Asphalt concrete surfaces macrotexture determination from still images

Road surface macrotexture is identified as one of the factors contributing to the surface's skid resistance. Existing methods of quantifying the surface macrotexture, such as the sand patch test and the laser profilometer test, are either expensive or intrusive, requiring traffic control. High-resolution cameras have made it possible to acquire good quality images from roads for the automated analysis of texture depth. In this paper, a granulometric method based on image processing is proposed to estimate road surface texture coarseness distribution from their edge profiles. More than 1300 images were acquired from two different sites, extending to a total of 2.96 km. The images were acquired using camera orientations of 60 and 90 degrees. The road surface is modeled as a texture of particles, and the size distribution of these particles is obtained from chord lengths across edge boundaries. The mean size from each distribution is compared with the sensor measured texture depth obtained using a laser profilometer. By tuning the edge detector parameters, a coefficient of determination of up to R2 = 0.94 between the proposed method and the laser profilometer method was obtained. The high correlation is also confirmed by robust calibration parameters that enable the method to be used for unseen data after the method has been calibrated over road surface data with similar surface characteristics and under similar imaging conditions.

An examination of monotony and hypovigilance, independent of fatigue : relevance to road safety

Driving is a vigilance task, requiring sustained attention to maintain performance and avoid crashes. Hypovigilance (i.e., marked reduction in vigilance) while driving manifests as poor driving performance and is commonly attributed to fatigue (Dinges, 1995). However, poor driving performance has been found to be more frequent when driving in monotonous road environments, suggesting that monotony plays a role in generating hypovigilance (Thiffault & Bergeron, 2003b). Research to date has tended to conceptualise monotony as a uni-dimensional task characteristic, typically used over a prolonged period of time to facilitate other factors under investigation, most notably fatigue. However, more often than not, more than one exogenous factor relating to the task or operating environment is manipulated to vary or generate monotony (Mascord & Heath, 1992). Here we aimed to explore whether monotony is a multi-dimensional construct that is determined by characteristics of both the task proper and the task environment. The general assumption that monotony is a task characteristic used solely to elicit hypovigilance or poor performance related to fatigue appears to have led to there being little rigorous investigation into the exact nature of the relationship. While the two concepts are undoubtedly linked, the independent effect of monotony on hypovigilance remains largely ignored. Notwithstanding, there is evidence that monotony effects can emerge very early in vigilance tasks and are not necessarily accompanied by fatigue (see Meuter, Rakotonirainy, Johns, & Wagner, 2005). This phenomenon raises a largely untested, empirical question explored in two studies: Can hypovigilance emerge as a consequence of task and/or environmental monotony, independent of time on task and fatigue? In Study 1, using a short computerised vigilance task requiring responses to be withheld to infrequent targets, we explored the differential impacts of stimuli and task demand manipulations on the development of a monotonous context and the associated effects on vigilance performance (as indexed by respone errors and response times), independent of fatigue and time on task. The role of individual differences (sensation seeking, extroversion and cognitive failures) in moderating monotony effects was also considered. The results indicate that monotony affects sustained attention, with hypovigilance and associated performance worse in monotonous than in non-monotonous contexts. Critically, performance decrements emerged early in the task (within 4.3 minutes) and remained consistent over the course of the experiment (21.5 minutes), suggesting that monotony effects can operate independent of time on task and fatigue. A combination of low task demands and low stimulus variability form a monotonous context characterised by hypovigilance and poor task performance. Variations to task demand and stimulus variability were also found to independently affect performance, suggesting that monotony is a multi-dimensional construct relating to both task monotony (associated with the task itself) and environmental monotony (related to characteristics of the stimulus). Consequently, it can be concluded that monotony is multi-dimensional and is characterised by low variability in stimuli and/or task demands. The proposition that individual differences emerge under conditions of varying monotony with high sensation seekers and/or extroverts performing worse in monotonous contexts was only partially supported. Using a driving simulator, the findings of Study 1 were extended to a driving context to identify the behavioural and psychophysiological indices of monotony-related hypovigilance associated with variations to road design and road side scenery (Study 2). Supporting the proposition that monotony is a multi-dimensional construct, road design variability emerged as a key moderating characteristic of environmental monotony, resulting in poor driving performance indexed by decrements in steering wheel measures (mean lateral position). Sensation seeking also emerged as a moderating factor, where participants high in sensation seeking tendencies displayed worse driving behaviour in monotonous conditions. Importantly, impaired driving performance was observed within 8 minutes of commencing the driving task characterised by environmental monotony (low variability in road design) and was not accompanied by a decline in psychophysiological arousal. In addition, no subjective declines in alertness were reported. With fatigue effects associated with prolonged driving (van der Hulst, Meijman, & Rothengatter, 2001) and indexed by drowsiness, this pattern of results indicates that monotony can affect driver vigilance, independent of time on task and fatigue. Perceptual load theory (Lavie, 1995, 2005) and mindlessness theory (Robertson, Manly, Andrade, Baddley, & Yiend, 1997) provide useful theoretical frameworks for explaining and predicting monotony effects by positing that the low load (of task and/or stimuli) associated with a monotonous task results in spare attentional capacity which spills over involuntarily, resulting in the processing of task-irrelevant stimuli or task unrelated thoughts. That is, individuals – even when not fatigued - become easily distracted when performing a highly monotonous task, resulting in hypovigilance and impaired performance. The implications for road safety, including the likely effectiveness of fatigue countermeasures to mitigate monotony-related driver hypovigilance are discussed.

