Identifying and characterising crashes of returning riders - a new approach

Surveys have identified that many older motorcyclists are returning riders but it is difficult to draw conclusions about their crash risk because of discrepancies in definitions and the inability to identify returning riders in official crash databases. Analyses of NSW crash data were undertaken in which returning riders were defined as aged 25 and over, holding a full licence 10 years prior to the crash, and not the registered operator of one or more motorcycles during the 5-10 years prior to the crash. Based on this definition, there were 472 riders in casualty crashes in 2005-09 who were returning riders (5.5% of riders aged 25 and over in casualty crashes) and the characteristics of their crashes were similar to those involving continuing riders. In contrast, crashes of new riders were more likely to have characteristics suggestive of relatively more riding in urban areas, probably for transport rather than recreation. More work is recommended to assess the validity of the definition to allow a better understanding of the effects of long periods away from riding on riding skills and crash risk.

Driver licensing experience of Korean Australians

Graduated licensing has been identified as the most promising approach to reducing the crash risk of novice drivers. However, research suggests that the effectiveness of graduated licensing appears to differ between urban and rural novice drivers and according to race or ethnicity. Extensive supervised driving practice as a learner driver is an important component of graduated licensing systems in Australia and many other countries. Earlier CARRS-Q research identified that falsification of logbooks was more common among particular demographic groups. The factors underlying this are not well understood. It is unclear whether this reflects a lack of understanding of the importance of supervised practice (given that it is not a licensing requirement in many countries of origin), or it reflects lack of access to vehicles and supervising drivers, or whether there is less respect for driver licensing requirements among some groups. It is possible that the importance of these factors may differ across ethnic groups, depending on socioeconomic factors and cultural attitudes to road safety. In an attempt to better understand these issues, this study presents some preliminary results of focus groups examining the experience of the Queensland Graduated Driver Licensing System by Korean-Australian novice drivers and their parents.

Australian domestic violence protection order legislation : a comparative quantitative content analysis of victim safety provisions

In Australia, protection orders are a key legal response to domestic violence, and are often viewed as a way of providing for victim safety. For instance, recently the joint Australian and New South Wales Law Reform Commissions recommended that a common core purpose of all state and territory domestic violence legislation should be ‘to ensure or maximise the safety and protection of persons who fear or experience family violence’ (2010:Recommendation 7-4). Drawing and building upon prior research in Australia and the United States (‘US’), this paper uses comparative quantitative content analysis to assess the victim safety focus of domestic violence protection order legislation in each Australian state and territory. The findings of this analysis show that the Northern Territory, South Australia and Victoria ‘stand out’ from the other jurisdictions, having the highest victim safety focus in their legislation. However, there remains sizeable scope for improvement in all Australian jurisdictions, in terms of the victim safety focus of their legislative provisions and the considerations of legislative inconsistency between jurisdictions.

How accurate is the identification of serious traffic injuries by Police? The concordance between Police and hospital reported traffic injuries

Police reported crash data are the primary source of crash information in most jurisdictions. However, the definition of serious injury within police-reported data is not consistent across jurisdictions and may not be accurate. With the Australian National Road Safety Strategy targeting the reduction of serious injuries, there is a greater need to assess the accuracy of the methods used to identify these injuries. A possible source of more accurate information relating to injury severity is hospital data. While other studies have compared police and hospital data to highlight the under-reporting in police-reported data, little attention has been given to the accuracy of the methods used by police to identify serious injuries. The current study aimed to assess how accurate the identification of serious injuries is in police-reported crash data, by comparing the profiles of transport-related injuries in the Queensland Road Crash Database with an aligned sample of data from the Queensland Hospital Admitted Patients Data Collection. Results showed that, while a similar number of traffic injuries were recorded in both data sets, the profile of these injuries was different based on gender, age, location, and road user. The results suggest that the ‘hospitalisation’ severity category used by police may not reflect true hospitalisations in all cases. Further, it highlights the wide variety of severity levels within hospitalised cases that are not captured by the current police-reported definitions. While a data linkage study is required to confirm these results, they highlight that a reliance on police-reported serious traffic injury data alone could result in inaccurate estimates of the impact and cost of crashes and lead to a misallocation of valuable resources.

Empirical study to investigate the difficulties of implementing safety practices in the repair and maintenance sector in Hong Kong

Repair, maintenance, minor alteration, and addition work (RMAA) has become more and more important in developed societies, but its safety performance is alarming. For example, RMAA projects accounted for 53.2% of the total construction market and the percentage of RMAA accidents to all construction accidents in the Hong Kong Special Administrative Region (HKSAR) increased considerably in 2007. The RMAA sector has a huge potential for safety improvement. This study aims to explore and evaluate the difficulties of implementing safety practices in RMAA work. The mixed methods approach was adopted, and semistructured interviews and a two-round Delphi survey were conducted for the data collection. Major difficulties were identified, including limited safety resources for small and medium enterprises (SMEs), difficulty in changing the mindset of RMAA workers, and difficulty in performing safety supervision. These obstacles for implementing safety practices in the RMAA sector, if successfully removed, could significantly improve the safety performance of the RMAA sector and the construction industry as a whole.

