Topological design and modulation strategy for buck-boost three-level inverters

To date, designed topologies for DC-AC inversion with both voltage-buck and boost capabilities are mainly focused on two-level circuitries with extensions to three-level possibilities left nearly unexplored. Contributing to this area of research, this paper presents the design of a number of viable buck-boost three-level inverters that can also support bidirectional power conversion. The proposed front-end circuitry is developed from the Cuk-derived buck-boost two-level inverter, and by using the "alternative phase opposition disposition" (APOD) modulation scheme, the buck-boost three-level inverters can perform distinct five-level line voltage and three-level phase voltage switching by simply controlling the active switches located in the designed voltage boost section of the circuits. As a cost saving option, one active switch can further be removed from the voltage-boost section of the circuits by simply re-routing the gating commands of the remaining switches without influencing the ac output voltage amplitude. To verify the validity of the proposed inverters, Matlab/PLECS simulations were performed before a laboratory prototype was implemented for experimental testing.

Topological design and modulation strategy for buck-boost three-level inverters

To date, designed topologies for DC-AC inversion with both voltage buck and boost capabilities are mainly focused on two-level circuitries with extensions to three-level possibilities left nearly unexplored. Contributing to this area of research, this paper presents the design of a number of viable buck-boost three-level inverters that can also support bidirectional power conversion. The proposed front-end circuitry is developed from the Cuk-derived buck-boost two-level inverter, and by using the ldquoalternative phase opposition dispositionrdquo modulation scheme, the buck-boost three-level inverters can perform distinct five-level line voltage and three-level phase voltage switching by simply controlling the active switches located in the designed voltage boost section of the circuits. As a cost saving option, one active switch can further be removed from the voltage boost section of the circuits by simply rerouting the gating commands of the remaining switches without influencing the AC output voltage amplitude. To verify the validity of the proposed inverters, MATLAB/PLECS simulations were performed before a laboratory prototype was implemented for experimental testing.

Theorizing in design science research : an abstraction layers framework

For Design Science Research (DSR) to gain wide credence as a research paradigm in Information Systems (IS), it must contribute to theory. “Theory cannot be improved until we improve the theorizing process, and we cannot improve the theorizing process until we describe it more explicitly, operate it more self-consciously, and decouple it from validation more deliberately” (Weick 1989, p. 516). With the aim of improved design science theorizing, we propose a DSR abstraction-layers framework that integrates, interlates, and harmonizes key methodological notions, primary of which are: 1) the Design Science (DS), Design Research (DR), and Routine Design (RD) distinction (Winter 2008); 2) Multi Grounding in IS Design Theory (ISDT) (Goldkuhl & Lind 2010); 3) the Idealized Model for Theory Development (IM4TD) (Fischer & Gregor 2011); and 4) the DSR Theorizing Framework (Lee et al. 2011). Though theorizing, or the abstraction process, has been the subject of healthy discussion in DSR, important questions remain. With most attention to date having focused on theorizing for Design Research (DR), a key stimulus of the layered view was the realization that Design Science (DS) produces abstract knowledge at a higher level of generality. The resultant framework includes four abstraction layers: (i) Design Research (DR) 1st Abstract Layer, (ii) Design Science (DS) 2nd Abstract Layer, (iii) DSR Incubation 3rd Layer, and (iv) Routine Design 4th Layer. Differentiating and inter-relating these layers will aid DSR researchers to discover, position, and amplify their DSR contributions. Additionally, consideration of the four layers can trigger creative perspectives that suggest unplanned outputs. The first abstraction layer, including its alternative patterns of activity, is well recognized in the literature. The other layers, however, are less well recognized; and the integrated representation of layers is novel.

Museums as urban catalysts : the role of urban design in flagship cultural development

A long-held urban redevelopment strategy has been the investment in flagship cultural projects—large-scale, iconic museums and arts centres that are intended to enhance the city image while catalyzing private sector investment and attracting tourists to the surrounding area. This paper concentrates on an aspect of the flagship cultural strategy that has received surprisingly little focused attention—the role that urban design and context play in realizing project outcomes. The analysis concentrates on two established flagship museums in Los Angeles and San Jose, California. The research demonstrates that certain urban design characteristics can negatively affect the ability of a project to attract visitors and generate commercial activity. However, at the same time, factors beyond the local context may be an overriding factor in project outcomes thus calling into question the concept of cultural catalyst.

Design guidelines for a mobile app for wellbeing of emerging adults

Mental health of young people may be improved through the use of mental health mobile applications,because young people engage with this technology freely. Mental health of young people is improved through the application of positive psychology, studies of which show that regular practice of one’s signature strength increases happiness and wellbeing, while decreasing depression. The issue is how to develop a mobile application intervention so that regular practice of one’s signature strength in novel ways occurs. This research project seeks to develop design guidelines discovered through the application of design thinking, actively working with emerging adults. In addition, this research is framed by the Design Science Research methodology to ensure that the resultant application is relevant and tested rigorously. This paper discusses the theory behind the application and discusses the research methods and research design, and will share the preliminary findings of the discovered design principles.

