Increase in particle number emissions from motor vehicles due to interruption of steady traffic flow

We assess the increase in particle number emissions from motor vehicles driving at steady speed when forced to stop and accelerate from rest. Considering the example of a signalized pedestrian crossing on a two-way single-lane urban road, we use a complex line source method to calculate the total emissions produced by a specific number and mix of light petrol cars and diesel passenger buses and show that the total emissions during a red light is significantly higher than during the time when the light remains green. Replacing two cars with one bus increased the emissions by over an order of magnitude. Considering these large differences, we conclude that the importance attached to particle number emissions in traffic management policies be reassessed in the future.

Case study of collaborative learning in two contexts : what do English language learners gain?

This chapter describes the use of collaborative learning as an approach to enhance English language learning by students from non-English speaking backgrounds. Communicative Language Teaching (CLT) principles were applied to two case studies, one comprising of undergraduate English as Foreign Language Learners in Turkey and the other involved English as Second Language learners in Australia. Social constructivism inspired communicative language teaching using collaborative learning activities such as team work, interactive peer-based learning, and iterative stages of learning matrix were incorporated to enhance students' learning outcomes. Data collected after the CLT intervention was made up of field notes, reflective logs and focus group interviews which revealed complementarities, as well as subtle differences between the two cases. The findings were summarized as learning dispositions; speaking fluency and confidence; learning diagnostics and completion deficiencies; task engagement, flow theory and higher order thinking skills; in addition to self efficacy and development of student identity. CLT has the potential to provide a more inclusive and dynamic education for diverse learners through vital outcomes and benefits which resonate with the real world.

Integrating hardware and software information flow analyses

Security-critical communications devices must be evaluated to the highest possible standards before they can be deployed. This process includes tracing potential information flow through the device's electronic circuitry, for each of the device's operating modes. Increasingly, however, security functionality is being entrusted to embedded software running on microprocessors within such devices, so new strategies are needed for integrating information flow analyses of embedded program code with hardware analyses. Here we show how standard compiler principles can augment high-integrity security evaluations to allow seamless tracing of information flow through both the hardware and software of embedded systems. This is done by unifying input/output statements in embedded program execution paths with the hardware pins they access, and by associating significant software states with corresponding operating modes of the surrounding electronic circuitry.

How to progress forward in improving safety outcomes in the work-related driving field : a review of work-related driving research and development of an intervention framework [Extended abstract]

Road crashes are now the most common cause of work-related injury, death and absence in a number of countries. Given the impact of workrelated driving crashes on social and economic aspects of business and the community, workrelated road safety and risk management has received increasing attention in recent years. However, limited academic research has progressed on improving safety within the work-related driving sector. The aim of this paper is to present a review of work-related driving safety research to date, and provide an intervention framework for the future development and implementation of workrelated driving safety intervention strategies.

Much ado about mentoring : some learnings from the field

Mentoring has been the focus of both research and writing across a range of professional fields including, for example, education, business, medecine, nursing and law for decades. Even so it has been argued by researchers that much less confusion continues to surround its meaning and understanding. Part of this confusion lies in the fact it has been described in many ways. Some writing in the field focuses on it as a workplace activity for men and womean, a developmental process for novices and leaders alike, a career tool for enhancing promotion, an affirmative action strategy for members of minority groups, and a human resource development strategy used in organisations (Ehrich and Hansford, 1999).

New routes for the field trip

As with the broader field of education research, most writing on the subject of school excursions and field trips has centred around progressive/humanist concerns for building pupil’s self-esteem and for the development of the ‘whole child’. Such research has also stressed the importance of a broad, grounded, and experiential curriculum - as exemplified by subjects containing these extra-school activities - as well as the possibility of strengthening the relationship between student and teacher. Arguing that this approach to the field trip is both exhausted of ideas and conceptually flawed, this paper proposes some alternate routes into the area for the prospective researcher. First, it is argued that by historicising the subject matter, it can be seen that school excursions are not simply the product of the contemporary humanist desire for diverse and fulfilling educational experiences, rather they can, in part, be traced to eighteenth century beliefs among the English gentry that travel formed a crucial component of a good education, to the advent of an affordable public rail system, and to school tours associated with the Temperance movement. Second, field trips can be understood from within the associated framework of concerns over the governance of tourism and the organisation of disciplinary apparatuses for the production of an educated and regulated citizenry. Far from being a simple learning experience, museums and art galleries form part of a complex of disciplinary and power relations designed to produce a populace with very specific capacities, aspirations and styles of public conduct. Finally, rather than allowing children ‘freedom’ from the constraints of the classroom, on the contrary, through the medium of the field-trip, children can become accustomed to having their activities governed in the broader domain of the generalised community . School excursions thereby constitute an effective tactic through which young people have their conduct managed, and their social and scholastic identities shaped and administered.