A model of workplace safety incorporating worker interactions and simple interventions

Although there was substantial research into the occupational health and safety sector over the past forty years, this generally focused on statistical analyses of data related to costs and/or fatalities and injuries. There is a lack of mathematical modelling of the interactions between workers and the resulting safety dynamics of the workplace. There is also little work investigating the potential impact of different safety intervention programs prior to their implementation. In this article, we present a fundamental, differential equation-based model of workplace safety that treats worker safety habits similarly to an infectious disease in an epidemic model. Analytical results for the model, derived via phase plane and stability analysis, are discussed. The model is coupled with a model of a generic safety strategy aimed at minimising unsafe work habits, to produce an optimal control problem. The optimal control model is solved using the forward-backward sweep numerical scheme implemented in Matlab.

Blood transfer devices for malaria rapid diagnostic tests : evaluation of accuracy, safety and ease of use

Background: Malaria rapid diagnostic tests (RDTs) are increasingly used by remote health personnel with minimal training in laboratory techniques. RDTs must, therefore, be as simple, safe and reliable as possible. Transfer of blood from the patient to the RDT is critical to safety and accuracy, and poses a significant challenge to many users. Blood transfer devices were evaluated for accuracy and precision of volume transferred, safety and ease of use, to identify the most appropriate devices for use with RDTs in routine clinical care. Methods: Five devices, a loop, straw-pipette, calibrated pipette, glass capillary tube, and a new inverted cup device, were evaluated in Nigeria, the Philippines and Uganda. The 227 participating health workers used each device to transfer blood from a simulated finger-prick site to filter paper. For each transfer, the number of attempts required to collect and deposit blood and any spilling of blood during transfer were recorded. Perceptions of ease of use and safety of each device were recorded for each participant. Blood volume transferred was calculated from the area of blood spots deposited on filter paper. Results: The overall mean volumes transferred by devices differed significantly from the target volume of 5 microliters (p < 0.001). The inverted cup (4.6 microliters) most closely approximated the target volume. The glass capillary was excluded from volume analysis as the estimation method used is not compatible with this device. The calibrated pipette accounted for the largest proportion of blood exposures (23/225, 10%); exposures ranged from 2% to 6% for the other four devices. The inverted cup was considered easiest to use in blood collection (206/ 226, 91%); the straw-pipette and calibrated pipette were rated lowest (143/225 [64%] and 135/225 [60%] respectively). Overall, the inverted cup was the most preferred device (72%, 163/227), followed by the loop (61%, 138/227). Conclusions: The performance of blood transfer devices varied in this evaluation of accuracy, blood safety, ease of use, and user preference. The inverted cup design achieved the highest overall performance, while the loop also performed well. These findings have relevance for any point-of-care diagnostics that require blood sampling.

The influence of fleet safety climate on occupational driver behaviours

The concepts of traffic safety culture and climate hold considerable impact on road safety outcomes. Data sourced from four Australian organisations revealed a five factor structure that was consistent with previous research, which were: management commitment; work demands; relationships; appropriateness of rules; and communication. Correlation and regression analyses were conducted to identify which aspects of fleet safety climate were related to driver behaviours. The findings suggest that organisations may be able to reduce the likelihood of employees engaging in unsafe driving behaviours as a result of fatigue or distractions through increasing aspects of fleet safety climate, including: management commitment; level of trust; safety communication; appropriateness of work demands; and appropriateness of safety policies and procedures. To assist practitioners in enhancing fleet safety climate and managing occupational road risks, recommendations are made based on these findings, such as fostering a supportive environment of mutual responsibility.

An observational study of conflicts between cyclists and pedestrians in the city centre

City centres have large volumes of pedestrians and motorised traffic and increases in walking and cycling could potentially lead to more pedestrians and cyclists being injured. In this study, observers recorded cyclist characteristics, number of pedestrians within 1m and 5m radius and type of conflict (none, pedestrian, vehicle) for 1,971 cyclists in 2010 and 2,551 cyclists in 2012 at six locations in the Brisbane Central Business District. Only 1.7% of cyclists were involved in conflicts with a motor vehicle or pedestrian and no collisions were observed. Increased odds of a pedestrian-cyclist conflict was associated with: male riders, riders not wearing correctly fastened helmets, riding on the footpath, higher pedestrian density (within 1m but not within 5m), morning peak and 2-4 pm (compared with 4-6 pm), two-way roads, roads with more lanes, higher speed limits, and yellow marked bicycle symbols on the road.

