Estimating the burden of disease attributable to lead exposure in South Africa in 2000

Objectives To estimate the burden of disease attributable to lead exposure in South Africa in 2000. Design World Health Organization comparative risk assessment (CRA) methodology was followed. Recent community studies were used to derive mean blood lead concentrations in adults and children in urban and rural areas. Population-attributable fractions were calculated and applied to revised burden of disease estimates for the relevant disease categories for South Africa in the year 2000. Monte Carlo simulation-modelling techniques were used for the uncertainty analysis. Setting South Africa. Subjects Children under 5 and adults 30 years and older. Outcome measures Cardiovascular mortality and disability-adjusted life years (DALYs) in adults 30 years and older and mild mental disability DALYs in children under 5 years. Results Lead exposure was estimated to cause 1 428 deaths (95% uncertainty interval 1 086-1 772) or 0.27% (95% uncertainty interval: 0.21 - 0.34%) of all deaths in South Africa in 2000. Burden of disease attributed to lead exposure was dominated by mild mental disability in young children, accounting for 75% of the total 58 939 (95% uncertainty interval 55 413 - 62 500) attributable DALYs. Cardiovascular disease in adults accounted for the remainder of the burden. Conclusions Even with the phasing out of leaded petrol, exposure to lead from its ongoing addition to paint, paraoccupational exposure and its use in backyard 'cottage industries' will continue to be an important public health hazard in South Africa for decades. Young children, especially those from disadvantaged communities, remain particularly vulnerable to lead exposure and poisoning.

Lead the change series: Q & A with Allan Luke

An overview of current issues in school and system reform.

Learning to lead: The development and testing of a model of leadership learning

Drawing upon an action learning perspective, we hypothesized that a leader’s learning of project leadership skills would be related to facilitative leadership, team reflexivity, and team performance. Secondly, we proposed that new and experienced leaders would differ in the amount they learn from their current and recent experience as project managers, and in the strength of the relationship between their self-reported learning, facilitative leadership, and team reflexivity. We conducted a 1-year longitudinal study of 50 R&D teams, led by 25 new and 25 experienced leaders, with 313 team members and 22 project customers, collecting both quantitative and qualitative data. We found evidence of a significant impact of the leader’s learning on subsequent facilitative leadership and team performance 8 and 12 months later, suggesting a lag between learning leadership skills and translating these skills into leadership behavior. The findings contribute to an understanding of how leaders consolidate their learned experience into facilitative leadership behavior.

Insertions in the OCL1 locus of Acinetobacter baumannii lead to shortened lipooligosaccharides

Genomes of 82 Acinetobacter baumannii global clones 1 (GC1) and 2 (GC2) isolates were sequenced and different forms of the locus predicted to direct synthesis of the outer core (OC) of the lipooligosaccharide were identified. OCL1 was in all GC2 genomes, whereas GC1 isolates carried OCL1, OCL3 or a new locus, OCL5. Three mutants in which an insertion sequence (ISAba1 or ISAba23) interrupted OCL1 were identified. Isolates with OCL1 intact produced only lipooligosaccharide, while the mutants produced lipooligosaccharide of reduced molecular weight. Thus, the assignment of the OC locus as that responsible for the synthesis of the OC is correct.

Rallying the troops or beating the horses? How project-related demands can lead to either high performance or abusive supervision

In today's high-pressure work environment, project managers are often forced to “do more with less.” We argue that this imperative can lead project managers to engage in either high-performance or abusive supervision behaviors. To understand this process, we develop a model and associated propositions linking a project manager's cognitive appraisal of project-related demands to high-performance work practices versus abusive supervision behaviors—both of which impact three project outcomes: stakeholder relationships, people-related project success factors, and employee well-being. We propose that the choice between high-performance work practices and abusive supervision behaviors is moderated by a project manager's personal resources (psychological capital, emotional intelligence, and dark triad personality).

Response of laminated glass panels to near field blast events

This thesis develops and applies an analytical method to treat the blast response of glass façades and studies the influence of controlling parameters such as all component materials and geometric properties, support conditions and energy absorption, and hence establishes a framework for their design for a credible blast event.

Single layer lead iodide: Computational exploration of structural, electronic and optical properties, strain induced band modulation and the role of spin-orbital-coupling

Graphitic like layered materials exhibit intriguing electronic structures and thus the search for new types of two-dimensional (2D) monolayer materials is of great interest for developing novel nano-devices. By using density functional theory (DFT) method, here we for the first time investigate the structure, stability, electronic and optical properties of monolayer lead iodide (PbI2). The stability of PbI2 monolayer is first confirmed by phonon dispersion calculation. Compared to the calculation using generalized gradient approximation, screened hybrid functional and spin–orbit coupling effects can not only predicts an accurate bandgap (2.63 eV), but also the correct position of valence and conduction band edges. The biaxial strain can tune its bandgap size in a wide range from 1 eV to 3 eV, which can be understood by the strain induced uniformly change of electric field between Pb and I atomic layer. The calculated imaginary part of the dielectric function of 2D graphene/PbI2 van der Waals type hetero-structure shows significant red shift of absorption edge compared to that of a pure monolayer PbI2. Our findings highlight a new interesting 2D material with potential applications in nanoelectronics and optoelectronics.

