QGECE research on delineation of Australian geothermal resources

The geology/reservoir program of the Queensland Geothermal Energy Centre of Excellence (QGECE) has the mission to improve the existing knowledge and develop new innovative scientific approaches for the identification of geothermal resources in Australia, with a particular focus on Queensland. Specifically, the QGECE geology/reservoir program is currently (1) producing a comprehensive geochemical dataset for high heat producing rocks, (2) conducting detailed mineralogical and geochronological studies of granites and hydrothermal alteration minerals, and ; (3) investigating the Cooper Basin representing a superb natural laboratory for understanding of radiogenic heat enrichment process and possible involvement of mantle heat flow. Seven research projects have been established, which are being conducted largely as PhD studies. In the preliminary studies, high quality and valuable results were obtained to address the research topics of understanding the causes and timing of heat producing element enrichment.

Adaptive dynamic path re-planning RRT algorithms with game theory for UAVs

The main aim of this paper is to describe an adaptive re-planning algorithm based on a RRT and Game Theory to produce an efficient collision free obstacle adaptive Mission Path Planner for Search and Rescue (SAR) missions. This will provide UAV autopilots and flight computers with the capability to autonomously avoid static obstacles and No Fly Zones (NFZs) through dynamic adaptive path replanning. The methods and algorithms produce optimal collision free paths and can be integrated on a decision aid tool and UAV autopilots.

Design, simulation and analysis of a parallel hybrid electric propulsion system for unmanned aerial vehicles

Aerial Vehicles (UAV) has become a significant growing segment of the global aviation industry. These vehicles are developed with the intention of operating in regions where the presence of onboard human pilots is either too risky or unnecessary. Their popularity with both the military and civilian sectors have seen the use of UAVs in a diverse range of applications, from reconnaissance and surveillance tasks for the military, to civilian uses such as aid relief and monitoring tasks. Efficient energy utilisation on an UAV is essential to its functioning, often to achieve the operational goals of range, endurance and other specific mission requirements. Due to the limitations of the space available and the mass budget on the UAV, it is often a delicate balance between the onboard energy available (i.e. fuel) and achieving the operational goals. This paper presents the development of a parallel Hybrid Electric Propulsion System (HEPS) on a small fixed-wing UAV incorporating an Ideal Operating Line (IOL) control strategy. A simulation model of an UAV was developed in the MATLAB Simulink environment, utilising the AeroSim Blockset and the in-built Aerosonde UAV block and its parameters. An IOL analysis of an Aerosonde engine was performed, and the most efficient (i.e. provides greatest torque output at the least fuel consumption) points of operation for this engine were determined. Simulation models of the components in a HEPS were designed and constructed in the MATLAB Simulink environment. It was demonstrated through simulation that an UAV with the current HEPS configuration was capable of achieving a fuel saving of 6.5%, compared to the ICE-only configuration. These components form the basis for the development of a complete simulation model of a Hybrid-Electric UAV (HEUAV).

Multidisciplinary design and flight testing of a remote gas/particle airborne sensor system

The main objective of this paper is to describe the development of a remote sensing airborne air sampling system for Unmanned Aerial Systems (UAS) and provide the capability for the detection of particle and gas concentrations in real time over remote locations. The design of the air sampling methodology started by defining system architecture, and then by selecting and integrating each subsystem. A multifunctional air sampling instrument, with capability for simultaneous measurement of particle and gas concentrations was modified and integrated with ARCAA’s Flamingo UAS platform and communications protocols. As result of the integration process, a system capable of both real time geo-location monitoring and indexed-link sampling was obtained. Wind tunnel tests were conducted in order to evaluate the performance of the air sampling instrument in controlled nonstationary conditions at the typical operational velocities of the UAS platform. Once the remote fully operative air sampling system was obtained, the problem of mission design was analyzed through the simulation of different scenarios. Furthermore, flight tests of the complete air sampling system were then conducted to check the dynamic characteristics of the UAS with the air sampling system and to prove its capability to perform an air sampling mission following a specific flight path.

