Experimental study of load-bearing cold-formed steel walls exposed to realistic design fires

This paper presents the details of full scale fire tests of LSF wall panels conducted using realistic fire time-temperature curves. Tests included eight LSF wall specimens of various configurations exposed to both parametric design and natural fire curves. Details of the fire test set-up, test procedure and the results including the measured time-temperature and deformation curves of LSF wall panels are presented along with wall stud failure modes and times. This paper also compares the structural and thermal behavioural characteristics of LSF wall studs with those based on the standard time-temperature curve. Finally, the stud failure times and temperatures are summarized for both standard and realistic design fire curves. This study provides the necessary test data to validate the numerical models of LSF wall panels and to undertake a detailed study into the structural and thermal performance of LSF wall panels exposed to realistic design fire curves.

Influences of molecular structure on co-crystallization of polypyridyl metal complexes.

Heteroleptic complexes of the type \[RuL2L′](PF6)2 (L, L′ = combinations of 1,10-phenanthroline (phen) and 2,2′-bipyridine (bipy)) were found to cocrystallize with \[Ni(phen)3](PF6)2 to produce cocrystals of \[Ni(phen)3]x\[RuL2L′]1–x(PF6)2. In this report we show that the ability of the complexes to cocrystallize is influenced by the number of common ligands between complexes in solution. Supramolecular selection is a phenomenon caused by molecular recognition through which cocrystals can grow from the same solution but contain different ratios of the molecular components. It was found that systems where L = phen displayed less supramolecular selection than systems where L = bipy. With increasing supramolecular selection, the composition of cocrystals was found to vary significantly from the initial relative concentration in the cocrystallizing solution, and therefore it was increasingly difficult to control the final composition of the resultant cocrystals. Consequently, modulation of concentration-dependent properties such as phase was also found to be less predictable with increasing supramolecular selection. Notwithstanding the complication afforded by the presence of supramolecular selection, our results reaffirm the robustness of the \[M(phen)3](PF6)2 structure because it was maintained even when ca. 90% of the complexes in the cocrystals were \[Ru(phen)(bipy)2](PF6)2, which in its pure form is not isomorphous with \[M(phen)3](PF6)2. Experiments between complexes without common ligands, i.e., \[Ru(bipy)3](PF6)2 cocrystallized with \[Ni(phen)3](PF6)2, were found to approach the limit to which molecular recognition processes can be confused into cocrystallizing different molecules to form single cocrystals. For these systems the result was the formation of block-shaped crystals skewered by a needle-shaped crystals.

Design democratisation and its understandings through the meaning of the word “design” in Portuguese colonised countries

This paper explores the literature and analyses the different uses and understandings of the word “design” in Portuguese colonised countries, using Brazil as the main example. It investigates the relationship between the linguistic existence of terms to define and describe “design” as an activity and field, and the roles and perceptions of Design by the general society. It also addresses the effects that the lack of a proper translation causes on the local community from a cultural point of view. The current perception of Design in Portuguese colonies is associated to two main aspects: linguistic and historical. Both of them differentiate the countries taken into consideration from other countries that have a different background. The changes associated to the meaning of “design” throughout the years, caused a great impact on the perceptions that people have about Design. On the other hand, the development of Design has also influenced the changes on the meaning of the term, as a result of the legacy from the colonisation period and also as a characteristic of the Portuguese language. Design has developed and reached a level of excellence in Portuguese colonised countries that competes with the most traditional Design cultures in the world. However, this level of Design is enmeshed into an elite belonging to universities and specialised markets, therefore Design is not democratised. The ultimate aim of this study is to promote discussions on how to make the discourse surrounding this area more accessible to people from non-English speaking countries that do not have the word “design” in their local language.

