Small and medium enterprises’ solution to improve on-site waste management in office building retrofit projects

Office building retrofit projects are increasingly more intensified as existing buildings are aging. At the same time, building owners and occupants are looking for environmentally sustainable products. These retrofit projects usually take place in center business district (CBDs) with on-site waste becoming one of the critical issues. Small and Medium Enterprises (SMEs) carry out most of the work in retrofit projects as subcontractors. Despite their large involvement, they often do not have adequate resources to deal with the specific technical challenges and project risks related to waste. Few research has been done on their performance of waste management operations. This paper identifies characteristics of on-site waste in office building retrofit projects. It examines the specific requirements for contractors to manage waste in the projects before exploring the existing performance of SMEs. By comparing requirements for SMEs and their potential areas for improvement, a framework is established for performance promotion of SMEs in on-site waste management of office building retrofit projects. The paper will raise the consciousness and commitment of SMEs as sub-contractors to waste management. It also explores ways of supporting SMEs for experience accumulation, performance promotion and project culture establishment towards effective and efficient on-site waste management in the growing sector of office building retrofit and upgrade.

Measuring export readiness using a multiple-item index

Since the 1970s the internationalisation process of firms has attracted wide research interest. One of the dominant explanations of firm internationalisation resulting from this research activity is the Uppsala stages model. In this paper, a pre-internationalisation phase is incorporated into the traditional Uppsala model to address the question: What are the antecedents of this model? Four concepts are proposed as the key components that define the experiential learning process underlying a firm’s pre-export phase: export stimuli, attitudinal/psychological commitment, resources and lateral rigidity. Through a survey of 290 Australian exporting and non-exporting small-medium sized firms, data relating to the four pre-internationalisation concepts is collected and an Export Readiness Index (ERI) is constructed through factor analysis. Using logistic regression, the ERI is tested as a tool for analysing export readiness among Australian SMEs.

"Criatividade na Educação e Formação de Talentos" (Creativity in Education and Development of Talent)

Historically, 'Creativity' has had a complex set of meanings. Not long ago, 'Creativity' had a kind of marginal or peripheral status, being seen as the province of a gifted few; in many cases it was associated almost exclusively with the arts and with artists. But these traditional attitudes to creativity are changing. Mainstream businesses are employing people with creative skills as diverse as writing, directing, graphic design and event management. So what we’re beginning to see is an innovation framework and creative content adding value not just to SMEs, but to traditional industries such as manufacturing and mining, and to wider service industries. And this is why Education is such an important element, particularly with a focus on innovation, and on creative people and the contributions they make across different parts of the economy.

Full Circle : a collection of prototypes

This exhibition engages with one of the key issues facing the fashion textiles industry in terms of future sustainability: that of the well being of fashion industry workers in Australia and New Zealand (people). This collection formed the basis of my honours dissertation (completed in New Zealand in 2008) which examines the contribution that design can make to sustainable manufacturing; particularly design for local production and consumption. An important aspect this work is the discussion of source, the work suggests that the made in China syndrome (in reference to the current state of over-consumerism in Australia and New Zealand) could be bought to a close through design to minimize waste and maximize opportunity for ‘people’: in this case both garment workers and the SMEs that employ them. The garments reflect the possibilities of focusing on a local approach that could be put into practice by a framework of SMEs that already exist. In addition the design process is highly transferrable and could be put into practice almost anywhere with minimal set up costs and a design ethos that progresses at the same pace as the skills of workers. This collection is a physical and conceptual embodiment of a source local/make local/sell local approach. The collection is an example of design that demonstrates that this is not an unrealistic ideal and is in fact possible through the development of a sustainable industry, in the sense of people, profit and planet, through adoption of a design process model that stops the waste at the source, by making better use of the raw materials and labour involved in making fashion garments. Although the focus of this research appears to centre on people and profit, this kind of source local/make local/sell local approach also has great benefits in terms of environmental sustainability.

Managing specialised knowledge in technopreneurial firms : the Australian experience

Technology-oriented young firms play an important role for innovation and commercialisation of new ideas. These firms are often founded by engineers, scientists or academics who posses great scientific/technological knowledge, but limited know-how in other aspects of managing a business including knowledge management. Successful managing and integrating their specialised knowledge is of particular importance when it comes to developing a new product or process. This article therefore focuses on the particularities of the knowledge management process in technopreneurial firms. Using a qualitative investigation from a sample of Australian SMEs, a number of key observations are derived which show the challenges of managing knowledge and how important knowledge management is as a management tool for R&D and innovation process in technology-oriented SMEs. Findings suggest that knowledge management and integration processes in these firms are very much project focused and mainly based on ad hoc and informal processes and not embedded within the overall organisational routines.

