Mathematical modelling of the drying of sol gel microspheres

This thesis presents a mathematical model of the evaporation of colloidal sol droplets suspended within an atmosphere consisting of water vapour and air. The main purpose of this work is to investigate the causes of the morphologies arising within the powder collected from a spray dryer into which the precursor sol for Synroc™ is sprayed. The morphology is of significant importance for the application to storage of High Level Liquid Nuclear Waste. We begin by developing a model describing the evaporation of pure liquid droplets in order to establish a framework. This model is developed through the use of continuum mechanics and thermodynamic theory, and we focus on the specific case of pure water droplets. We establish a model considering a pure water vapour atmosphere, and then expand this model to account for the presence of an atmospheric gas such as air. We model colloidal particle-particle interactions and interactions between colloid and electrolyte using DLVO Theory and reaction kinetics, then incorporate these interactions into an expression for net interaction energy of a single particle with all other particles within the droplet. We account for the flow of material due to diffusion, advection, and interaction between species, and expand the pure liquid droplet models to account for the presence of these species. In addition, the process of colloidal agglomeration is modelled. To obtain solutions for our models, we develop a numerical algorithm based on the Control Volume method. To promote numerical stability, we formulate a new method of convergence acceleration. The results of a MATLAB™ code developed from this algorithm are compared with experimental data collected for the purposes of validation, and further analysis is done on the sensitivity of the solution to various controlling parameters.

Is the mineral borickyite (Ca,Mg)(Fe3+,Al)4(PO4,SO4,CO3)(OH)8•3-7.5H2O the same as delvauxite CaFe3+4(PO4,SO4)2(OH)8•4-6H2O?

The two minerals borickyite and delvauxite CaFe3+4(PO4,SO4)2(OH)8•4-6H2O have the same formula. Are the minerals identical or different? The minerals borickyite and delvauxite have been characterised by Raman spectroscopy. The minerals are related to the minerals diadochite and destinezite. Both minerals are amorphous. Delvauxite appears to vary in crystallinity from amorphous to semi-crystalline. The minerals are often X-ray non-diffracting. The minerals are found in soils and may be described as ‘colloidal’ minerals. Vibrational spectroscopy enables an assessment of the molecular structure of borickyite and delvauxite. Bands are assigned to phosphate and sulphate stretching and bending modes. Multiple water bending and stretching modes imply that non-equivalent water molecules in the structure exist with different hydrogen bond strengths. The two minerals show differing spectra and must be considered as different minerals.

Characterisation of sugarcane juice particles that influence the clarification process

Problems associated with processing whole sugarcane crop can be minimised by removing impurities during the clarification stage. As a first step, it is important to understand the colloidal chemistry of juice particles on a molecular level to assist development strategies for effective clarification performance. This paper presents the composition and surface characteristics of colloidal particles originating from various juice types by using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy (XPS) and zeta potential measurements. The composition and surface characteristics of colloidal juice particles are reported. The results indicate that there are three types of colloidal particles present viz., an aluminosilicate compound, silica and iron oxide, with the latter two being abundant. Proteins, polysaccharides and organic acids were identified on the surface of particles in juice. The overall particle charge varies from –2 mV to –6 mV. In comparison to juice expressed from burnt cane, the zeta potential values were more negative with juice particles originating from whole crop. This in part explains why these juices are difficult to clarify.

A new dasyurid marsupial from eastern Queensland, Australia : the buff-footed Antechinus, Antechinus mysticus sp. nov. (Marsupialia: Dasyuridae)

Antechinus mysticus sp. nov. occurs in coastal Australia, ranging from just north of the Queensland (Qld)/New South Wales (NSW) border to Mackay (mid-east Qld), and is sympatric with A. flavipes (Waterhouse) and A. subtropicus Van Dyck & Crowther in south-east Qld. The new species can be distinguished in the field, having paler feet and tail base than A. flavipes and a greyish head that merges to buff-yellow on the rump and flanks, compared with the more uniform brown head and body of A. subtropicus and A. stuartii Macleay. Features of the dentary can also be used for identification: A. mysticus differs from A. flavipes in having smaller molar teeth, from A. subtropicus in having a larger gap between front and rear palatal vacuities, and from A. stuartii in having a generally broader snout. Here, we present a morphological analysis of the new species in comparison with every member of the genus, including a discussion of genetic structure and broader evolutionary trends, as well as an identification key to species based on dental characters. It seems likely that the known geographic range of A. mysticus will expand as taxonomic focus on the genus is concentrated in south-east Queensland and north-east New South Wales.

