Treatment plan complexity metrics for predicting IMRT pre-treatment quality assurance results

The planning of IMRT treatments requires a compromise between dose conformity (complexity) and deliverability. This study investigates established and novel treatment complexity metrics for 122 IMRT beams from prostate treatment plans. The Treatment and Dose Assessor software was used to extract the necessary data from exported treatment plan files and calculate the metrics. For most of the metrics, there was strong overlap between the calculated values for plans that passed and failed their quality assurance (QA) tests. However, statistically significant variation between plans that passed and failed QA measurements was found for the established modulation index and for a novel metric describing the proportion of small apertures in each beam. The ‘small aperture score’ provided threshold values which successfully distinguished deliverable treatment plans from plans that did not pass QA, with a low false negative rate.

Ambiguity Acceptance Testing : A Comparison of the Ratio Test and Difference Test

Integer ambiguity resolution is an indispensable procedure for all high precision GNSS applications. The correctness of the estimated integer ambiguities is the key to achieving highly reliable positioning, but the solution cannot be validated with classical hypothesis testing methods. The integer aperture estimation theory unifies all existing ambiguity validation tests and provides a new prospective to review existing methods, which enables us to have a better understanding on the ambiguity validation problem. This contribution analyses two simple but efficient ambiguity validation test methods, ratio test and difference test, from three aspects: acceptance region, probability basis and numerical results. The major contribution of this paper can be summarized as: (1) The ratio test acceptance region is overlap of ellipsoids while the difference test acceptance region is overlap of half-spaces. (2) The probability basis of these two popular tests is firstly analyzed. The difference test is an approximation to optimal integer aperture, while the ratio test follows an exponential relationship in probability. (3) The limitations of the two tests are firstly identified. The two tests may under-evaluate the failure risk if the model is not strong enough or the float ambiguities fall in particular region. (4) Extensive numerical results are used to compare the performance of these two tests. The simulation results show the ratio test outperforms the difference test in some models while difference test performs better in other models. Particularly in the medium baseline kinematic model, the difference tests outperforms the ratio test, the superiority is independent on frequency number, observation noise, satellite geometry, while it depends on success rate and failure rate tolerance. Smaller failure rate leads to larger performance discrepancy.

Examination of the properties of IMRT and VMAT beams and evaluation against pre-treatment quality assurance results

This study aimed to provide a detailed evaluation and comparison of a range of modulated beam evaluation metrics, in terms of their correlation with QA testing results and their variation between treatment sites, for a large number of treatments. Ten metrics including the modulation index (MI), fluence map complexity (FMC), modulation complexity score (MCS), mean aperture displacement (MAD) and small aperture score (SAS) were evaluated for 546 beams from 122 IMRT and VMAT treatment plans targeting the anus, rectum, endometrium, brain, head and neck and prostate. The calculated sets of metrics were evaluated in terms of their relationships to each other and their correlation with the results of electronic portal imaging based quality assurance (QA) evaluations of the treatment beams. Evaluation of the MI, MAD and SAS suggested that beams used in treatments of the anus, rectum, head and neck were more complex than the prostate and brain treatment beams. Seven of the ten beam complexity metrics were found to be strongly correlated with the results from QA testing of the IMRT beams (p < 0.00008). For example, Values of SAS (with MLC apertures narrower than 10 mm defined as “small”) less than 0.2 also identified QA passing IMRT beams with 100% specificity. However, few of the metrics are correlated with the results from QA testing of the VMAT beams, whether they were evaluated as whole 360◦ arcs or as 60◦ sub-arcs. Select evaluation of beam complexity metrics (at least MI, MCS and SAS) is therefore recommended, as an intermediate step in the IMRT QA chain. Such evaluation may also be useful as a means of periodically reviewing VMAT planning or optimiser performance.