Braving a New World : Design Interventions for Changing Climates. Papers from the Subtropical Cities 2013 Fall Conference of the Association of Collegiate Schools of Architecture (ACSA)

We no longer have the luxury of time as the effects of climate change are being felt, according to the latest Intergovernmental Panel on Climate Change report, on every continent and in every ocean. More than 50% of the population of the United States and 85% of Australians live in coastal regions. The number of people living in the world’s coastal regions is expected to increase along with the need to improve capacity to mitigate hazards , and manage the multiple risks that have been identified by the scientific community. Under the auspices of the Association of Collegiate Schools of Architecture (ACSA) design academics and practitioners from the Americas, Asia, and Australia met in Fort Lauderdale, Florida for the fourth Subtropical Cities international conference to share outcomes of research and new pedagogies to address the critical transformation of the physical environments and infrastructures of the world’s vulnerable coastal communities. The theme of Subtropical Cities, adopted by the ACSA for its Fall 2014 Conference, is not confined entirely to a latitudinal or climatic frame of reference. The paper and project presentations addressed a range of theoretical, practice-led, and education-oriented research topics in architecture and urban design related to the subtropics, with emphasis on urban and coastal regions. More than half the papers originate from universities and practices in coastal regions. Threads emerged from a tapestry of localized investigations to reveal a more global understanding about possible futures we are designing for current and future generations. The one hundred-plus conference delegates and presenters represented 33 universities and institutions from across the United States, Mexico, Canada, Australia, the Middle East, Peru and China. Case studies from India, Morocco, Tahiti, Indonesia, Jordan, and Cambodia were also presented, expanding the global knowledge base. Co-authored submissions presented new directions for architecture and design, with a resounding theme of collaboration across diverse disciplines. The ability to deal with abstraction and complexity, and the capacity to develop synthesis and frameworks for defining problem boundaries can be considered key attributes of architectural thinking. Such a unique set of abilities can forge collaboration with different professional disciplines to achieve extraordinary outcomes. As the broad range of papers presented at this conference suggest, existing architectural and urban typologies and practices are increasingly considered part of the cause and not the solution to adapting to climate change and sea level rise. Design responses and the actions needed to generate new and unfamiliar forms of urbanism and infrastructure for defense, adaptation, and retreat in subtropical urban regions are being actively explored in academic design studios and research projects around the world. Many presentations propose provocative and experimental strategies as global climate moves beyond our “comfort zone”. The ideas presented at the Subtropical Cities conference are timely as options for low-energy passive climatic design are becoming increasingly limited in the context of changing climate. At the same time, ways of reducing or obsoleting energy intensive mechanical systems in densely populated urban centres present additional challenges for designers and communities as a whole. The conference was marked by a common theme of trans-disciplinary research, where design integration with emerging technologies resonate with a reaffirmation of the centrality of design thinking, expanding the scope of the traditional architecture studio pedagogy to integrate knowledge from other disciplines and the participation of diverse communities.

Subtropical Cities 2013 ACSA Fall Conference Design Interventions for Changing Climates. Projects

A collection of design projects accepted for exhibition at the 2013 ACSA Fall Conference.

Using enterprise information architecture methods to model wicked problems in information systems design research

Design Science is the process of solving ‘wicked problems’ through designing, developing, instantiating, and evaluating novel solutions (Hevner, March, Park and Ram, 2004). Wicked problems are described as agent finitude in combination with problem complexity and normative constraint (Farrell and Hooker, 2013). In Information Systems Design Science, determining that problems are ‘wicked’ differentiates Design Science research from Solutions Engineering (Winter, 2008) and is a necessary part of proving the relevance to Information Systems Design Science research (Hevner, 2007; Iivari, 2007). Problem complexity is characterised as many problem components with nested, dependent and co-dependent relationships interacting through multiple feedback and feed-forward loops. Farrell and Hooker (2013) specifically state for wicked problems “it will often be impossible to disentangle the consequences of specific actions from those of other co-occurring interactions”. This paper discusses the application of an Enterprise Information Architecture modelling technique to disentangle the wicked problem complexity for one case. It proposes that such a modelling technique can be applied to other wicked problems and can lay the foundations for proving relevancy to DSR, provide solution pathways for artefact development, and aid to substantiate those elements required to produce Design Theory.

Bombs Away: visual thinking and students’ engagement in design studios contexts

In design studio, sketching or visual thinking is part of processes that assist students to achieve final design solutions. At QUT’s First and Third Year industrial design studio classes we engage in a variety of teaching pedagogies from which we identify ‘Concept Bombs’ as an instrumental in the development of students’ visual thinking and reflective design process, and also as a vehicle to foster positive student engagement. Our ‘formula’: Concept Bombs are 20 minute design tasks focusing on rapid development of initial concept designs and free-hand sketching. Our experience and surveys tell us that students value intensive studio activities especially when combined with timely assessment and feedback. While conventional longer-duration design projects are essential for allowing students to engage with the full depth and complexity of the design process, short and intensive design activities introduce variety to the learning experience and enhance student engagement. This paper presents a comparative analysis of First and Third Year students’ Concept Bomb sketches to describe the types of design knowledge embedded in them, a discussion of limitations and opportunities of this pedagogical technique, as well as considerations for future development of studio based tasks of this kind as design pedagogies in the midst of current university education trends.

