Micromarrows—Three-dimensional coculture of hematopoietic stem cells and mesenchymal stromal cells

Hematopoietic stem cell (HSC) transplant is a well established curative therapy for some hematological malignancies. However, achieving adequate supply of HSC from some donor tissues can limit both its application and ultimate efficacy. The theory that this limitation could be overcome by expanding the HSC population before transplantation has motivated numerous laboratories to develop ex vivo expansion processes. Pioneering work in this field utilized stromal cells as support cells in cocultures with HSC to mimic the HSC niche. We hypothesized that through translation of this classic coculture system to a three-dimensional (3D) structure we could better replicate the niche environment and in turn enhance HSC expansion. Herein we describe a novel high-throughput 3D coculture system where murine-derived HSC can be cocultured with mesenchymal stem/stromal cells (MSC) in 3D microaggregates—which we term “micromarrows.” Micromarrows were formed using surface modified microwells and their ability to support HSC expansion was compared to classic two-dimensional (2D) cocultures. While both 2D and 3D systems provide only a modest total cell expansion in the minimally supplemented medium, the micromarrow system supported the expansion of approximately twice as many HSC candidates as the 2D controls. Histology revealed that at day 7, the majority of bound hematopoietic cells reside in the outer layers of the aggregate. Quantitative polymerase chain reaction demonstrates that MSC maintained in 3D aggregates express significantly higher levels of key hematopoietic niche factors relative to their 2D equivalents. Thus, we propose that the micromarrow platform represents a promising first step toward a high-throughput HSC 3D coculture system that may enable in vitro HSC niche recapitulation and subsequent extensive in vitro HSC self-renewal.

Front interactions in a three-component system

The three-component reaction-diffusion system introduced in [C. P. Schenk et al., Phys. Rev. Lett., 78 (1997), pp. 3781–3784] has become a paradigm model in pattern formation. It exhibits a rich variety of dynamics of fronts, pulses, and spots. The front and pulse interactions range in type from weak, in which the localized structures interact only through their exponentially small tails, to strong interactions, in which they annihilate or collide and in which all components are far from equilibrium in the domains between the localized structures. Intermediate to these two extremes sits the semistrong interaction regime, in which the activator component of the front is near equilibrium in the intervals between adjacent fronts but both inhibitor components are far from equilibrium there, and hence their concentration profiles drive the front evolution. In this paper, we focus on dynamically evolving N-front solutions in the semistrong regime. The primary result is use of a renormalization group method to rigorously derive the system of N coupled ODEs that governs the positions of the fronts. The operators associated with the linearization about the N-front solutions have N small eigenvalues, and the N-front solutions may be decomposed into a component in the space spanned by the associated eigenfunctions and a component projected onto the complement of this space. This decomposition is carried out iteratively at a sequence of times. The former projections yield the ODEs for the front positions, while the latter projections are associated with remainders that we show stay small in a suitable norm during each iteration of the renormalization group method. Our results also help extend the application of the renormalization group method from the weak interaction regime for which it was initially developed to the semistrong interaction regime. The second set of results that we present is a detailed analysis of this system of ODEs, providing a classification of the possible front interactions in the cases of $N=1,2,3,4$, as well as how front solutions interact with the stationary pulse solutions studied earlier in [A. Doelman, P. van Heijster, and T. J. Kaper, J. Dynam. Differential Equations, 21 (2009), pp. 73–115; P. van Heijster, A. Doelman, and T. J. Kaper, Phys. D, 237 (2008), pp. 3335–3368]. Moreover, we present some results on the general case of N-front interactions.

