Diurnal rhythm and effects of feeding, exercise and recombinant equine growth hormone on serum insulin concentrations in the horse

Reasons for performing the study As growth hormone increases lean body mass, it could be a therapy for obese horses. However, growth hormone use induces hyperinsulinaemia in some species, so further investigation is warranted. Objectives To investigate the effects of feeding, exercise and growth hormone therapy on basal insulin concentrations in healthy horses. Study design In vivo experimental study. Methods Blood samples were obtained every 30 min from 12 geldings over 24 h, to establish basal serum insulin concentrations, before they underwent a 3-week exercise programme. Horses were allocated into 2 groups and exercised for another 4 weeks. Group A received daily i.m. injections of recombinant equine growth hormone; 5 mg/day for 5 days, then 12.5 mg/day for 16 days. Blood samples were taken daily before feeding. Insulin vs. time area under curve of Groups A and B were compared using a Student's unpaired t test. Results Horses demonstrated insulin peaks within 2 h of feeding of 577 ± 108.3 pmol/l at 09.30 h and 342.4 ± 75.7 pmol/l at 17.30 h, despite receiving the same meal. The nadir was between midnight and 07.30 h. Exercise had no effect on basal insulin concentrations prior to equine growth hormone administrations. The equine growth hormone injections increased serum insulin concentrations (P = 0.01) within Group A, from 44.4 ± 15.3 pmol/l initially to 320.9 ± 238.2 pmol/l by Day 12. Exogenous growth hormone caused variable hyperinsulinaemia, which was alleviated once equine growth hormone administration ceased. Conclusions Single serum samples taken prior to the morning meal provide basal insulin concentrations. Exercise did not change basal insulin concentrations. However, equine growth hormone injections increased basal insulin concentrations, which were not ameliorated by exercise. Potential relevance This therapy is not recommended to address obesity in insulin-resistant equids.

The role of fathers in child feeding : perceived responsibility and predictors of participation

Background The role of fathers in shaping their child’s eating behaviour and weight status through their involvement in child feeding has rarely been studied. This study aims to describe the fathers’ perceived responsibility for child feeding, and to identify predictors of how frequently fathers eat meals with their child. Methods Four hundred and thirty-six Australian fathers (M age=37 years, SD=6 years; 34% university educated) of a 2-5 year old child (M age=3.5 years, SD=0.9 years; 53% boys) were recruited via contact with mothers enrolled in existing research projects or a University staff and student email list. Data were collected from fathers via a self-report questionnaire. Descriptive and hierarchical linear regression analyses were conducted. Results The majority of fathers reported that the family often/mostly ate meals together (79%). Many fathers perceived that they were responsible at least half of the time for feeding their child in terms of organizing meals (42%); amount offered (50%) and deciding if their child eats the ‘right kind of foods’ (60%). Time spent in paid employment was inversely associated with how frequently fathers ate meals with their child (β=-0.23, p<0.001); however, both higher perceived responsibility for child feeding (β=-0.16, p<0.004) and a more involved and positive attitude toward their role as a father (β=0.20, p<0.001) were positively related to how often they ate meals with their child, adjusting for a range of paternal and child covariates, including time spent in paid employment. Conclusions Fathers from a broad range of educational backgrounds appear willing to participate in research studies on child feeding. Most fathers were engaged and involved in family meals and child feeding. This suggests that fathers, like mothers, should be viewed as potential agents for the implementation of positive feeding practices within the family.

Dads at the dinner table a cross-sectional study of Australian fathers' child feeding perceptions and practices

Maternal perceptions and practices regarding child feeding have been extensively studied in the context of childhood overweight and obesity. To date, there is scant evidence on the role of fathers in child feeding. This cross-sectional study aimed to identify whether characteristics of fathers and their concerns about their children’s risk of overweight were associated with child feeding perceptions and practices. Questionnaires were used to collect data from 436 Australian fathers (mean age = 37 years, SD = 6) of a child (53% boys) aged between 2-5 years (M = 3.5 years, SD = 0.9). These data included a range of demographic variables and selected subscales from the Child Feeding Questionnaire on concern about child weight, perceived responsibility for child feeding and controlling practices (pressure to eat and restriction). Multivariable linear regression was used to examine associations between demographic variables and fathers’ feeding perceptions and practices. Results indicated that fathers’ who were more concerned about their child becoming overweight reported higher perceived responsibility for child feeding and were more controlling of what and how much their child eats. Greater time commitment to paid work, possessing a health care card (indicative of socioeconomic disadvantage) and younger child age were associated with fathers’ perceiving less responsibility for feeding. Factors such as paternal BMI and education level, as well as child gender were not associated with feeding perceptions or practices. This study contributes to the extant literature on fathers’ role in child feeding, revealing several implications for research and interventions in the child feeding field.