Influence of interlayer properties on the blast performance of laminated glass panels

This paper investigates the influence of interlayer properties on the blast performance of laminated glass (LG) panels. A parametric study is carried out by varying the thickness and Young’s modulus (E) of the interlayer under two different blast loads. Results indicate the existence of a critical interlayer thickness (or E) that causes the onset of interlayer failure. This should be achieved in the design to enhance energy absorption, reduce support reactions and initiate a safer failure mode. Present findings provide information to achieve such design targets and enable safe and efficient performance of LGs under credible blast loads.

Influence of structural sealant joints on the blast performance of laminated glass panels

This paper investigates the influence of structural sealant joints on the blast performance of laminated glass (LG) panels, using a comprehensive numerical procedure. A parametric study was carried out by varying the width, thickness and the Young’s modulus (E) of the structural silicone sealant joints and the behavior of the LG panel was studied under two different blast loads. Results show that these parameters influence the blast response of LG panels, especially under the higher blast load. Sealant joints that are thicker, have smaller widths and lower E values increase the flexibility at the supports and hence increase the energy absorption of the LG panel while reducing the support reactions. Results also confirmed that sealant joints designed according to current standards perform well under blast loads. Modeling techniques presented in this paper could be used to complement and supplement the guidance in existing design standards. The new information generated in this paper will contribute towards safer and more economical designs of entire facade systems including window glazing, frames and supporting structures.

N-ethyl-N-nitrosourea (ENU) induced mutations within the Klotho gene lead to ectopic calcification and reduced lifespan in mouse models

Ectopic calcification (EC), which is the pathological deposition of calcium and phosphate in extra-skeletal tissues, may be associated with hypercalcaemic and hyperphosphataemic disorders, or it may occur in the absence of metabolic abnormalities. In addition, EC may be inherited as part of several monogenic disorders and studies of these have provided valuable insights into the metabolic pathways regulating mineral metabolism. For example, studies of tumoural calcinosis, a disorder characterised by hyperphosphataemia and progressive EC, have revealed mutations of fibroblast growth factor 23 (FGF23), polypeptide N-acetyl galactosaminyltransferase 3 (GALNT3) and klotho (KL), which are all part of a phosphate-regulating pathway. However, such studies in humans are limited by the lack of available large families with EC, and to facilitate such studies we assessed the progeny of mice treated with the chemical mutagen N-ethyl-N-nitrosourea (ENU) for EC. This identified two mutants with autosomal recessive forms of EC, and reduced lifespan, designated Ecalc1 and Ecalc2. Genetic mapping localized the Ecalc1 and Ecalc2 loci to a 11.0 Mb region on chromosome 5 that contained the klotho gene (Kl), and DNA sequence analysis identified nonsense (Gln203Stop) and missense (Ile604Asn) Kl mutations in Ecalc1 and Ecalc2 mice, respectively. The Gln203Stop mutation, located in KL1 domain, was severely hypomorphic and led to a 17-fold reduction of renal Kl expression. The Ile604Asn mutation, located in KL2 domain, was predicted to impair klotho protein stability and in vitro expression studies in COS-7 cells revealed endoplasmic reticulum retention of the Ile604Asn mutant. Further phenotype studies undertaken in Ecalc1 (kl203X/203X) mice demonstrated elevations in plasma concentrations of phosphate, FGF23 and 1,25-dihydroxyvitamin D. Thus, two allelic variants of Kl that develop EC and represent mouse models for tumoural calcinosis have been established. © 2015 Esapa et al.

Effects of particle size distribution in the response of model granular materials in multi-ring shear

Rail track undergoes complex loading patterns under moving traffic conditions compared to roads due to its continued and discontinued multi-layered structure, including rail, sleepers, ballast layer, sub-ballast layer, and subgrade. Particle size distributions (PSDs) of ballast, subballast, and subgrade layers can be critical in cyclic plastic deformation of rail track under moving traffic on frequent track degradation of rail tracks, especially at bridge transition zones. Conventional test approaches: static shear and cyclic single-point load tests are however unable to replicate actual loading patterns of moving train. Multi-ring shear apparatus; a new type of torsional simple shear apparatus, which can reproduce moving traffic conditions, was used in this study to investigate influence of particle size distribution of rail track layers on cyclic plastic deformation. Three particle size distributions, using glass beads were examined under different loading patterns: cyclic sin-gle-point load, and cyclic moving wheel load to evaluate cyclic plastic deformation of rail track under different loading methods. The results of these tests suggest that particle size distributions of rail track structural layers have significant impacts on cyclic plastic deformation under moving train load. Further, the limitations in con-ventional test methods used in laboratories to estimate the plastic deformation of rail track materials lead to underestimate the plastic deformation of rail tracks.

Do health inquiries lead to health system change? What have we learnt from recent health inquiries and will the same mistakes happen again?

Since 2001 there have been numerous Commissions of Inquiry into health system failures across the world. While the Inquiries were established to examine poor patient outcomes, each has identified a range of leadership and management shortcomings that have contributed to a poor standard of patient care. While there is an acknowledgement that different heath systems have different contexts, this paper highlights a number of themes that are common across Inquiries. It will discuss a number of common system failures in Inquiries spanning from 2001 to 2013 and pose questions as to why these types of failures are likely to re-occur, as well as possible learnings for health service management and leadership to address a number of these common themes.