Planning most-likely paths from overhead imagery

This paper is about planning paths from overhead imagery, the novelty of which is taking explicit account of uncertainty in terrain classification and spatial variation in terrain cost. The image is first classified using a multi-class Gaussian Process Classifier which provides probabilities of class membership at each location in the image. The probability of class membership at a particular grid location is then combined with a terrain cost evaluated at that location using a spatial Gaussian process. The resulting cost function is, in turn, passed to a planner. This allows both the uncertainty in terrain classification and spatial variations in terrain costs to be incorporated into the planned path. Because the cost of traversing a grid cell is now a probability density rather than a single scalar value, we can produce not only the most-likely shortest path between points on the map, but also sample from the cost map to produce a distribution of paths between the points. Results are shown in the form of planned paths over aerial maps, these paths are shown to vary in response to local variations in terrain cost.

FPGA implementation of an evolutionary algorithm for autonomous unmanned aerial vehicle on-board path planning

In this paper, a hardware-based path planning architecture for unmanned aerial vehicle (UAV) adaptation is proposed. The architecture aims to provide UAVs with higher autonomy using an application specific evolutionary algorithm (EA) implemented entirely on a field programmable gate array (FPGA) chip. The physical attributes of an FPGA chip, being compact in size and low in power consumption, compliments it to be an ideal platform for UAV applications. The design, which is implemented entirely in hardware, consists of EA modules, population storage resources, and three-dimensional terrain information necessary to the path planning process, subject to constraints accounted for separately via UAV, environment and mission profiles. The architecture has been successfully synthesised for a target Xilinx Virtex-4 FPGA platform with 32% logic slices utilisation. Results obtained from case studies for a small UAV helicopter with environment derived from LIDAR (Light Detection and Ranging) data verify the effectiveness of the proposed FPGA-based path planner, and demonstrate convergence at rates above the typical 10 Hz update frequency of an autopilot system.

An integrated approach for precise road reconstruction from aerial imagery and LiDAR data

Accurate and detailed road models play an important role in a number of geospatial applications, such as infrastructure planning, traffic monitoring, and driver assistance systems. In this thesis, an integrated approach for the automatic extraction of precise road features from high resolution aerial images and LiDAR point clouds is presented. A framework of road information modeling has been proposed, for rural and urban scenarios respectively, and an integrated system has been developed to deal with road feature extraction using image and LiDAR analysis. For road extraction in rural regions, a hierarchical image analysis is first performed to maximize the exploitation of road characteristics in different resolutions. The rough locations and directions of roads are provided by the road centerlines detected in low resolution images, both of which can be further employed to facilitate the road information generation in high resolution images. The histogram thresholding method is then chosen to classify road details in high resolution images, where color space transformation is used for data preparation. After the road surface detection, anisotropic Gaussian and Gabor filters are employed to enhance road pavement markings while constraining other ground objects, such as vegetation and houses. Afterwards, pavement markings are obtained from the filtered image using the Otsu's clustering method. The final road model is generated by superimposing the lane markings on the road surfaces, where the digital terrain model (DTM) produced by LiDAR data can also be combined to obtain the 3D road model. As the extraction of roads in urban areas is greatly affected by buildings, shadows, vehicles, and parking lots, we combine high resolution aerial images and dense LiDAR data to fully exploit the precise spectral and horizontal spatial resolution of aerial images and the accurate vertical information provided by airborne LiDAR. Objectoriented image analysis methods are employed to process the feature classiffcation and road detection in aerial images. In this process, we first utilize an adaptive mean shift (MS) segmentation algorithm to segment the original images into meaningful object-oriented clusters. Then the support vector machine (SVM) algorithm is further applied on the MS segmented image to extract road objects. Road surface detected in LiDAR intensity images is taken as a mask to remove the effects of shadows and trees. In addition, normalized DSM (nDSM) obtained from LiDAR is employed to filter out other above-ground objects, such as buildings and vehicles. The proposed road extraction approaches are tested using rural and urban datasets respectively. The rural road extraction method is performed using pan-sharpened aerial images of the Bruce Highway, Gympie, Queensland. The road extraction algorithm for urban regions is tested using the datasets of Bundaberg, which combine aerial imagery and LiDAR data. Quantitative evaluation of the extracted road information for both datasets has been carried out. The experiments and the evaluation results using Gympie datasets show that more than 96% of the road surfaces and over 90% of the lane markings are accurately reconstructed, and the false alarm rates for road surfaces and lane markings are below 3% and 2% respectively. For the urban test sites of Bundaberg, more than 93% of the road surface is correctly reconstructed, and the mis-detection rate is below 10%.

