Editor 3.0: Redesigining the YAWL user interface

It has long been a concern that the wider uptake of the YAWL environment may have been hindered by the usability issues identified in the current Process Editor. As a consequence, it was decided that the Editor be completely rewritten to address those usability limitations. The result has been the implementation of a new YAWL Process Editor architecture that creates a clear separation between the User Interface component layer and the core processing back end, facilitating the redesign of the default user interface. This new architecture also supports the development of multiple User Interface front ends for specific contexts that take advantage of the core capabilities the new Editor architecture has to offer.

Emerging technologies and the contextual and contingent experiences of ageing well

Based on a series of interviews of Australians between the ages of 55 and 75 this paper explores the relations between our participants’ attitudes towards and use of communication, social and tangible technologies and three relevant themes from our data: staying active, friends and families, and cultural selves. While common across our participants’ experiences of ageing, these themes were notable for the diverse ways they were experienced and expressed within individual lives and for the different roles technology was used for within each. A brief discussion of how the diversity of our ageing population implicates the design of emerging technologies ends the paper.

Very sensitive fiber Bragg grating accelerometer using transverse forces with an easy over-range protection and low cross axial sensitivity

The first fiber Bragg grating (FBG) accelerometer using direct transverse forces is demonstrated by fixing the FBG by its two ends and placing a transversely moving inertial object at its middle. It is very sensitive because a lightly stretched FBG is more sensitive to transverse forces than axial forces. Its resonant frequency and static sensitivity are analyzed by the classic spring-mass theory, assuming the axial force changes little. The experiments show that the theory can be modified for cases where the assumption does not hold. The resonant frequency can be modified by a linear relationship experimentally achieved, and the static sensitivity by an alternative method proposed. The principles of the over-range protection and low cross axial sensitivity are achieved by limiting the movement of the FBG and were validated experimentally. The sensitivities 1.333 and 0.634 nm/g were experimentally achieved by 5.29 and 2.83 gram inertial objects at 10 Hz from 0.1 to 0.4 g (g = 9.8 m/s 2), respectively, and their resonant frequencies were around 25 Hz. Their theoretical static sensitivities and resonant frequencies found by the modifications are 1.188 nm/g and 26.81 Hz for the 5.29 gram one and 0.784 nm/g and 29.04 Hz for the 2.83 gram one, respectively.

Visual front-end wars : Viola-Jones face detector vs Fourier Lucas-Kanade

The performance of visual speech recognition (VSR) systems are significantly influenced by the accuracy of the visual front-end. The current state-of-the-art VSR systems use off-the-shelf face detectors such as Viola- Jones (VJ) which has limited reliability for changes in illumination and head poses. For a VSR system to perform well under these conditions, an accurate visual front end is required. This is an important problem to be solved in many practical implementations of audio visual speech recognition systems, for example in automotive environments for an efficient human-vehicle computer interface. In this paper, we re-examine the current state-of-the-art VSR by comparing off-the-shelf face detectors with the recently developed Fourier Lucas-Kanade (FLK) image alignment technique. A variety of image alignment and visual speech recognition experiments are performed on a clean dataset as well as with a challenging automotive audio-visual speech dataset. Our results indicate that the FLK image alignment technique can significantly outperform off-the shelf face detectors, but requires frequent fine-tuning.

Organizational reframing : the commercialization of a public sector organization

The purpose of this study is to elaborate shared schema change theory in the context of the radical restructuring-commercialization of an Australian public infrastructure organization. Commercialization of the case organization imposed high individual and collective cognitive processing and emotional demands as organizational members sought to develop new shared schema. Existing schema change research suggests that radical restructuring renders pre-existing shared schema irrelevant and triggers new schema development through experiential learning (Balogun and Johnson, 2004). Focus groups and semi-structured interviews were conducted at four points over a three-year period. The analysis revealed that shared schema change occurred in three broad phases: (1) radical restructuring and aftermath; (2) new CEO and new change process schema, and: (3) large-group meeting and schema change. Key findings include: (1) radical structural change does not necessarily trigger new shared schema development as indicated in prior research; (2) leadership matters, particularly in framing new means-ends schema; (3) how change leader interventions are sequenced has an important influence on shared schema change, and; (4) the creation of facilitated social processes have an important influence on shared schema change.