Optimization of human papillomavirus type 16 (HPV-16) L1 expression in plants: Comparison of the suitability of different HPV-16 L1 gene variants and different cell-compartment localization

Virus-like particle-based vaccines for high-risk human papillomaviruses (HPVs) appear to have great promise; however, cell culture-derived vaccines will probably be very expensive. The optimization of expression of different codon-optimized versions of the HPV-16 L1 capsid protein gene in plants has been explored by means of transient expression from a novel suite of Agrobacterium tumefaciens binary expression vectors, which allow targeting of recombinant protein to the cytoplasm, endoplasmic reticulum (ER) or chloroplasts. A gene resynthesized to reflect human codon usage expresses better than the native gene, which expresses better than a plant-optimized gene. Moreover, chloroplast localization allows significantly higher levels of accumulation of L1 protein than does cytoplasmic localization, whilst ER retention was least successful. High levels of L1 (>17% total soluble protein) could be produced via transient expression: the protein assembled into higher-order structures visible by electron microscopy, and a concentrated extract was highly immunogenic in mice after subcutaneous injection and elicited high-titre neutralizing antibodies. Transgenic tobacco plants expressing a human codon-optimized gene linked to a chloroplast-targeting signal expressed L1 at levels up to 11% of the total soluble protein. These are the highest levels of HPV L1 expression reported for plants: these results, and the excellent immunogenicity of the product, significantly improve the prospects of making a conventional HPV vaccine by this means. © 2007 SGM.

Transient expression of Human papillomavirus type 16 L1 protein in Nicotiana benthamiana using an infectious tobamovirus vector

A Tobacco mosaic virus (TMV)-derived vector was used to express a native Human papillomavirus type 16 (HPV-16) L1 gene in Nicotiana benthamiana by means of infectious in vitro RNA transcripts inoculated onto N. benthamiana plants. HPV-16 L1 protein expression was quantitated by enzyme-linked immunosorbent assays (ELISA) after concentration of the plant extract. We estimated that the L1 product yield was 20-37 μg/kg of fresh leaf material. The L1 protein in the concentrated extract was antigenically characterised using the neutralising and conformation-specific Mabs H16:V5 and H16:E70, which bound to the plant-produced protein. Particles observed by transmission electron microscopy were mainly capsomers but virus-like particles (VLPs) similar to those produced in other systems were also present. Immunisation of rabbits with the concentrated plant extract induced a weak immune response. This is the first report of the successful expression of an HPV L1 gene in plants using a plant virus vector. © 2006 Elsevier B.V. All rights reserved.

Plant-produced cottontail rabbit papillomavirus L1 protein protects against tumor challenge : A proof-of-concept study

The native cottontail rabbit papillomavirus (CRPV) L1 capsid protein gene was expressed transgenically via Agrobacterium tumefaciens transformation and transiently via a tobacco mosaic virus (TMV) vector in Nicotiana spp. L1 protein was detected in concentrated plant extracts at concentrations up to 1.0 mg/kg in transgenic plants and up to 0.4 mg/kg in TMV-infected plants. The protein did not detectably assemble into viruslike particles; however, immunoelectron microscopy showed presumptive pentamer aggregates, and extracted protein reacted with conformation-specific and neutralizing monoclonal antibodies. Rabbits were injected with concentrated protein extract with Freund's incomplete adjuvant. All sera reacted with baculovirus-produced CRPV L1; however, they did not detectably neutralize infectivity in an in vitro assay. Vaccinated rabbits were, however, protected against wart development on subsequent challenge with live virus. This is the first evidence that a plant-derived papillomavirus vaccine is protective in an animal model and is a proof of concept for human papillomavirus vaccines produced in plants. Copyright © 2006, American Society for Microbiology. All Rights Reserved.

