Don't sell social science short

The News of the Week article that reports on Senator Kay Bailey Hutchison (R-TX) questioning the need to fund social science research at the National Science Foundation is alarming and shortsighted ("Senate panel chair asks why NSF funds social sciences," 12 May, p. 829). Social science research is at the fundamental core of basic research and has much to contribute to the economic viability of the United States. Twenty years of direct and jointly funded social and ecosystem science research at Colorado State University's Natural Resource Ecology Laboratory has produced deep insights into environmental and societal impacts of political upheaval, land use, and climate change in parts of Africa, Asia, and the Americas. Beyond greatly advancing our understanding of the coupled human-environmental system, the partnership of social and ecosystem science has brought scientists and decision-makers together to begin to develop solutions to difficult problems.

Implications of patterns of carbon pools and fluxes across a semiarid environmental gradient

Landscape scale environmental gradients present variable spatial patterns and ecological processes caused by climate, topography and soil characteristics and, as such, offer candidate sites to study environmental change. Data are presented on the spatial pattern of dominant species, biomass, and carbon pools and the temporal pattern of fluxes across a transitional zone shifting from Great Basin Desert scrub, up through pinyon-juniper woodlands and into ponderosa pine forest and the ecotones between each vegetation type. The mean annual temperature (MAT) difference across the gradient is approximately 3 degrees C from bottom to top (MAT 8.5-5.5) and annual precipitation averages from 320 to 530 mm/yr, respectively. The stems of the dominant woody vegetation approach a random spatial pattern across the entire gradient, while the canopy cover shows a clustered pattern. The size of the clusters increases with elevation according to available soil moisture which in turn affects available nutrient resources. The total density of woody species declines with increasing soil moisture along the gl-adient, but total biomass increases. Belowground carbon and nutrient pools change from a heterogenous to a homogenous distribution on either side of the woodlands. Although temperature controls the: seasonal patterns of carbon efflux from the soils, soil moisture appears to be the primary driving variable, but response differs underneath the different dominant species, Similarly, decomposition of dominant litter occurs faster-at the cooler and more moist sites, but differs within sites due to litter quality of the different species. The spatial pattern of these communities provides information on the direction of future changes, The ecological processes that we documented are not statistically different in the ecotones as compared to the: adjoining communities, but are different at sites above the woodland than those below the woodland. We speculate that an increase in MAT will have a major impact on C pools and C sequestering and release processes in these semiarid landscapes. However, the impact will be primarily related to moisture availability rather than direct effects of an increase in temperature. (C) 1998 Elsevier Science B.V.

Science and technology supervision resources

This document is an adaptation of a report submitted to the ALTC in 2009, with additional data collected through subsequent interviews with science supervisors. The organisation of the contents also reflects a development of thought since the original project. The framework presented in this document is intended to provide science and technology supervisors with a range of options with respect to supervisory pedagogy. It has been developed to highlight different aspects of thinking about supervision as a teaching and learning practice; as well as approaches, strategies and roles associated with supervision. It will enable science and technology supervisors to become aware of the diverse options available to them and provide systematic ways of thinking about supervisory practices. Use of this framework will encourage supervisors to make choices based on broader, rather than more limited, repertoires. It will also encourage thinking about supervision as a teaching and learning practice.

Cultural Science and Methodological Challenge!