Sensors for missions

An onboard payload may be seen in most instances as the “Raison d’Etre” for a UAV. It will define its capabilities, usability and hence market value. Large and medium UAV payloads exhibit significant differences in size and computing capability when compared with small UAVs. The latter have stringent size, weight, and power requirements, typically referred as SWaP, while the former still exhibit endless appetite for compute capability. The tendency for this type of UAVs (Global Hawk, Hunter, Fire Scout, etc.) is to increase payload density and hence processing capability. An example of this approach is the Northrop Grumman MQ-8 Fire Scout helicopter, which has a modular payload architecture that incorporates off-the-shelf components. Regardless of the UAV size and capabilities, advances in miniaturization of electronics are enabling the replacement of multiprocessing, power-hungry general-purpose processors for more integrated and compact electronics (e.g., FPGAs). Payloads play a significant role in the quality of ISR (intelligent, surveillance, and reconnaissance) data, and also in how quick that information can be delivered to the end user. At a high level, payloads are important enablers of greater mission autonomy, which is the ultimate aim in every UAV. This section describes common payload sensors and introduces two examples cases in which onboard payloads were used to solve real-world problems. A collision avoidance payload based on electro optical (EO) sensors is first introduced, followed by a remote sensing application for power line inspection and vegetation management.

Social enterprises in rural community development

Social enterprises are hybrid organizational forms that combine characteristics of for-profit businesses and community sector organizations. This article explores how rural communities may use social enterprises to progress local development agendas across both economic and social domains. Drawing on qualitative case studies of three social enterprises in rural North West Tasmania, this article explores the role of social enterprises in local development processes. The case study social enterprises, despite differences in size, structure, mission and age, are strongly embedded in their local places and local communities. As deeply contextualized development actors, these social enterprises mobilize multiple resources and assets to achieve a range of local development outcomes, including but not limited to social capital

The stitchery collective position paper

This paper introduces ‘the stitchery collective’ – a fashion based artist-run-initiative. First the paper overviews the collective’s broad mission (to use fashion for good) and outlines its operational status. It closes with a brief reflection on how ‘the stitchery collective’ can be seen to contribute to, or align with, the field known as with social innovation.

Weaving the past into the present : Indigenous stories of education across generations

In Queensland, there is little research that speaks to the historical experiences of schooling. Aboriginal education remains a part of the silenced history of Aboriginal people. This thesis presents stories of schooling from Aboriginal people across three generations of adult storytellers. Elders, grandparents, and young parents involved in an early childhood urban playgroup were included. Stories from the children attending the playgroup were also welcomed. The research methodology involved narrative storywork. This is culturally appropriate because Aboriginal stories connect the past with the present. The conceptual framework for the research draws on decolonising theory. Typically, reports of Aboriginal schooling and outcomes position Aboriginal families and children within a deficit discourse. The issues and challenges faced by urban Murri families who have young children or children in school are largely unknown. This research allowed Aboriginal families to participate in an engaged dialogue about their childhood and offered opportunities to tell their stories of education. Key research questions were: What was the reality of school for different generations of Indigenous people? What beliefs and values are held about mainstream education for Indigenous children? What ideas are communicated about school across generations? Narratives from five elders, five grandparents, and five (urban) mothers of young Indigenous children are presented. The elders offer testimony on their recollected experiences of schooling in a mission, a Yumba school (fringe-dwellers’ camp), and country schools. Their stories also speak to the need to pass as non-indigenous and act as “white”. The next generation of storytellers are the grandparents and they speak to their lives as “stolen children”. The final story tellers are the Murri parents. They speak to the current and recent past of education, as well as their family experiences as they parent young children who are about to enter school or who are in the early years of school.

ICT shared services in the higher education sector : foundations, benefits, success factors and issues