Food insecurity among adults residing in disadvantaged urban areas : potential health and dietary consequences

Objective: Food insecurity is the limited or uncertain availability or access to nutritionally-adequate, culturally-appropriate and safe foods. Food insecurity may result in inadequate dietary intakes, overweight or obesity and the development of chronic disease. Internationally, few studies have focused on the range of potential health outcomes related to food insecurity among adults residing in disadvantaged locations and no such Australian studies exist. The objective of this study was to investigate associations between food insecurity, socio-demographic and health factors and dietary intakes among adults residing in disadvantaged urban areas. Design: Data were collected by mail survey (n= 505, 53% response rate), which ascertained information about food security status, demographic characteristics (such as age, gender, household income, education) fruit and vegetable intakes, take-away and meat consumption, general health, depression and chronic disease. Setting: Disadvantaged suburbs of Brisbane city, Australia, 2009. Subjects: Individuals aged ≥ 20 years. Results: Approximately one-in-four households (25%) were food insecure. Food insecurity was associated with lower household income, poorer general health, increased healthcare utilisation and depression. These associations remained after adjustment for age, gender and household income. Conclusion: Food insecurity is prevalent in urbanised disadvantaged areas in developed countries such as Australia. Low-income households are at high risk of experiencing food insecurity. Food insecurity may result in significant health burdens among the population, and this may be concentrated in socioeconomically-disadvantaged suburbs.

Potential health and dietary consequences of food insecurity among Australian adults residing in urbanised disadvantaged areas

Purpose: Food insecurity is the limited/uncertain availability or ability to acquire nutritionally-adequate, culturally-relevant and safe foods. Adults suffering from food insecurity are at risk of inadequate nutrient intakes or, paradoxically, overweight/obesity and the development of chronic disease. Despite the global financial crisis and rising costs of living, few studies have investigated the potential dietary and health consequences of food insecurity among the Australian population. This study examined whether food insecurity was associated with health behaviours and dietary intakes among adults residing in socioeconomically-disadvantaged urbanised areas. Methods: In this cross-sectional study, a random sample of residents (n = 1000) were selected from the most disadvantaged suburbs of Brisbane city (response rate 51%). Data were collected by postal questionnaire which ascertained information on socio-demographic information, household food security, height, weight, frequency of healthcare utilisation, presence of chronic disease and intakes of fruit, vegetables and take-away. Data were analysed using logistic regression. Results/Findings: The prevalence of food insecurity was 25%. Those reporting food insecurity were two-to-three times more likely to have seen a general practitioner or been hospitalised within the previous 6 months. Furthermore, food insecurity was associated with a three-to-six-fold increase in the likelihood of experiencing depression. Food insecurity was associated with higher intakes of some take-away foods, however was not significantly associated with weight status or intakes of fruits or vegetables among this disadvantaged sample. Conclusion: Food insecurity has potential adverse health consequences that may result in significant health burdens among the population, and this may be concentrated in socioeconomically-disadvantaged suburbs.

Ionic liquid pre-treatment and fractionation of sugarcane bagasse for the production of bioethanol

