Mobility and safety are conflicting goals for transport policy makers when making decisions about graduated driver licensing

Policy decisions are frequently influenced by more than research results alone. This review examines one road safety countermeasure, graduated driver licensing, in three jurisdictions and identifies how the conflict between mobility and safety goals can influence policy decisions relating to this countermeasure. Evaluations from around the world of graduated driver licensing have demonstrated clear reductions in crashes for young drivers. However, the introduction of this countermeasure may be affected, both positively and negatively, by the conflict some policy makers experience between ensuring individuals remain both mobile and safe as drivers. This review highlights how this conflict in policy decision making can serve to either facilitate or hinder the introduction of graduated driver licensing systems. However, policy makers whose focus on mobility is too strong when compared with safety may be mistaken, with evidence suggesting that after a graduated driver licensing system is introduced young drivers adapt their behaviour to the new system and remain mobile. As a result, policy makers should consciously acknowledge the conflict between mobility and safety and consider an appropriate balance in order to introduce these systems. Improvements to the licensing system can then be made in an incremental manner as the balance between these two priorities change. Policy makers can achieve an appropriate balance by using empirical evidence as a basis for their decisions.

Doped poly(vinylidene fluoride) as solid polymer electrolyte in nanocrystalline dye-sensitized solar cell

A new solid composite polymer electrolyte was reported by incorporating Azino-bis-(3-ethyl benzo thiazoline-6-sulphonate) ion [ABTS] as dopant in poly(vinylidene flouride) along with redox couple (1-/13-). Under certain conditions, the electrolyte composition forms brush like nano-rods while it is doped with Azino-bis-(3-ethly) benzo thiazoline-6-sulphonate) ion [ABTS], a pi-electron donor. The polymer electrolyte forms nanoscale interpenetrating network with the crystalline order of the polymer electrolyte that seems to be a desirable architecture for the active layer of the photoelectrochemical cell. With this new polymer electrolyte, dye-sensitized solar cell was fabricated using N3 dye absorbed over Ti02- nonoparticles (photoanode) and conducting carbon cement coated on the conducting press (FTO, photocathode). This polymer composite has been successfully used as a promising candidate as solid polymer electrolyte in nanocrystalline dye-sensitized solar cell.

Solid-state nanocrystalline dye-sensitized solar cell using 2-mercapto benzimidazole doped poly(ethylene oxide) as a new polymer electrolyte

New composite doped poly (ethylene oxide) polymer electrolyte was developed using 2-mercapto benzimidazole as plasticizer and iodide/triiodide as redox couple. The fabrication of the cell involves Poly(ethylene oxide)/ 2-mercapto benzimidazole / iodide/triiodide as polymer electrolyte in dye-sensitized solar cell fabricated with N3 dye and TiO2 nanoparticles as the photoanode and Platinum coated FTO (fluorine doped SnO2) as counter electrode. The current-volatage characteristics under simulated sunlight AM1.5 shows a short circuit current Isc of 8.7mA and open circuit photovoltage 508 mV. The conductivity measurements for the new polymer electrolyte and the photoelectrochemical measurments were carried out systematically. In 2-mercapto benzimidazole the electron rich sulphur and nitrogen atoms, act as pi-electron donors that form good interaction with iodine which plays a vital role in the performance of the fabricated dye-sensitized solar cells. The resonance effect increases the stability of the cell to a considerable extent. These results suggest that the new composite polymer electrolyte performs as a promising new doped polymer-electrolyte.

Prison foodservice in Australia : systems, menus and inmate attitudes

This paper presents results from three studies in 25 custodial facilities in three Australian states, including nutrient analyses of menus and focus groups exploring inmate attitudes. Both cook-fresh and cook-chill production systems are used. Non-selective cycle menus of 4-6 weeks are common but inmates can supplement meals by purchase of additional food items (‘buy-ups’). Menus included adequate variety and met most nutritional standards, with the possible exception of fruit. The sodium content of menus is above recommended levels. Protein, fibre, vitamins A, C, thiamin, riboflavin, calcium, iron and zinc were more than adequate, and the percentage energy from fat is close to or meets national recommendations. Focus groups identified 16 themes, including meal quality, food available at ‘buy-ups’, cooking facilities, and concerns about possible food safety risks associated with inmates storing food in cells. Many complaints were about factors not under the control of the foodservice manager.