Universities are more and more challenged by the emerging global higher education market, facilitated by advances in Information and Communication Technologies (ICT). This requires them to reconsider their mission and direction in order to function effectively and efficiently, and to be responsive to changes in their environment. In the face of increasing demands and competitive pressures, Universities like other companies, seek to continuously innovate and improve their performance. Universities are considering co-operating or sharing, both internally and externally, in a wide range of areas to achieve cost effectiveness and improvements in performance. Shared services are an effective model for re-organizing to reduce costs, increase quality and create new capabilities. Shared services are not limited to the Higher Education (HE) sector. Organizations across different sectors are adopting shared services, in particular for support functions such as Finance, Accounting, Human Resources and Information Technology. While shared services has been around for more than three decades, commencing in the 1970’s in the banking sector and then been adopted by other sectors, it is an under researched domain, with little consensus on the most fundamental issues even as basic as defining what shared services is. Moreover, the interest in shared services within Higher Education is a global phenomenon. This study on shared services is situated within the Higher Education Sector of Malaysia, and originated as an outcome resulting from a national project (2005 – 2007) conducted by the Ministry of Higher Education (MOHE) entitled "Knowledge, Information Communication Technology Strategic Plan (KICTSP) for Malaysian Public Higher Education"- where progress towards more collaborations via shared services was a key recommendation. The study’s primary objective was to understand the nature and potential for ICT shared services, in particular in the Malaysian HE sector; by laying a foundation in terms of definition, typologies and research agenda and deriving theoretically based conceptualisations of the potential benefits of shared services, success factors and issues of pursuing shared services. The study embarked on this objective with a literature review and pilot case study as a means to further define the context of the study, given the current under-researched status of ICT shared services and of shared services in Higher Education. This context definition phase illustrated a range of unaddressed issues; including a lack of common understanding of what shared services are, how they are formed, what objectives they full fill, who is involved etc. The study thus embarked on a further investigation of a more foundational nature with an exploratory phase that aimed to address these gaps, where a detailed archival analysis of shared services literature within the IS context was conducted to better understand shared services from an IS perspective. The IS literature on shared services was analysed in depth to report on the current status of shared services research in the IS domain; in particular definitions, objectives, stakeholders, the notion of sharing, theories used, and research methods applied were analysed, which provided a firmer base to this study’s design. The study also conducted a detailed content analysis of 36 cases (globally) of shared services implementations in the HE sector to better understand how shared services are structured within the HE sector and what is been shared. The results of the context definition phase and exploratory phase formed a firm basis in the multiple case studies phase which was designed to address the primary goals of this study (as presented above). Three case sites within the Malaysian HE sector was included in this analysis, resulting in empirically supported theoretical conceptualizations of shared services success factors, issues and benefits. A range of contributions are made through this study. First, the detailed archival analysis of shared services in Information Systems (IS) demonstrated the dearth of research on shared services within Information Systems. While the existing literature was synthesised to contribute towards an improved understanding of shared services in the IS domain, the areas that are yet under-developed and requires further exploration is identified and presented as a proposed research agenda for the field. This study also provides theoretical considerations and methodological guidelines to support the research agenda; to conduct better empirical research in this domain. A number of literatures based a priori frameworks (i.e. on the forms of sharing and shared services stakeholders etc) are derived in this phase, contributing to practice and research with early conceptualisations of critical aspects of shared services. Furthermore, the comprehensive archival analysis design presented and executed here is an exemplary approach of a systematic, pre-defined and tool-supported method to extract, analyse and report literature, and is documented as guidelines that can be applied for other similar literature analysis, with particular attention to supporting novice researchers. Second, the content analysis of 36 shared services initiatives in the Higher Education sector presented eight different types of structural arrangements for shared services, as observed in practice, and the salient dimensions along which those types can be usefully differentiated. Each of the eight structural arrangement types are defined and demonstrated through case examples, with further descriptive details and insights to what is shared and how the sharing occurs. This typology, grounded on secondary empirical evidence, can serve as a useful analytical tool for researchers investigating the shared services phenomenon further, and for practitioners considering the introduction or further development of shared services. Finally, the multiple case studies conducted in the Malaysian Higher Education sector, provided further empirical basis to instantiate the conceptual frameworks and typology derived from the prior phases and develops an empirically supported: (i) framework of issues and challenges, (ii) a preliminary theory of shared services success, and (iii) a benefits framework, for shared services in the Higher Education sector.

