Innovative and entrepreneurial activity in the public sector : the changing face of public sector institutions

This paper investigates the elements which support innovative and entrepreneurial activity in New Zealand’s state owned enterprises (SOEs). An inductive case study design, involving interview data, textual analysis, and observation, was applied to three SOEs. Findings reveal that those aspects typically associated with entrepreneurship, such as innovation, risk acceptance, pro-activeness and growth, are often supported by a number of unexpected elements within the public sector. These elements include culture, branding, operational excellence, cost efficiency, and knowledge transfer. The implications are twofold. First, that innovative and entrepreneurial activity in the public sector can go beyond policy-making, with SOEs representing an important policy decision and sector of the New Zealand Government. And second, that the impact of several SOEs on international markets suggests competition on the global stage will increasingly come from both public and private sector organizations.

An optimization-based algorithm for shunt active filter under distorted supply voltages

When the supply voltages are balanced and sinusoidal, load compensation can give both unity power factor (UPF) and perfect harmonic cancellation (PHC) source currents. But under distorted supply voltages, achieving both UPF and PHC currents are not possible and contradictory to each other. Hence there should be an optimal performance between these two important compensation goals. This paper presents an optimal control algorithm for load compensation under unbalanced and distorted supply voltages. In this algorithm source currents are compensated for reactive, imbalance components and harmonic distortions set by the limits. By satisfying the harmonic distortion limits and power balance, this algorithm gives the source currents which will provide the maximum achievable power factor. The detailed simulation results using MATLAB are presented to support the performance of the proposed optimal control algorithm.

Bearing damage analysis by calculation of capacitive coupling between inner and outer races of a ball bearing

Bearing damage in modern inverter-fed AC drive systems is more common than in motors working with 50 or 60 Hz power supply. Fast switching transients and common mode voltage generated by a PWM inverter cause unwanted shaft voltage and resultant bearing currents. Parasitic capacitive coupling creates a path to discharge current in rotors and bearings. In order to analyze bearing current discharges and their effect on bearing damage under different conditions, calculation of the capacitive coupling between the outer and inner races is needed. During motor operation, the distances between the balls and races may change the capacitance values. Due to changing of the thickness and spatial distribution of the lubricating grease, this capacitance does not have a constant value and is known to change with speed and load. Thus, the resultant electric field between the races and balls varies with motor speed. The lubricating grease in the ball bearing cannot withstand high voltages and a short circuit through the lubricated grease can occur. At low speeds, because of gravity, balls and shaft voltage may shift down and the system (ball positions and shaft) will be asymmetric. In this study, two different asymmetric cases (asymmetric ball position, asymmetric shaft position) are analyzed and the results are compared with the symmetric case. The objective of this paper is to calculate the capacitive coupling and electric fields between the outer and inner races and the balls at different motor speeds in symmetrical and asymmetrical shaft and balls positions. The analysis is carried out using finite element simulations to determine the conditions which will increase the probability of high rates of bearing failure due to current discharges through the balls and races.

Changing pedagogic codes in a class of landscape architects learning 'ecologically sustainable development'

Professional discourse in education has been the focus of research conducted mostly with teachers and professional practitioners but the work of students in the built environment has largely been ignored. This article presents an analysis of students’ visual discourse in the final professional year of a landscape architecture course in Brisbane, Australia. The study has a multi-method design and includes drawings, interviews and documentary materials, but focuses on the drawings in this paper. Using the theory of Bernstein, the analysis considers student representations as interrelations between professional identity and discretionary space for legitimate knowledge formation in landscape planning. It shows a shift in how students persuade the teacher of their expanding views of this field. The discussion of this shift centres on the professional knowledge that students choose rather than need to learn. It points to the differences within a class that a teacher must address in curriculum design in a contemporary professional course.

Reconciling the supply of and demand for carbon cycle science in the US agricultural sector

When asking the question, ``How can institutions design science policies for the benefit of decision makers?'' Sarewitz and Pielke Sarewitz, D., Pielke Jr., R.A., this issue. The neglected heart of science policy: reconciling supply of and demand for science. Environ. Sci. Policy 10] posit the idea of ``reconciling supply and demand of science'' as a conceptual tool for assessment of science programs. We apply the concept to the U.S. Department of Agriculture's (USDA) carbon cycle science program. By evaluating the information needs of decision makers, or the ``demand'', along with the supply of information by the USDA, we can ascertain where matches between supply and demand exist, and where science policies might miss opportunities. We report the results of contextual mapping and of interviews with scientists at the USDA to evaluate the production and use of current agricultural global change research, which has the stated goal of providing ``optimal benefit'' to decision makers on all levels. We conclude that the USDA possesses formal and informal mechanisms by which scientists evaluate the needs of users, ranging from individual producers to Congress and the President. National-level demands for carbon cycle science evolve as national and international policies are explored. Current carbon cycle science is largely derived from those discussions and thus anticipates the information needs of producers. However, without firm agricultural carbon policies, such information is currently unimportant to producers. (C) 2006 Elsevier Ltd. All rights reserved.

Reconfiguring the higher education value chain

Forces of demand and supply are changing the dynamics of the higher education market. Transformation of institutions of higher learning into competitive enterprise is underway. Higher education institutions are seemingly under intense pressure to create value and focus their efforts and scarce funds on activities that drive up value for their respective customers and other stakeholders. Porter’s generic ‘value chain’ model for creating value requires that the activities of an organization be segregated in to discrete components for value chain analysis to be performed. Recent trends in higher education make such segregation possible. Therefore, it is proposed that the academic process can be unbundled into discrete components which have well developed measures. A reconfigured value chain for higher education, with its own value drivers and critical internal linkages is also proposed in this paper.

A new pulsed power supply topology based on positive buck-boost converters concept

Improving efficiency and flexibility in pulsed power supply technologies is the most substantial concern of pulsed power systems specifically with regard to plasma generation. Recently, the improvement of pulsed power supply has become of greater concern due to the extension of pulsed power applications to environmental and industrial areas. With this respect, a current source based topology is proposed in this paper as a pulsed power supply which gives the possibility of power flow control during load supplying mode. The main contribution in this configuration is utilization of low-medium voltage semiconductor switches for high voltage generation. A number of switch-diode-capacitor units are designated at the output of topology to exchange the current source energy into voltage form and generate a pulsed power with sufficient voltage magnitude and stress. Simulations carried out in Matlab/SIMULINK platform as well as experimental tests on a prototype setup have verified the capability of this topology in performing desired duties. Being efficient and flexible are the main advantages of this topology.

Applications on fault tree analysis in railway power supply systems

Fault tree analysis (FTA) is presented to model the reliability of a railway traction power system in this paper. First, the construction of fault tree is introduced to integrate components in traction power systems into a fault tree; then the binary decision diagram (BDD) method is used to evaluate fault trees qualitatively and quantitatively. The components contributing to the reliability of overall system are identified with their relative importance through sensitivity analysis. Finally, an AC traction power system is evaluated by the proposed methods.

How does small business impact on utilization of industry-led supply chain innovation capacity

This research uses confirmatory factor analysis and structural equation modelling to examine how organizational size - made up of four dimensions - control, resources, trust and complexity - impacts on utilization of industry-led supply chain innovation capacity in a traditional agribusiness industry, the Australian beef industry. It confirms small business rather than larger business accords greater importance to exploiting supply chain dynamic capabilities, particularly in relation to utilizing industry –led supply chain innovation capacity. For small business in Australian beef supply chains, being agile and able to adapt and align their business practices with supply chain partners is integral to ensuring these businesses remain relevant and competitive in this market. In theoretical terms this is supported by authors in the dynamic capabilities literature as they argue these types of capabilities enable organizations to innovate faster (or better), often leading to the creation of newer sources of competitive advantage.