Biomechanics of transfemoral amputees fitted with osseointegrated fixation: Loading data for evidence-based practice

This presentation will provide an overview of the load applied on the residuum of transfemoral amputees fitted with an osseointegrated fixation during (A) rehabilitation, including static and dynamic load bearing exercises (e.g., rowing, adduction, abduction, squat, cycling, walking with aids), and (B) activities of daily living including standardized activities (e.g., level walking in straight line and around a circle, ascending and descending slopes and stairs) and activities in real world environments.

Empirical reference points for Bernstein’s model of pedagogic rights: Recontextualising the reconciliation agenda to Australian schooling

In this chapter we use Bernstein’s (2000) model of pedagogic rights to examine the learning experiences for non-Indigenous teachers in two reconciliation projects. In the context within which we write, reconciliation is the process of establishing a culture of mutual respect between Aboriginal and Torres Strait Islander peoples and non-Indigenous Australians. In 1991, the Royal Commission into Aboriginal Deaths in Custody linked the continuation of racism in Australian society to the weak coverage of Aboriginal and Torres Strait Islander content in the school curriculum (Reconciliation Australia 2010). Nearly two decades later, the Melbourne Declaration on Educational Goals for Young Australians issued by the council of Federal, State and Territory Ministers of Education proclaimed that curriculum should enable all students to ‘understand and acknowledge the value of Indigenous cultures and possess the knowledge, skills and understanding to contribute to, and benefit from reconciliation between Indigenous and non-Indigenous Australians’ (MCEETYA 2008, 9). Education holds out promise not only of better life chances for Indigenous young people, but also of replacing myths with understanding and tackling prejudice and racism within the non-Indigenous population. Bernstein’s (2000) model of pedagogic rights promises some purchase on this pedagogic work by providing concepts for looking systematically at the participation of non-Indigenous teachers in education. As observed by Frandji and Vitale (Chapter 2, this volume), the model is not sufficient to achieve a democratic reality, ‘but simply provides a basis for problematizing reality and considering possibilities’.

Striving for a better world: Lessons from Freire in Grenada, Jamaica and Australia

The author of this paper considers the influence of Paulo Freire’s pedagogical philosophy on educational practice in three different geographical/political settings. She begins with reflections on her experience as a facilitator at Freire’s seminar, held in Grenada in 1980 for teachers and community educators, on the integration of work and study. This case demonstrates how Freire’s method of dialogic education achieved outcomes for the group of thoughtful collaboration leading to conscientisation in terms of deep reflection on their lives as teachers in Grenada and strategies for decolonising education and society. The second case under consideration is the arts-based pedagogy shaping the work of the Area Youth Foundation (AYF) in Kingston, Jamaica. Young participants, many of them from tough socio-economic backgrounds, are empowered by learning how to articulate their own experiences and relate these to social change. They express this conscientisation by creating stage performances, murals, photo-novella booklets and other artistic products. The third case study describes and evaluates the Honey Ant Reader project in Alice Springs, Australia. Aboriginal children, as well as the adults in their community, learn to read in their local language as well as Australian Standard English, using booklets created from indigenous stories told by community Elders, featuring local customs and traditions. The author analyses how the “Freirean” pedagogy in all three cases exemplifies the process of encouraging the creation of knowledge for progressive social change, rather than teaching preconceived knowledge. This supports her discussion of the extent to which this is authentic to the spirit of the scholar/teacher Paulo Freire, who maintained that in our search for a better society, the world has to be made and remade. Her second, related aim is to raise questions about how education aligned with Freirean pedagogy can contribute to moving social change from the culture circle to the public sphere.