The Drinking Expectancy Questionnaire for Men who have Sex with Men (DEQ-MSM): A measure of substance-related beliefs

Introduction and Aims. Alcohol expectancies are associated with drinking behaviour and post-drinking use thoughts, feelings and behaviours. The expectancies held by specific cultural or sub-cultural groups have rarely been investigated. This research maps expectancies specific to gay and other men who have sex with men (MSM) and their relationship with substance use. This study describes the specific development of a measure of such beliefs for alcohol, the Drinking Expectancy Questionnaire for Men who have Sex with Men (DEQ-MSM). Design and Methods. Items selected through a focus group and interviews were piloted on 220 self-identified gay or other MSM via an online questionnaire. Results. Factor analysis revealed three distinct substance reinforcement domains ('Cognitive impairment', 'Sexual activity' and 'Social and emotional facilitation'). These factors were associated with consumption patterns of alcohol, and in a crucial test of discriminant validity were not associated with the consumption of cannabis or stimulants. Similarities and differences with existing measures will also be discussed. Discussion and Conclusions. The DEQ-MSM represents a reliable and valid measure of outcome expectancies, related to alcohol use among MSM, and represents an important advance as no known existing alcohol expectancy measure, to date, has been developed and/or normed for use among this group. Future applications of the DEQ-MSM in health promotion, clinical settings and research may contribute to reducing harm associated with alcohol use among MSM, including the development of alcohol use among young gay men.

Towards testing the eclectic paradigm on multinational contracting: an approach to reviewing and analysing secondary data

In response to the need to leverage private finance and the lack of competition in some parts of the Australian public sector major infrastructure market, especially in very large economic infrastructure procured using Pubic Private Partnerships, the Australian Federal government has demonstrated its desire to attract new sources of in-bound foreign direct investment (FDI) into the Australian construction market. This paper aims to report on progress towards an investigation into the determinants of multinational contractors’ willingness to bid for Australian public sector major infrastructure projects and which is designed to give an improved understanding of matters surrounding FDI into the Australian construction sector. This research deploys Dunning’s eclectic theory for the first time in terms of in-bound FDI by multinational contractors and as head contractors bidding for Australian major infrastructure public sector projects. Elsewhere, the authors have developed Dunning’s principal hypothesis associated with his eclectic framework in order to suit the context of this research and to address a weakness arising in Dunning’s principal hypothesis that is based on a nominal approach to the factors in the eclectic framework and which fail to speak to the relative explanatory power of these factors. In this paper, an approach to reviewing and analysing secondary data, as part of the first stage investigation in this research, is developed and some illustrations given, vis-à-vis the selected sector (roads, bridges and tunnels) in Australia (as the host location) and using one of the selected home countries (Spain). In conclusion, some tentative thoughts are offered in anticipation of the completion of the first stage investigation - in terms of the extent to which this first stage based on secondary data only might suggest the relative importance of the factors in the eclectic framework. It is noted that more robust conclusions are expected following the future planned stages of the research and these stages including primary data are briefly outlined. Finally, and beyond theoretical contributions expected from the overall approach taken to developing and testing Dunning’s framework, other expected contributions concerning research method and practical implications are mentioned.