Rapid production of a plasmid DNA encoding a malaria vaccine candidate via amino-functionalized poly(GMA-co-EDMA) monolith

Malaria is a global health problem; an effective vaccine is urgently needed. Due to the relative poverty and lack of infrastructure in malaria endemic areas, DNA-based vaccines that are stable at ambient temperatures and easy to formulate have great potential. While attention has been focused mainly on antigen selection, vector design and efficacy assessment, the development of a rapid and commercially viable process to manufacture DNA is generally overlooked. We report here a continuous purification technique employing an optimized stationary adsorbent to allow high-vaccine recovery, low-processing time, and, hence, high-productivity. A 40.0 mL monolithic stationary phase was synthesized and functionalized with amino groups from 2-Chloro-N,N- diethylethylamine hydrochloride for anion-exchange isolation of a plasmid DNA (pDNA) that encodes a malaria vaccine candidate, VR1020-PyMSP4/5. Physical characterization of the monolithic polymer showed a macroporous material with a modal pore diameter of 750 nm. The final vaccine product isolated after 3 min elution was homogeneous supercoiled plasmid with gDNA, RNA and protein levels in keeping with clinical regulatory standards. Toxicological studies of the pVR1020-PyMSP4/5 showed a minimum endotoxin level of 0.28 EU/m.g pDNA. This cost-effective technique is cGMP compatible and highly scalable for the production of DNA-based vaccines in commercial quantities, when such vaccines prove to be effective against malaria. © 2008 American Institute of Chemical Engineers.

Towards the design of a scalable and commercially viable technique for plasmid purification using a methacrylate monolithic stationary phase

A monolithic stationary phase was prepared via free radical co-polymerization of ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA) with pore diameter tailored specifically for plasmid binding, retention and elution. The polymer was functionalized. with 2-chloro-N,N-diethylethylamine hydrochloride (DEAE-Cl) for anion-exchange purification of plasmid DNA (pDNA) from clarified lysate obtained from E. coli DH5α-pUC19 culture in a ribonuclease/ protease-free environment. Characterization of the monolithic resin showed a porous material, with 68% of the pores existing in the matrix having diameters above 300 nm. The final product isolated from a single-stage 5 min anion-exchange purification was a pure and homogeneous supercoiled (SC) pDNA with no gDNA, RNA and protein contamination as confirmed by ethidium bromide agarose gel electrophoresis (EtBr-AGE), enzyme restriction analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This non-toxic technique is cGMP compatible and highly scalable for production of pDNA on a commercial level.

Design thinking frameworks as transformative cross-disciplinary pedagogy

Final report for the Australian Government Office for Learning and Teaching. "This seed project ‘Design thinking frameworks as transformative cross-disciplinary pedagogy’ aimed to examine the way design thinking strategies are used across disciplines to scaffold the development of student attributes in the domain of problem solving and creativity in order to enhance the nation’s capacity for innovation. Generic graduate attributes associated with innovation, creativity and problem solving are considered to be amongst the most important of all targeted attributes (Bradley Review of Higher Education, 2009). The project also aimed to gather data on how academics across disciplines conceptualised design thinking methodologies and strategies. Insights into how design thinking strategies could be embedded at the subject level to improve student outcomes were of particular interest in this regard. A related aim was the investigation of how design thinking strategies could be used by academics when designing new and innovative subjects and courses." Case Study 3: QUT Community Engaged Learning Lab Design Thinking/Design Led Innovation Workshop by Natalie Wright Context "The author, from the discipline area of Interior Design in the QUT School of Design, Faculty of Creative Industries, is a contributing academic and tutor for The Community Engaged Learning Lab, which was initiated at Queensland University of Technology in 2012. The Lab facilitates university-wide service-learning experiences and engages students, academics, and key community organisations in interdisciplinary action research projects to support student learning and to explore complex and ongoing problems nominated by the community partners. In Week 3, Semester One 2013, with the assistance of co-lead Dr Cara Wrigley, Senior Lecturer in Design led Innovation, a Masters of Architecture research student and nine participating industry-embedded Masters of Research (Design led Innovation) facilitators, a Design Thinking/Design led Innovation workshop was conducted for the Community Engaged Learning Lab students, and action research outcomes published at 2013 Tsinghua International Design Management Symposium, December 2013 in Shenzhen, China (Morehen, Wright, & Wrigley, 2013)."