Pretretament is an essential and expensive processing step for the manufacturing of ethanol from lignocellulosic raw materials. Ionic liquids are a new class of solvents that have the potential to be used as pretreatment agents. The attractive characteristics of ionic liquid pretreatment of lignocellulosics such as thermal stability, dissolution properties, fractionation potential, cellulose decrystallisation capacity and saccharification impact are investigated in this thesis. Dissolution of bagasse with 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) at high temperatures (110 �‹C to 160 �‹C) is investigated as a pretreatment process. Material balances are reported and used along with enzymatic saccharification data to identify optimum pretreatment conditions (150 �‹C for 90 min). At these conditions, the dissolved and reprecipitated material is enriched in cellulose, has a low crystallinity and the cellulose component is efficiently hydrolysed (93 %, 3 h, 15 FPU). At pretreatment temperatures < 150 �‹C, the undissolved material has only slightly lower crystallinity than the starting. At pretreatment temperatures . 150 �‹C, the undissolved material has low crystallinity and when combined with the dissolved material has a saccharification rate and extent similar to completely dissolved material (100 %, 3h, 15 FPU). Complete dissolution is not necessary to maximize saccharification efficiency at temperatures . 150 �‹C. Fermentation of [C4mim]Cl-pretreated, enzyme-saccharified bagasse to ethanol is successfully conducted (85 % molar glucose-to-ethanol conversion efficiency). As compared to standard dilute acid pretreatment, the optimised [C4mim]Cl pretreatment achieves substantially higher ethanol yields (79 % cf. 52 %) in less than half the processing time (pretreatment, saccharification, fermentation). Fractionation of bagasse partially dissolved in [C4mim]Cl to a polysaccharide rich and a lignin rich fraction is attempted using aqueous biphasic systems (ABSs) and single phase systems with preferential precipitation. ABSs of ILs and concentrated aqueous inorganic salt solutions are achievable (e.g. [C4mim]Cl with 200 g L-1 NaOH), albeit they exhibit a number of technical problems including phase convergence (which increases with increasing biomass loading) and deprotonation of imidazolium ILs (5 % - 8 % mol). Single phase fractionation systems comprising lignin solvents / cellulose antisolvents, viz. NaOH (2M) and acetone in water (1:1, volume basis), afford solids with, respectively, 40 % mass and 29 % mass less lignin than water precipitated solids. However, this delignification imparts little increase in saccharification rates and extents of these solids. An alternative single phase fractionation system is achieved simply by using water as an antisolvent. Regulating the water : IL ratio results in a solution that precipitates cellulose and maintains lignin in solution (0.5 water : IL mass ratio) in both [C4mim]Cl and 1-ethyl-3-methylimidazolium acetate ([C2mim]OAc)). This water based fractionation is applied in three IL pretreatments on bagasse ([C4mim]Cl, 1-ethyl-3-methyl imidazolium chloride ([C2mim]Cl) and [C2mim]OAc). Lignin removal of 10 %, 50 % and 60 % mass respectively is achieved although only 0.3 %, 1.5 % and 11.7 % is recoverable even after ample water addition (3.5 water : IL mass ratio) and acidification (pH . 1). In addition the recovered lignin fraction contains 70 % mass hemicelluloses. The delignified, cellulose-rich bagasse recovered from these three ILs is exposed to enzyme saccharification. The saccharification (24 h, 15 FPU) of the cellulose mass in starting bagasse, achieved by these pretreatments rank as: [C2mim]OAc (83 %)>>[C2mim]Cl (53 %)=[C4mim]Cl(53%). Mass balance determinations accounted for 97 % of starting bagasse mass for the [C4mim]Cl pretreatment , 81 % for [C2mim]Cl and 79 %for [C2mim]OAc. For all three IL treatments, the remaining bagasse mass (not accounted for by mass balance determinations) is mainly (more than half) lignin that is not recoverable from the liquid fraction. After pretreatment, 100 % mass of both ions of all three ILs were recovered in the liquid fraction. Compositional characteristics of [C2mim]OAc treated solids such as low lignin, low acetyl group content and preservation of arabinosyl groups are opposite to those of chloride IL treated solids. The former biomass characteristics resemble those imparted by aqueous alkali pretreatment while the latter resemble those of aqueous acid pretreatments. The 100 % mass recovery of cellulose in [C2mim]OAc as opposed to 53 % mass recovery in [C2mim]Cl further demonstrates this since the cellulose glycosidic bonds are protected under alkali conditions. The alkyl chain length decrease in the imidazolium cation of these ILs imparts higher rates of dissolution and losses, and increases the severity of the treatment without changing the chemistry involved.

Characterisation of sugarcane juice particles that influence the clarification process

Problems associated with processing whole sugarcane crop can be minimised by removing impurities during the clarification stage. As a first step, it is important to understand the colloidal chemistry of juice particles on a molecular level to assist development of strategies for effective clarification performance. This paper presents the composition and surface characteristics of colloidal particles originating from various juice types by using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy(XPS) and zeta potential measurements. The composition and surface characteristics of colloidal juice particles are reported. The results indicate that there are three types of colloidal particles present, viz. an aluminosilicatecompound, silica and iron oxide, with the latter two being abundant. Proteins, polysaccharides and organic acids were identified on the surface of particles in juice. The overall particle charge varies from -2 mV to -6 mV. In comparison to juice expressed from burnt cane, the zeta potential values were more negative with juice particles originating from whole crop. This in part explains why these juices are difficult to clarify.

Auger spectroscopy of stratospheric particles : the influence of aerosols on interplanetary dust

Particle collections from the stratosphere via either the JSC Curatorial Program or the U2 Program (NASA Ames) occur between 16km and 19km altitude and are usually part of ongoing experiments to measure parameters related to the aerosol layer. Fine-grained aerosols (<0.1µm) occur in the stratosphere up to 35km altitude and are concentrated between 15km and 25km altitude[1]. All interplanetary dust particles (IDP's) from these stratospheric collections must pass through this aerosol layer before reaching the collection altitude. The major compounds in this aerosol layer are sulfur rich particulates (<0.1µm) and gases and include H2S04, OCS, S02 and CS2 [2].In order to assess possible surface reactions of interplanetary dust particles (IDP's) with ambient aerosols in the stratosphere, we have initiated a Surface Auger Microprobe (SAM) and electron microscope study of selected particles from the JSC Cosmic Dust Collection.