Thinking feeling

In “Thinking Feeling” a camera zooms in and around an animated constellation of words. There are ten words, each repeated one hundred times. The individual words independently pulse and orbit an invisible nucleus. The slow movements of the words and camera are reinforced by an airy, synthesised soundtrack. Over time, various phrasal combinations form and dissolve on screen. A bit like forcing oneself to sleep, “Thinking Feeling” picks at that fine line between controlling and letting go of thoughts. It creates small mantric loops that slip in and out of focus, playing with the liminal zones between the conscious and unconscious, between language and sensation, between gripping and releasing, and between calm and irritation.

Estimating the loading condition of a diesel engine using instantaneous angular speed analysis

Continuing monitoring of diesel engine performance is critical for early detection of fault developments in the engine before they materialize and become a functional failure. Instantaneous crank angular speed (IAS) analysis is one of a few non intrusive condition monitoring techniques that can be utilized for such tasks. In this experimental study, IAS analysis was employed to estimate the loading condition of a 4-stroke 4-cylinder diesel engine in a laboratory condition. It was shown that IAS analysis can provide useful information about engine speed variation caused by the changing piston momentum and crankshaft acceleration during the engine combustion process. It was also found that the major order component of the IAS spectrum directly associated with the engine firing frequency (at twice the mean shaft revolution speed) can be utilized to estimate the engine loading condition regardless of whether the engine is operating at normal running conditions or in a simulated faulty injector case. The amplitude of this order component follows a clear exponential curve as the loading condition changes. A mathematical relationship was established for the estimation of the engine power output based on the amplitude of the major order component of the measured IAS spectrum.

Estimating the loading condition of a diesel engine using instantaneous angular speed analysis

Continuing monitoring of diesel engine performance is critical for early detection of fault developments in the engine before they materialize and become a functional failure. Instantaneous crank angular speed (IAS) analysis is one of a few non intrusive condition monitoring techniques that can be utilized for such tasks. In this experimental study, IAS analysis was employed to estimate the loading condition of a 4-stroke 4-cylinder diesel engine in a laboratory condition. It was shown that IAS analysis can provide useful information about engine speed variation caused by the changing piston momentum and crankshaft acceleration during the engine combustion process. It was also found that the major order component of the IAS spectrum directly associated with the engine firing frequency (at twice the mean shaft revolution speed) can be utilized to estimate the engine loading condition regardless of whether the engine is operating at normal running conditions or in a simulated faulty injector case. The amplitude of this order component follows a clear exponential curve as the loading condition changes. A mathematical relationship was established for the estimation of the engine power output based on the amplitude of the major order component of the measured IAS spectrum.

Implementation of ICD-11... perspectives from the Australian Bureau of Statistics

As the development of ICD-11 progresses, the Australian Bureau of Statistics is beginning to consider what will be required to successfully implement the new version of the classification. This paper will present early thoughts on the following: building understanding amongst the user community of upcoming changes and the implications of those changes; the need for training of coders and data users; development of analytical methods and conduct of comparability studies; processes to test, accept and implement new or updated coding software; assessment of coding quality; changes to data analyses and reporting processes; updates to regular publications; and assessing the resources required for successful implementation.

