Exposure to ambient heat and urolithiasis among outdoor workers in Guangzhou, China

Objectives: To assess the impact of exposure to ambient heat on urolithiasis among outdoor workers in a subtropical city of China. Methods: The 2003–2010 health check data of a shipbuilding company in Guangzhou, China were acquired. 190 cases and 760 matched controls were involved in this study. We assessed the relationship between exposure to ambient heat and urolithiasis for different occupations using conditional logistic regression. Results: Spray painters were most likely to develop urolithiasis (OR = 4.4; 95% CI: 1.7, 11.4), followed by smelter workers (OR = 4.0; 95% CI: 1.8, 9.2), welders (OR = 3.7; 95% CI: 1.9, 7.2), production security and quality inspectors (OR = 2.7; 95% CI: 1.4, 3.0), and assemblers (OR = 2.2; 95% CI: 1.1, 4.3). Overall, outdoor workers were more likely to present with urolithiasis compared with indoor employees (p b 0.05). In addition, workers with longer cumulative exposure time (OR = 1.5; 95% CI: 1.2, 1.8) and abnormal blood pressure (OR = 1.6; 95% CI: 1.0, 2.5) had higher risk for urolithiasis. Conclusions: Our findings demonstrate a significant association between exposure to ambient heat and urolithiasis among outdoor working populations. Public health intervention strategies should be developed to specifically target outdoor occupations.

Monte Carlo simulations of small field output factors in solid phantoms

Introduction Total scatter factor (or output factor) in megavoltage photon dosimetry is a measure of relative dose relating a certain field size to a reference field size. The use of solid phantoms has been well established for output factor measurements, however to date these phantoms have not been tested with small fields. In this work, we evaluate the water equivalency of a number of solid phantoms for small field output factor measurements using the EGSnrc Monte Carlo code. Methods The following small square field sizes were simulated using BEAMnrc: 5, 6, 7, 8, 10 and 30 mm. Each simulated phantom geometry was created in DOSXYZnrc and consisted of a silicon diode (of length and width 1.5 mm and depth 0.5 mm) submersed in the phantom at a depth of 5 g/cm2. The source-to-detector distance was 100 cm for all simulations. The dose was scored in a single voxel at the location of the diode. Interaction probabilities and radiation transport parameters for each material were created using custom PEGS4 files. Results A comparison of the resultant output factors in the solid phantoms, compared to the same factors in a water phantom are shown in Fig. 1. The statistical uncertainty in each point was less than or equal to 0.4 %. The results in Fig. 1 show that the density of the phantoms affected the output factor results, with higher density materials (such as PMMA) resulting in higher output factors. Additionally, it was also calculated that scaling the depth for equivalent path length had negligible effect on the output factor results at these field sizes. Discussion and conclusions Electron stopping power and photon mass energy absorption change minimally with small field size [1]. Also, it can be seen from Fig. 1 that the difference from water decreases with increasing field size. Therefore, the most likely cause for the observed discrepancies in output factors is differing electron disequilibrium as a function of phantom density. When measuring small field output factors in a solid phantom, it is important that the density is very close to that of water.

High temperature reduces apple fruit colour via modulation of the anthocyanin regulatory complex

The biosynthesis of anthocyanin in many plants is affected by environmental conditions. In apple (Malus×domestica Borkh.), concentrations of fruit anthocyanins are lower under hot climatic conditions. We examined the anthocyanin accumulation in the peel of maturing 'Mondial Gala' and 'Royal Gala' apples, grown in both temperate and hot climates, and using artificial heating of on-tree fruit. Heat caused a dramatic reduction of both peel anthocyanin concentration and transcripts of the genes of the anthocyanin biosynthetic pathway. Heating fruit rapidly reduced expression of the R2R3 MYB transcription factor (MYB10) responsible for coordinative regulation for red skin colour, as well as expression of other genes in the transcriptional activation complex. A single night of low temperatures is sufficient to elicit a large increase in transcription of MYB10 and consequently the biosynthetic pathway. Candidate genes that can repress anthocyanin biosynthesis did not appear to be responsible for reductions in anthocyanin content. We propose that temperature-induced regulation of anthocyanin biosynthesis is primarily caused by altered transcript levels of the activating anthocyanin regulatory complex.

Age and gender differences in objectively measured physical activity in youth

Purpose The purpose of this study was to evaluate age and gender differences in objectively measured physical activity (PA) in a population-based sample of students in grades 1–12. Methods Participants (185 male, 190 female) wore a CSA 7164 accelerometer for 7 consecutive days. To examine age-related trends, students were grouped as follows: grades 1–3 (N = 90), grades 4–6 (N = 91), grades 7–9 (N = 96), and grades 10–12 (N = 92). Bouts of PA and minutes spent in moderate-to-vigorous PA (MVPA) and vigorous PA (VPA) were examined. Results Daily MVPA and VPA exhibited a significant inverse relationship with grade level, with the largest differences occurring between grades 1–3 and 4–6. Boys were more active than girls; however, for overall PA, the magnitudes of the gender differences were modest. Participation in continuous 20-min bouts of PA was low to nonexistent. Conclusion Our results support the notion that PA declines rapidly during childhood and adolescence and that accelerometers are feasible alternatives to self-report methods in moderately sized population-level surveillance studies.

Adolescent pedometer protocols : examining reactivity, tampering and participants' perceptions

The aim of this study was to investigate adolescents' potential reactivity and tampering while wearing pedometers by comparing different monitoring protocols to accelerometer output. The sample included adolescents (N=123, age range=14-15 years) from three secondary schools in New South Wales, Australia. Schools were randomised to one of the three pedometer monitoring protocols: (i) daily sealed (DS) pedometer group, (ii) unsealed (US) pedometer group or (iii) weekly sealed (WS) pedometer group. Participants wore pedometers (Yamax Digi-Walker CW700, Yamax Corporation, Kumamoto City, Japan) and accelerometers (Actigraph GT3X+, Pensacola, USA) simultaneously for seven days. Repeated measures analysis of variance was used to examine potential reactivity. Bivariate correlations between step counts and accelerometer output were calculated to explore potential tampering. The correlation between accelerometer output and pedometer steps/day was strongest among participants in the WS group (r=0.82, P <= 0.001), compared to the US (r=0.63, P <= 0.001) and DS (r=0.16, P=0.324) groups. The DS (P <= 0.001) and US (P=0.003), but not the WS (P=0.891), groups showed evidence of reactivity. The results suggest that reactivity and tampering does occur in adolescents and contrary to existing research, pedometer monitoring protocols may influence participant behaviour.

Self-determination, control, and reactions to changes in workload : a work simulation

The objective of this experimental study is to capture the dynamic temporal processes that occur in changing work settings and to test how work control and individuals' motivational predispositions interact to predict reactions to these changes. To this aim, we examine the moderating effects of global self-determined and non-self-determined motivation, at different levels of work control, on participants' adaptation and stress reactivity to changes in workload during four trials of an inbox activity. Workload was increased or decreased at Trial 3, and adaptation to this change was examined via fluctuations in anxiety, coping, motivation, and performance. In support of the hypotheses, results revealed that, for non-self-determined individuals, low work control was stress-buffering and high work control was stress-exacerbating when predicting anxiety and intrinsic motivation. In contrast, for self-determined individuals, high work control facilitated the adaptive use of planning coping in response to a change in workload. Overall, this pattern of results demonstrates that, while high work control was anxiety-provoking and demotivating for non-self-determined individuals, self-determined individuals used high work control to implement an adaptive antecedent-focused emotion regulation strategy (i.e., planning coping) to meet situational demands. Other interactive effects of global motivation emerged on anxiety, active coping, and task performance. These results and their practical implications are discussed.

Wheat breeding nurseries, target environments, and indirect selection for grain yield

Use of appropriate nursery environments will maximize gain from selection for yield of wheat (Triticum aestivum L.) in the target population of environments of a breeding program. The objective of this study was to investigate how well-irrigated (low-stress) nursery environments predict yield of lines in target environments that varied in degree of water limitation. Fifteen lines were sampled from the preliminary yield evaluation stage of the Queensland wheat breeding program and tested in 26 trials under on-farm conditions (Target Environments) across nine years (1985 to 1993) and also in 27 trials conducted at three research stations (Nursery Environments) in three years (1987 to 1989). The nursery environments were structured to impose different levels of water and nitrogen (N) limitation, whereas the target environments represented a random sample of on-farm conditions from the target population of environments. Indirect selection and pattern analysis methods were used to investigate selection for yield in the nursery environments and gain from selection in the target environments. Yield under low-stress nursery conditions was an effective predictor of yield under similar low-stress target environments (r = 0.89, P < 0.01). However, the value of the low-stress nursery as a predictor of yield in the water-limited target environments decreased with increasing water stress (moderate stress r = 0.53, P < 0.05, to r = 0.38, P > 0.05; severe stress r = -0.08, P > 0.05). Yield in the stress nurseries was a poor predictor of yield in the target environments. Until there is a clear understanding of the physiological-genetic basis of variation for adaptation of wheat to the water-limited environments in Queensland, yield improvement can best be achieved by selection for a combination of yield potential in an irrigated low-stress nursery and yield in on-farm trials that sample the range of water-limited environments of the target population of environments.

Enhanced stochastic mobility prediction with multi-output Gaussian processes

Outdoor robots such as planetary rovers must be able to navigate safely and reliably in order to successfully perform missions in remote or hostile environments. Mobility prediction is critical to achieving this goal due to the inherent control uncertainty faced by robots traversing natural terrain. We propose a novel algorithm for stochastic mobility prediction based on multi-output Gaussian process regression. Our algorithm considers the correlation between heading and distance uncertainty and provides a predictive model that can easily be exploited by motion planning algorithms. We evaluate our method experimentally and report results from over 30 trials in a Mars-analogue environment that demonstrate the effectiveness of our method and illustrate the importance of mobility prediction in navigating challenging terrain.

Solar evaporator-collectors : analyses and applications

Taking into consideration of growing energy needs and concern for environmental degradation, clean and inexhaustible energy source, such as solar energy, is receiving greater attention for various applications. The use of solar energy system reduces pollution, waste and has little or no harmful effects on the environment. It is appreciated that this source of energy can be complementary rather than being competitive to conventional energy sources. In order to collect and harness energy from the sun, a solar collector is essential. A solar collector is basically a heat exchanger that transforms solar radiant energy into heat or thermal energy. Improvement of performance is essential for commercial acceptance of their use in such applications. Many studies have been undertaken on the enhancement of thermal performance of solar collectors, using diverse materials of various shapes, dimensions and layouts. In the literature, various collector designs have been proposed and tested with the objective of meeting these requirements [1-8]. Omer et al. [1] found the efficiency of a solar collector of about 70% in a solar assisted heat pump system. Traditional solar collectors are single phase collectors, in which the working fluid is either air or water. Different modifications are suggested and applied to improve the heat transfer between the absorber and working fluid in a collector. These modifications include the use of absorber with fins attached [2,3], corrugated absorber [4,5], matrix type absorber [6], V-groove solar air collector [7]. Karim et al. [8] approached a review of design and construction of three types (flat, vee-grooved, and finned) of air collectors. Two-phase collectors, on the other hand, have significant potential for continuous operation round the clock, when used in conjunction with a compressor, as found in a solar assisted heat-pump cycle.

A fast track SAP R/3 implementation at Guilbert Niceday

This paper examines the approach of Guilbert, a European stationery company, which has chosen a fast track strategy towards implementation of enterprise resource planning.

Visions and values : the Children’s Book Council of Australia’s prizing of picture books in the twenty-first century

The Children’s Book Council of Australia (CBCA) administers the oldest national prize for children’s literature in Australia. Each year, the CBCA confers “Book of the Year” awards to literature for young people in five categories. In 2001, the establishment of an “Early Childhood” category opened up the venerable “Picture Book” category (first awarded in 1955) to books with an implied readership up to 18 years of age. As a result, this category has emerged in recent years as a highly visible space within which the CBCA can contest discourses of cultural marginalisation insofar as Australian (“colonial”) literature is constructed as inferior or adjunct to the major Anglophone literary traditions, and the consistent identification of children’s literature (and, indeed, of children) as lesser than its ‘adult’ counterparts. The CBCA is engaged in defining, evaluating, and legitimising a tradition of Australian children’s literature which is underpinned by a canonical impulse, and is a reflexive practice of self-definition, self-evaluation and self-legitimisation for the CBCA itself. While it is obviously problematic to identify award winners as a canon, it is equally obvious that literary prizing is a cultural practice derived from the logic of canonicity. In his discussion of the United States’s Newbery Medal, Kenneth Kidd notes that “Medal books are instant classics, the selection process an ostensible simulation of the test of time” (169) and that “the Medal is part of the canonical architecture of children's literature” (169). Thus, it is instructive to consider the visions and values of the national, of the social, and of the literary-aesthetic, in the picture books chosen by the Children’s Book Council of Australia (CBCA) as the “best” of the early twenty-first century. These books not only constitute a kind of canon for contemporary Australian children’s literature, but may well come to define what contemporary Australian children’s literature means in the wider literary field. The Book of the Year: Picture Book awards given by the CBCA since 2001 demonstrate that it is not only true of the Booker Prize that, “The choices of winning books reflect not only on the books themselves, then, but also back on the Prize, affecting its reputation and creating journalistic capital which is vital for the Prize to achieve its prominence and impact.” (81). Many of the twenty-first century CBCA award-winning picture books complicate traditional or comfortable understanding of Australianness, children’s literature, or “appropriate” modes of form and content, reminding us that “moments when texts resist or complicate recuperation into national discourses offer fruitful points for exploring the relationships between text and celebratory context” (Roberts 6). The CBCA has taken the opportunities offered by the liberation of the Picture Book category from an implied readership to challenge dominant constructions of children’s literature in Australia, and in so doing, are engaged in overt practices of canonicity with potentially long-lasting effects. Works Cited: Kidd, Kenneth. “Prizing Children’s Literature: The Case of Newbery Gold.” Children's Literature 35 (2007): 166-190. Roberts, Gillian. Prizing Literature: The Celebration and Circulation of National Culture. Toronto: U Toronto P, 2011. Squires, Claire. “Book Marketing and the Booker Prize.” Judging a Book by Its Cover: Fans, Publishers, Designers, and the Marketing of Fiction. Eds. Nicole Matthews and Nickianne Moody. Aldershot: Ashgate, 2007. 71-82.

An analysis of digital storytelling as a documentation tool for research in the creative and performing arts

This paper examines the capacity of digital storytelling to document research activity in the creative and performing arts. In particular, it seeks to identify the thought processes and methods that underpin this research and to capture them using the digital storytelling medium. Interest in this issue was prompted by the author’s work with the creative and performing artists from the Queensland Conservatorium and the Queensland College of Art as part of the Federal government’s Research Quality Framework (RQF) in 2007. The RQF compelled artists to address what it means to undertake research in their disciplines, to describe this, measure it and quantify it; for many practitioners this represents a significant challenge. These issues continue to be pertinent in the context of the Excellence in Research for Australia (ERA) initiative. This research is significant because it seeks to identify, in layman’s terms, the research methods and thought processes used by artists in their research practice. It seeks to do so free of the encumbrances of the professional doctorate policies, the higher education research quality frameworks, and the dense philosophical debates that have to-date dominated discussions of this issue. The research involves qualitative data collection methods including a detailed literature review, interviews with key practitioners and academics involved in the creative and performing arts, and three case studies. The literature review focuses on publications that explore issues of research practice and method in the creative and performing arts. The case studies involve three Queensland-based artists. Digital stories will be developed (and presented) with Marcus and Mafe using their visual materials and drawing on the issues identified in the literature review and interviews. Emmerson’s DVD provided a point of comparison with the digital stories. (Brief bios are attached)