Force controlled hexapod walking

In this paper we describe the dynamic simulation of an 18 degrees of freedom hexapod robot with the objective of developing control algorithms for smooth, efficient and robust walking in irregular terrain. This is to be achieved by using force sensors in addition to the conventional joint angle sensors as proprioceptors. The reaction forces on the feet of the robot provide the necessary information on the robots interaction with the terrain. As a first step we validate the simulator by implementing movement control by joint torques using PID controllers. As an unexpected by-product we find that it is simple to achieve robust walking behaviour on even terrain for a hexapod with the help of PID controllers and by specifying a trajectory of only a few joint configurations.

Perceptions of charities and the ultimate gift : the use of the Repertory Test to elicit salient bequest decision criteria

This paper reports a practitioner/academic collaboration that sought to identify the attributes salient in the decision-making process of individuals considering a charitable bequest in Australia. Philanthropy scholars concur that bequest making behaviour is generally not well understood or researched and is fertile terrain for new enquiry. They urge scholars and practitioners to integrate learning from other relevant disciplines to reveal new insights and understandings into why so many individuals elect to make a testamentary gift to a charity in their will or other planned giving instrument. This research draws on the branding literature; and effectively trialed the use of Kelly’s (1955) Repertory Test from clinical psychology, the results of which will provide researchers and charity marketing practitioners with an enhanced understanding of bequest decision criteria.

Integrated vision-based attitude estimation

For many years, computer vision has lured researchers with promises of a low-cost, passive, lightweight and information-rich sensor suitable for navigation purposes. The prime difficulty in vision-based navigation is that the navigation solution will continually drift with time unless external information is available, whether it be cues from the appearance of the scene, a map of features (whether built online or known a priori), or from an externally-referenced sensor. It is not merely position that is of interest in the navigation problem. Attitude (i.e. the angular orientation of a body with respect to a reference frame) is integral to a visionbased navigation solution and is often of interest in its own right (e.g. flight control). This thesis examines vision-based attitude estimation in an aerospace environment, and two methods are proposed for constraining drift in the attitude solution; one through a novel integration of optical flow and the detection of the sky horizon, and the other through a loosely-coupled integration of Visual Odometry and GPS position measurements. In the first method, roll angle, pitch angle and the three aircraft body rates are recovered though a novel method of tracking the horizon over time and integrating the horizonderived attitude information with optical flow. An image processing front-end is used to select several candidate lines in a image that may or may not correspond to the true horizon, and the optical flow is calculated for each candidate line. Using an Extended Kalman Filter (EKF), the previously estimated aircraft state is propagated using a motion model and a candidate horizon line is associated using a statistical test based on the optical flow measurements and location of the horizon in the image. Once associated, the selected horizon line, along with the associated optical flow, is used as a measurement to the EKF. To evaluate the accuracy of the algorithm, two flights were conducted, one using a highly dynamic Uninhabited Airborne Vehicle (UAV) in clear flight conditions and the other in a human-piloted Cessna 172 in conditions where the horizon was partially obscured by terrain, haze and smoke. The UAV flight resulted in pitch and roll error standard deviations of 0.42° and 0.71° respectively when compared with a truth attitude source. The Cessna 172 flight resulted in pitch and roll error standard deviations of 1.79° and 1.75° respectively. In the second method for estimating attitude, a novel integrated GPS/Visual Odometry (GPS/VO) navigation filter is proposed, using a structure similar to a classic looselycoupled GPS/INS error-state navigation filter. Under such an arrangement, the error dynamics of the system are derived and a Kalman Filter is developed for estimating the errors in position and attitude. Through similar analysis to the GPS/INS problem, it is shown that the proposed filter is capable of recovering the complete attitude (i.e. pitch, roll and yaw) of the platform when subjected to acceleration not parallel to velocity for both the monocular and stereo variants of the filter. Furthermore, it is shown that under general straight line motion (e.g. constant velocity), only the component of attitude in the direction of motion is unobservable. Numerical simulations are performed to demonstrate the observability properties of the GPS/VO filter in both the monocular and stereo camera configurations. Furthermore, the proposed filter is tested on imagery collected using a Cessna 172 to demonstrate the observability properties on real-world data. The proposed GPS/VO filter does not require additional restrictions or assumptions such as platform-specific dynamics, map-matching, feature-tracking, visual loop-closing, gravity vector or additional sensors such as an IMU or magnetic compass. Since no platformspecific dynamics are required, the proposed filter is not limited to the aerospace domain and has the potential to be deployed in other platforms such as ground robots or mobile phones.

