On the impact of the "linguistic turn" on research in information systems

The linguistic turn within philosophy has recently gained increased attention within social sciences. It can be seen as an attempt to investigate traditional philosophical problems by analysing the linguistic expressions used for these investigations. More generally, the phenomenon of language itself must be considered because of its (constitutional) impact on the investigation of phenomena in social sciences. In order to understand the consequences of the linguistic turn, its origins in philosophy are important and will be discussed. Within social sciences the linguistic turn already had significant impact. As an example, we will therefore discuss what directions the linguistic turn enabled for organizational analysis. Information Systems as a discipline must face the consequences of the linguistic turn as well. We will discuss how the linguistic framework introduced impacts the development of knowledge management and that of managerial and organizational support systems. This example shows what different perspectives the linguistic turn can provide for investigations within Information Systems. In addition, we will briefly outline the impact of the linguistic turn with respect to methodologies in Information Systems research.

Personalised information gathering and recommender systems : techniques and trends

With the explosive growth of resources available through the Internet, information mismatching and overload have become a severe concern to users. Web users are commonly overwhelmed by huge volume of information and are faced with the challenge of finding the most relevant and reliable information in a timely manner. Personalised information gathering and recommender systems represent state-of-the-art tools for efficient selection of the most relevant and reliable information resources, and the interest in such systems has increased dramatically over the last few years. However, web personalization has not yet been well-exploited; difficulties arise while selecting resources through recommender systems from a technological and social perspective. Aiming to promote high quality research in order to overcome these challenges, this paper provides a comprehensive survey on the recent work and achievements in the areas of personalised web information gathering and recommender systems. The report covers concept-based techniques exploited in personalised information gathering and recommender systems.

Model-driven process configuration of enterprise systems

The configuration of comprehensive enterprise systems to meet the specific requirements of an organisation up to today is consuming significant resources. The results of failing or delayed enterprise system implementation projects are severe and may even threaten the organisation’s existence. One of the main drivers for implementing comprehensive enterprise systems is to streamline business processes. However, an intuitive conceptual support for business process configuration is insufficiently addressed by enterprise system vendors and inadequately researched in academia. This paper presents a model-driven approach to target this problem and proposes several configuration patterns that describe generic patterns of configuration alternatives, in order to understand what situations can occur during business process configuration. Based on these configuration patterns, a configuration notation is introduced that allows for visually highlighting configuration alternatives. Finally, we will sketch how configurable Event Driven Process Chains and the configuration of business processes can be supported using relational databases.

Specifying information systems for business process integration : a management perspective

Supply chain management and customer relationship management are concepts for optimizing the provision of goods to customers. Information sharing and information estimation are key tools used to implement these two concepts. The reduction of delivery times and stock levels can be seen as the main managerial objectives of an integrative supply chain and customer relationship management. To achieve this objective, business processes need to be integrated along the entire supply chain including the end consumer. Information systems form the backbone of any business process integration. The relevant information system architectures are generally well-understood, but the conceptual specification of information systems for business process integration from a management perspective, remains an open methodological problem. To address this problem, we will show how customer relationship management and supply chain management information can be integrated at the conceptual level in order to provide supply chain managers with relevant information. We will further outline how the conceptual management perspective of business process integration can be supported by deriving specifications for enabling information system from business objectives.

An optimized online secondary path modeling method for single-channel feedback ANC systems

This paper proposes a new method for online secondary path modeling in feedback active noise control (ANC) systems. In practical cases, the secondary path is usually time varying. For these cases, online modeling of secondary path is required to ensure convergence of the system. In literature the secondary path estimation is usually performed offline, prior to online modeling, where in the proposed system there is no need for using offline estimation. The proposed method consists of two steps: a noise controller which is based on an FxLMS algorithm, and a variable step size (VSS) LMS algorithm which is used to adapt the modeling filter with the secondary path. In order to increase performance of the algorithm in a faster convergence and accurate performance, we stop the VSS-LMS algorithm at the optimum point. The results of computer simulation shown in this paper indicate effectiveness of the proposed method.