Pulse dynamics in a three-component system : stability and bifurcations

In this article, we analyze the stability and the associated bifurcations of several types of pulse solutions in a singularly perturbed three-component reaction-diffusion equation that has its origin as a model for gas discharge dynamics. Due to the richness and complexity of the dynamics generated by this model, it has in recent years become a paradigm model for the study of pulse interactions. A mathematical analysis of pulse interactions is based on detailed information on the existence and stability of isolated pulse solutions. The existence of these isolated pulse solutions is established in previous work. Here, the pulse solutions are studied by an Evans function associated to the linearized stability problem. Evans functions for stability problems in singularly perturbed reaction-diffusion models can be decomposed into a fast and a slow component, and their zeroes can be determined explicitly by the NLEP method. In the context of the present model, we have extended the NLEP method so that it can be applied to multi-pulse and multi-front solutions of singularly perturbed reaction-diffusion equations with more than one slow component. The brunt of this article is devoted to the analysis of the stability characteristics and the bifurcations of the pulse solutions. Our methods enable us to obtain explicit, analytical information on the various types of bifurcations, such as saddle-node bifurcations, Hopf bifurcations in which breathing pulse solutions are created, and bifurcations into travelling pulse solutions, which can be both subcritical and supercritical.

Qualitative study of adversity activated development and resilience in adolescents and young adults with congenital heart disease and their parents

What is it like to have a medical condition that few people have ever heard about? How does it feel to have to question whether daily physical activities are dangerous for you, whilst you watch your friends enjoy those activities without a care? Can you imagine that you need to have a complicated heart surgery, with risks such as paralysis or death? Or even imagine facing the painful recovery period and scars after such a surgery? Then imagine that you are a child or teenager dealing with this medical condition when all your friends are simply occupied with school and normal life. Now consider that surgery has been undertaken to extend your lifespan, but the operation is so new that the long-term outcomes are just not known? All you really know is that you might have ‘surgical repairs’ to your heart and symptoms may be relieved or managed by medications or cardiac devices, but you are never going to be cured. What if you had already experienced painful, frightening, lonely and tedious hospitalisations and you were forced to put your life on hold to re-enter that situation, time and time again. This may be your life, as a Congenital Heart Disease or CHD patient. How do such patients cope and in many cases even thrive? This chapter will review current international literature regarding the medical and personal impact of CHD. Our qualitative study of the perspectives of young CHD patients and their parents contributes to the Australian story of CHD, as well as highlighting the potential for CHD related adversity to promote personal development.

Geographical inquiry in Australian schools : a retrospective analysis

This paper explores the occurrence of geographical inquiry in the Australian curriculum since Geography became a high school subject in 1911. In this historical overview, I reflect upon my own experiences of undertaking geographical inquiry during the 1970’s and 1980’s. Primary school geographical inquiry experiences can be virtually non-existent despite being advocated in syllabus documents. High school geographical inquiry experiences do exist in some classrooms, but that geographic drive is also necessary to complete a meaningful inquiry experience. Although geographical inquiry is heavily advocated in Australia’s new Australian Curriculum: Geography, more work is needed in this area relating to teacher professional learning.

Predictors of sexually transmitted infection in Australian women : evidence from the Australian longitudinal study on women’s health

This longitudinal study examined characteristics of women diagnosed with sexually transmitted infections (STI) for the first time in their later 20s and early 30s. Participants were 6,840 women (born 1973–1978) from the Australian Longitudinal Study on Women’s Health. Women aged 18–23 years were surveyed in 1996 (S1), 2000 (S2), 2003 (S3), and 2006 (S4). There were 269 women reporting an STI for the first time at S3 or S4. Using two multivariable logistic regression analyses (examining 18 predictor variables), these 269 women were compared (1) with 306 women who reported an STI at S2 and (2) with 5,214 women who never reported an STI across the four surveys. Women who reported an STI for the first time at S3 or S4 were less likely to have been pregnant or had a recent Pap smear compared to women reporting an STI at S2.Women reporting a first STI at S3 or S4 were less likely to have been pregnant or had a recent Pap smear compared to women reporting an STI at S2. Women were more likely to report an STI for the first time at S3 or S4 compared to women not reporting an STI at any survey if they were younger, unpartnered, had a higher number of sexual partners, had never been pregnant, were recently divorced or separated, and reported poorer access to Women’s Health or Family Planning Centres at S2. These findings demonstrate the value of longitudinal studies of sexual health over the life course beyond adolescence.