Anatomic fitting of total artificial hearts for in vivo evaluation

Successful anatomic fitting of a total artificial heart (TAH) is vital to achieve optimal pump hemodynamics after device implantation. Although many anatomic fitting studies have been completed in humans prior to clinical trials, few reports exist that detail the experience in animals for in vivo device evaluation. Optimal hemodynamics are crucial throughout the in vivo phase to direct design iterations and ultimately validate device performance prior to pivotal human trials. In vivo evaluation in a sheep model allows a realistically sized representation of a smaller patient, for which smaller third-generation TAHs have the potential to treat. Our study aimed to assess the anatomic fit of a single device rotary TAH in sheep prior to animal trials and to use the data to develop a threedimensional, computer-aided design (CAD)-operated anatomic fitting tool for future TAH development. Following excision of the native ventricles above the atrio-ventricular groove, a prototype TAH was inserted within the chest cavity of six sheep (28–40 kg).Adjustable rods representing inlet and outlet conduits were oriented toward the center of each atrial chamber and the great vessels, with conduit lengths and angles recorded for future analysis. A threedimensional, CAD-operated anatomic fitting tool was then developed, based on the results of this study, and used to determine the inflow and outflow conduit orientation of the TAH. The mean diameters of the sheep left atrium, right atrium, aorta, and pulmonary artery were 39, 33, 12, and 11 mm, respectively. The center-to-center distance and outer-edge-to-outer-edge distance between the atria, found to be 39 ± 9 mm and 72 ± 17 mm in this study, were identified as the most critical geometries for successful TAH connection. This geometric constraint restricts the maximum separation allowable between left and right inlet ports of a TAH to ensure successful alignment within the available atrial circumference.

Microstructure of an artificial grain boundary weak link in an YBa2Cu3O(7-δ) thin film grown on a (100)(110), [001]-tilt Y-ZrO2 bicrystal

The microstructure of an artificial grain boundary in an YBa2Cu3O7-δ (YBCO) thin film grown on a (100)(110), [001]-tilt yttria-stabilized-zirconia (YSZ) bicrystal substrate has been studied using transmission electron microscopy (TEM). The orientation relationship between the YBCO film and the YSZ substrate was [001]YBCO∥[001]YSZ and [110]YBCO∥[100]YSZ for each half of the bicrystal film. However, the exact boundary geometry of the bicrystal substrate was not transferred to the film. The substrate boundary was straight while the film boundary was wavy. In several cases there was bending of the lattice confined within a distance of a few basal-plane lattice spacings from the boundary plane and microfaceting. No intergranular secondary phase was observed but about 25% of the boundary was covered by c-axis-tilted YBCO grains and a-axis-oriented grains, both of which were typically adjacent to CuO grains or surrounded by a thin Cu-rich amorphous layer.

Microstructure and properties of artificial grain boundaries in epitaxial YBA2Cu3O7-δ thin films grown on [001] tilt YZrO2 bicrystals

The microstructure of artificial grain boundaries in YBa2Cu3O7-δ (YBCO) thin films grown on [001] tilt YZrO2 (YSZ) bicrystal substrates has been characterized using transmission electron microscopy and atomic force microscopy. Despite a relatively straight morphology of the substrate boundaries, the film boundaries were wavy. The waviness was a result of the combined effects of grooving at the substrate boundaries prior to the film deposition and an island-growth mechanism for YBCO on YSZ substrates. The dihedral angle of the groove walls varied with the misorientation angle and depended on the symmetry of the substrate boundary. The amplitudes of the film boundary waviness compared well with the widths of the grooves. In addition, the grooves induced local bending of the YBCO lattice planes and additional tilt components perpendicular to the c-axis close to the film boundaries. © 1995.

Properties of artificial grain boundary weak links grown on Y-ZrO 2 bicrystals

Weak links were fabricated by pulsed laser deposition of YBa 2Cu3Ox thin films on Y-ZrO2 bicrystal substrates. They were formed by transferring the bicrystal boundary into the epitaxial film during the film growth. Their properties were determined by the misorientation angle ( theta ) between the two halves of the bicrystal. The transport properties of the weak links were studied as a function of theta and an exponential dependence of the weak link critical current density was observed for angles up to 45 degrees . Clear Josephson effects with good microwave and magnetic field response were observed.

