The case for “n«all”: Why the Big Data revolution will probably happen differently in the mining sector

Big Data and predictive analytics have received significant attention from the media and academic literature throughout the past few years, and it is likely that these emerging technologies will materially impact the mining sector. This short communication argues, however, that these technological forces will probably unfold differently in the mining industry than they have in many other sectors because of significant differences in the marginal cost of data capture and storage. To this end, we offer a brief overview of what Big Data and predictive analytics are, and explain how they are bringing about changes in a broad range of sectors. We discuss the “N=all” approach to data collection being promoted by many consultants and technology vendors in the marketplace but, by considering the economic and technical realities of data acquisition and storage, we then explain why a “n « all” data collection strategy probably makes more sense for the mining sector. Finally, towards shaping the industry’s policies with regards to technology-related investments in this area, we conclude by putting forward a conceptual model for leveraging Big Data tools and analytical techniques that is a more appropriate fit for the mining sector.

Osmolality electrolyte and carbohydrate type and oral rehydration solutions: A controlled study to compare the efficacy of two commercially available solutions (osmolalities 240 mmol/L and 340 mmol/L)

An open-label, inpatient study was undertaken to compare the efficacy of two oral rehydration solutions (ORS) given randomly to children aged 1-10 years who had acute gastroenteritis with mild or moderate dehydration (n = 45). One solution contained 60 mmol/L sodium and 1.8% glucose, total osmolality 240 mosm/l (gastrolyte, Rhone-poulenc, Rorer) and the other contained 26 mmol/l sodium, 2.7% glucose and 3.6% sucrose, total osmolality 340 mOsm/l (Glucolyte, Gilseal). Analysis of data indicated that Gastrolyte therapy resulted in significantly fewer episodes and volume of vomiting over all time periods in comparison to Glucolyte and significantly less stool volume during the first 8 h and in the 0-24 h period. The differences between treatments in degree of dehydration at each follow-up period, duration of diarrhea, and duration of hospital stay were not significant. No adverse drug reactions occurred. Six patients received intravenous rehydration treatment and were considered treatment failures. We conclude that oral rehydration therapy is safe and efficacious in the management of dehydration in acute diarrhoea and that the lower osmolar rehydration solution has clinically marginal advantages.

Design-driven digital futures: The role of design-led innovation in the creation of online connected communities for new mobility solutions

Online communities have fundamentally changed how humans connected and are now so common they are fundamental to the human experience. As the Internet developed for Web 1.0 to Web 2.0, the functionality of these communities has far exceeded initial expectations. These communities have shifted from simply places to share information to ways to access products and services that bridge the online and offline worlds. This shift has led to the disruption of many industries with the transportation industry being one such sector. Both private transport providers and public transport systems face competition from online communities who are able to link services providers and customers more effectively and innovatively. These types of communities fall under what has been popularised as collaborative consumption or the sharing economy. The aim of this study is to explore the role of Design-led Innovation in the creation of digital futures, specifically online connected communities for successful new mobility solutions. To explore this proposition multiple data collection methods are proposed;Content Analysis, ii) A Comparative Qualitative Study consisting of Qualitative Interviews and Focus Groups / Design Workshops and iii) An Action Research Cycle of Embedded Practice. The multidisciplinary nature of this study grounds this research in a novel position contributing to new knowledge in both the field of design, and also a deeper understanding of the larger fast-growing online community phenomena.

Abstract concepts made real: A pilot study examining pedagogical approaches in thermodynamics tutorials