Safety leaders' perceptions of safety culture in a large Australian construction organisation

Safety culture in the construction industry is a growing research area. The unique nature of construction industry works – being project-based, varying in size and focus, and relying on a highly transient subcontractor workforce – means that safety culture initiatives cannot be easily translated from other industries. This paper reports on the first study in a three year collaborative industry and university research project focusing on safety culture practices and development in one of Australia’s largest global construction organisations. The first round of a modified Delphi method is reported, and describes the insights gained from 41 safety leaders’ perceptions and understandings of safety culture within the organisation. In-depth, semi-structured interviews were conducted, and will be followed by a quantitative perception survey with the same sample. Participants included Senior Executives, Corporate Managers, Project Managers, Safety Managers and Site Supervisors. Leaders’ definitions and descriptions of safety culture were primarily action-oriented and some confusion was evident due to the sometimes implicit nature of culture in organisations. Leadership was identified as a key factor for positive safety culture in the organisation, and there was an emphasis on leaders demonstrating commitment to safety, and being visible to the project-based workforce. Barriers to safety culture improvement were also identified, with managers raising diverse issues such as the transient subcontractor workforce and the challenge of maintaining safety as a priority in the absence of safety incidents, under high production pressures. This research is unique in that it derived safety culture descriptions from key stakeholders within the organisation, as opposed to imposing traditional conceptualisations of safety culture that are not customised for the organisation or the construction industry more broadly. This study forms the foundation for integrating safety culture theory and practice in the construction industry, and will be extended upon in future studies within the research program.

Why adopt now? Multiple case studies and survey studies comparing small, medium and large firms

While a number of factors have been highlighted in the innovation adoption literature, little is known about whether different factors are related to innovation adoption in differently-sized firms. We used preliminary case studies of small, medium and large firms to ground our hypotheses, which were then tested using a survey of 94 firms. We found that external stakeholder pressure and non-financial readiness were related to innovation adoption in SMEs; but that for large firms, adoption was related to the opportunity to innovate. It may be that the difficulties of adopting innovations, including both the financial cost and the effort involved, are too great for SMEs to overcome unless there is either a compelling need (external pressure) or enough in-house capability (non-financial readiness). This suggests that SMEs are more likely to have innovation “pushed” onto them while large firms are more likely to “pull” innovations when they have the opportunity.

The nature and prevalence of inter-organizational project ventures : evidence from a large scale field study in the Netherlands 2006-2009

There has recently been noted a rapid increase in research attention to projects that involve outside partners. Our knowledge of such inter-organizational projects, however, is limited. This paper reports large scale data from a repeated trend survey amongst 2000 SMEs in 2006 and 2009 that focused on inter-organizational project ventures. Our major findings indicate that the overall prevalence of inter-organizational project ventures remained significant and stable over time, even despite the economic crisis. Moreover, we find that these ventures predominantly solve repetitive rather than unique tasks and are embedded in prior relations between the partnering organizations. These findings provide empirical support for the recent claims that project management should pay more attention to inter-organizational forms of project organization, and suggest that the archetypical view of projects as being unique in every respect should be reconsidered. Both have important implications for project management, especially in the area of project-based learning.

Introducing a small and medium enterprises syllabi design: an enterprise systems hands-on approach

There is increasing attention to the importance of Enterprise Systems (ES) and Information Systems (IS) for Small and Medium Enterprises (SMEs). The same attention must be addressed in IS graduate curriculum. Studies reveal that despite healthy demand from the industry for IS management expertise, most IS graduates are ill-equipped to meet the challenges of modern organizations. The majority of contemporary firms, represented by SMEs, seek employees with a balance of business process knowledge and ES software skills. This article describes a curriculum that teaches Information Technology (IT) and IS managementconcepts in a SMEs context. The curriculum conceptualises a ‘learn-by-doing’ approach, to provide business process and ES software specific knowledge for its students. The approach recommends coverage of traditional content related to SMEs’’ operations, strategies, IT investment and management issues while providing an increased focus on strategic use of enterprise IT. The study addresses to an extent, the perennial challenge of updating IS curriculum, given the rapid pace of technological change.