Design, modelling and measurement of hybrid powerplant for unmanned aerial vehicles (UAVs)

The success or effectiveness for any aircraft design is a function of many trade-offs. Over the last 100 years of aircraft design these trade-offs have been optimized and dominant aircraft design philosophies have emerged. Pilotless aircraft (or uninhabited airborne systems, UAS) present new challenges in the optimization of their configuration. Recent developments in battery and motor technology have seen an upsurge in the utility and performance of electric powered aircraft. Thus, the opportunity to explore hybrid-electric aircraft powerplant configurations is compelling. This thesis considers the design of such a configuration from an overall propulsive, and energy efficiency perspective. A prototype system was constructed using a representative small UAS internal combustion engine (10cc methanol two-stroke) and a 600W brushless Direct current (BLDC) motor. These components were chosen to be representative of those that would be found on typical small UAS. The system was tested on a dynamometer in a wind-tunnel and the results show an improvement in overall propulsive efficiency of 17% when compared to a non-hybrid powerplant. In this case, the improvement results from the utilization of a larger propeller that the hybrid solution allows, which shows that general efficiency improvements are possible using hybrid configurations for aircraft propulsion. Additionally this approach provides new improvements in operational and mission flexibility (such as the provision of self-starting) which are outlined in the thesis. Specifically, the opportunity to use the windmilling propeller for energy regeneration was explored. It was found (in the prototype configuration) that significant power (60W) is recoverable in a steep dive, and although the efficiency of regeneration is low, the capability can allow several options for improved mission viability. The thesis concludes with the general statement that a hybrid powerplant improves the overall mission effectiveness and propulsive efficiency of small UAS.

Targeted control of feral pigs in far north Queensland : defining management units using molecular techniques

The feral pig, Sus scrofa, is a widespread and abundant invasive species in Australia. Feral pigs pose a significant threat to the environment, agricultural industry, and human health, and in far north Queensland they endanger World Heritage values of the Wet Tropics. Historical records document the first introduction of domestic pigs into Australia via European settlers in 1788 and subsequent introductions from Asia from 1827 onwards. Since this time, domestic pigs have been accidentally and deliberately released into the wild and significant feral pig populations have become established, resulting in the declaration of this species as a class 2 pest in Queensland. The overall objective of this study was to assess the population genetic structure of feral pigs in far north Queensland, in particular to enable delineation of demographically independent management units. The identification of ecologically meaningful management units using molecular techniques can assist in targeting feral pig control to bring about effective long-term management. Molecular genetic analysis was undertaken on 434 feral pigs from 35 localities between Tully and Innisfail. Seven polymorphic and unlinked microsatellite loci were screened and fixation indices (FST and analogues) and Bayesian clustering methods were used to identify population structure and management units in the study area. Sequencing of the hyper-variable mitochondrial control region (D-loop) of 35 feral pigs was also examined to identify pig ancestry. Three management units were identified in the study at a scale of 25 to 35 km. Even with the strong pattern of genetic structure identified in the study area, some evidence of long distance dispersal and/or translocation was found as a small number of individuals exhibited ancestry from a management unit outside of which they were sampled. Overall, gene flow in the study area was found to be influenced by environmental features such as topography and land use, but no distinct or obvious natural or anthropogenic geographic barriers were identified. Furthermore, strong evidence was found for non-random mating between pigs of European and Asian breeds indicating that feral pig ancestry influences their population genetic structure. Phylogenetic analysis revealed two distinct mitochondrial DNA clades, representing Asian domestic pig breeds and European breeds. A significant finding was that pigs of Asian origin living in Innisfail and south Tully were not mating randomly with European breed pigs populating the nearby Mission Beach area. Feral pig control should be implemented in each of the management units identified in this study. The control should be coordinated across properties within each management unit to prevent re-colonisation from adjacent localities. The adjacent rainforest and National Park Estates, as well as the rainforest-crop boundary should be included in a simultaneous control operation for greater success.

Controlling buoyancy-driven profiling floats for applications in ocean observation

Establishing a persistent presence in the ocean with an autonomous underwater vehicle (AUV) capable of observing temporal variability of large-scale ocean processes requires a unique sensor platform. In this paper, we examine the utility of vehicles that can only control their depth in the water column for such extended deployments. We present a strategy that utilizes ocean model predictions to facilitate a basic level of autonomy and enables general control for these profiling floats. The proposed method is based on experimentally validated techniques for utilizing ocean current models to control autonomous gliders. With the appropriate vertical actuation, and utilizing spatio–temporal variations in water speed and direction, we show that general controllability results can be met. First, we apply an A* planner to a local controllability map generated from predictions of ocean currents. This computes a path between start and goal waypoints that has the highest likelihood of successful execution. A computed depth plan is generated with a model-predictive controller (MPC), and selects the depths for the vehicle so that ambient currents guide it toward the goal. Mission constraints are included to simulate and motivate a practical data collection mission. Results are presented in simulation for a mission off the coast of Los Angeles, CA, USA, that show encouraging results in the ability of a drifting vehicle to reach a desired location.