How design of the physical environment impacts early learning : educators and parents perspectives

This research explores the quality and importance of the physical environment of two early learning centres on the Sunshine Coast in Queensland, utilising qualitative interviews with parents (n=4) and educators (n=4) to understand how design might impact on children’s development and a quantitative rating (the Early Childhood Physical Environment Rating Scale; ECPERS) to assess the quality of the physical built environment and infrastructure. With an average ECPERS quality rating, thematic analysis of the interviews revealed that educators and parents viewed the physical environment as important to a child’s development, although the quality of staff was predominant. Early learning centres should be ‘homely’, inviting, bright and linked to the outdoors, with participants describing how space “welcomes the child, makes them feel safe and encourages learning”. Four key themes characterised views: Emotional Connection (quality of staff and physical environment), Experiencing Design (impact of design on child development), Hub for Community Integration (relationships and resources) and Future Vision (ideal physical environment, technology and ratings). With participants often struggling to clearly articulate their thoughts on design issues, a collaborative and jargon-free approach to designing space is required. These findings will help facilitate discussion about the role and design of the physical environment in early childhood centres, with the tangible examples of ‘ideal space’ enhancing communication between architects and educators about how best to design and reconfigure space to enhance learning outcomes.

Substance-related expectancies among men who have sex with men : development of psychometric tools to predict unprotected sexual activity

Significant research has demonstrated direct and indirect associations between substance use and sexual behaviour. Substance use is related to sexual risk-taking and HIV seroconversion among some substance-using MSM. It remains unclear what factors mediate or underlie this relationship, and which substances are associated with greater harm. Substance-related expectancies are hypothesised as potential mechanisms. A conceptual model based on social-cognitive theory was tested, which explores the role of demographic factors, substance use, substance-related expectancies and novelty-seeking personality characteristics in predicting unprotected anal intercourse (UAI) while under the influence, across four commonly used substance types. Phase 1, a qualitative study (N = 20), explored how MSM perceive the effects of substance use on their thoughts, feelings and behaviours, including sexual behaviours. Information was attained through discussion and interviews, resulting in the establishment of key themes. Results indicated MSM experience a wide range of reinforcing aspects associated with substance use. General and specific effects were evident across substance types, and were associated with sexual behaviour and sexual risk-taking. Phase 2 consisted of developing a comprehensive profile of substance-related expectancies for MSM (SEP-MSM) regarding alcohol, cannabis, amyl nitrite and stimulants that possessed sound psychometric properties and was appropriate for use among this group. A cross-sectional questionnaire with 249 participants recruited through gay community networks was used to validate these measures, and involved online data collection, participants rating expectancy items and subsequent factor analysis. Results indicated expectancies can be reliably assessed, and predicted substance use patterns. Phase 3 examined demographic factors, substance use, substance-related expectancies, and novelty-seeking traits among another community sample of MSM (N = 277) throughout Australia, in predicting UAI while under the influence. Using a cross-sectional design, participants were recruited through gay community networks and completed online questionnaires. The SEP-MSM, and associated substance use, predicted UAI. This research extends social-cognitive theory regarding sexual behaviour, and advances understanding of the role of expectancies associated with substance use and sexual risk-taking. Future applications of the SEP-MSM in health promotion, prevention, clinical interventions and research are likely to contribute to reducing harm associated with substance-using MSM (e.g., HIV transmission).

Laying the Groundwork for the Successful Deployment of Communication Interception Technology (CIT) in Modern Policing

With the growth and development of communication technology there is an increasing need for the use of interception technologies in modern policing. Law enforcement agencies are faced with increasingly sophisticated and complex criminal networks that utilise modern communication technology as a basis for their criminal success. In particular, transnational organised crime (TOC) is a diverse and complicated arena, costing global society in excess of $3 trillion annually, a figure that continues to grow (Borger, 2007) as crime groups take advantage of disappearing borders and greater profit markets. However, whilst communication can be a critical success factor for criminal enterprise it is also a key vulnerability. It is this vulnerability that the use of CIT, such as phone taps or email interception, can exploit. As such, law enforcement agencies now need a method and framework that allows them to utilise CIT to combat these crimes efficiently and successfully. This paper provides a review of current literature with the specific purpose of considering the effectiveness of CIT in the fight against TOC and the groundwork that must be laid in order for it to be fully exploited. In doing so, it fills an important gap in current research, focusing on the practical implementation of CIT as opposed to the traditional area of privacy concerns that arise with intrusive methods of investigation. The findings support the notion that CIT is an essential intelligence gathering tool that has a strong place within the modern policing arena. It identifies that the most effective use of CIT is grounded within a proactive, intelligence‐led framework and concludes that in order for this to happen Australian authorities and law enforcement agencies must re‐evaluate and address the current legislative and operational constraints placed on the use of CIT and the culture that surrounds intelligence in policing.