Co-optimisation of indoor environmental quality and energy consumption within urban office buildings

This study aimed to develop a multi-component model that can be used to maximise indoor environmental quality inside mechanically ventilated office buildings, while minimising energy usage. The integrated model, which was developed and validated from fieldwork data, was employed to assess the potential improvement of indoor air quality and energy saving under different ventilation conditions in typical air-conditioned office buildings in the subtropical city of Brisbane, Australia. When operating the ventilation system under predicted optimal conditions of indoor environmental quality and energy conservation and using outdoor air filtration, average indoor particle number (PN) concentration decreased by as much as 77%, while indoor CO2 concentration and energy consumption were not significantly different compared to the normal summer time operating conditions. Benefits of operating the system with this algorithm were most pronounced during the Brisbane’s mild winter. In terms of indoor air quality, average indoor PN and CO2 concentrations decreased by 48% and 24%, respectively, while potential energy savings due to free cooling went as high as 108% of the normal winter time operating conditions. The application of such a model to the operation of ventilation systems can help to significantly improve indoor air quality and energy conservation in air-conditioned office buildings.

Game On: Know Alcohol - Co-creating a tailored alcohol social marketing program

Research demonstrates that education programs are more effective when their target audiences and other key stakeholder groups are involved in the design. The majority of programs continue to be researcher and expert driven. This study extends upon previous research by employing a co-creation research design to offer a consumer driven alternative to education program design. Two co-creation groups involving twenty 14-16 year old Year 10 students who had previously participated in the Game On:Know Alcohol (GOKA) program, which aims to moderate alcohol drinking attitudes and behaviour, were conducted. Analysis revealed that a co-created GOKA program will differ substantially from the researcher and expert driven program that is currently being field tested. Students prefer interactive activities and activities that engage and challenge. Co-creation offers the potential to contest researcher and expert views and may offer to assist in the generation of new insights for the development of education programs.

Understanding, utilizing and valuing design tools in business

This chapter examines the tools and activities (referred to as approaches) used by a catalyst while facilitating a design-led transformation within an Australian manufacturing small to medium enterprise (SME). Design-led innovation (DLI) aids the use of design at a higher strategic level; however few existing studies investigate the relative influence of approaches used by a catalyst while helping a firm to make a transition in the utilisation of design, specifically from a styling tool to a strategic process. This paper identifies the triggers to encouraging a shift toward understanding, utilising and valuing the business level outcomes of design through a range of design tools and activities within the participating company. Through a 12 month action research program, staff interviews and a reflective journal were utilised as data collection techniques to assess the successfulness of the approaches used during this project. It was found that, through the use of both successful and unsuccessful approaches, the catalyst achieved two key outcomes within the firm: 1) Improvements in the firm’s ability to challenge internal assumptions and standard practices; and 2) the creation of an informed and accurate awareness of company and industry issues. Approaches that made a higher impact of the firm were deemed successful, and were generally relatable to the task at hand, as perceived by employees. Additionally, the sequence in which the approaches were utilised was found to have a direct influence on their successfulness. Learnings from this research will assist future catalysts to facilitate a design-led transformation within a manufacturing SME through the use of design tools and activities with greater effectiveness.

Investigating how designers collaborate and respond to sustainable design criteria

This research provides a critical link to ensure designers remain at the forefront of developing safe, sustainable and innovative products and services in the future. The four key findings of this research contribute to the advancement of knowledge and provide an understanding of the relationships between designers' co-evolution approach and their use of analogy. The behavioural relationships between sketching and gesture were investigated. The outcome of this research is a Design Activity Framework. This framework demonstrates a novel understanding how designers design by concentrating on co-evolution, problem-framing and solution seeking.