The Moral Economy of Everyday Crime: Markets, Consumers and Citizens

Between the crimes in the suites and the crimes in the streets lies the mostly unexplored terrain within which we find crimes of ‘everyday life’. Not all of these are formally illegal, but all are generally seen as morally dubious. Most of the crimes of everyday life are committed in the contemporary marketplace, and by those who think of themselves (and are mostly considered by others) as respectable citizens. We contextualize normative orientations that are conducive to such types of behaviour using a framework that links E. P. Thompson’s (1963) concept of the ‘moral economy’ with Institutional Anomie Theory (Messner and Rosenfeld 1994, 2007). Findings from a comparative survey study in three economic change regions (England and Wales, Western and Eastern Germany) show that a syndrome of market anomie comprising distrust, fear and cynical attitudes toward law increases the willingness of respectable citizens to engage in illegal and unfair practices in the marketplace.

The SAGE Handbook of Criminological Research Methods

Conducting research into crime and criminal justice carries unique challenges. This Handbook focuses on the application of 'methods' to address the core substantive questions that currently motivate contemporary criminological research. It maps a canon of methods that are more elaborated than in most other fields of social science, and the intellectual terrain of research problems with which criminologists are routinely confronted. Drawing on exemplary studies, chapters in each section illustrate the techniques (qualitative and quantitative) that are commonly applied in empirical studies, as well as the logic of criminological enquiry. Organized into five sections, each prefaced by an editorial introduction, the Handbook covers: • Crime and Criminals • Contextualizing Crimes in Space and Time: Networks, Communities and Culture • Perceptual Dimensions of Crime • Criminal Justice Systems: Organizations and Institutions • Preventing Crime and Improving Justice Edited by leaders in the field of criminological research, and with contributions from internationally renowned experts, The SAGE Handbook of Criminological Research Methods is set to become the definitive resource for postgraduates, researchers and academics in criminology, criminal justice, policing, law, and sociology.

Composing maternal identities : the living realities of mothers with young adult-children in twenty-first century Australia