Using resilience to reconceptualise child protection workforce capacity

Current approaches to managing and supporting staff and addressing turnover in child protection predominantly rely on deficit-based models that focus on limitations, shortcomings, and psychopathology. This article explores an alternative approach, drawing on models of resilience, which is an emerging field linked to trauma and adversity. To date, the concept of resilience has seen limited application to staff and employment issues. In child protection, staff typically face a range of adverse and traumatic experiences that have flow-on implications, creating difficulties for staff recruitment and retention and reduced service quality. This article commences with discussion of the multifactorial influences of the troubled state of contemporary child protection systems on staffing problems. Links between these and difficulties with the predominant deficit models are then considered. The article concludes with a discussion of the relevance and utility of resilience models in developing alternative approaches to child protection staffing issues.

Groundwater flow model of the Logan river alluvial aquifer system Josephville, South East Queensland

The study focuses on an alluvial plain situated within a large meander of the Logan River at Josephville near Beaudesert which supports a factory that processes gelatine. The plant draws water from on site bores, as well as the Logan River, for its production processes and produces approximately 1.5 ML per day (Douglas Partners, 2004) of waste water containing high levels of dissolved ions. At present a series of treatment ponds are used to aerate the waste water reducing the level of organic matter; the water is then used to irrigate grazing land around the site. Within the study the hydrogeology is investigated, a conceptual groundwater model is produced and a numerical groundwater flow model is developed from this. On the site are several bores that access groundwater, plus a network of monitoring bores. Assessment of drilling logs shows the area is formed from a mixture of poorly sorted Quaternary alluvial sediments with a laterally continuous aquifer comprised of coarse sands and fine gravels that is in contact with the river. This aquifer occurs at a depth of between 11 and 15 metres and is overlain by a heterogeneous mixture of silts, sands and clays. The study investigates the degree of interaction between the river and the groundwater within the fluvially derived sediments for reasons of both environmental monitoring and sustainability of the potential local groundwater resource. A conceptual hydrogeological model of the site proposes two hydrostratigraphic units, a basal aquifer of coarse-grained materials overlain by a thick semi-confining unit of finer materials. From this, a two-layer groundwater flow model and hydraulic conductivity distribution was developed based on bore monitoring and rainfall data using MODFLOW (McDonald and Harbaugh, 1988) and PEST (Doherty, 2004) based on GMS 6.5 software (EMSI, 2008). A second model was also considered with the alluvium represented as a single hydrogeological unit. Both models were calibrated to steady state conditions and sensitivity analyses of the parameters has demonstrated that both models are very stable for changes in the range of ± 10% for all parameters and still reasonably stable for changes up to ± 20% with RMS errors in the model always less that 10%. The preferred two-layer model was found to give the more realistic representation of the site, where water level variations and the numerical modeling showed that the basal layer of coarse sands and fine gravels is hydraulically connected to the river and the upper layer comprising a poorly sorted mixture of silt-rich clays and sands of very low permeability limits infiltration from the surface to the lower layer. The paucity of historical data has limited the numerical modelling to a steady state one based on groundwater levels during a drought period and forecasts for varying hydrological conditions (e.g. short term as well as prolonged dry and wet conditions) cannot reasonably be made from such a model. If future modelling is to be undertaken it is necessary to establish a regular program of groundwater monitoring and maintain a long term database of water levels to enable a transient model to be developed at a later stage. This will require a valid monitoring network to be designed with additional bores required for adequate coverage of the hydrogeological conditions at the Josephville site. Further investigations would also be enhanced by undertaking pump testing to investigate hydrogeological properties in the aquifer.

Decentred optical axes and aberrations along principal visual field meridians

Suggestions that peripheral imagery may affect the development of refractive error have led to interest in the variation in refraction and aberration across the visual field. It is shown that, if the optical system of the eye is rotationally symmetric about an optical axis which does not coincide with the visual axis, measurements of refraction and aberration made along the horizontal and vertical meridians of the visual field will show asymmetry about the visual axis. The departures from symmetry are modelled for second-order aberrations, refractive components and third-order coma. These theoretical results are compared with practical measurements from the literature. The experimental data support the concept that departures from symmetry about the visual axis in the measurements of crossed-cylinder astigmatism J45 and J180 are largely explicable in terms of a decentred optical axis. Measurements of the mean sphere M suggest, however, that the retinal curvature must differ in the horizontal and vertical meridians.