The Business of Unfinished Business : Reflections on Co-construction of Meanings in Research Encounters

My concern in this commentary is the discrepancy between cultural psychologists' theoretical claims that meanings are co-constructed by, with and for individuals in ongoing social interaction, and their research practices where researcher's and research participant's meaning-making processes are separated in time into sequential turns. I argue for the need to live up to these theoretical assumptions, by making both the initial research encounter and the researcher's later interpretation process more co-constructive. I suggest making the initial research encounter more co-constructive by paying attention to these moments when the negotiated flow of interaction between researcher and research participant breaks down, for it allows the research participant's meaning-making to be traced and makes the researcher's efforts towards meaning more explicit. I propose to make the later interpretation process more co-constructive by adopting a more open-ended and dialogical way of writing that is specifically addressed to research participants and invites them to actively engage with researcher's meaning-making.

The Library beyond (just) the book: Collaboration and co-working spaces for new technology and new technological practices

Libraries have often been first adopters of many new technological innovations, such as, punch cards, computers, barcodes, and e-book readers. It is thus not surprising that many libraries have embraced the advent of the internet as an opportunity to move away from just being repositories of books, towards becoming ideas stores and local network hubs for entrepreneurial thinking and new creative practices. This presentation will look at the case of “The Edge” – an initiative of the State Library of Queensland in Brisbane, Australia, to establish a digital culture centre and learning environment deliberately designed for the co-creation and co-construction of knowledge. This initiative illustrates the potential role of libraries as testing grounds for new technologies and technological practices, which is particularly relevant in the context of the NBN rollout across Australia. It also provides an example of new engagement strategies for innovative co-working spaces that are a vital element in a trend that sees professionals, creatives and designers leave their traditional places of work and embrace the city as their office.

Application of fragment-based screening to the design of inhibitors of Escherichia coli DsbA

The thiol-disulfide oxidoreductase enzyme DsbA catalyzes the formation of disulfide bonds in the periplasm of Gram-negative bacteria. DsbA substrates include proteins involved in bacterial virulence. In the absence of DsbA, many of these proteins do not fold correctly, which renders the bacteria avirulent. Thus DsbA is a critical mediator of virulence and inhibitors may act as antivirulence agents. Biophysical screening has been employed to identify fragments that bind to DsbA from Escherichia coli. Elaboration of one of these fragments produced compounds that inhibit DsbA activity in vitro. In cell-based assays, the compounds inhibit bacterial motility, but have no effect on growth in liquid culture, which is consistent with selective inhibition of DsbA. Crystal structures of inhibitors bound to DsbA indicate that they bind adjacent to the active site. Together, the data suggest that DsbA may be amenable to the development of novel antibacterial compounds that act by inhibiting bacterial virulence.

Quality in group service encounters: A theoretical exploration of the concept of a simultaneous multi‐customer co‐creation process

Purpose The purpose of this paper is to explore the concept of service quality for settings where several customers are involved in the joint creation and consumption of a service. The approach is to provide first insights into the implications of a simultaneous multi‐customer integration on service quality. Design/methodology/approach This conceptual paper undertakes a thorough review of the relevant literature before developing a conceptual model regarding service co‐creation and service quality in customer groups. Findings Group service encounters must be set up carefully to account for the dynamics (social activity) in a customer group and skill set and capabilities (task activity) of each of the individual participants involved in a group service experience. Research limitations/implications Future research should undertake empirical studies to validate and/or modify the suggested model presented in this contribution. Practical implications Managers of service firms should be made aware of the implications and the underlying factors of group services in order to create and manage a group experience successfully. Particular attention should be given to those factors that can be influenced by service providers in managing encounters with multiple customers. Originality/value This article introduces a new conceptual approach for service encounters with groups of customers in a proposed service quality model. In particular, the paper focuses on integrating the impact of customers' co‐creation activities on service quality in a multiple‐actor model.