Make-buy decisions in the face of technological change: does industry clockspeed matter?

Some evidence in the area of make-buy decisions for new technologies suggests that it is a good idea for a company to pursue a fairly rigorous ''make'' policy in the early days of a potentially disruptive innovation. Other studies prescribe exactly the opposite, promoting instead a ''buy'' strategy. This paper seeks to bridge the gap between these perspectives by suggesting that both strategies are valid, but that they are most successfully applied in different market environments. The ''make'' prescription may be more suited to either extremely fast or extremely slow rates of technological change, while a ''buy'' strategy might be more appropriate in market sectors where technologies evolve at a medium pace. This paper highlights the importance of industry clockspeed and supplier relationships in make-buy decisions for new technologies, and puts forward two new hypotheses that require empirical testing.

A model of organizational innovation implementation effectiveness in small to medium firms

The present study aims to validate the current best-practice model of implementation effectiveness in small and mid-size businesses. Data from 135 organizations largely confirm the original model across various types of innovation. In addition, we extended this work by highlighting the importance of human resources in implementation effectiveness and the consequences of innovation effectiveness on future adoption attitudes. We found that the availability of skilled employees was positively related to implementation effectiveness. Furthermore, organizations that perceived a high level of benefits from implemented innovations were likely to have a positive attitude towards future innovation adoption. The implications of our improvements to the original model of implementation effectiveness are discussed.

Safety culture research in the construction sector : interlocked projects in safety competency and safety effectiveness indicators

Safety culture is a concept that has long been accepted in high risk industries such as aviation, nuclear industries and mining, however, considerable research is now being undertaken within the construction sector, with varying levels of success. The current paper discusses three recent interlocked projects that have had some success in the Australian construction industry. The first project examined the development and implementation of a safety competency framework targeted at safety critical positions across first tier construction organisations. Combining qualitative and quantitative methods, the project: developed a matrix of safety critical positions (n=11) and safety managements tasks (SMTs; n=39); mapped the process steps for their acquisition and ongoing development; detailed the knowledge, skills and behaviours required for all SMTs; and outlined organisational cultural outcomes that could be anticipated in a successful implementation of the framework. The second project extended research on safety competency and leadership to develop behavioural guidelines for leaders to drive safety culture change down to second tier companies. This was designed to assist smaller construction companies to customise their own competency framework and develop implementation guidelines that match their aspirations and resources. The third interlocked project explored the use of safety effectiveness indicators (SEIs) as an industry-relevant assessment tool for reducing risk on construction sites. With direct linkages to safety competencies and safety management tasks, the SEIs are the next step towards an integrated safety cultural approach to safety and extend the concept of positive performance indicators (PPIs) by providing a valid, reliable, and user friendly measurement platform. Taken together, the results of the interlocked projects suggest that safety culture research has many potential benefits for the construction industry, particularly when research is conducted in partnership with industry stakeholders. Suggestions are made for future research, including further application and testing of the safety competency framework and aligning SEIs across construction projects of varying size, location and design.

Internet usage, internet intensity and international sales performance SME's : a structural model approach

There has been much written about the Internet’s potential to enhance international market growth opportunities for SME’s. However, the literature is vague as to how Internet usage and the application of Internet marketing also known as Internet marketing intensity has an impact on firm international market growth. This paper examines the level and role of the Internet in the international operations of a sample of 218 Australian SMEs with international customers. This study shows evidence of a statistical relationship between Internet usage and Internet marketing intensity, which in turn leads to international market growth, in terms of increased sales from new customers in new countries, new customers in existing countries and from existing customers.

International entrepreneurial values elicited through repertory test and laddering analysis : an SME, internet-enabled tourism perspective

This study explores the international entrepreneurial values influencing the intensity of Internet use in the internationalization process of small to medium sized enterprises (SMEs), within the Australian tourism industry. The findings point to a relationship between the values of international entrepreneurs and the inclination of the firm to develop and initiate international activity. And so, this study endeavors to offer insight into issues that remain unresolved in existing tourism and international entrepreneurship (IE) literature. Two effective but underutilized qualitative methods were used in this study to identify the values of international entrepreneurs. They are repertory test and laddering analysis.