APQL : a process-model query language

As business process management technology matures, organisations acquire more and more business process models. The management of the resulting collections of process models poses real challenges. One of these challenges concerns model retrieval where support should be provided for the formulation and efficient execution of business process model queries. As queries based on only structural information cannot deal with all querying requirements in practice, there should be support for queries that require knowledge of process model semantics. In this paper we formally define a process model query language that is based on semantic relationships between tasks in process models and is independent of any particular process modelling notation.

Social innovation and social enterprise : evidence from Australia

‘Social innovation’ is a construct increasingly used to explain the practices, processes and actors through which sustained positive transformation occurs in the network society (Mulgan, G., Tucker, S., Ali, R., Sander, B. (2007). Social innovation: What it is, why it matters and how can it be accelerated. Oxford:Skoll Centre for Social Entrepreneurship; Phills, J. A., Deiglmeier, K., & Miller, D. T. Stanford Social Innovation Review, 6(4):34–43, 2008.). Social innovation has been defined as a “novel solution to a social problem that is more effective, efficient, sustainable, or just than existing solutions, and for which the value created accrues primarily to society as a whole rather than private individuals.” (Phills,J. A., Deiglmeier, K., & Miller, D. T. Stanford Social Innovation Review, 6 (4):34–43, 2008: 34.) Emergent ideas of social innovation challenge some traditional understandings of the nature and role of the Third Sector, as well as shining a light on those enterprises within the social economy that configure resources in novel ways. In this context, social enterprises – which provide a social or community benefit and trade to fulfil their mission – have attracted considerable policy attention as one source of social innovation within a wider field of action (see Leadbeater, C. (2007). ‘Social enterprise and social innovation: Strategies for the next 10 years’, Cabinet office,Office of the third sector http://www.charlesleadbeater.net/cms xstandard/social_enterprise_innovation.pdf. Last accessed 19/5/2011.). And yet, while social enterprise seems to have gained some symbolic traction in society, there is to date relatively limited evidence of its real world impacts.(Dart, R. Not for Profit Management and Leadership, 14(4):411–424, 2004.) In other words, we do not know much about the social innovation capabilities and effects of social enterprise. In this chapter, we consider the social innovation practices of social enterprise, drawing on Mulgan, G., Tucker, S., Ali, R., Sander, B. (2007). Social innovation: What it is, why it matters and how can it be accelerated. Oxford: Skoll Centre for Social Entrepreneurship: 5) three dimensions of social innovation: new combinations or hybrids of existing elements; cutting across organisational, sectoral and disciplinary boundaries; and leaving behind compelling new relationships. Based on a detailed survey of 365 Australian social enterprises, we examine their self-reported business and mission-related innovations, the ways in which they configure and access resources and the practices through which they diffuse innovation in support of their mission. We then consider how these findings inform our understanding of the social innovation capabilities and effects of social enterprise,and their implications for public policy development.

A Reliability test system for educational purposes-basic results

A set of basic reliability indices at the generation and composite generation and transmission levels for a small reliability test system are presented. The test system and the results presented have evolved from reliability research and teaching programs. The indices presented are for fundamental reliability applications which should be covered in a power system reliability teaching program. The RBTS test system and the basic indices provide a valuable reference for faculty and students engaged in reliability teaching and research

Licensing age issues : deliberations from a workshop devoted to this topic

Objective: To highlight the issues and discuss the research evidence regarding safety, mobility, and other consequences of different licensing ages. Methods: Information included is based on presentations and discussions at a one-day workshop on licensing age issues, and a review and synthesis of the international literature. Results: The literature indicates that higher licensing ages are associated with safety benefits. There is an associated mobility loss, more likely to be an issue in rural states. Legislative attempts to raise the minimum age for independent driving in the United States, e.g., from 16 to 17, have been resisted, although in some states the age has been raised indirectly through graduated driver licensing (GDL) policies. Conclusions: Jurisdictions can achieve reductions in teenage crashes by raising the licensing age. This can be done directly, or indirectly by strengthening GDL systems, in particular extending the minimum length of the learner period.