Using a visually-based assignment to reinforce and assess design history knowledge and understanding

This paper presents a visual timeline-based assignment used in an undergraduate Industrial Design History, Theory and Critcism unit. The assignment was developed in order to find a better way of supporting design history learning than an exam or essay assessment. It was developed using constructive alignment and it allows design students to use their strong visual thinking skills to understand unfamiliar content, develop their visual literacy of design history, and think deeply about the links between the designs, styles, movements, events and people in their timeline. The task produced a variety of responses, from websites and electronic presentations to large paper timelines, scrolls and 3D models. These have been admired by peers and used for end of year shows and permanent displays. Questionnaires were issued to students to gain feedback about the assessment. Students stated that the visual nature of the assignment helped them to understand how different aspects of design history related to each other, assisted with retaining the information, and that it was more interesting and fun than a report or an exam. This paper explores the theories behind and the benefits of using such methods of assessment for design history courses.

A digital airport experience : design-led innovation in support of airport strategy

The digital era is proving to be one of disruption, where new technologies matched with innovative business models can be harnessed to attack even the most established of companies. For businesses with the relative certainty of captive customer bases, such as airports, the ability to digitally diversify offers the opportunity to venture into new modes of operation. For an airport, this opportunity can also be leveraged to sustain superior customer support regardless of a customer’s location in the world. This research paper presents a case study of the development of an Australian Airport Corporation’s mobile application as part of a greater digital strategy initiative using a design-led approach to innovate. An action research method provides the platform for an intensive embedded practice and study of design-led innovation within the major Australian Airport Corporation. The findings reveal design-led innovation to be a crucial in-house idea generation and concept development capability enabling the bridging of distinct corporate domains associated with commercialisation, operations and customer experience. A Digital Innovation Checklist is presented as an output of this research which structures an organizational approach toward digital channel innovation. The practitioner’s checklist is designed to aid in the future development of digital channels within the broader spectrum of strategy by addressing business assumptions.

Design research for the real world : a design-led innovation model for action research

The aim of this paper is to aid researchers in undertaking action research within industry with a particular focus on the study of design-led innovation. This paper presents the research design of a case study shaped to solve real world problems concerning a major Australian Airport Corporation by bridging the chasm between academia and industry. The researcher’s role is one of design-innovation catalyst, facilitating the integration of design as a new strategic capability and innovation approach within an organisation’s fabric. A discussion of the researcher experience within industry will provide evidence on the challenges facing such a research role, with strategies for overcoming these barriers presented. Based on the authors’ experience as a researcher within industry and reflection within practice, a project progression model for action research is presented to enable the improved management of industry based research.

The educational design ladder : creation of a multi-discipline design thinking program

As global industries change and technology advances, traditional education systems may no longer be able to supply companies with graduates possessing an appropriate mix of skills and experience. The recent increased interest in Design Thinking as an approach to innovation has resulted in its adoption by non-design trained professionals. This necessitates a new method of teaching Design Thinking related skills and processes. This research investigates what (content) and how (assessment and learning modes) Design Thinking is being taught from fifty-one (51) selected courses across twenty-eight (28) international universities. Their approaches differ, with some universities specifically investing in design schools and programs, while others embed Design Thinking holistically throughout the university. Business, engineering and design schools are all expanding their efforts to teach students how to innovate, often through multi-disciplinary classes. This paper presents ‘The Educational Design Ladder’ a resource model, which suggests a process for the organisation and structuring of units for a multi-disciplinary Design Thinking program. The intention is to provide 21st century graduates with the right combination of skills and experience to solve workplace design problems regardless of their core discipline.

Design innovation catalyst tools to facilitate organisational change

Organisations have recently looked to design to become more customer oriented and co-create a new kind of value and service offering. This requires changes in the organisation mindset, involving the entire company, innovation processes and often its business model. One tool that has been successful in facilitating this has been Osterwalder and Pigneur (2010) ‘Business Model Canvas’ and more importantly the design process that supports the use of this tool. The aim of this paper is to explore the role design tools play in the translation and facilitation process of innovation in firms. Six ‘Design Innovation Catalysts’ (Wrigley, 2013) were interviewed in regards to their approach and use of design tools in order to better facilitate innovation. Results highlight the value of tools expands beyond their intended use to include; facilitation of communicating, permission to think creatively, and learning and teaching through visualisation. Findings from this research build upon the role of the Design Innovation Catalyst and provide additional implications for organisations.