Generator coherency and area detection in large power systems

This paper provides a new general approach for defining coherent generators in power systems based on the coherency in low frequency inter-area modes. The disturbance is considered to be distributed in the network by applying random load changes which is the random walk representation of real loads instead of a single fault and coherent generators are obtained by spectrum analysis of the generators velocity variations. In order to find the coherent areas and their borders in the inter-connected networks, non-generating buses are assigned to each group of coherent generator using similar coherency detection techniques. The method is evaluated on two test systems and coherent generators and areas are obtained for different operating points to provide a more accurate grouping approach which is valid across a range of realistic operating points of the system.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

Assessing resilience of water resources systems under the impacts of climate change

This paper presents an approach to assess the resilience of a water supply system under the impacts of climate change. Changes to climate characteristics such as rainfall, evapotranspiration and temperature can result in changes to the global hydrological cycle and thereby adversely impact on the ability of water supply systems to meet service standards in the future. Changes to the frequency and characteristics of floods and droughts as well as the quality of water provided by groundwater and surface water resources are the other consequences of climate change that will affect water supply system functionality. The extent and significance of these changes underline the necessity for assessing the future functionality of water supply systems under the impacts of climate change. Resilience can be a tool for assessing the ability of a water supply system to meet service standards under the future climate conditions. The study approach is based on defining resilience as the ability of a system to absorb pressure without going into failure state as well as its ability to achieve an acceptable level of function quickly after failure. In order to present this definition in the form of a mathematical function, a surrogate measure of resilience has been proposed in this paper. In addition, a step-by-step approach to estimate resilience of water storage reservoirs is presented. This approach will enable a comprehensive understanding of the functioning of a water storage reservoir under future climate scenarios and can also be a robust tool to predict future challenges faced by water supply systems under the consequence of climate change.

Introducing Masculinity Studies to Information Systems research : the case of Gaydar

I believe that studies of men's gendered experiences of information systems are needed. In order to support this claim, I introduce the area of Masculinity Studies to Information Systems research and, using this, present an exploratory analysis of an internet dating website for gay men – Gaydar. The information system, which forms part of the Gaydar community, is shown to shape, and be shaped by the members as they accept and challenge aspects of it as related to their identities. In doing this, I show how the intertwined processes of information systems development and use contribute to the creation of diverse interpretations of masculinity within a group of men. In sum, my analysis highlights different kinds of men and different versions of masculinity that can sometimes be associated with different experiences of information systems. The implications of this work centre on the need to expand our knowledge of men's gendered experiences with information systems, to reflect upon processes of technology facilitated categorisation and to consider the influences that contribute to the roll out of particular software features along with the underlying rationales for market segmentation in the software and software-based services industries.

Climate change adaptation in urban systems : strategies for planning regimes

Adaptation is increasingly being viewed as a necessary response tool in respect of climate change effects. Though the subject of significant scholarly and professional attention, adaptation still continues to lag behind mitigation in the climate change discourse. However, this situation looks likely to change over the coming years due to a increasing scientific acceptance that certain climate change effects are now inevitable. The purpose of this research is to illustrate, consider and demonstrate how urban planning regimes can use some of their professional tools to develop adaptation strategies and interventions in urban systems. These tools include plan-making, development management, urban design and place-making. Urban systems contribute disproportionately to climate change and will also likely suffer considerably from the resulting effects. Moreover, the majority of the world’s population is now urbanised, suggesting that adaptation will be crucial in order to develop urban systems that are resilient to climate change effects. Informed by a reflexive, qualitative methodology, this paper offers an informed understanding and illustration of adaptation as a climate change response, its use in urban systems and some of the roles and strategies that planning may take in developing and implementing urban adaptation. It concludes that urban planning regimes can have key roles in adapting urban systems to numerous climate change effects.

Shifting from asset dominant to service centric delivery systems: engaging users and communities

Research and practice has observed a shift toward service-oriented approaches that depend on input from users and community as co-producers of services. Yet, in delivering public infrastructure the focus is still on assets rather than services. The contribution of external stakeholders in the co-production of public services is still limited. Using the Policy Delphi with a panel of experts, we found that although practitioners understand the need for asset management to follow the service approach, guidelines and policies still lack that service-centric perspective. Findings revealed a range of obstacles to effective service delivery, related to the sub-optimal involvement of stakeholders’, asymmetric levels of power, the lack of accountability, transparency and availability of government, and the lack of genuine consultations between government and stakeholder groups. The paper concludes by offering directions and strategies for asset managers and policymakers to support and reconnect disengaged government-citizen relations for optimal service delivery outcomes in asset management.

