide, and volatile phenols. We find that until 2002, COD emissions were mainly reduced through end-of-pipe treatments. Cleaner production processes didn’t begin contributing to COD emissions reductions until the introduction of a 2003 law that enforced their implementation. Petroleum emissions were primarily lowered through cleaner production mechanisms, which have the added benefit of reducing the input cost of intermediate petroleum. Diverse and effective pollution abatement strategies for cyanide and volatile phenols are emerging among industries in China. It will be important for the government to consider differences between industries should they choose to regulate the emissions of specific chemical substances.

Water use and wastewater discharge of industrial sector in China

Problem of water scarcity has been increasingly severe in China. Though industrial sectors play important role for the rapid economic growth, and they consumes water and discharge wastewater. The purpose of this study is to examine the efficiency of water use and wastewater discharge in comparison with those of other inputs and production output in Chinese industry. Measuring efficiency of each input and output factor from 2002 to 2008, we find the average inefficiencies of industrial water use and industrial wastewater discharge are higher than those of capital, labor, and production output in China. In addition, the productivity levels to save water in the water shortage areas are not higher compared to the others. The water use inefficiency has a high dispersion especially in the regions where the amounts of water resources per capita is less than 3000 cubic meter.

A novel experimental method to assess industrial aerosol deposition in idealized porous channels

A novel and economical experimental technique has been developed to assess industrial aerosol deposition in various idealized porous channel configurations. This judicious examination on aerosol penetration in porous channels will assist engineers to better optimize designs for various engineering applications. Deposition patterns differ with porosity due to geometric configurations of the channel and superficial inlet velocities. Interestingly, it is found that two configurations of similar porosity exhibit significantly higher deposition fractions. Inertial impaction is profound at the leading edge of all obstacles, whereas particle build-up is observed at the trailing edge of the obstructions. A qualitative analysis shows that the numerical results are in good agreement with experimental results.

Prehospital paediatric burn care: New priorities in paramedic reporting

OBJECTIVE: The present study evaluates the prehospital care of paediatric burn patients in Queensland (QLD). As first aid (FA) treatment has been shown to affect burn progression and outcome, the FA treatment and the risk of associated hypothermia in paediatric patients were specifically examined in the context of paramedic management of burn patients. METHODS: Data were retrospectively collected from electronic ambulance response forms (eARFs) for paediatric burn patients (0-5 years) who were attended by Queensland Ambulance Service (QAS) from 2008 to 2010. Data were collected from 117 eARFs of incidents occurring within the Brisbane, Townsville and Cairns regions. RESULTS: Initial FA measures were recorded in 77.8% of cases, with cool running water FA administered in 56.4% of cases. The duration of FA was recorded in 29.9% of reports. The duration of FA was significantly shorter for patients in Northern QLD (median = 10 min, n = 10) compared with Brisbane (median = 15 min, n = 18), P = 0.005. Patient temperatures were recorded significantly more often in Brisbane than in other regions (P = 0.041); however, in total, only 24.8% of all patients had documented temperature readings. Of these, six (5%) were recorded as having temperatures ≤ 36.0°C. Burnaid(TM) was the most commonly used dressing and was applied to 55.6% of all patients; however, it was applied with a variety of different outer dressings. Brisbane paramedics applied Burnaid significantly less often (44.3%) compared with paramedics from Northern QLD (72.7%) and Far Northern QLD (60.9%), P = 0.025. CONCLUSIONS: Despite FA and patient temperatures being important prognostic factors for burn patients, paramedic documentation of these was often incomplete, and there was no consistent use of burns dressings.

We need to fund more than just science priorities for Australia’s future

Australia's Science and Research Priorities focus on activating STEM researchers (science, technology, engineering, maths). In this article in The Conversation, Professor Marcus Foth argues that we need to fund more than just science priorities for Australia’s future.

The ghost in the city industrial complex: Le Corbusier and the fascist theory of Urbanisme

Le Corbusier participated in an urban dialogue with the first group in France to call itself fascist: the journalist Georges Valois’s militant Faisceau des Combattants et Producteurs (1925-1927), the “Blue Shirts,” inspired by the Italian “Fasci” of Mussolini. Le Corbusier’s portrait photograph materialised on the front cover of the January 1927 issue of the Faisceau League’s newspaper Le Nouveau Siècle edited by the former anarcho-syndicalist journalist Georges Valois, its leader, who fashioned himself as the French Mussolini. Le Corbusier was described in the Revue as one of les animateurs (the “organisers”) of the Party1 – meaning a member of the technical elite who would drive the Faisceau’s plans. On 1 May 1927, the Nouveau Siècle printed a full-page feature “Le Plan Voisin” on Le Corbusier’s 1922 redesign of Paris : the architect’s single-point perspective sketch appeared below an extract lifted from the architect’s original polemic Le Centre de Paris on the pages of Le Corbusier’s second book Urbanisme published two years earlier, a treatise on urbanism.2 Three weeks later, Le Corbusier presented a slide show of his urban plans at a fascist rally for the inauguration of the Faisceau’s new headquarters on the rue du faubourg Poissonniere, thereby crystalising the architect’s hallowed status in the league...

Juggling priorities: Balancing economic and social drivers to address the LLN needs of students in the VET sector

Economic success, and a commitment to the social benefits of inclusive training opportunities are important goals for public vocational education and training (VET). Currently, in Australia, VET policy is a shared responsibility between the Commonwealth and the States and Territories. Priorities for investment are juggled between: a) improving efficiency and responsiveness; and b) providing societal prosperity. Amid recent VET educational reforms and policy directives the authors of this paper undertook a pilot study examining language, literacy and numeracy support and inclusive teaching and learning practices in a Diploma of Nursing course. The data highlighted implications arising from new market driven education reforms. This article reports on identified factors that influenced inclusive learning opportunities, noticeably associated with two recent policy developments: the release of the FSK Foundation Skills Training Package (IBSA 2014); and the Queensland's Higher Skills Program Policy 2014-15.

Enhancing learning for research higher degree students

Universities’ push toward the production of high quality research is not limited to academic staff and experienced researchers. In this environment of research rich agendas, Higher Degree Research (HDR) students are increasingly expected to engage in the publishing of good quality papers in high impact journals. IFN001: Advanced Information Research Skills (AIRS) is a credit bearing mandatory coursework requirement for Queensland University of Technology (QUT) doctorates. Since its inception in 1989, this unique blended learning program has provided the foundations for new researchers to produce original and innovative research. AIRS was redeveloped in 2012, and has now been evaluated with reference to the university’s strategic research priorities. Our research is the first comprehensive evaluation of the program from the learner perspective. We measured whether the program develops essential transferrable skills and graduate capabilities to ensure best practice in the areas of publishing and data management. In particular, we explored whether AIRS prepares students to be agile researchers with the skills to adapt to different research contexts both within and outside academia. The target group for our study consisted of HDR students and supervisors at QUT. Both quantitative and qualitative research methods were used for data collection. Gathering data was by survey and focus groups with qualitative responses analyzed using NVivo. The results of the survey show that 82% of students surveyed believe that AIRS assisted their research process and helped them learn skills they need as a researcher. The 18% of respondents who expressed reservation about the benefits of AIRS were also examined to determine the key areas of concern. These included trends related to the timing of the program early in the candidature and a belief among some students that their previous research experience was sufficient for postgraduate study. New insights have been gained into how to better support HDR learners in partnership with supervisors and how to enhance learning experiences of specific cohorts, including international students and mature learners.