Towards an evolutionary perspective for human information behavior: An exploratory study

Purpose - Since the beginning of human existence, humankind has sought, organized and used information as it evolved patterns and practices of human information behaviors. However, the field of human information behavior (HIB) has not heretofore pursued an evolutionary understanding of information behavior. The goal of this exploratory study is to provide insight about the information behavior of various individuals from the past to begin the development of an evolutionary perspective for our understanding of HIB. Design/methodology/approach - This paper presents findings from a qualitative analysis of the autobiographies and personal writings of several historical figures, including Napoleon Bonaparte, Charles Darwin, Giacomo Casanova and others. Findings - Analysis of their writings shows that these persons of the past articulated aspects of their HIB's, including information seeking, information organization and information use, providing tangible insights into their information-related thoughts and actions. Practical implications - This paper has implications for expanding the nature of our evolutionary understanding of information behavior and provides a broader context for the HIB research field. Originality/value - This the first paper in the information science field of HIB to study the information behavior of historical figures and begin to develop an evolutionary framework for HIB research. © Emerald Group Publishing Limited.

Connecting Diversity : Paradoxes of Multicultural Australia

Commissioned by SBS, and published in March 2006, Connecting Diversity: Paradoxes of Multicultural Australia is a follow-up study to SBS’s 2002 report, Living Diversity: Australia’s Multicultural Future. The attitudes of many younger Australians from culturally diverse backgrounds reveal paradoxes about Australian multiculturalism today. This report sheds light on their views, experiences and expectations and the role of media in their lives. Younger, culturally and linguistically diverse Australians are often the subject of mediafanned controversy about disaffection, ‘ethnic gangs’ and cultural isolation. While these controversies tend to be localised – Cronulla, Inala or Bankstown – Connecting Diversity tells a national and quite different story. This research builds upon the findings of the 2002 report, Living Diversity: Australia’s Multicultural Future, which challenged common assumptions about contemporary multicultural Australia. In an era of fragmenting media and assumed political apathy, Connecting Diversity further examines many of the findings of the earlier study, with a new focus on younger people, cultural identity and media use. Connecting Diversity reveals individual experiences and often contradictory ideas about media and diversity in Australia. Disjunctions appear to exist between an individual’s experience and their thoughts about Australia’s national identity. Multiculturalism is valued for broadening the appreciation of difference, yet this support can coexist with concerns about perceived segregation, usually ‘elsewhere’ in Australia. Younger people tend to be more comfortable with cultural difference than previous generations and cite their own diverse network of friends as one of the reasons for this. Even so, some describe experiences of racism that engender a feeling of exclusion from ‘mainstream’ society. In their everyday lives, social relationships are navigated through regular and familiar connections on the one hand, and experiences and expressions of disconnection on the other. Racism and tolerance may be expressed almost simultaneously. These disconnections are often managed through ‘practical tolerance',allowing them to negotiate these apparent contradictions. The connections can be based simultaneously on such things as work, family,religion, friendships or location. The result is a multilayered sense of personal belonging and community connection. A large number of respondents in these focus groups expressed frustration at the failings of media, especially news and current affairs coverage, yet spoke enthusiastically about the accessibility and range of media compared to what was available to previous generations. In their many forms, media remain a key ingredient of self-identification among younger Australians of culturally diverse backgrounds who are especially cynical about media and disillusioned by their perceived inability to influence issues that are important to them. These findings reveal that although they may be cynical about media messages, these younger Australians are looking for connection through media and are seeking ways to participate in meaningful ways. This raises questions about the possibilities for media to empower younger people to play a part in genuine cultural democracy. By capturing the attitudes of Australians of culturally diverse backgrounds under the age of 40, Connecting Diversity: Paradoxes of Multicultural Australia provides an insight into social trends and the generational and cultural changes that are now shaping Australia.