Robust video stabilisation algorithm using feature point selection and delta optical flow

In this study, the authors propose a novel video stabilisation algorithm for mobile platforms with moving objects in the scene. The quality of videos obtained from mobile platforms, such as unmanned airborne vehicles, suffers from jitter caused by several factors. In order to remove this undesired jitter, the accurate estimation of global motion is essential. However it is difficult to estimate global motions accurately from mobile platforms due to increased estimation errors and noises. Additionally, large moving objects in the video scenes contribute to the estimation errors. Currently, only very few motion estimation algorithms have been developed for video scenes collected from mobile platforms, and this paper shows that these algorithms fail when there are large moving objects in the scene. In this study, a theoretical proof is provided which demonstrates that the use of delta optical flow can improve the robustness of video stabilisation in the presence of large moving objects in the scene. The authors also propose to use sorted arrays of local motions and the selection of feature points to separate outliers from inliers. The proposed algorithm is tested over six video sequences, collected from one fixed platform, four mobile platforms and one synthetic video, of which three contain large moving objects. Experiments show our proposed algorithm performs well to all these video sequences.

Introduction : the global flow of creative ideas

In the era of late modernism, various pressures play a decisive role in shaping the texture and meaning of the world around us. Population, work, transportation, new technologies of information and communication, lifestyle cultures and other forces are increasingly mobile, and this in turn helps make for a new set of public and personal surroundings. Social life everywhere now appears to share more and more in an international (if not a global) order, even if inequality and stratification remain common inside territories and across territories. Still, the perception is that a particular cultural life is increasingly universal. More and more consumers come to share in its practices and products, with those products becoming more and more homogeneous. This standardization argument finds much support in the apparent internationalization of many elements of media, entertainment, leisure and lifestyle cultures, with cultural conglomerates determined to maximize their global market reach. Once upon a time, in order to understand the economic, political and cultural forces affecting citizens and society, it was mostly deemed sufficient to look within the boundaries of the nation-state. Over the past two decades, these same pressures of globalization have impacted on critical research, highlighting the methodological need to adopt an optic that is more cross-border and transcultural as a means of gaining greater understanding of cultural life.

Printmaking as an expanding field in contemporary art practice : a case study of Japan, Australia and Thailand

This thesis proposes that contemporary printmaking, at its most significant, marks the present through reconstructing pasts and anticipating futures. It argues this through examples in the field, occurring in contexts beyond the Euramerican (Europe and North America). The arguments revolve around how the practice of a number of significant artists in Japan, Australia and Thailand has generated conceptual and formal innovations in printmaking that transcend local histories and conventions, whilst paradoxically, also building upon them and creating new meanings. The arguments do not portray the relations between contemporary and traditional art as necessarily antagonistic but rather, as productively dialectical. Furthermore, the case studies demonstrate that, in the 1980s and 1990s particularly, the studio practice of these printmakers was informed by other visual arts disciplines and reflected postmodern concerns. Departures from convention witnessed in these countries within the Asia-Pacific region shifted the field of the print into a heterogeneous and hybrid realm. The practitioners concerned (especially in Thailand) produced work that was more readily equated with performance and installation art than with printmaking per se. In Japan, the incursion of photography interrupted the decorative cast of printmaking and delivered it from a straightforward, craft-based aesthetic. In Australia, fixed notions of national identity were challenged by print practitioners through deliberate cultural rapprochements and technical contradictions (speaking across old and new languages).However time-honoured print methods were not jettisoned by any case study artists. Their re-alignment of the fundamental attributes of printmaking, in line with materialist formalism, is a core consideration of my arguments. The artists selected for in-depth analysis from these three countries are all innovators whose geographical circumstances and creative praxis drew on local traditions whilst absorbing international trends. In their radical revisionism, they acknowledged the specificity of history and place, conditions of contingency and forces of globalisation. The transformational nature of their work during the late twentieth century connects it to the postmodern ethos and to a broader artistic and cultural nexus than has hitherto been recognised in literature on the print. Emerging from former guild-based practices, they ambitiously conceived their work to be part of a continually evolving visual arts vocabulary. I argue in this thesis that artists from the Asia-Pacific region have historically broken with the hermetic and Euramerican focus that has generally characterised the field. Inadequate documentation and access to print activity outside the dominant centres of critical discourse imply that readings of postmodernism have been too limited in their scope of inquiry. Other locations offer complexities of artistic practice where re-alignments of customary boundaries are often the norm. By addressing innovative activity in Japan, Australia and Thailand, this thesis exposes the need for a more inclusive theoretical framework and wider global reach than currently exists for ‘printmaking’.