A chance for diversity? Australian online journalism

Australia’s mainstream media landscape has long been recognised as highly limited – media ownership in the country has traditionally been concentrated in the hands of a very few, and (except for Sydney and Melbourne) it is common for major Australian cities to be served by only one local newspaper, usually produced by Rupert Murdoch’s News Ltd. This can be seen also to affect the quality and diversity of Australian journalism; additionally, the global decline of newspaper publishers’ revenues and overall adverse economic conditions exert further pressure on journalistic operations in the country. At the same time, and possibly in response to the increasing stresses on industrial journalism in the country and the implications they have for the quality of journalistic products, a vibrant and dynamic ecosystem of Australian industrial and citizen journalism publications has emerged online. Existing media organisations have built strong news brands online, while citizen journalists and political bloggers have given voice to issues, concerns, and opinions hitherto underrepresented in Australian mainstream journalism; of particular interest, however, is the increasing level of engagement and interaction between the two. While such interaction has been characterised by deep animosity at times (especially also in the context of the Australian federal election in November 2007), Australia has also seen the emergence and establishment of a number of new, intermediary online publications which act as spaces for public debate and analysis – from the public intellectualism of Online Opinion through the muckraking of Crikey to the progressive politics of New Matilda. The rise of social media as spaces for the discussion of news and politics further changes the media environment, potentially leading both to renewed conflict between professional and citizen journalists and to a greater level of engagement between journalists and audiences. Overall, then, such online developments offer a chance for a greater diversity of opinion and representation in Australian journalism, but also remain under a cloud from uncertain long-term business models and funding arrangements. This chapter outlines current trends in Australian online journalism, and speculates about their effect on the Australian news media landscape.

Affecting interference

This collaborative project by Daniel Mafe and Andrew Brown, one of a number in they have been involved in together, conjoins painting and digital sound into a single, large scale, immersive exhibition/installation. The work as a whole acts as an interstitial point between contrasting approaches to abstraction: the visual and aural, the digital and analogue are pushed into an alliance and each works to alter perceptions of the other. For example, the paintings no longer mutely sit on the wall to be stared into. The sound seemingly emanating from each work shifts the viewer’s typical visual perception and engages their aural sensibilities. This seems to make one more aware of the objects as objects – the surface of each piece is brought into scrutiny – and immerses the viewer more viscerally within the exhibition. Similarly, the sonic experience is focused and concentrated spatially by each painted piece even as the exhibition is dispersed throughout the space. The sounds and images are similar in each local but not identical, even though they may seem to be the same from casual interaction, closer attention will quickly show this is not the case. In preparing this exhibition each artist has had to shift their mode of making to accommodate the other’s contribution. This was mainly done by a process of emptying whereby each was called upon to do less to the works they were making and to iterate the works toward a shared conception, blurring notions of individual imagination while maintaining material authorship. Empting was necessary to enable sufficient porosity where each medium allowed the other entry to its previously gated domain. The paintings are simple and subtle to allow the odd sonic textures a chance to work on the viewer’s engagement with them. The sound remains both abstract, using noise-like textures, and at a low volume to allow the audience’s attention to wander back and forth between aspects of the works.

Vibrational spectroscopy of the multianion mineral kemmlitzite (Sr,Ce)Al3(AsO4)(SO4)(OH)6

Some minerals are colloidal and show no X-ray diffraction patterns. Vibrational spectroscopy offers one of the few methods for the assessment of the structure of these types of mineral. Among this group of minerals is kemmlitzite (Sr,Ce)Al3(AsO4)(SO4)(OH)6. The objective of this research is to determine the molecular structure of the mineral kemmlitzite using vibrational spectroscopy. Raman microscopy offers a useful method for the analysis of such colloidal minerals. Raman and infrared bands are attributed to the AsO43- , SO42- and water stretching vibrations. The Raman spectrum is dominated by a very intense sharp band at 984 cm-1 assigned to the SO42- symmetric stretching mode. Raman bands at 690, 772 and 825 cm-1 may be assigned to the AsO43- antisymmetric and symmetric stretching modes. Raman bands observed at 432 and 465 cm-1 are attributable to the doubly degenerate 2 (SO4)2- bending mode. Vibrational spectroscopy is important in the assessment of the molecular structure of the kemmlitzite, especially when the mineral is non-diffracting or poorly diffracting.