Proceedings of the 6th Knowledge Cities World Summit, KCWS 2013

In recent years, with the impact of global knowledge economy, a more comprehensive development approach has gained significant popularity. This new development approach, so called ‘knowledge-based urban development’, is different from its traditional predecessor. With a much more balanced focus on all of the four key development domains – economic, spatial, institutional, and socio-cultural – this contemporary approach, aims to bring economic prosperity, environmental sustainability and local institutional competence with a just socio-spatial order to our cities and regions. The ultimate goal of knowledgebased urban development is to produce a city purposefully designed to encourage the continuous production, circulation and commercialization of social and scientific knowledge – this will in turn establish a ‘knowledge city’. A city following the ‘knowledge city’ concept embarks on a strategic mission to firmly encourage and nurture locally focused innovation, science and creativity within the context of an expanding knowledge economy and society. In this regard a ‘knowledge city’ can be seen as an integrated city, which physically and institutionally combines the functions of a science and technology park with civic and residential functions and urban amenities. It also offers one of the effective paradigms for the sustainable cities of our time. This sixth edition of KCWS – The 6th Knowledge Cities World Summit 2013 – makes an important reminder that the ‘knowledge city’ concept is a key notion in the 21st Century development. Considering this notion, the Summit sheds light on the multifaceted dimensions and various scales of building a ‘knowledge city’ via ‘knowledge-based urban development’ paradigm by particularly focusing on the overall Summit theme of ‘Establishing Bridges’. At this summit, the theoretical and practical maturing of knowledge-based development paradigms are advanced through the interplay between the world’s leading academics’ theories and the practical models and strategies of practitioners’ and policy makers’ drawn from around the world. This summit proceeding is compiled in order to disseminate the knowledge generated and shared in KCWS 2013 with the wider research, governance, and practice communities the knowledge co-created in this summit. All papers of this proceeding have gone through a double-blind peer review process and been reviewed by our summit editorial review and advisory board members. We, organizers of the summit, cordially thank the members of the Summit Proceeding Editorial Review and Advisory Board for their diligent work in the review of the papers. Also we thank Prof.Dr. Ahmet Ademoğlu, Rector of İstanbul Şehir University, for providing all the support for the Summit. We hope the papers in this proceeding will inspire and make a significant contribution to the research, governance, and practice circles.

Accounting for volunteer services : a deficiency in accountability

The purpose of this study is to identify the extent to which NFP organisations disclose information on volunteer contributions of services. Design/methodology/approach – The study relies on information disclosed in the websites of NFP organisations. Findings - We find that disclosure was more prevalent on NFP websites compared to digital annual report disclosures. We find that more NFPs provided disclosure on the activities of their volunteers than other items pertaining to volunteers and the quantification and valuation of volunteer contributions were the least likely to be disclosed. Importantly, the findings illustrate an accountability deficiency in the comprehensiveness of disclosure which results in an under-representation of the contribution volunteers provide to organisational sustainability and impact on mission fulfilment. Research limitations/implications – The convenience sample size restricts further interrogation to tease out organisational characteristics that may influence current disclosure practices. Practical implications - The findings contribute to international debate over the inclusion of volunteer contributions in the assessment of a NFP’s accountability over its resources and ultimately the enhancement of its sustainability.