From frustration to satisfaction : using NLP to improve self-expression

How often do students tell us they are frustrated at being unable to express themselves, and more specifically, their true, deep and complex thoughts? We reassure them that language learning takes time, and that, with concerted effort, they will learn English. And mostly they do, but being able to fulfil various forms of academic assessment does not necessarily mean that non-native speakers can express, to their complete satisfaction, the depth and subtleties of their true thoughts and feelings such as is possible in their own language. Neuro-linguistic programming (NLP) is making an impact on English language teaching, and may just offer one solution to this problem. By drawing upon the notion of preferred representational systems, this paper suggests that expressing oneself with satisfaction may be as simple as understanding how one processes and stores information.

Development of a high-speed sensing and detection system for automatic removal of packages with leaky seals from a high-speed food processing and packaging line

Contamination of packaged foods due to micro-organisms entering through air leaks can cause serious public health issues and cost companies large amounts of money due to product recalls, consumer impact and subsequent loss of market share. The main source of contamination is leaks in packaging which allow air, moisture and microorganisms to enter the package. In the food processing and packaging industry worldwide, there is an increasing demand for cost effective state of the art inspection technologies that are capable of reliably detecting leaky seals and delivering products at six-sigma. The new technology will develop non-destructive testing technology using digital imaging and sensing combined with a differential vacuum technique to assess seal integrity of food packages on a high-speed production line. The cost of leaky packages in Australian food industries is estimated close to AUD $35 Million per year. Contamination of packaged foods due to micro-organisms entering through air leaks can cause serious public health issues and cost companies large sums of money due to product recalls, compensation claims and loss of market share. The main source of contamination is leaks in packaging which allow air, moisture and micro-organisms to enter the package. Flexible plastic packages are widely used, and are the least expensive form of retaining the quality of the product. These packets can be used to seal, and therefore maximise, the shelf life of both dry and moist products. The seals of food packages need to be airtight so that the food content is not contaminated due to contact with microorganisms that enter as a result of air leakage. Airtight seals also extend the shelf life of packaged foods, and manufacturers attempt to prevent food products with leaky seals being sold to consumers. There are many current NDT (non-destructive testing) methods of testing the seal of flexible packages best suited to random sampling, and for laboratory purposes. The three most commonly used methods are vacuum/pressure decay, bubble test, and helium leak detection. Although these methods can detect very fine leaks, they are limited by their high processing time and are not viable in a production line. Two nondestructive in-line packaging inspection machines are currently available and are discussed in the literature review. The detailed design and development of the High-Speed Sensing and Detection System (HSDS) is the fundamental requirement of this project and the future prototype and production unit. Successful laboratory testing was completed and a methodical design procedure was needed for a successful concept. The Mechanical tests confirmed the vacuum hypothesis and seal integrity with good consistent results. Electrically, the testing also provided solid results to enable the researcher to move the project forward with a certain amount of confidence. The laboratory design testing allowed the researcher to confirm theoretical assumptions before moving into the detailed design phase. Discussion on the development of the alternative concepts in both mechanical and electrical disciplines enables the researcher to make an informed decision. Each major mechanical and electrical component is detailed through the research and design process. The design procedure methodically works through the various major functions both from a mechanical and electrical perspective. It opens up alternative ideas for the major components that although are sometimes not practical in this application, show that the researcher has exhausted all engineering and functionality thoughts. Further concepts were then designed and developed for the entire HSDS unit based on previous practice and theory. In the future, it would be envisaged that both the Prototype and Production version of the HSDS would utilise standard industry available components, manufactured and distributed locally. Future research and testing of the prototype unit could result in a successful trial unit being incorporated in a working food processing production environment. Recommendations and future works are discussed, along with options in other food processing and packaging disciplines, and other areas in the non-food processing industry.