Weak links and dc SQUIDS on artificial nonsymmetric grain boundaries in YBa2Cu3O7-δ

We have studied weak links and dc-SQUIDs made from pulsed laser deposited YBa2Cu3O7-δ thin films on Y-ZrO 2 bicrystal substrates. The transport properties of the weak links were studied as a function of the misorientation angle (θ) between the two halves of the bicrystal and an exponential dependence of the weak link critical current density was observed for angles up to 40°at 77 K. Josephson effects with clear microwave and magnetic field responses were observed. An optimum dc-SQUID performance at 77 K was obtained for θ=32°. At this temperature, we achieved a periodic magnetic field response with a modulation depth of 12 μV.

Artificial grain boundary Josephson junctions : properties and applications

Engineered grain boundary Josephson junctions in YBaCuO were formed on bicrystal Y-ZrO2 substrates. Laser deposited films were patterned into micron size microbridges. The authors obsd. a pronounced correlation between superconducting transport properties of grain boundary junctions and the misorientation angle θ between the two halves of the bicrystal. The crit. Josephson current Ic decreased about four orders of magnitude as θ was increased from 0 to 45 degrees. Clear microwave and magnetic field responses were obsd. at 77 K. At this temp., crit. current times normal resistance products, IcRn, of up to 1 mV were measured for low angle grain boundaries, and Shapiro steps were obsd. up to that voltage. DC SQUIDs were fabricated, and best performance at 77 K was obtained for θ = 32° with a 4-μm strip width. To utilize the higher IcRn value of a lower θ, submicron junctions have to be developed. [on SciFinder(R)]

Validation of a new tool to measure responsiveness and structure in the feeding context : the Authoritative Feeding Practices Questionnaire

How mothers interact with their toddlers around food lays the foundations for healthy eating and healthy weight gain in later life. This research involving 467 Australian first-time mothers of 2-year-old children resulted in the development of a new self-report tool, the Authoritative Feeding Practices Questionnaire, assessing maternal responsive feeding and mealtime structure. Secondary analysis of the NOURISH randomised controlled trial included theory-driven item selection, confirmatory factor analysis, evaluation of psychometric properties and construct validation. The result is a brief, reliable and valid new tool for evaluating the maternal feeding practices that support children to become healthy, independent eaters.

Association between maternal depressive symptoms in the early postnatal period and responsiveness in feeding at child age 2 years

Maternal depression is a known risk factor for poor outcomes for children. Pathways to these poor outcomes relate to reduced maternal responsiveness or sensitivity to the child. Impaired responsiveness potentially impacts the feeding relationship and thus may be a risk factor for inappropriate feeding practices. The aim of this study was to examine the longitudinal relationships between self-reported maternal post-natal depressive symptoms at child age 4 months and feeding practices at child age 2 years in a community sample. Participants were Australian first-time mothers allocated to the control group of the NOURISH randomized controlled trial when infants were 4 months old. Complete data from 211 mothers (of 346 allocated) followed up when their children were 2 years of age (51% girls) were available for analysis. The relationship between Edinburgh Postnatal Depression Scale (EPDS) score (child age 4 months) and child feeding practices (child age 2 years) was tested using hierarchical linear regression analysis adjusted for maternal and child characteristics. Higher EPDS score was associated with less responsive feeding practices at child age 2 years: greater pressure [β = 0.18, 95% confidence interval (CI): 0.04–0.32, P = 0.01], restriction (β = 0.14, 95% CI: 0.001–0.28, P = 0.05), instrumental (β = 0.14, 95% CI: 0.005–0.27, P = 0.04) and emotional (β = 0.15, 95% CI: 0.01–0.29, P = 0.03) feeding practices (ΔR2 values: 0.02–0.03, P < 0.05). This study provides evidence for the proposed link between maternal post-natal depressive symptoms and lower responsiveness in child feeding. These findings suggest that the provision of support to mothers experiencing some levels of depressive symptomatology in the early post-natal period may improve responsiveness in the child feeding relationship.