The unequal distribution of road trauma in China : understanding risk factors to improve public health

The World Health Organization identifies road trauma as a major public health issue in every country; most notably among low-to-middle income countries. More than 90% of all road fatalities occur in these countries, although they have only 48% of all registered vehicles [1]. Unprecedented focus has been placed on reducing the global road trauma burden through the United Nations Decade of Action for Road Safety (2011-2020). China is rapidly transitioning from a nation of bicycle riders and pedestrians to one where car ownership and use is increasing. This transition presents important public health, mobility, and safety challenges. Rapid motorisation has resulted in an increased road trauma burden, shouldered disproportionately among the population. Vulnerable road users (bicyclists, pedestrians, and motorcyclists) are of particular concern, representing 70% of all road-related fatalities [1]. Furthermore, those at greatest risk of sustaining a crash-related disability are: male, older, less educated, and earning a lower income [2] and residing in urban areas [3], with higher fatality rates in north-western poorer provinces [3]. Speeding is a key factor in road crashes in China [1, 4] and is one of two risk factors targeted in the Bloomberg Philanthropies-funded Global Road Safety Program operating in two Chinese cities over five year [5] to which the first author has provided expert advice. However, little evidence exists to help understand the factors underpinning speeding behaviour. Previous research conducted by the authors in Beijing and Hangzhou explored personal, social, and legal factors relating to speeding to assist in better understanding the motivations for non-compliance with speed limits. Qualitative and quantitative research findings indicated that speeding is relatively common, including self-reported travel speeds of greater than 30 km/hour above posted speed limits [6], and that the road safety laws and enforcement practices may, in some circumstances, contribute to this [7]. Normative factors were also evident; the role of friends, family members and driving instructors were influential. Additionally, using social networks to attempt to avoid detection and penalty was reported, thereby potentially reinforcing community perceptions that speeding is acceptable [8, 9]. The authors established strong collaborative links with the Chinese Academy of Sciences and Zhejiang Police College to conduct this research. The first author has worked in both institutions for extended time periods and recognises that research must include an understanding of culturally-relevant issues if road safety is to improve in China. Future collaborations to assist in enhancing our understanding of such issues are welcomed. References [1] World Health Organization. (2009). Global status report on road safety: Time for action; Geneva. [2] Chen, H., Du, W., & Li, N. (2013). The socioeconomic inequality in traffic-related disability among Chinese adults: the application of concentration index. Accident Analysis & Prevention, 55(101-106). [3] Wang, S. Y., Li, Y. H., Chi, G. B., Xiao, S. Y., Ozanne-Smith, J., Stevenson, M., & Phillips, M. (2008). Injury-related fatalities in China: an under-recognised public-health problem. The Lancet (British edition), 372(9651), 1765-1773. [4] He, J., King, M. J., Watson, B., Rakotonirainy, A., & Fleiter, J. J. (2013). Speed enforcement in China: National, provincial and city initiatives and their success. Accident Analysis & Prevention, 50, 282-288. [5] Bhalla, K., Li, Q., Duan, L., Wang, Y., Bishai, D., & Hyder, A. A. (2013). The prevalence of speeding and drink driving in two cities in China: a mid project evaluation of ongoing road safety interventions. Injury, 44, 49-56. doi:10.1016/S0020-1383(13)70213-4. [6] Fleiter, J. J., Watson, B., & Lennon, A. (2013). Awareness of risky behaviour among Chinese drivers. Peer-reviewed paper presented at 23rd Canadian Multidisciplinary Road Safety Conference, Montréal, Québec. [7] Fleiter, J. J., Watson, B., Lennon, A., King, M. J., & Shi, K. (2009). Speeding in Australia and China: A comparison of the influence of legal sanctions and enforcement practices on car drivers. Peer-reviewd paper presented at Australasian Road Safety Research Policing Education Conference, Sydney. [8] Fleiter, J. J., Watson, B., Lennon, A., King, M. J., & Shi, K. (2011). Social influences on drivers in China. Journal of the Australasian College of Road Safety, 22(2), 29-36. [9] Fleiter, J. J., Watson, B., Guan, M. Q., Ding, J. Y., & Xu, C. (2013). Characteristics of Chinese Drivers Attending a Mandatory Training Course Following Licence Suspension. Peer-reviewed paper presented at Road Safety on Four Continents, Beijing, China.