BACKGROUND OR CONTEXT Thermodynamics is a core concept for mechanical engineers yet notoriously difficult. Evidence suggests students struggle to understand and apply the core fundamental concepts of thermodynamics with analysis indicating a problem with student learning/engagement. A contributing factor is that thermodynamics is a ‘science involving concepts based on experiments’ (Mayhew 1990) with subject matter that cannot be completely defined a priori. To succeed, students must engage in a deep-holistic approach while taking ownership of their learning. The difficulty in achieving this often manifests itself in students ‘not getting’ the principles and declaring thermodynamics ‘hard’. PURPOSE OR GOAL Traditionally, students practice and “learn” the application of thermodynamics in their tutorials, however these do not consider prior conceptions (Holman & Pilling 2004). As ‘hands on’ learning is the desired outcome of tutorials it is pertinent to study methods of improving their efficacy. Within the Australian context, the format of thermodynamics tutorials has remained relatively unchanged over the decades, relying anecdotally on a primarily didactic pedagogical approach. Such approaches are not conducive to deep learning (Ramsden 2003) with students often disengaged from the learning process. Evidence suggests (Haglund & Jeppsson 2012), however, that a deeper level and ownership of learning can be achieved using a more constructivist approach for example through self generated analogies. This pilot study aimed to collect data to support the hypothesis that the ‘difficulty’ of thermodynamics is associated with the pedagogical approach of tutorials rather than actual difficulty in subject content or deficiency in students. APPROACH Successful application of thermodynamic principles requires solid knowledge of the core concepts. Typically, tutorial sessions guide students in this application. However, a lack of deep and comprehensive understanding can lead to student confusion in the applications resulting in the learning of the ‘process’ of application without understanding ‘why’. The aim of this study was to gain empirical data on student learning of both concepts and application, within thermodynamic tutorials. The approach taken for data collection and analysis was: - 1 Four concurrent tutorial streams were timetabled to examine student engagement/learning in traditional ‘didactic’ (3 weeks) and non-traditional (3 weeks). In each week, two of the selected four sessions were traditional and two non-traditional. This provided a control group for each week. - 2 The non-traditional tutorials involved activities designed to promote student-centered deep learning. Specific pedagogies employed were: self-generated analogies, constructivist, peer-to-peer learning, inquiry based learning, ownership of learning and active learning. - 3 After a three-week period, teaching styles of the selected groups was switched, to allow each group to experience both approaches with the same tutor. This also acted to mimimise any influence of tutor personality / style on the data. - 4 At the conclusion of the trial participants completed a ‘5 minute essay’ on how they liked the sessions, a small questionnaire, modelled on the modified (Christo & Hoang, 2013)SPQ designed by Biggs (1987) and a small formative quiz to gauge the level of learning achieved. DISCUSSION Preliminary results indicate that overall students respond positively to in class demonstrations (inquiry based learning), and active learning activities. Within the active learning exercises, the current data suggests students preferred individual rather than group or peer-to-peer activities. Preliminary results from the open-ended questions such as “What did you like most/least about this tutorial” and “do you have other comments on how this tutorial could better facilitate your learning”, however, indicated polarising views on the nontraditional tutorial. Some student’s responded that they really like the format and emphasis on understanding the concepts, while others were very vocal that that ‘hated’ the style and just wanted the solutions to be presented by the tutor. RECOMMENDATIONS/IMPLICATIONS/CONCLUSION Preliminary results indicated a mixed, but overall positive response by students with more collaborative tutorials employing tasks promoting inquiry based, peer-to-peer, active, and ownership of learning activities. Preliminary results from student feedback supports evidence that students learn differently, and running tutorials focusing on only one pedagogical approached (typically didactic) may not be beneficial to all students. Further, preliminary data suggests that the learning / teaching style of both students and tutor are important to promoting deep learning in students. Data collection is still ongoing and scheduled for completion at the end of First Semester (Australian academic calendar). The final paper will examine in more detail the results and analysis of this project.

Residential tariff structure and battery energy storage impact in queensland LV network

Distributed renewable energy has become a significant contender in the supply of power in the distribution network in Queensland and throughout the world. As the cost of battery storage falls, distribution utilities turn their attention to the impacts of battery storage and other storage technologies on the low voltage (LV) network. With access to detailed residential energy usage data, Energex's available residential tariffs are investigated for their effectiveness in providing customers with financial incentives to move to Time-of Use based tariffs and to reward use of battery storage.

A network forensics tool for precise data packet capture and replay in cyber-physical systems

Network data packet capture and replay capabilities are basic requirements for forensic analysis of faults and security-related anomalies, as well as for testing and development. Cyber-physical networks, in which data packets are used to monitor and control physical devices, must operate within strict timing constraints, in order to match the hardware devices' characteristics. Standard network monitoring tools are unsuitable for such systems because they cannot guarantee to capture all data packets, may introduce their own traffic into the network, and cannot reliably reproduce the original timing of data packets. Here we present a high-speed network forensics tool specifically designed for capturing and replaying data traffic in Supervisory Control and Data Acquisition systems. Unlike general-purpose "packet capture" tools it does not affect the observed network's data traffic and guarantees that the original packet ordering is preserved. Most importantly, it allows replay of network traffic precisely matching its original timing. The tool was implemented by developing novel user interface and back-end software for a special-purpose network interface card. Experimental results show a clear improvement in data capture and replay capabilities over standard network monitoring methods and general-purpose forensics solutions.

Combinatorial Design of Secure Lightweight Data Dispersal Schemes (Work in Progress)

Dispersing a data object into a set of data shares is an elemental stage in distributed communication and storage systems. In comparison to data replication, data dispersal with redundancy saves space and bandwidth. Moreover, dispersing a data object to distinct communication links or storage sites limits adversarial access to whole data and tolerates loss of a part of data shares. Existing data dispersal schemes have been proposed mostly based on various mathematical transformations on the data which induce high computation overhead. This paper presents a novel data dispersal scheme where each part of a data object is replicated, without encoding, into a subset of data shares according to combinatorial design theory. Particularly, data parts are mapped to points and data shares are mapped to lines of a projective plane. Data parts are then distributed to data shares using the point and line incidence relations in the plane so that certain subsets of data shares collectively possess all data parts. The presented scheme incorporates combinatorial design theory with inseparability transformation to achieve secure data dispersal at reduced computation, communication and storage costs. Rigorous formal analysis and experimental study demonstrate significant cost-benefits of the presented scheme in comparison to existing methods.