Daubism: Copyright law and artistic works

An artistic controversy over a group of landscape painters called the Daubists provided impetus for copyright law reform in Australia in the early 1990's. In the first exhibition of Daubism in 1991 driller Jet Armstrong painted a crop circle over a painting of the Olgas by Charles Bannon - an artist, print-maker, and the father of the State Premier at the time, John Bannon. He called the resulting work, Crop Circles on a Bannon Landscape. Armstrong also inserted an inverted crucifix over a painting of the Flinders Ranges by Bannon, and renamed the work The Crop Circle Conspiracy Landscape. In response, Bannon took legal action against Armstrong in the Federal Court of Australia on the grounds of false attribution and defamation. He won an interlocutory injunction against Armstrong and the gallery, but then reached a settlement with the Daubists. An anonymous buyer purchased the work for $650 on the condition that it was returned to the painter. In his fight against the Daubists, Bannon received help and support from the National Association for the Visual Arts (NAVA). This professional group used the controversy to campaign for the reform of copyright law - in particular, the need for a moral rights regime. The artistic controversy over the Daubists was a catalyst for the introduction of the Copyright Amendment (Moral Rights) Act 2000 (Cth) in Australia. It offers an illuminating case study of the operation of copyright law in the visual arts.

Solid volume fraction estimation of bone:marrow replica models using ultrasound transit time spectroscopy

The acceptance of broadband ultrasound attenuation (BUA) for the assessment of osteoporosis suffers from a limited understanding of both ultrasound wave propagation through cancellous bone and its exact dependence upon the material and structural properties. It has recently been proposed that ultrasound wave propagation in cancellous bone may be described by a concept of parallel sonic rays; the transit time of each ray defined by the proportion of bone and marrow propagated. A Transit Time Spectrum (TTS) describes the proportion of sonic rays having a particular transit time, effectively describing the lateral inhomogeneity of transit times over the surface aperture of the receive ultrasound transducer. The aim of this study was to test the hypothesis that the solid volume fraction (SVF) of simplified bone:marrow replica models may be reliably estimated from the corresponding ultrasound transit time spectrum. Transit time spectra were derived via digital deconvolution of the experimentally measured input and output ultrasonic signals, and compared to predicted TTS based on the parallel sonic ray concept, demonstrating agreement in both position and amplitude of spectral peaks. Solid volume fraction was calculated from the TTS; agreement between true (geometric calculation) with predicted (computer simulation) and experimentally-derived values were R2=99.9% and R2=97.3% respectively. It is therefore envisaged that ultrasound transit time spectroscopy (UTTS) offers the potential to reliably estimate bone mineral density and hence the established T-score parameter for clinical osteoporosis assessment.

Can the direct measurement of the load applied on the residuum of individuals with transfemoral amputation fitted with bone-anchored prosthesis help to improve the rehabilitation program?

To strive to improve the rehabilitation program of individuals with transfemoral amputation fitted with bone-anchored prosthesis based on data from direct measurements of the load applied on the residuum we first of all need to understand the load applied on the fixation. Therefore the load applied on the residuum was first directly measured during standardized activities of daily living such as straight line level walking, ascending and descending stairs and a ramp and walking around a circle. From measuring the load in standardized activities of daily living the load was also measured during different phases of the rehabilitation program such as during walking with walking aids and during load bearing exercises.[1-15] The rehabilitation program for individuals with a transfemoral amputation fitted with an OPRA implant relies on a combination of dynamic and static load bearing exercises.[16-20] This presentation will focus on the study of a set of experimental static load bearing exercises. [1] A group of eleven individuals with unilateral transfemoral amputation fitted with an OPRA implant participated in this study. The load on the implant during the static load bearing exercises was measured using a portable system including a commercial transducer embedded in a short pylon, a laptop and a customized software package. This apparatus was previously shown effective in a proof-of-concept study published by Prof. Frossard. [1-9] The analysis of the static load bearing exercises included an analysis of the reliability as well as the loading compliance. The analysis of the loading reliability showed a high reliability between the loading sessions indicating a correct repetition of the LBE by the participants. [1, 5] The analysis of the loading compliance showed a significant lack of axial compliance leading to a systematic underloading of the long axis of the implant during the proposed experimental static LBE.