Two-dimensional graphene heterojunctions: The tunable mechanical properties

We report the mechanical properties of different two-dimensional carbon heterojunctions (HJs) made from graphene and various stable graphene allotropes, including α-, β-, γ- and 6612-graphyne (GY), and graphdiyne (GDY). It is found that all HJs exhibit a brittle behaviour except the one with α-GY, which however shows a hardening process due to the formation of triple carbon rings. Such hardening process has greatly deferred the failure of the structure. The yielding of the HJs is usually initiated at the interface between graphene and graphene allotropes, and monoatomic carbon rings are normally formed after yielding. By varying the locations of graphene (either in the middle or at the two ends of the HJs), similar mechanical properties have been obtained, suggesting insignificant impacts from location of graphene allotropes. Whereas, changing the types and percentages of the graphene allotropes, the HJs exhibit vastly different mechanical properties. In general, with the increasing graphene percentage, the yield strain decreases and the effective Young’s modulus increases. Meanwhile, the yield stress appears irrelevant with the graphene percentage. This study provides a fundamental understanding of the tensile properties of the heterojunctions that are crucial for the design and engineering of their mechanical properties, in order to facilitate their emerging future applications in nanoscale devices, such as flexible/stretchable electronics.

Writing the oriental woman : an examination of the representation of Japanese women in contemporary Australian crime fiction

This study considers the challenges in representing women from other cultures in the crime fiction genre. The study is presented in two parts; an exegesis and a creative practice component consisting of a full length crime fiction novel, Batafurai. The exegesis examines the historical period of a section of the novel—post-war Japan—and how the area of research known as Occupation Studies provides an insight into the conditions of women during this period. The exegesis also examines selected postcolonial theory and its exposition of representations of the 'other' as a western construct designed to serve Eurocentric ends. The genre of crime fiction is reviewed, also, to determine how characters purportedly representing Oriental cultures are constricted by established stereotypes. Two case studies are examined to investigate whether these stereotypes are still apparent in contemporary Australian crime fiction. Finally, I discuss my own novel, Batafurai, to review how I represented people of Asian background, and whether my attempts to resist stereotype were successful. My conclusion illustrates how novels written in the crime fiction genre are reliant on strategies that are action-focused, rather than character-based, and thus often use easily recognizable types to quickly establish frameworks for their stories. As a sub-set of popular fiction, crime fiction has a tendency to replicate rather than challenge established stereotypes. Where it does challenge stereotypes, it reflects a territory that popular culture has already visited, such as the 'female', 'black' or 'gay' detective. Crime fiction also has, as one of its central concerns, an interest in examining and reinforcing the notion of societal order. It repeatedly demonstrates that crime either does not pay or should not pay. One of the ways it does this is to contrast what is 'good', known and understood with what is 'bad', unknown, foreign or beyond our normal comprehension. In western culture, the east has traditionally been employed as the site of difference, and has been constantly used as a setting of contrast, excitement or fear. Crime fiction conforms to this pattern, using the east to add a richness and depth to what otherwise might become a 'dry' tale. However, when used in such a way, what is variously eastern, 'other' or Oriental can never be paramount, always falling to secondary side of the binary opposites (good/evil, known/unknown, redeemed/doomed) at work. In an age of globalisation, the challenge for contemporary writers of popular fiction is to be responsive to an audience that demands respect for all cultures. Writers must demonstrate that they are sensitive to such concerns and can skillfully manage the tensions caused by the need to deliver work that operates within the parameters of the genre, and the desire to avoid offence to any cultural or ethnic group. In my work, my strategy to manage these tensions has been to create a back-story for my characters of Asian background, developing them above mere genre types, and to situate them with credibility in time and place through appropriate historical research.

Tensile properties of Si nanowires with faulted stacking layers

Semiconductor nanowires (NWs) show tremendous applications in micro/nano-electro-mechanical systems. In order to fulfill their promising applications, an understanding of the mechanical properties of NWs becomes increasingly important. Based on the large-scale molecular dynamics simulations, this work investigated the tensile properties of Si NWs with different faulted stacking layers. Different faulted stacking layers were introduced around the centre of the NW by the insertion or removal of certain stacking layers, inducing twins, intrinsic stacking fault, extrinsic stacking fault, and 9R crystal structure. Stress–strain curves obtained from the tensile deformation tests reveal that the presence of faulted stacking layers has induced a considerable decrease to the yield strength while only a minor decrease to Young's modulus. The brittle fracture phenomenon is observed for all tested NWs. In particular, the formation of a monatomic chain is observed for the perfect NW, which exists for a relatively wide strain range. For the defected NW, the monatomic chain appears and lasts shorter. Additionally, all defected NWs show a fracture area near the two ends, in contrast to the perfect NW whose fracture area is adjacent to the middle. This study provides a better understanding of the mechanical properties of Si NWs with the presence of different faulted stacking layers.