The effects of sintering profiles on the resistance and flatness of transparent conducting oxide substrates for DSC

The effects of sintering on several properties of FTO and ITO substates used in DSC have been investigated. FTO & ITO substrates were prepared with a range of sizes and aspect ratios - emulated laboratory style test cells through to prototype modules. Time and temperature of the sintering profiles were varied and sheet resistance and flatness measured. Electrical properties of the substrates were then further characterized by electrochemical impedance spectroscopy, and module sized devices were assembled and thickness variations over the device area were determined and related to performance.

Distracted : poetic interpretations of climate change

This paper introduces the creative work Distracted and discusses conceptual, aesthetic and technical aspects of the work. The work was conceived as a luminous, interactive, computational media installation informed by our interest in the Antarctica. Through the paper we focus on: how the work addresses the themes of climate change and sustainability; how we attempted to work with selected sets of scientific data to evoke the delicate yet extreme nature of the environment and the ways in which ice is a record of the earth’s geological history and recent human impacts; and how the process of making this artwork caused us to reconsider our practices and formulate strategies for redirecting our practice in a manner that addresses the challenges of sustainability.

Groundwater Visualisation System (GVS): a software framework for developing low-end, scalable and robust software for 3D visualisation and animation of groundwater conceptual models

Effective management of groundwater requires stakeholders to have a realistic conceptual understanding of the groundwater systems and hydrological processes.However, groundwater data can be complex, confusing and often difficult for people to comprehend..A powerful way to communicate understanding of groundwater processes, complex subsurface geology and their relationships is through the use of visualisation techniques to create 3D conceptual groundwater models. In addition, the ability to animate, interrogate and interact with 3D models can encourage a higher level of understanding than static images alone. While there are increasing numbers of software tools available for developing and visualising groundwater conceptual models, these packages are often very expensive and are not readily accessible to majority people due to complexity. .The Groundwater Visualisation System (GVS) is a software framework that can be used to develop groundwater visualisation tools aimed specifically at non-technical computer users and those who are not groundwater domain experts. A primary aim of GVS is to provide management support for agencies, and enhancecommunity understanding.

Maternal reminiscing style during early childhood predicts the age of adolescents' earliest memories

Individual differences in parental reminiscing style are hypothesized to have long-lasting effects on children’s autobiographical memory development, including the age of their earliest memories. This study represents the first prospective test of this hypothesis. Conversations about past events between 17 mother–child dyads were recorded on multiple occasions between the children’s 2nd and 4th birthdays. When these children were aged 12–13 years, they were interviewed about their early memories. Adolescents whose mothers used a greater ratio of elaborations to repetitions during the early childhood conversations had earlier memories than adolescents whose mothers used a smaller ratio of elaborations to repetitions. This finding is consistent with the hypothesis that past-event conversations during early childhood have long-lasting effects on autobiographical memory.

The call of the road : factors predicting students' car travelling intentions and behaviour

The most common daily trip for employed persons and students is the commute to and from work and/or place of study. Though there are clear environmental, health and safety benefits from using public transport instead of private vehicles for these trips, a high proportion of commuters still choose private vehicles to get to work or study. This study reports an investigation of psychological factors influencing students’ travel choices from the perspective of the Theory of Planned Behaviour (TPB). Students from 3 different university campuses (n= 186) completed a cross-sectional survey on their car commuting behaviour. Particular focus was given to whether car commuting habits could add to understanding of commuting behaviour over and above behavioural intentions. Results indicated that, as expected, behavioural intention to travel by car was the strongest TPB predictor of car commuting behaviour. Further, general car commuting habits explained additional variance over and above TPB constructs, though the contribution was modest. No relationship between habit and intentions was found. Overall results suggest that, although student car commuting behaviour is habitual in nature, it is predominantly guided by reasoned action. Implications of these findings are that in order to alter the use of private vehicles, the factors influencing commuters’ intentions to travel by car must be addressed. Specifically, interventions should target the perceived high levels of both the acceptability of commuting by car and the perceived control over the choice to commute by car.