The processes of digitization and deregulation have transformed the production, distribution and consumption of information and entertainment media over the past three decades. Today, researchers are confronted with profoundly different landscapes of domestic and personal media than the pioneers of qualitative audience research that came to form much of the conceptual basis of Cultural Studies first in Britain and North America and subsequently across all global regions. The process of media convergence, as a consequence of the dual forces of digitisation and deregulation, thus constitutes a central concept in the analysis of popular mass media. From the study of the internationalisation and globalisation of media content, changing regimes of media production, via the social shaping and communication technologies and conversely the impact of communication technology on social, cultural and political realities, to the emergence of transmedia storytelling, the interplay of intertextuality and genre and the formation of mediated social networks, convergence informs and shapes contemporary conceptual debates in the field of popular communication and beyond. However, media convergence challenges not only the conceptual canon of (popular) communication research, but poses profound methodological challenges. As boundaries between producers and consumers are increasingly fluent, formerly stable fields and categories of research such as industries, texts and audiences intersect and overlap, requiring combined and new research strategies. This preconference aims to offer a forum to present and discuss methodological innovations in the study of contemporary media and the analysis of the social, cultural,and political impact and challenges arising through media convergence. The preconference thus aims to focus on the following methodological questions and challenges: *New strategies of audience research responding to the increasing individualisation of popular media consumption. *Methods of data triangulation in and through the integrated study of media production, distribution and consumption. *Bridging the methodological and often associated conceptual gap between qualitative and quantitative research in the study of popular media. *The future of ethnographic audience and production research in light of blurring boundaries between media producers and consumers. *A critical re-examination of which textual configurations can be meaningfully described and studied as text. *Methodological innovations aimed at assessing the macro social, cultural and political impact of mediatization (including, but not limited to, "creative methods"). *Methodological responses to the globalisation of popular media and practicalities of international and transnational comparative research. *An exploration of new methods required in the study of media flow and intertextuality.

A new undergraduate model for broadly based spatial science curriculum at Queensland University of Technology : diversity in surveying curriculum

This paper provides an overview of the current QUT Spatial Science undergraduate program based in Brisbane, Queensland, Australia. It discusses the development and implementation of a broad-based educational model for the faculty of built environment and engineering courses and specifically to the course structure of the new Bachelor of Urban Development (Spatial Science) study major. A brief historical background of surveying courses is discussed prior to the detailing of the three distinct and complementary learning themes of the new course structure with a graphical course matrix. Curriculum mapping of the spatial science major has been undertaken as the course approaches formal review in late 2010. Work-integrated learning opportunities have been embedded into the curriculum and a brief outline is presented. Some issues relevant to the tertiary surveying/ spatial sector are highlighted in the context of changing higher education environments in Australia.

Spatial science news from the School of Urban Development, QUT April, 2010

EDM calibration/comparison at Coombabah,Gold Coast; Survey Staffer wins Vice-Chancellor’s Performance Fund Award; Focus on Surveying Service Teaching; Flexible Spatial Science Minor units; Reminder: Staff and Laboratories moving end of April.

Spatial science news from QUT : industry report : JULY 2010

Real-World Survey practical at Coombabah with GPS surveying; BEE student prizes Evening; Engaging Students in real-world learning at SERF.

Preservice teachers’ memories of their secondary science education experiences

Understanding preservice teachers’ memories of their education may aid towards articulating high-impact teaching practices. This study describes 246 preservice teachers’ perceptions of their secondary science education experiences through a questionnaire and 28-item survey. ANOVA was statistically significant about participants’ memories of science with 15 of the 28 survey items. Descriptive statistics through SPSS further showed that a teacher’s enthusiastic nature (87%) and positive attitude towards science (87%) were regarded as highly memorable. In addition, explaining abstract concepts well (79%), and guiding the students’ conceptual development with practical science activities (73%) may be considered as memorable secondary science teaching strategies. Implementing science lessons with one or more of these memorable science teaching practices may “make a difference” towards influencing high school students’ positive long-term memories about science and their science education. Further research in other key learning areas may provide a clearer picture of high-impact teaching and a way to enhance pedagogical practices.

Fusing curricula : science, technology and ICT

Curriculum demands continue to increase on school education systems with teachers at the forefront of implementing syllabus requirements. Education is reported frequently as a solution to most societal problems and, as a result of the world’s information explosion, teachers are expected to cover more and more within teaching programs. How can teachers combine subjects in order to capitalise on the competing educational agendas within school timeframes? Fusing curricula requires the bonding of standards from two or more syllabuses. Both technology and ICT complement the learning of science. This study analyses selected examples of preservice teachers’ overviews for fusing science, technology and ICT. These program overviews focused on primary students and the achievement of two standards (one from science and one from either technology or ICT). These primary preservice teachers’ fused-curricula overviews included scientific concepts and related technology and/or ICT skills and knowledge. Findings indicated a range of innovative curriculum plans for teaching primary science through technology and ICT, demonstrating that these subjects can form cohesive links towards achieving the respective learning standards. Teachers can work more astutely by fusing curricula; however further professional development may be required to advance thinking about these processes. