Personal health records as sources of productivity evidence

Capturing data from various data repositories and integrating them for productivity improvements is common in modern business organisations. With the well-accepted concept of achieving positive gains through investment in employee health and wellness, organisations have started to capture both employee health and non-health data as Employer Sponsored electronic Personal Health Records (ESPHRs). However, non-health related data in ESPHRs has hardly been taken into consideration with outcomes such as employee productivity potentially being suited for further validation and stimulation of ESPHR usage. Here we analyse selected employee demographic information (age, gender, marital status, and job grade) and health-related outcomes (absenteeism and presenteeism) of employees for evidence-based decision making. Our study considered demographic and health-related outcomes of 700 employees. Surprisingly, the analysis shows that employees with high sick leave rates are also high performers. A factor analysis shows 92% of the variance in the data can be explained by three factors, with the job grade capable of explaining 62% of the variance. Work responsibilities may drive employees to maintain high work performance despite signs of sickness, so ESPHRs should focus attention on high performers. This finding suggests new ways of extracting value from ESPHRs to support organisational health and wellness management to help assure sustainability in organisational productivity.

In response: UV–vis light transmittance through tinted contact lenses and the effect of color on values

In the study, we used the Agilent 8453 spectrophotometer (which is equipped with a limiting aperture that restricts the light beam to the central 5 mm of the contact lens), to measure the transmittance of various coloured contact lenses including the one Day Acuvue define manufactured by Johnson and Johnson which the authors represent. We measured the instrument baseline before the transmittance spectra of lenses were tested. The values of lens transmittances were thus the difference between baseline and lens measurement at each time. The transmittance measurements were obtained at 0.5 nm intervals, from 200 to 700 nm after a soak in saline to remove the influence of any surface active agents within the packaging products. The technique used in our study was not very different from how other research studies [2], [3], [4], [5] and [6] have measured the spectra transmittances of contact lenses...

Cost-effectiveness of a national initiative to improve hand hygiene compliance using the outcome of healthcare associated staphylococcus aureus bacteraemia

Background The objective is to estimate the incremental cost-effectiveness of the Australian National Hand Hygiene Inititiave implemented between 2009 and 2012 using healthcare associated Staphylococcus aureus bacteraemia as the outcome. Baseline comparators are the eight existing state and territory hand hygiene programmes. The setting is the Australian public healthcare system and 1,294,656 admissions from the 50 largest Australian hospitals are included. Methods The design is a cost-effectiveness modelling study using a before and after quasi-experimental design. The primary outcome is cost per life year saved from reduced cases of healthcare associated Staphylococcus aureus bacteraemia, with cost estimated by the annual on-going maintenance costs less the costs saved from fewer infections. Data were harvested from existing sources or were collected prospectively and the time horizon for the model was 12 months, 2011–2012. Findings No useable pre-implementation Staphylococcus aureus bacteraemia data were made available from the 11 study hospitals in Victoria or the single hospital in Northern Territory leaving 38 hospitals among six states and territories available for cost-effectiveness analyses. Total annual costs increased by $2,851,475 for a return of 96 years of life giving an incremental cost-effectiveness ratio (ICER) of $29,700 per life year gained. Probabilistic sensitivity analysis revealed a 100% chance the initiative was cost effective in the Australian Capital Territory and Queensland, with ICERs of $1,030 and $8,988 respectively. There was an 81% chance it was cost effective in New South Wales with an ICER of $33,353, a 26% chance for South Australia with an ICER of $64,729 and a 1% chance for Tasmania and Western Australia. The 12 hospitals in Victoria and the Northern Territory incur annual on-going maintenance costs of $1.51M; no information was available to describe cost savings or health benefits. Conclusions The Australian National Hand Hygiene Initiative was cost-effective against an Australian threshold of $42,000 per life year gained. The return on investment varied among the states and territories of Australia.

In vitro demonstration of the heavy-atom effect for photodynamic therapy

Photodynamic therapy (PDT) is an emerging treatment modality for a range of disease classes, both cancerous and noncancerous. This has brought about an active pursuit of new PDT agents that can be optimized for the unique set of photophysical characteristics that are required for a successful clinical agent. We now describe a totally new class of PDT agent, the BF2-chelated 3,5-diaryl-1H-pyrrol-2-yl-3,5-diarylpyrrol-2-ylideneamines (tetraarylazadipyrromethenes). Optimized synthetic procedures have been developed to facilitate the generation of an array of specifically substituted derivatives to demonstrate how control of key therapeutic parameters such as wavelength of maximum absorbance and singlet-oxygen generation can be achieved. Photosensitizer absorption maxima can be varied within the body's therapeutic window between 650 and 700 nm, with high extinction coefficients ranging from 75,000 to 85,000 M(-1) cm(-1). Photosensitizer singlet-oxygen generation level was modulated by the exploitation of the heavy-atom effect. An array of photosensitizers with and without bromine atom substituents gave rise to a series of compounds with varying singlet-oxygen generation profiles. X-ray structural evidence indicates that the substitution of the bromine atoms has not caused a planarity distortion of the photosensitizer. Comparative singlet-oxygen production levels of each photosensitizer versus two standards demonstrated a modulating effect on singlet-oxygen generation depending upon substituent patterns about the photosensitizer. Confocal laser scanning microscopy imaging of 18a in HeLa cervical carcinoma cells proved that the photosensitizer was exclusively localized to the cellular cytoplasm. In vitro light-induced toxicity assays in HeLa cervical carcinoma and MRC5-SV40 transformed fibroblast cancer cell lines confirmed that the heavy-atom effect is viable in a live cellular system and that it can be exploited to modulate assay efficacy. Direct comparison of the efficacy of the photosensitizers 18b and 19b, which only differ in molecular structure by the presence of two bromine atoms, illustrated an increase in efficacy of more than a 1000-fold in both cell lines. All photosensitizers have very low to nondeterminable dark toxicity in our assay system.

Sinteractive anodic powders improve densification and electrochemical properties of BaZr0.8Y0.2O3-δ electrolyte films for anode-supported solid oxide fuel cells

The difficult sintering of BaZr0.8Y0.2O 3-δ (BZY20) powders makes the fabrication of anode-supported BZY20 electrolyte films complex. Dense BZY20 membranes were successfully fabricated on anode substrates made of sinteractive NiO-BZY20 powders, prepared by a combustion method. With respect to traditional anode substrates made of powders prepared by mechanical mixing, the anode substrates made of the wet-chemically synthesized composite NiO-BZY20 powders significantly promoted the densification of BZY20 membranes: dense BZY20 films were obtained after co-pressing and co-firing at 1300 °C, a much lower temperature than those usually needed for densifying BZY20 membranes. Improved electrochemical performance was also observed: the supported BZY20 films maintained a high proton conductivity, up to 5.4 × 10-3 S cm-1 at 700 °C. Moreover, an anode-supported fuel cell with a 30 m thick BZY20 electrolyte film fabricated at 1400 °C on the anode made of the wet-chemically synthesized NiO-BZY20 powder showed a peak power density of 172 mW cm-2 at 700 °C, using La0.6Sr0.4Co 0.2Fe0.8O3-δ-BaZr0.7Y 0.2Pr0.1O3-δ as the cathode material, with a remarkable performance for proton-conducting solid oxide fuel cell (SOFC) applications.

Sinteractivity, proton conductivity and chemical stability of BaZr 0.7In0.3O3-δ for solid oxide fuel cells (SOFCs)

In3+ was used as dopant for BaZrO3 proton conductor and 30 at%-doped BaZrO3 samples (BaZr0.7In 0.3O3-δ, BZI) were prepared as electrolyte materials for proton-conducting solid oxide fuel cells (SOFCs). The BZI material showed a much improved sinteractivity compared with the conventional Y-doped BaZrO 3. The BZI pellets reached almost full density after sintering at 1600 °C for 10 h, whereas the Y-doped BaZrO3 samples still remained porous under the same sintering conditions. The conductivity measurements indicated that BZI pellets showed smaller bulk but improved grain boundary proton conductivity, when compared with Y-doped BaZrO3 samples. A total proton conductivity of 1.7 × 10-3 S cm -1 was obtained for the BZI sample at 700 °C in wet 10% H 2 atmosphere. The BZI electrolyte material also showed adequate chemical stability against CO2 and H2O, which is promising for application in fuel cells.

Investigating the interactions of road users and pedestrians in a dynamic rail level crossing environment

There are 23,500 level crossings in Australia. In these types of environments it is important to understand what human factor issues are present and how road users and pedestrians engage with crossings. A series of on-site observations were performed over a 2-day period at a 3-track active crossing. This was followed by 52 interviews with local business owners and members of the public. Data were captured using a manual-coding scheme for recording and categorising violations. Over 700 separate road user and pedestrian violations were recorded, with representations in multiple categories. Time stamping revealed that the crossing was active for 59% of the time in some morning periods. Further, trains could take up to 4-min to arrive following its first activation. Many pedestrians jaywalked under side rails and around active boom gates. In numerous cases pedestrians put themselves at risk in order to beat or catch the approaching train, ignored signs to stop walking when the lights were flashing. Analysis of interview data identified themes associated with congestion, safety, and violations. This work offers insight into context specific issues associated with active level crossing protection.