Child eating behaviour outcomes of an early feeding intervention to reduce risk indicators for child obesity : the NOURISH RCT

Objective Describe parent-reported child eating behaviour and maternal parenting impact outcomes of an infant feeding intervention to reduce child obesity risk. Design and Methods An assessor masked Randomised Controlled Trial (RCT) with concealed allocation of individual mother-infant dyads. The NOURISH RCT enrolled 698 first-time mothers (mean age 30.1 years, SD=5.3) with healthy term infants (51% female) aged 4.3 months (SD=1.0) at baseline. Outcomes were assessed six months post-intervention when the children were 2-years old. Mothers reported on child eating behaviours using the Child Eating Behaviour Questionnaire (CEBQ), food preferences and dietary intake using a 24-hour telephone recall. Parenting was assessed using five scales validated for use in Australia. Results Intervention effects were evident on the CEBQ overall (MANOVA P=.002) and 4/8 subscales: child satiety responsiveness (P=.03), fussiness (P=.01), emotional overeating (P<.01), and food responsiveness (P=.06). Intervention children ‘liked’ more fruits (P<.01) and fewer non-core foods and beverages (Ps=.06, .03). The intervention mothers reported greater ‘autonomy encouragement’ (P=.002) Conclusions Anticipatory guidance on protective feeding practices appears to have modest positive impacts on child eating behaviours that are postulated to reduce future obesity risk.

Design of physiological control and magnetic levitation systems for a total artificial heart

Total Artificial Hearts are mechanical pumps which can be used to replace the failing natural heart. This novel study developed a means of controlling a new design of pump to reproduce physiological flow bringing closer the realisation of a practical artificial heart. Using a mathematical model of the device, an optimisation algorithm was used to determine the best configuration for the magnetic levitation system of the pump. The prototype device was constructed and tested in a mock circulation loop. A physiological controller was designed to replicate the Frank-Starling like balancing behaviour of the natural heart. The device and controller provided sufficient support for a human patient while also demonstrating good response to various physiological conditions and events. This novel work brings the design of a practical artificial heart closer to realisation.

The use of artificial MicroRNA technology to control gene expression in Arabidopsis thaliana

In plants, double-stranded RNA (dsRNA) is an effective trigger of RNA silencing, and several classes of endogenous small RNA (sRNA), processed from dsRNA substrates by DICER-like (DCL) endonucleases, are essential in controlling gene expression. One such sRNA class, the microRNAs (miRNAs) control the expression of closely related genes to regulate all aspects of plant development, including the determination of leaf shape, leaf polarity, flowering time, and floral identity. A single miRNA sRNA silencing signal is processed from a long precursor transcript of nonprotein-coding RNA, termed the primary miRNA (pri-miRNA). A region of the pri-miRNA is partially self-complementary allowing the transcript to fold back onto itself to form a stem-loop structure of imperfectly dsRNA. Artificial miRNA (amiRNA) technology uses endogenous pri-miRNAs, in which the miRNA and miRNA*(passenger strand of the miRNA duplex) sequences have been replaced with corresponding amiRNA/ amiRNA*sequences that direct highly efficient RNA silencing of the targeted gene. Here, we describe the rules for amiRNA design, as well as outline the PCR and bacterial cloning procedures involved in the construction of an amiRNA plant expression vector to control target gene expression in Arabidopsis thaliana. © 2014 Springer Science+Business Media New York.

A 22-nt artificial microRNA mediates widespread RNA silencing in Arabidopsis

It is known that 22-nucleotide (nt) microRNAs (miRNAs) derived from asymmetric duplexes trigger phased small-interfering RNA (phasiRNA) production from complementary targets. Here we investigate the efficacy of 22-nt artificial miRNA (amiRNA)-mediated RNA silencing relative to conventional hairpin RNA (hpRNA) and 21-nt amiRNA-mediated RNA silencing. CHALCONE SYNTHASE (CHS) was selected as a target in Arabidopsis thaliana due to the obvious and non-lethal loss of anthocyanin accumulation upon widespread RNA silencing. Over-expression of CHS in the pap1-D background facilitated visual detection of both local and systemic RNA silencing. RNA silencing was initiated in leaf tissues from hpRNA and amiRNA plant expression vectors under the control of an Arabidopsis RuBisCo small subunit 1A promoter (SSU). In this system, hpRNA expression triggered CHS silencing in most leaf tissues but not in roots or seed coats. Similarly, 21-nt amiRNA expression from symmetric miRNA/miRNA* duplexes triggered CHS silencing in all leaf tissues but not in roots or seed coats. However, 22-nt amiRNA expression from an asymmetric duplex triggered CHS silencing in all tissues, including roots and seed coats, in the majority of plant lines. This widespread CHS silencing required RNA-DEPENDENT RNA POLYMERASE6-mediated accumulation of phasiRNAs from the endogenous CHS transcript. These results demonstrate the efficacy of asymmetric 22-nt amiRNA-directed RNA silencing and associated phasiRNA production and activity, in mediating widespread RNA silencing of an endogenous target gene. Asymmetric 22-nt amiRNA-directed RNA silencing requires little modification of existing amiRNA technology and is expected to be effective in suppressing other genes and/or members of gene families.