Incorporation of road safety into road management systems

Road collisions negatively affect the lives of hundreds of Canadians per year. Unfortunately, safety has been typically neglected from management systems. It is common to find that a great deal of effort has been devoted to develop and implement systems capable of achieving and sustaining good levels of condition. It is relatively recent that road safety has become an important objective. Managing a network of roads is not an easy task; it requires long, medium and short term plans to maintain, rehabilitate and upgrade aging assets, reduce and mitigate accident exposure, likelihood and severity. This thesis presents a basis for incorporating road safety into road management systems; two case studies were developed; one limited by available data and another from sufficient information. A long term analysis was used to allocate improvements for condition and safety of roads and bridges, at the network level. It was confirmed that a safety index could be used to obtain a first cut model; meanwhile potential for improvement which is a difference between observed and predicted number of accidents was capable of capturing the degree of safety of individual segments. It was found that the completeness of the system resulted in savings because of the economies obtained from trade-off optimization. It was observed that safety improvements were allocated at the beginning of the analysis in order to reduce the extent of issues, which translated into a systematic reduction of potential for improvement up to a point of near constant levels, which were hypothesized to relate to those unavoidable collisions from human error or vehicle failure.

Keeping international visitors safe on Australian beaches : informing the content of surf safety messages

In Australia, international tourists/visitors are one of the highest risk groups for drowning at beaches. Swimming in patrolled areas, between the flags, reduces the risk of drowning with most drownings occuring outside these areas. There is a need to understand beliefs which influence the extent to which international tourists/visitors intend to swim between the flags. The theory of planned behaviour (TPB) and, in particular, the indirect beliefs which underpin constructs in the model, represent a means of determining what factors influence this intention. The current study compared international visitors/tourists as having either low or high intentions to swim between the flags on a range of behavioural, normative, and control beliefs. A series of MANOVAs revealed significant differences between the groups in all three of the beliefs. The findings provide insight into potential foci for message content for use in educational campaigns aimed at keeping international visitors safe on Australian beaches.

Effect of mobile phone use and aggression on speed selection by young drivers : a driving simulator study

Aggressive driving has been associated with engagement in other risky driving behaviours, such as speeding; while drivers using their mobile phones have an increased crash risk, despite the tendency to reduce their speed. Research has amassed separately for mobile phone use and aggressive driving among younger drivers, however little is known about the extent to which these behaviours may function independently and in combination to influence speed selection behaviour. The main aim of the current study was to investigate the effect of driver aggression (measured by the Driving Anger Expression Inventory) and mobile phone use on speed selection by young drivers. The CARRS-Q advanced driving simulator was used to test the speed selection of drivers aged 18 to 26 years (N = 32) in a suburban (60kph zone) driving context. A 2 (level of driving anger expression: low, high) X 3 (mobile phone use condition: baseline, hands-free, hand-held) mixed factorial ANOVA was conducted with speed selection as the dependent variable. Results revealed a significant main effect for mobile phone use condition such that speed selection was lowest for the hand-held condition and highest for the baseline condition. Speed selection, however, was not significantly different across the levels of driving anger expression; nor was there a significant interaction effect between the mobile phone use and driving anger expression. As young drivers are over-represented in road crash statistics, future research should further investigate the combined impact of driver aggression and mobile phone use on speed selection.

From the bush to the burbs : a comparison of driver situation awareness at rural and urban railway level crossings

The problem of collisions between road users and trains at rail level crossings (RLXs) remains resistant to current countermeasures. One factor underpinning these collisions is poor Situation Awareness (SA) on behalf of the road user involved (i.e. not being aware of an approaching train). Although this is a potential threat at any RLX, the factors influencing SA may differ depending on whether the RLX is located in a rural or urban road environment. Despite this, there has been no empirical investigation regarding how road user SA might differ across distinct RLX environments. This knowledge is needed to establish the extent to which a uniform approach to RLX design and safety is acceptable. The aim of this paper is to investigate the differences in driver SA at rural versus urban RLXs. We present analyses of driver SA in both rural and urban RLX environments based on two recent on-road studies undertaken in Victoria, Melbourne. The findings demonstrate that driver SA is markedly different at rural and urban RLXs, and also that poor SA regarding approaching trains may be caused by different factors. The implications for RLX design and safety are discussed.

Disability due to road traffic crashes and the management of road safety in developing countries

Injury as a result of road traffic crashes is one of the most significant public health problems in developing countries. It intersects with disability as a development issue because a substantial proportion of people injured in road traffic crashes experience disability, both short term and long term. While there have been significant steps towards better management of road safety globally, especially in developing countries, the implications for road safety policy and practice of disability due road traffic crashes is not fully appreciated. In particular, qualitative information on the lived experience people with a long term disability as a result of a road traffic crash can inform better road safety policy and practice, as demonstrated in a case study from Thailand. The benefits of better policies and practices are likely to accrue to a wide range of road users, and to contribute to the achievement of sustainable development.