Bilingual asynchronous online discussion groups : design and delivery of an e-Learning distance study module for nurse academics in a developing country

The advent of eLearning has seen online discussion forums widely used in both undergraduate and postgraduate nursing education. This paper reports an Australian university experience of design, delivery and redevelopment of a distance education module developed for Vietnamese nurse academics. The teaching experience of Vietnamese nurse academics is mixed and frequently limited. It was decided that the distance module should attempt to utilise the experience of senior Vietnamese nurse academics - asynchronous online discussion groups were used to facilitate this. Online discussion occurred in both Vietnamese and English and was moderated by an Australian academic working alongside a Vietnamese translator. This paper will discuss the design of an online learning environment for foreign correspondents, the resources and translation required to maximise the success of asynchronous online discussion groups, as well as the rationale of delivering complex content in a foreign language. While specifically addressing the first iteration of the first distance module designed, this paper will also address subsequent changes made for the second iteration of the module and comment on their success. While a translator is clearly a key component of success, the elements of simplicity and clarity combined with supportive online moderation must not be overlooked.

The search for individualism : Self-expression through product personalisation

This research paper explores the impact product personalisation has upon product attachment and aims to develop a deeper understanding of why, how and if consumers choose to do so. The current research in this field is mainly based on attachment theories and is predominantly product specific. This paper researches the link between product attachment and personalisation through in-depth, semi-structured interviews, where the data has been thematically analysed and broken down into three themes, and nine sub-themes. It was found that participants did become more attached to products once they were personalised and the reasons why this occurred varied. The most common reasons that led to personalisation were functionality and usability, the expression of personality through a product and the complexity of personalisation. The reasons why participants felt connected to their products included strong emotions/memories, the amount of time and effort invested into the personalisation, a sense of achievement. Reasons behind the desire for personalisation included co-designing, expression of uniqueness/individualism and having choice for personalisation. Through theme and inter-theme relationships, many correlations were formed, which created the basis for design recommendations. These recommendations demonstrate how a designer could implement the emotions and reasoning for personalisation into the design process.

From vision to reality : views of primary school principals on inclusive education in New South Wales, Australia

This paper discusses the findings of a research study that used semi-structured interviews to explore the views of primary school principals on inclusive education in New South Wales, Australia. Content analysis of the transcript data indicates that principals’ attitudes towards inclusive education and their success in engineering inclusive practices within their school are significantly affected by their own conception of what “inclusion” means, as well as the characteristics of the school community, and the attitudes and capacity of staff. In what follows, we present two parallel conversations that arose from the interview data to illustrate the main conceptual divisions existing between our participants’ conceptions of inclusion. First, we discuss the act of “being inclusive” which was perceived mainly as an issue of culture and pedagogy. Second, we consider the mechanics of “including,” which reflected a more instrumentalist position based on perceptions of individual student deficit, the level of support they may require and the amount of funding they can attract.

Structural characterisation and environmental application of organoclays for the removal of phenolic compounds

Modified montmorillonite was prepared at different surfactant (HDTMA) loadings through ion exchange. The conformational arrangement of the loaded surfactants within the interlayer space of MMT was obtained by computational modelling. The conformational change of surfactant molecules enhance the visual understanding of the results obtained from characterization methods such as XRD and surface analysis of the organoclays. Batch experiments were carried out for the adsorption of p-chlorophenol (PCP) and different conditions (pH and temperature) were used in order to determine the optimum sorption. For comparison purpose, the experiments were repeated under the same conditions for p-nitrophenol (PNP). Langmuir and Freundlich equations were applied to the adsorption isotherm of PCP and PNP. The Freundlich isotherm model was found to be the best fit for both of the phenolic compounds. This involved multilayer adsorptions in the adsorption process. In particular, the binding affinity value of PNP was higher than that of PCP and this is attributable to their hydrophobicities. The adsorption of the phenolic compounds by organoclays intercalated with highly loaded surfactants was markedly improved possibly due to the fact that the intercalated surfactant molecules within the interlayer space contribute to the partition phases, which result in greater adsorption of the organic pollutants.