A cross-discipline and collaborative approach to identifying the predictors of environmentally friendly and health protective behaviour

Background. As a society, our interaction with the environment is having a negative impact on human health. For example, an increase in car use for short trips, over walking or cycling, has contributed to an increase in obesity, diabetes and poor heart health and also contributes to pollution, which is associated with asthma and other respiratory diseases. In order to change the nature of that interaction, to be more positive and healthy, it is recommended that individuals adopt a range of environmentally friendly behaviours (such as walking for transport and reducing the use of plastics). Effective interventions aimed at increasing such behaviours will need to be evidence based and there is a need for the rapid communication of information from the point of research, into policy and practice. Further, a number of health disciplines, including psychology and public health, share a common mission to promote health and well-being. Therefore, the objective of this project is to take a cross-discipline and collaborative approach to reveal psychological mechanisms driving environmentally friendly behaviour. This objective is further divided into three broad aims, the first of which is to take a cross-discipline and collaborative approach to research. The second aim is to explore and identify the salient beliefs which most strongly predict environmentally friendly behaviour. The third aim is to build an augmented model to explain environmentally friendly behaviour. The thesis builds on the understanding that an interdisciplinary collaborative approach will facilitate the rapid transfer of knowledge to inform behaviour change interventions. Methods. The application of this approach involved two surveys which explored the psycho-social predictors of environmentally friendly behaviour. Following a qualitative pilot study, and in collaboration with an expert panel comprising academics, industry professionals and government representatives, a self-administered, Theory of Planned Behaviour (TPB) based, mail survey was distributed to a random sample of 3000 residents of Brisbane and Moreton Bay Region (Queensland, Australia). This survey explored specific beliefs including attitudes, norms, perceived control, intention and behaviour, as well as environmental altruism and green identity, in relation to walking for transport and switching off lights when not in use. Following analysis of the mail survey data and based on feedback from participants and key stakeholders, an internet survey was employed (N=451) to explore two additional behaviours, switching off appliances at the wall when not in use, and shopping with reusable bags. This work is presented as a series of interrelated publications which address each of the research aims. Presentation of Findings. Chapter five of this thesis consists of a published paper which addresses the first aim of the research and outlines the collaborative and multidisciplinary approach employed in the mail survey. The paper argued that forging alliances with those who are in a position to immediately utilise the findings of research has the potential to improve the quality and timely communication of research. Illustrating this timely communication, Chapter six comprises a report presented to Moreton Bay Regional Council (MBRC). This report addresses aim's one and two. The report contains a summary of participation in a range of environmentally friendly behaviours and identifies the beliefs which most strongly predicted walking for transport and switching off lights (from the mail survey). These salient beliefs were then recommended as targets for interventions and included: participants believing that they might save money; that their neighbours also switch off lights; that it would be inconvenient to walk for transport and that their closest friend also walks for transport. Chapter seven also addresses the second aim and presents a published conference paper in which the salient beliefs predicting the four specified behaviours (from both surveys) are identified and potential applications for intervention are discussed. Again, a range of TPB based beliefs, including descriptive normative beliefs, were predictive of environmentally friendly behaviour. This paper was also provided to MBRC, along with recommendations for applying the findings. For example, as descriptive normative beliefs were consistently correlated with environmentally friendly behaviour, local councils could engage in marketing and interventions (workshops, letter box drops, internet promotions) which encourage parents and friends to model, rather than simply encourage, environmentally friendly behaviour. The final two papers, presented in Chapters eight and nine, addresses the third aim of the project. These papers each present two behaviours together to inform a TPB based theoretical model with which to predict environmentally friendly behaviour. A generalised model is presented, which is found to predict the four specific behaviours under investigation. The role of demographics was explored across each of the behaviour specific models. It was found that some behaviour's differ by age, gender, income or education. In particular, adjusted models predicted more of the variance in walking for transport amongst younger participants and females. Adjusted models predicted more variance in switching off lights amongst those with a bachelor degree or higher and predicted more variance in switching off appliances amongst those on a higher income. Adjusted models predicted more variance in shopping with reusable bags for males, people 40 years or older, those on a higher income and those with a bachelor degree or higher. However, model structure and general predictability was relatively consistent overall. The models provide a general theoretical framework from which to better understand the motives and predictors of environmentally friendly behaviour. Conclusion. This research has provided an example of the benefits of a collaborative interdisciplinary approach. It has identified a number of salient beliefs which can be targeted for social marketing campaigns and educational initiatives; and these findings, along with recommendations, have been passed on to a local council to be used as part of their ongoing community engagement programs. Finally, the research has informed a practical model, as well as behaviour specific models, for predicting sustainable living behaviours. Such models can highlight important core constructs from which targeted interventions can be designed. Therefore, this research represents an important step in undertaking collaborative approaches to improving population health through human-environment interactions.