Towards (dis)Satisfaction

Hosted at Blindside Artist-Run Initiative (Melbourne) the exhibition Towards (dis)Satisfaction (2015) was a re-staging of earlier sculptural works from the exhibitions Means are the Ends: The Command Issue and Crude Tools (2014), Feeble Actions (2013). The forms humorously interrogated representations of gender and sexuality via strategies of sculptural intervention. A stripper’s pole oozes grease from its stainless surface, fluted with holes. A dildo vibrates on a glass tabletop; propped up by simulated testicles, the intensity of the dildo’s vibrations makes the form spin. With its continual circling, the phallus drags Vaseline over the table, performing a drawing and redrawing of a smeared circle. In Towards (dis)Satisfaction fetish is used as an instrumental strategy, employed as a mode to work across different theoretical and material discourses. In the works the play between explicit and implicit depiction creates an ambiguity that has suggestive potency, where fragmentation and dysfunction initiate diverse readings. These material dialogues make apparent the anxiety and desire inherent in the viewer and question how the visual conventions of erotica and art history are mutually informative.

In response: UV–vis light transmittance through tinted contact lenses and the effect of color on values

In the study, we used the Agilent 8453 spectrophotometer (which is equipped with a limiting aperture that restricts the light beam to the central 5 mm of the contact lens), to measure the transmittance of various coloured contact lenses including the one Day Acuvue define manufactured by Johnson and Johnson which the authors represent. We measured the instrument baseline before the transmittance spectra of lenses were tested. The values of lens transmittances were thus the difference between baseline and lens measurement at each time. The transmittance measurements were obtained at 0.5 nm intervals, from 200 to 700 nm after a soak in saline to remove the influence of any surface active agents within the packaging products. The technique used in our study was not very different from how other research studies [2], [3], [4], [5] and [6] have measured the spectra transmittances of contact lenses...

Editorial of "International Journal of Critical Indigenous Studies Volume 4, Number 2, 2011"

This special edition of the International Journal of Critical Indigenous Studies focuses upon the work scholars within the growing discipline of Aboriginal and Torres Strait Islander health studies. The lamentable state of Indigenous health in Australia is reflected in Indigenous populations elsewhere, especially where settler colonialism has left an indelible mark. This special edition therefore speaks to where Indigenous health outcomes and the efficacy of remedies are causing concern. Common to all is the demand that Indigenous people are placed front and centre of all attempts to improve health outcomes and that improvements are sought in culturally sensitive ways. Terry Dunbar presents findings from a research study that set out to investigate the Indigenous experiences of health and family services in the Northern Territory, Australia. The study asserts that cultural security is an integral and vital element of any policy that will impact upon Indigenous peoples. Dunbar concludes by arguing that in seeking positive change with regard to cultural security or otherwise, the most vociferous champions of that change are likely to be the Aboriginal communities affected. The article by Bronwyn Fredericks, Karen Adams, Sandra Angus and Melissa Walker also highlights the need to involve Aboriginal and Torres Strait Islander people, in this case women, in the design and development of strategies affecting their lives. Utilising routine communication methods such the ‘talking circle’ and the process referred to as ‘talkin’ up’, where women ‘talk back’ to one another about issues of personal importance, the article argues that the health strategy which emerged through these consultation approaches was more accurately informed by and responsive to women’s health need. Indeed, the resulting strategy reflected the women’s sense of themselves and the clear direction they felt their health services and polices should take.

What might GeoHumanities do? Possibilities, practices, publics, and politics

This article draws together seven practitioners and scholars from across the diffuse GeoHumanities community to reflect on the pasts and futures of the GeoHumanities. Far from trying to circle the intellectual wagons around orthodoxies of practice or intent, or to determine possibilities in advance, these contributions and the accompanying commentary seek to create connections across the diverse communities of knowledge and practice that constitute the GeoHumanities. Ahead of these six contributions a commentary situates these discussions within wider concerns with interdisciplinarity and identifies three common themes—possibilities practices, and publics—worthy of further discus- sion and reflection. The introduction concludes by identifying a fourth theme, politics, that coheres these three themes in productive and important ways.