Effect of dangling chains on the structure and physical properties of a tightly crosslinked poly(ethylene glycol) network

Major imperfections in crosslinked polymers include loose or dangling chain ends that lower the crosslink d., thereby reducing elastic recovery and increasing the solvent swelling. These imperfections are hard to detect, quantify and control when the network is initiated by free radical reactions. As an alternative approach, the sol-​gel synthesis of a model poly(ethylene glycol) (PEG-​2000) network is described using controlled amts. of bis- and mono-​triethoxy silyl Pr urethane PEG precursors to give silsesquioxane (SSQ, R-​SiO1.5) structures as crosslink junctions with a controlled no. of dangling chains. The effect of the no. of dangling chains on the structure and connectivity of the dried SSQ networks has been detd. by step-​crystn. differential scanning calorimetry. The role that micelle formation plays in controlling the sol-​gel PEG network connectivity has been studied by dynamic light scattering of the bis- and mono-​triethoxy silyl precursors and the networks have been characterized by 29Si solid state NMR, sol fraction and swelling measurements. These show that the dangling chains will increase the mesh size and water uptake. Compared to other end-​linked PEG hydrogels, the SSQ-​crosslinked networks show a low sol fraction and high connectivity, which reduces solvent swelling, degree of crystallinity and the crystal transition temp. The increased degree of freedom in segment movement on the addn. of dangling chains in the SSQ-​crosslinked network facilitates the packing process in crystn. of the dry network and, in the hydrogel, helps to accommodate more water mols. before reaching equil.

Redistribution and technology adoption under uncertainty : a political economy perspective

We examine the role of politico-economic influences on macroeconomic performance within the framework of an endogenous growth model with costly technology adoption and uncertainty. The model is aimed at understanding the diversity in growth and inequality experiences across countries. Agents adopt either of two risky technologies, one of which is only available through financial intermediaries, who are able to alleviate some of this risk. The entry cost of financial intermediation depends on the proportion of government revenue that is allocated towards cost-reducing financial development expenditure, and agents vote on this proportion. The results show that agents at the top and bottom ends of the distribution prefer alternative means of re-distribution, thereby effectively blocking the allocation of resources towards cost-reducing financial development expenditure. Thus political factors have a role in delaying financial and capital deepening and economic development. Furthermore, the model provides a political-economy perspective on the Kuznets curve; uncertainty interacts with the political economy mechanism to produce transitional inequality patterns that, depending on initial conditions, can unearth the Kuznets-curve experience. Finally, the political outcomes are inefficient relative to policies aimed at maximizing the collective welfare of agents in the economy.

Hairpin RNAs derived from RNA polymerase II and polymerase III promoter-directed transgenes are processed differently in plants

RNA polymerase III (Pol III) as well as Pol II (35S) promoters are able to drive hairpin RNA (hpRNA) expression and induce target gene silencing in plants. siRNAs of 21 nt are the predominant species in a 35S Pol II line, whereas 24- and/or 22-nucleotide (nt) siRNAs are produced by a Pol III line. The 35S line accumulated the loop of the hpRNA, in contrast to full-length hpRNA in the Pol III line. These suggest that Pol II and Pol III-transcribed hpRNAs are processed by different pathways. One Pol III transgene produced only 24-nt siRNAs but silenced the target gene efficiently, indicating that the 24-nt siRNAs can direct mRNA degradation; specific cleavage was confirmed by 59 rapid amplification of cDNA ends (RACE). Both Pol II- and Pol III-directed hpRNA transgenes induced cytosine methylation in the target DNA. The extent of methylation is not correlated with the level of 21-nt siRNAs, suggesting that they are not effective inducers of DNA methylation. The promoter of a U6 transgene was significantly methylated, whereas the promoter of the endogenous U6 gene was almost free of cytosine methylation, suggesting that endogenous sequences are more resistant to de novo DNA methylation than are transgene constructs. Published by Cold Spring Harbor Laboratory Press. Copyright © 2008 RNA Society.