There is an abundance of books available on the topic of motherhood and mothering; the majority of these books focus on the vulnerability of babies and young children and the motherwork such vulnerability demands. In particular they focus on what it is right to do in the interests of the child, and particularly his or her growth and development. Such a focus is consistent in Western culture with modern moral frameworks where understandings of goodness have been assimilated to dimensions of human action rather than dimensions of human being, selfhood, or specific forms of life. As Charles Taylor has observed, much modern moral philosophy has focused =on what it is right to do rather than the nature of the good life‘ (1989, 13). The master narratives of motherhood and the prevailing social discourses of intensive1 and sacrificial2 mothering exemplify this view as such narratives and discourses depict =what mothers are expected to do [and] how mothers are supposed to be‘ (Nelson 2001, 140). From such infant/child-focused accounts a canonical maternal identity can be discerned; arguably, it is a restricted one. The majority of these books fail to address questions related to what it means be a mother in particular situated, existing, living realities. For instance, ask a mother with young children what being a mother means to her and she may speak of the challenges she faces balancing paid employment and her role as a mother, or the impact of the demands being made on her time and energy. However, ask a mother with young adult-children3 what being a mother means to her and she may speak in similar tones, but she may also speak in differing tones. For example, a "mature" mother may speak of the "empty nest", the "crowded house" and/or "its revolving front door". She may speak of issues related to the vulnerability of the long term marriage, elder care, or grandparenting, or even disillusionment and disenchantment. The purpose of this research is to explore the identity challenges and prospects of some mothers with young adult-children aged between 18 and 30 years of age in twenty-first century Australia. In interpreting the identity challenges and prospects this particular cohort of mothers encounter in their ordinary, everyday living, a diverse and particular range of maternal experiences.my own included5.have been traced, along with the social and ethical meanings ascribed in them. With an understanding and appreciation of voice as the medium which connects one's inner and outer worlds, this research illuminates the plurality of voices and the multiple layers of meaning in each of these mother's particular living and existing realities. Specifically, this research addresses the narrowly constructed, canonical maternal identity through a critical exploration and reflection on stories, shared in a research context, of the living realities of a group of self-identified "mature", middle-class, Australian mothers with children aged between 18 and 30 years of age6. By appraising the broader familial, historical, social, cultural, institutional, and, importantly, moral contexts in which these mothers are situated, 'thick descriptions' (Geertz 1973, 27)7 of maternal identities, and the challenges and prospects these mothers are negotiating, are provided. In terms of its ethical orientation, the frameworks which support and frame this research reject, repudiate and contest (Nelson 2001) the reduction of ethical concerns to individual or intellectual problems or dilemmas to be solved through the application of a theory derived from reasoned thinking. In dismissing deductive and =theoretical-juridical‘8 approaches, the individualistic orientation entrenched in contemporary Western moral thinking, expressed in the notion of '"what ought I to do" when faced with a problem, issue or dilemma of practical urgency' (Isaacs & Massey 1994, 1), is simultaneously rejected, repudiated and contested (Nelson 2001). In countering such understandings, this research reorients us to the illumination and articulation of who it is good to be, for each of these mothers, in allegiance with those goods which guide and inspire her orientations towards living a good life—a life which embraces and enhances the flourishing of herself and her significant others. With an understanding and appreciation that 'mind is never free of precommitment[—t]here is no innocent eye, nor is there one that penetrates aboriginal reality' (Bruner 1987, 32), this thesis is written with the voices of other interlocutors9. These interlocutors include the voices of my research participants whom I refer to as "research interlocutors", my textual "friends" — those scholars whose work resonates strongly with my orientations—as well as the myriad other voices that speak to mothers, for mothers and about mothers, such as those found in popular and mainstream press and culture. Sometimes these voices resonate; other times dissonance may be heard. In situating this research within these complementary frameworks, this research invites readers to join with me in considering, appreciating and appraising the narrow construction of maternal identity. I seek for this engagement, like the engagements with my research interlocutors, to be 'a meeting of voices, an authentic dialogue that is inclusive of the voices of all concerned participants' (Isaacs 2001, 6). I hope that the voices in this thesis resonate with yours (although, at times, you may feel some dissonance) and that together we can draw closer to the accounting, re-counting and re-stor(y)ing of maternal identities; like concentric circles of witness, the dialogue, ...will thus be expanded rippling into corners where one might both imagine, and least expect. Possibilities, then, are vast; the future exciting (Smith 2007, 397). This research is also shaped and guided by maternal scholarship, a relatively new field of inquiry known as 'motherhood studies' (O'Reilly 2011, xvii) which has its origins within the broader terrain of feminist scholarship. As a work of maternal scholarship, this thesis draws upon and continues the tradition of examining motherhood as it is experienced 'in a social context, as embedded in a political institution: in feminist terms' (Rich 1995, ix). It values mothers, their experiences, their stories, their lives. As such, this research is oriented towards 'matricentric feminism', a particular form of feminist inquiry, politics and theory which is consistent with and receptive to feminist frameworks of care and equal rights (O‘Reilly 2011, 25). A number of complementary conceptual frameworks have been engaged in this research with the thesis presented in three parts: the pre-figurative, configurative and re-configurative. As my particular living experiences provided the initial motivation for this research, an account of the challenges I experienced as a mother with young adult-children are outlined as a Prelude to this thesis. Attention then turns to Part One – Pre-figuring Maternal Identities in which the contextual, conceptual and methodological foundations underpinning this research are explored and outlined. In Chapter One, the prevailing cultural narratives and social discourses supporting and shaping the construction of the canonical maternal identity are outlined. Next, in setting the scholarly context, the critiques — arising from feminist and maternal scholarship — of motherhood as a patriarchal institution, mothering as experience, and mothering as work, are explored. As this research engaged with participants who are embedded in particular middle-class, heterosexual, familial and cultural structures, an exploration of family life cycle theory and main stream media accounts are also incorporated. The terrain in which "mature" mothering within an Australian context is experienced is also outlined, including the notions of "empty nests" and "crowded houses", grandparenting, elder care and women's midlife transition. Chapter Two gives an account of the conceptual ontological, ethical, identity and narrative frameworks underpinning this research. In setting the context for rich interpretations, the characteristics of being human10 are outlined before attention turns to our embodiment and embeddedness in our shared human condition11. From this point, attention then turns to understanding the moral form of human living12. In appreciating the vulnerability inherent in our shared human condition, the ways in which we may experience trouble in our lives is noted. The framing of identity constitution13 as complex, multi-faceted, relationally negotiated and composed is then outlined, followed by an understanding of why narrative is a valuable interpretive tool for interpreting and understanding human experiences. This chapter concludes with an appreciation of the ethical significance of storytelling. The research methodology is then outlined in Chapter Three. The rationale underpinning the adoption of the narrative interviewing technique of in-depth interviewing is explored. In exploring these methodological frameworks, the recruitment and interview processes involved in gathering and interpreting the recorded transcripts of ten Australian mothers with young adult-children are outlined. The method of analysis known as the Listening Guide14 best complements the multi-layered, pluri-vocal nature of narrative accounting. The final section of Chapter Three outlines The Guide, with one mother's recorded transcript used to illustrate this method's step-by-step process. Having gathered an understanding and appreciation of the pluri-vocal, multi-layered nature of narrative and identity constitution, the tone of this thesis changes in Part Two . Configuring Maternal Identities. This section consists of Chapters Four and Five and seeks to find meaning in, and make sense of, the differences and commonalities across these particular accounts. Chapter Four explores the living realities of four Australian mothers with young adult-children: Poppy, Honey, Lily and Heather. In presenting a thick description of these mothers' situated realities, the frameworks.the familial, social, cultural, historical and institutional backgrounds.which have supported and shaped each mother's experiences are illuminated. Simultaneously revealed through these particular accounts are the plurality of goods focusing and moving each mother to the moral form of life, a life of meaning and purpose. The harms challenging some mothers' moral motivations are also revealed in this chapter. Specifically illustrated in Chapter Four are the unique and qualitative differences of particular maternal identity configurations. Chapter Five reveals the commonalities amongst all of the research interlocutors' accounts. This chapter contests the individualistic orientation of many contemporary accounts of motherhood which are aimed at defining or contesting what a "good" mother ought to do. By turning away from such individualistic orientations, the chapter does not seek to define 'the content of obligation' (Taylor 1989, 3) but rather seeks to illuminate and articulate a richer, deeper understanding and appreciation of maternal be-ing and be-coming - that is, who it is good to be, for each of these mothers - in allegiance with those goods that focus and inspire her moral motivations. Part Three - Re-Configuring Maternal Identities, which is comprised of Chapter Six, draws this thesis to a close. In this final chapter, the preconceptions, conditions and aspirations for this mother-centred account of the living realities of a small, local cohort of mothers are reiterated. The insights gathered from the rich, descriptive accounts are illuminated and articulated, and the chapter closes with some suggestions for future research. In a Postlude, I reflect on how this research has been a transformative learning experience in my own life.an experience in which I have been able to not only deeply understand and appreciate the challenges and disorientation I was experiencing but also to identify and reorient my stance in relation to the good. In a practical sense, by offering thick descriptions of the living realities of this cohort of "mature" mothers, this research challenges the canonical maternal identity and questions its relevance for, and effect on, "mature" mothers' identity constitution. By bringing to light the complex existing realities of these particular mothers, this research critiques the canonical maternal identity by illustrating that each mother's life and her identity constitutions are complex, relationally negotiated and composed and that motherhood is an enduring way of being. Through these illustrations, this research engages with and extends understandings of difference feminism. This research, however, not only rejects, repudiates and contests (Nelson 2001) the narrowly defined canonical maternal identity. By illuminating and articulating the goods which shape and inspire these "mature" mothers' motherwork, this research offers a matricentric account which is consistent with and respectful of the particular, situated realities—the broader familial, social, institutional, but most importantly, moral values and frameworks—in which each mother‘s life is embedded and her motherwork oriented. By understanding and appreciating the complex and multiple webs of relationships in which each mother exists, this matricentric re-stor(y)ing of maternal experiences not only understands and appreciates the unique nature of each mother‘s existing realities, it is oriented to the continuing enhancing of the shared pursuit of the good which underpins particular maternal practices and particular maternal ways of being.

The silence of objects : forming the unsayable

The silence of objects phenomenologically explores the experience and memory of trauma through object-based artwork. It springs from a desire to map difficult psychological terrain and does so by tracking the process of a coming into 'expression' to communicate notions of loss, detachment and powerlessness. It maps a journey from silence to a forming 'voice' that gives shape to the unsayable. This practice-led research is multifaceted. Whilst the creative element uses transformed objects as material metaphors to tap into the sensory and affective operations of art, the written component blends reflection with theory and is informed by art theorists Jill Bennett and Mignon Nixon. By establishing a dialogue between theoretical constructs and creative works I consider how giving form to deep consciousness can counter the effects of trauma manifest as silence and invisibility.

Adaptation and empathy : intercultural communication in a choreographic project

The tricky terrain of intercultural communication within the pressure-cooker environment of creating new performance work is explored through the experiences of five Australians working with 55 artists in Hanoi, Vietnam on a project called Through the Eyes of the Phoenix. Key cultural communication issues such as the concept of ‘face’, identity, translation, adaptability, ambiguity tolerance, empathy, enmeshment and the development of shared understandings are examined in relation to theories of high and low context cultures and individualist collectivist frameworks. The experiences of both Australian and Vietnamese artists are foregrounded, revealing the importance of other intercultural communication modes such as visual, kinaesthetic and tactile languages as well as the languages of their art forms. Immersion in social activities and the importance of the emotional domain are also highlighted as essential factors to survive and thrive in intense creative collaborations across cultures. These dance perspectives, embedded in practice, provide alternative contributions to the messy complexities of intercultural communication.

Nourishing or polluting : redefining the role of waste in the fashion system

Waste is intrinsic to the fashion system. Fashion is predicated on built-in obsolescence, and as such outmoded garments are rapidly discarded to charity shops or landfill. However, the story of fashion is also one of abundance and extravagance in design ideas. Every season there are new design details – prints, embroidery, embellishments, shapes and textures. This excess of ideas is in itself another form of waste, albeit one that is culturally nourishing. The grave of a fashion garment may also be the grave of a season’s research and creativity. This paper compares the tangible waste of the industry with its intangible waste, namely fashion’s creativity and cultural excess. Fashion’s excess and abundance of trends and ideas makes any move to curb the environmental impact difficult. For all practitioners of fashion – whether designers or consumers – the waste and excess inherent in the fashion system is a difficult ethical terrain to negotiate. However, inverting the wasteful phases of the production cycle can help reframe waste from pollution to a source of nourishment for future practice. While creative excesses of designers may be ‘wasted’ after a season, fashion styles and tropes are recycled and reinvented, with the once passé styles and design ideas from previous years revalorized and returned into the fashion system. Similarly, material garments acquire new value through entering or re-entering the second hand or vintage markets. Design processes can utilise pre or post-consumer textile waste, or eliminate waste through design. In these processes, waste becomes the primary source of nourishment for future fashion cycles.

Were intercalated komatiites and dacites at the Black Swan nickel sulphide mine, Yilgarn Craton, Western Australia, emplaced as extrusive lavas or intrusive bodies? The significance of breccia textures and contact relationships

Intercalated Archean komatiites and dacites sit above a thick footwall dacite unit in the host rock succession at the Black Swan Nickel Mine, north of Kalgoorlie in the Yilgarn Craton, Western Australia. Both lithofacies occur in units that vary in scale from laterally extensive at the scale of the mine lease to localized, thin, irregular bodies, from > 100 m thick to only centimetres thick. Some dacites are only slightly altered and deformed, and are interpreted to post-date major deformation and alteration (late porphyries). However, the majority of the dacites display evidence of deformation, especially at contacts, and metamorphism, varying from silicification and chlorite alteration at contacts to pervasive low grade regional metamorphic alteration represented by common assemblages of chlorite, sericite and albite. Texturally, the dacites vary from entirely massive and coherent to partially brecciated to totally brecciated. Strangely, some dacites are coherent at the margins and brecciated internally. Breccia textures vary from cryptically defined, to blocky, closely packed, in situ jig-saw fit textures with secondary minerals in fractures between clasts, to more apparent matrix rich textures with round clast forms, giving apparent conglomerate textures. Some clast zones have multi-coloured clasts, giving the impression of varied provenance. Strangely however, all these textural variants have gradational relationships with each other, and no bedding or depositional structures are present. This indicates that all textures have an in situ origin. The komatiites are generally altered and pervasively carbonate veined. Preservation of original textures is patchy and local, but includes coarse adcumulate, mesocumulate, orthocumulate, crescumulate-harrisite and occasionally spinifex textures. Where original contacts between komatiites and dacites are preserved intact (i.e. not sheared or overprinted by alteration), the komatiites have chilled margins, whereas the dacites do not. The margins of the dacites are commonly silicified, and inclusions of dacite occur in komatiite, even at the top contacts of komatiite units, but komatiite clasts do not occur in the dacites. The komatiites therefore were emplaced as sills into the dacites, and the intercalated relationships are interpreted as intrusive. The brecciation and alteration in the dacites are interpreted as being largely due to hydraulic fracturing and alteration induced by contact metamorphic effects and hydrothermal alteration deriving from the intrusion of komatiites into the felsic pile. The absence of autobreccia and hyaloclastite textures in the dacites suggest that they were emplaced as an earlier intrusive (sill?) complex at a high level in the crust.

Integrating crowd-behavior modeling into military simulation using game technology

Crowds of noncombatants play a large and increasingly recognized role in modern military operations and often create substantial difficulties for the combatant forces involved. However, realistic models of crowds are essentially absent from current military simulations. To address this problem, the authors are developing a crowd simulation capable of generating crowds of noncombatant civilians that exhibit a variety of realistic individual and group behaviors at differing levels of fidelity. The crowd simulation is interoperable with existing military simulations using a standard, distributed simulation architecture. Commercial game technology is used in the crowd simulation to model both urban terrain and the physical behaviors of the human characters that make up the crowd. The objective of this article is to present the design and development process of a simulation that integrates commercially available game technology with current military simulations to generate realistic and believable crowd behavior.