IASDR 2015 Interplay Exhibition 2-5 NOV 2015

It has been said that we are living in a golden age of innovation. New products, systems and services aimed to enable a better future, have emerged from novel interconnections between design and design research with science, technology and the arts. These intersections are now, more than ever, catalysts that enrich daily activities for health and safety, education, personal computing, entertainment and sustainability, to name a few. Interactive functions made possible by new materials, technology, and emerging manufacturing solutions demonstrate an ongoing interplay between cross-disciplinary knowledge and research. Such interactive interplay bring up questions concerning: (i) how art and design provide a focus for developing design solutions and research in technology; (ii) how theories emerging from the interactions of cross-disciplinary knowledge inform both the practice and research of design and (iii) how research and design work together in a mutually beneficial way. The IASDR2015 INTERPLAY EXHIBITION provides some examples of these interconnections of design research with science, technology and the arts. This is done through the presentation of objects, artefacts and demonstrations that are contextualised into everyday activities across various areas including health, education, safety, furniture, fashion and wearable design. The exhibits provide a setting to explore the various ways in which design research interacts across discipline knowledge and approaches to stimulate innovation. In education, Designing South African Children’s Health Education as Generative Play (A Bennett, F Cassim, M van der Merwe, K van Zijil, and M Ribbens) presents a set of toolkits that resulted from design research entailing generative play. The toolkits are systems that engender pleasure and responsibility, and are aimed at cultivating South African’s youth awareness of nutrition, hygiene, disease awareness and prevention, and social health. In safety, AVAnav: Avalanche Rescue Helmet (Jason Germany) delivers an interactive system as a tool to contribute to reduce the time to locate buried avalanche victims. Helmet-mounted this system responds to the contextual needs of rescuers and has since led to further design research on the interface design of rescuing devices. In apparel design and manufacturing, Shrinking Violets: Fashion design for disassembly (Alice Payne) proposes a design for disassembly through the use of beautiful reversible mono-material garments that interactively responds to the challenges of garment construction in the fashion industry, capturing the metaphor for the interplay between technology and craft in the fashion manufacturing industry. Harvest: A biotextile future (Dean Brough and Alice Payne), explores the interplay of biotechnology, materiality and textile design in the creation of sustainable, biodegradable vegan textile through the process of a symbiotic culture of bacteria and yeast (SCOBY). SCOBY is a pellicle curd that can be harvested, machine washed, dried and cut into a variety of designs and texture combinations. The exploration of smart materials, wearable design and micro-electronics led to creative and aesthetically coherent stimulus-reactive jewellery; Symbiotic Microcosms: Crafting Digital Interaction (K Vones). This creation aims to bridge the gap between craft practitioner and scientific discovery, proposing a move towards the notion of a post-human body, where wearable design is seen as potential ground for new human-computer interactions, affording the development of visually engaging multifunctional enhancements. In furniture design, Smart Assistive chair for older adults (Chao Zhao) demonstrates how cross-disciplinary knowledge interacting with design strategies provide solution that employed new technological developments in older aged care, and the participation of multiple stakeholders: designers, health care system and community based health systems. In health, Molecular diagnosis system for newborns deafness genetic screening (Chao Zhao) presents an ambitious and complex project that includes a medical device aimed at resolving a number of challenges: technical feasibility for city and rural contexts, compatibility with standard laboratory and hospital systems, access to health system, and support the work of different hospital specialists. The interplay between cross-disciplines is evident in this work, demonstrating how design research moves forward through technology developments. These works exemplify the intersection between domains as a means to innovation. Novel design problems are identified as design intersects with the various areas. Research informs this process, and in different ways. We see the background investigation into the contextualising domain (e.g. on-snow studies, garment recycling, South African health concerns, the post human body) to identify gaps in the area