Pull-out strength of steel roof and wall cladding systems

When steel roof and wall cladding systems are subjected to wind uplift/suction forces, local pull-through/dimpling failures or pull-out failures occur prematurely at their screwed connections. During extreme wind events such as storms and hurricanes, these localized failures then lead to severe damage to buildings and their contents. An investigation was therefore carried out to study the failure that occurs when the screw fastener pulls out of the steel battens, purlins, or girts. Both two-span cladding tests and small-scale tests were conducted using a range of commonly used screw fasteners and steel battens, purlins, and girts. Experimental results showed that the current design formula may not be suitable unless a reduced capacity factor of 0.4 is used. Therefore, an improved design formula has been developed for pull-out failures in steel cladding systems. The formula takes into account thickness and ultimate tensile strength of steel, along with thread diameter and the pitch of screw fasteners, in order to model the pull-out behavior more accurately. This paper presents the details of this experimental investigation and its results.

What is an expert? A systems perspective on expertise

1. Expert knowledge continues to gain recognition as a valuable source of information in a wide range of research applications. Despite recent advances in defining expert knowledge, comparatively little attention has been given to how to view expertise as a system of interacting contributory factors, and thereby, to quantify an individual’s expertise. 2. We present a systems approach to describing expertise that accounts for many contributing factors and their interrelationships, and allows quantification of an individual’s expertise. A Bayesian network (BN) was chosen for this purpose. For the purpose of illustration, we focused on taxonomic expertise. The model structure was developed in consultation with professional taxonomists. The relative importance of the factors within the network were determined by a second set of senior taxonomists. This second set of experts (i.e. supra-experts) also provided validation of the model structure. Model performance was then assessed by applying the model to hypothetical career states in the discipline of taxonomy. Hypothetical career states were used to incorporate the greatest possible differences in career states and provide an opportunity to test the model against known inputs. 3. The resulting BN model consisted of 18 primary nodes feeding through one to three higher-order nodes before converging on the target node (Taxonomic Expert). There was strong consistency among node weights provided by the supra-experts for some nodes, but not others. The higher order nodes, “Quality of work” and “Total productivity”, had the greatest weights. Sensitivity analysis indicated that although some factors had stronger influence in the outer nodes of the network, there was relatively equal influence of the factors leading directly into the target node. Despite differences in the node weights provided by our supra-experts, there was remarkably good agreement among assessments of our hypothetical experts that accurately reflected differences we had built into them. 4. This systems approach provides a novel way of assessing the overall level of expertise of individuals, accounting for multiple contributory factors, and their interactions. Our approach is adaptable to other situations where it is desirable to understand components of expertise.

Populism, law and order and the crimes of the 1%

The article examines the evidence of endemic financial crime in the global financial crisis (GFC), the legal impunity surrounding these crimes and the popular revolt against these abuses in the financial, political and legal systems. This is set against a consideration of the development since the 1970s of a conservative politics championing de-regulation, unfettered markets, welfare cuts and harsh law and order policies. On the one hand, this led to massively increased inequality and concentrations of wealth and political power in the hands of the super-rich, effectively placing them above the law, as the GFC revealed. On the other, a greatly enlarged, more punitive criminal justice system was directed at poor and minority communities. Explanations in terms of the rise of penal populism are helpful in explaining these developments, but it is argued they adopt a limited and reductionist view of populism, failing to see the prospects for a progressive populist politics to re-direct political attention to issues of inequality and corporate and white collar criminality.

Exchanging data between Digital Human Modelling systems : a review of data formats

Digital human modeling (DHM) systems underwent significant development within the last years. They achieved constantly growing importance in the field of ergonomic workplace design, product development, product usability, ergonomic research, ergonomic education, audiovisual marketing and the entertainment industry. They help to design ergonomic products as well as healthy and safe socio-technical work systems. In the domain of scientific DHM systems, no industry specific standard interfaces are defined which could facilitate the exchange of 3D solid body data, anthropometric data or motion data. The focus of this article is to provide an overview of requirements for a reliable data exchange between different DHM systems in order to identify suitable file formats. Examples from the literature are discussed in detail. Methods: As a first step a literature review is conducted on existing studies and file formats for exchanging data between different DHM systems. The found file formats can be structured into different categories: static 3D solid body data exchange, anthropometric data exchange, motion data exchange and comprehensive data exchange. Each file format is discussed and advantages as well as disadvantages for the DHM context are pointed out. Case studies are furthermore presented, which show first approaches to exchange data between DHM systems. Lessons learnt are shortly summarized. Results: A selection of suitable file formats for data exchange between DHM systems is determined from the literature review.