Changing to learner-centred education : challenges experienced by nurse educators in Taiwan

This paper reports the challenges experienced by nurse educators in changing a teacher-centred, content-driven approach to teaching and learning to a learner-centred, process-driven approach within a School of Nursing in Taiwan. While a general movement towards a learner-centred approach was achieved, the curriculum transformation process was complex and inevitably slow with many challenges. First the study is outlined, with the key challenges experienced by the participating nurse educators explicated and illuminated with excerpts drawn from the research data. This is followed by a discussion of possible reasons for the challenges and how they were overcome and the transition process from teacher-centred to learner-centred education facilitated.

Changing perceptions of preservice teachers : innovations in middle schooling teacher education

For the past twenty years, the disengagement of early adolescents has been the focus of much of the literature related to middle schooling. In response, some universities in Australia have introduced teacher education programs that focus upon graduating specialised middle schooling teachers. The aim of this study was to explore and describe the 38 first-year preservice teachers’ perceptions of their first middle schooling elective unit and ascertain whether the combination of university classes and school-based experiences assisted their development of middle schooling concepts and approaches. Data were gathered using pre-test and post-test questionnaires combined with guided written reflections to record their views before, after and during the unit delivery. Results indicated that initially the preservice teachers had little understanding of middle schooling concepts and pedagogical practices, however, 11 participants recognised that bullying and peer pressure were issues experienced by early adolescents. The reflections, which were presented after their field experiences, focused on teaching, learning, behaviour management, and resources and infrastructure. More school-based experiences linked to theoretical underpinnings can help to facilitate understandings about students in the middle phase.

Changing perceptions of preservice teachers : innovations in middle schooling teacher education

For the past twenty years, the disengagement of early adolescents has been the focus of much of the literature related to middle schooling. In response, some universities in Australia have introduced teacher education programs that focus upon graduating specialised middle schooling teachers. Constructing such programs is at the centre of much debate and discussion, however, it is advocated that positive futures for early adolescents can be enhanced through quality middle schooling teacher education programs (Education Queensland, 2004). At a Queensland university campus, middle schooling elective units were introduced as part of the Bachelor of Education (primary) degree. The design of the units was to support preservice teachers to gain the theoretical and pedagogical knowledge to engage and promote early adolescent learning. An innovative approach to the delivery of the units was promoted by a partnership agreement between local schools and the campus. The partnership allowed preservice teachers to combine university classes with opportunities to visit exemplary classrooms to observe, participate and reflect upon middle school teaching practices. The aim of this study was to explore and describe the 38 first-year preservice teachers’ perceptions of their first middle schooling elective unit and to ascertain whether the combination of university classes and school-based experiences assisted their development of middle schooling concepts and approaches. Data were gathered using pre-test and post-test questionnaires combined with guided written reflections to record their views before, after and during the unit delivery. Results indicated that initially 34 preservice teachers had little understanding of middle schooling concepts and pedagogical practices, however, 11 participants recognised that bullying and peer pressure were issues experienced by early adolescents. The collation of the written reflections supported the combined delivery of the middle years unit further supporting the inclusion of school experiences with university delivered units.

Powered two wheelers in a changing world : challenges and opportunities

Powered two wheelers (PTWs) come in diverse forms and are used for a range of purposes in very different parts of the world. In many parts of the world, the forms and uses of PTWs are changing, influenced by social, economic and demographic changes. Most of the challenges associated with PTWs relate to safety, while the majority of the opportunities relate to mobility. The challenges for improving safety relate to the PTW user, other road users, the road environment, the vehicle, data and research, and socio-political dimensions. The relative importance of particular challenges varies between developed and developing countries, and among developing countries according to whether PTWs are largely used for recreation or for transport. PTWs present a range of psychological, transport, economic and environmental opportunities to individuals and societies. The fun and excitement of riding PTWs is a major motivator for their purchase and use for recreational purposes, both off-road and on-road. The transport and economic advantages to the individual also need to be considered. At a societal level, research has examined the potential for increasing PTW volumes to reduce fossil fuel use and traffic congestion in busy cities. The future of PTWs may differ greatly between countries and environmental and technological changes are leading to an evolution in the form of PTWs to encompass new modes of personal transportation.