Humanities and social scientific research methods in porn studies

Porn studies researchers in the humanities have tended to use different research methods from those in social sciences. There has been surprisingly little conversation between the groups about methodology. This article presents a basic introduction to textual analysis and statistical analysis, aiming to provide for all porn studies researchers a familiarity with these two quite distinct traditions of data analysis. Comparing these two approaches, the article suggests that social science approaches are often strongly reliable – but can sacrifice validity to this end. Textual analysis is much less reliable, but has the capacity to be strongly valid. Statistical methods tend to produce a picture of human beings as groups, in terms of what they have in common, whereas humanities approaches often seek out uniqueness. Social science approaches have asked a more limited range of questions than have the humanities. The article ends with a call to mix up the kinds of research methods that are applied to various objects of study.

Learning processes in creative service teams : towards a dynamic systems theory

The fastest-growing segment of jobs in the creative sector are in those firms that provide creative services to other sectors (Hearn, Goldsmith, Bridgstock, Rodgers 2014, this volume; Cunningham 2014, this volume). There are also a large number of Creative Services (Architecture and Design, Advertising and Marketing, Software and Digital Content occupations) workers embedded in organizations in other industry sectors (Cunningham and Higgs 2009). Ben Goldsmith (2014, this volume) shows, for example, that the Financial Services sector is the largest employer of digital creative talent in Australia. But why should this be? We argue it is because ‘knowledge-based intangibles are increasingly the source of value creation and hence of sustainable competitive advantage (Mudambi 2008, 186). This value creation occurs primarily at the research and development (R and D) and the marketing ends of the supply chain. Both of these areas require strong creative capabilities in order to design for, and to persuade, consumers. It is no surprise that Jess Rodgers (2014, this volume), in a study of Australia’s Manufacturing sector, found designers and advertising and marketing occupations to be the most numerous creative occupations. Greg Hearn and Ruth Bridgstock (2013, forthcoming) suggest ‘the creative heart of the creative economy […] is the social and organisational routines that manage the generation of cultural novelty, both tacit and codified, internal and external, and [cultural novelty’s] combination with other knowledges […] produce and capture value’. 2 Moreover, the main “social and organisational routine” is usually a team (for example, Grabher 2002; 2004).

Second-order inelastic analysis of composite framed structures based on the refined plastic hinge method

Composite steel-concrete structures experience non-linear effects which arise from both instability-related geometric non-linearity and from material non-linearity in all of their component members. Because of this, conventional design procedures cannot capture the true behaviour of a composite frame throughout its full loading range, and so a procedure to account for those non-linearities is much needed. This paper therefore presents a numerical procedure capable of addressing geometric and material non-linearities at the strength limit state based on the refined plastic hinge method. Different material non-linearity for different composite structural components such as T-beams, concrete-filled tubular (CFT) and steel-encased reinforced concrete (SRC) sections can be treated using a routine numerical procedure for their section properties in this plastic hinge approach. Simple and conservative initial and full yield surfaces for general composite sections are proposed in this paper. The refined plastic hinge approach models springs at the ends of the element which are activated when the surface defining the interaction of bending and axial force at first yield is reached; a transition from the first yield interaction surface to the fully plastic interaction surface is postulated based on a proposed refined spring stiffness, which formulates the load-displacement relation for material non-linearity under the interaction of bending and axial actions. This produces a benign method for a beam-column composite element under general loading cases. Another main feature of this paper is that, for members containing a point of contraflexure, its location is determined with a simple application of the method herein and a node is then located at this position to reproduce the real flexural behaviour and associated material non-linearity of the member. Recourse is made to an updated Lagrangian formulation to consider geometric non-linear behaviour and to develop a non-linear solution strategy. The formulation with the refined plastic hinge approach is efficacious and robust, and so a full frame analysis incorporating geometric and material non-linearity is tractable. By way of contrast, the plastic zone approach possesses the drawback of strain-based procedures which rely on determining plastic zones within a cross-section and which require lengthwise integration. Following development of the theory, its application is illustrated with a number of varied examples.

Detouring to Grafton : the Sydney Botanic Gardens and the making of an Australian urban aesthetic

For the last seventy-five years Grafton has celebrated the Jacaranda Festival in late October. The festival commences in the town square with the crowning of the Jacaranda Queen and ends a week later with a parade through the town. The event is now a major regional tourist attraction that aims to bring locals and visitors together to celebrate everything purple. During this week one can attend the jacaranda children's party, the jacaranda maypole dancing, the jacaranda choral service or the jacaranda organ recital. Local businesses are encouraged to compete in the decorated window displays competition and everyone can join in the procession. The festival pays homage to the extraordinary display of beautiful jacaranda blooms which carpet the city during this time. The festival was inaugurated in 1935 when the slow growing jacarandas planted in the late nineteenth and early twentieth centuries were coming to maturity...