Hungry 24/7? HCI design for sustainable food culture workshop

This workshop proposes to explore new approaches to cultivate and support sustainable food culture in urban environments via human computer interaction design and ubiquitous technologies. Food is a challenging issue in urban contexts: while food consumption decisions are made many times a day, most food interaction for urbanites occurs based on convenience and habitual practices. This situation is contrasting to the fact that food is at the centre of global environment, health, and social issues that are becoming increasingly immanent and imminent. As such, it is timely and crucial to ask: what are feasible, effective, and innovative ways to improve human-food-interaction through human-computer-interaction in order to contribute to environmental, health, and social sustainability in urban environments? This workshop brings together insights across disciplines to discuss this question, and plan and promote individual, local, and global change for sustainable food culture.

Consumer guarantees in Australia : putting an end to the blame game

The focus of this article is on the proposed consumer guarantees component of the Australian Consumer Law. The Productivity Commission (PC), in its review of Australia’s Consumer Policy Framework, noted that it had not ‘undertaken the detailed analysis necessary to reach a judgment on the adequacy or otherwise of the existing regulation in this area, or the merits of alternative models such as those adopted in countries such as New Zealand’. Accordingly, it recommended that: ‘The adequacy of existing legislation related to implied warranties and conditions should be examined as part of the development of the new national generic consumer law’.

Section 46(1) and 46(1AA) of the TPA : the struggle of the small against the large

The purpose of this article is to highlight the conflict in the policy objectives of subs 46(1) and subs 46(1AA) of the Trade Practices Act 1974 (Cth) (TPA). The policy objective of subs 46(1) is to promote competition and efficient markets for the benefit of consumers (consumer welfare standard). It does not prohibit corporations with substantial market power using cost savings arising from efficiencies such economies of scale or scope, to undercut small business competitors The policy objective of 46(1AA), on the other hand, is to protect small business operators from price discounting by their larger competitors.. Unlike subs 46(1), it does not contain a ‘taking advantage’ element. It is argued that subs 46(1AA) may harm consumer welfare by having a chilling effect on price competition if this would harm small business competitors.

Building an effective trade practices commission : the role of Professor Robert Baxt AO

Bob Baxt, the third Chairman of the Trade Practices Commission, served for a single three year term from 1988 to 1991. He followed Bob McComas, who had deliberately adopted a non-litigious approach to preserving the competitive process, believing that he understood business as an insider and that much of what it did was not anti-competitive, when correctly viewed. Baxt was far more pro-active in his approach, and more closely aligned with that of the first Chairman, Ron Bannerman. Baxt sought to push the frontiers of investigation and precedent, and perhaps, more significantly, sought to influence his Ministers, the government, public servants and public opinion about the need to expand the coverage of the Trade Practices Act, increase penalties and properly resource the Commission so that it could perform its assigned roles. This article examines Baxt’s early and on-going role in teaching Australian students and professionals through his interdisciplinary Trade Practices Workshops, the political context of Baxt’s tenure, including his relations with the Attorney-General ,Michael Duffy, and his skilful handling of the Queensland Wire case.

Automatic solder joint defect classification using the Log-Gabor filter

This paper proposes the validity of a Gabor filter bank for feature extraction of solder joint images on Printed Circuit Boards (PCBs). A distance measure based on the Mahalanobis Cosine metric is also presented for classification of five different types of solder joints. From the experimental results, this methodology achieved high accuracy and a well generalised performance. This can be an effective method to reduce cost and improve quality in the production of PCBs in the manufacturing industry.

Holding cost model for Greenfield Housing developments

Presentation provided to a PhD Colloquium between two Australian and one Malaysian University providing the opportunity to inform and critique progress of students concerning their selected topic. This presentation essentially involves "The conceptualisation, sensitivity and measurement of holding costs and other selected elements impacting housing affordability" as provided by Gary Owen Garner of QUT, with research objectives thus: 1. To establish the nature and composition of holding costs over time, as related to residential property in Australia, and internationally. 2. To examine the linkages that may exist between various planning instruments, the length of regulatory assessment periods, and housing affordability. 3. To develop a model that quantifies the impact of holding costs on housing affordability in Australia, with a particular focus on the consequences of extended assessment periods as a component of holding costs. Thus, provide clarification as to the impact of holding costs on overall housing affordability.