and design criteria; the technologies and materials reviews (e.g. AR, biotextiles) to offer plausible technical means to solve these, as well as design criteria. Theoretical reviews can also inform the design (e.g. play, flow). These work together to equip the design practitioner with a robust set of ‘tools’ for design innovation – tools that are based in research. The process identifies innovative opportunity and criteria for design and this, in turn, provides a means for evaluating the success of the design outcomes. Such an approach has the potential to come full circle between research and design – where the design can function as an exemplar, evidencing how the research-articulated problems can be solved. Core to this, however, is the evaluation of the design outcome itself and identifying knowledge outcomes. In some cases, this is fairly straightforward that is, easily measurable. For example the efficacy of Jason Germany’s helmet can be determined by measuring the reduced response time in the rescuer. Similarly the improved ability to recycle Payne’s panel garments can be clearly determined by comparing it to those recycling processes (and her identified criteria of separating textile elements!); while the sustainability and durability of the Brough & Payne’s biotextile can be assessed by documenting the growth and decay processes, or comparative strength studies. There are however situations where knowledge outcomes and insights are not so easily determined. Many of the works here are open-ended in their nature, as they emphasise the holistic experience of one or more designs, in context: “the end result of the art activity that provides the health benefit or outcome but rather, the value lies in the delivery and experience of the activity” (Bennet et al.) Similarly, reconfiguring layers of laser cut silk in Payne’s Shrinking Violets constitutes a customisable, creative process of clothing oneself since it “could be layered to create multiple visual effects”. Symbiotic Microcosms also has room for facilitating experience, as the work is described to facilitate “serendipitous discovery”. These examples show the diverse emphasis of enquiry as on the experience versus the product. Open-ended experiences are ambiguous, multifaceted and differ from person to person and moment to moment (Eco 1962). Determining the success is not always clear or immediately discernible; it may also not be the most useful question to ask. Rather, research that seeks to understand the nature of the experience afforded by the artefact is most useful in these situations. It can inform the design practitioner by helping them with subsequent re-design as well as potentially being generalizable to other designers and design contexts. Bennett et. al exemplify how this may be approached from a theoretical perspective. This work is concerned with facilitating engaging experiences to educate and, ultimately impact on that community. The research is concerned with the nature of that experience as well, and in order to do so the authors have employed theoretical lenses – here these are of flow, pleasure, play. An alternative or complementary approach to using theory, is using qualitative studies such as interviews with users to ask them about what they experienced? Here the user insights become evidence for generalising across, potentially revealing insight into relevant concerns – such as the range of possible ‘playful’ or experiences that may be afforded, or the situation that preceded a ‘serendipitous discovery’. As shown, IASDR2015 INTERPLAY EXHIBITION provides a platform for exploration, discussion and interrogation around the interplay of design research across diverse domains. We look forward with excitement as IASDR continues to bring research and design together, and as our communities of practitioners continue to push the envelope of what is design and how this can be expanded and better understood with research to foster new work and ultimately, stimulate innovation.

Channelled porous TiO2 synthesized with a water-in-oil microemulsion

Porous titanium dioxide synthesized with a bicontinuous surfactant template is a promising method that leads to a high active surface area electrode. The template used is based on a water/isooctane/dioctyl sodium sulfosuccinate salt together with lecithin. Several parameters were varied during the synthesis to understand and optimize channel formation mechanisms. The material is patterned in stacked conical channels, widening towards the centre of the grains. The active surface area increased by 116% when the concentration of alkoxide precursors was decreased and increased by 241% when the template formation temperature was decreased to 10C. Increasing the oil phase viscosity tends to widen the pore aperture, thus decreasing the overall active surface area. Changing the phase proportions alters the microemulsion integrity and disrupts channel formation.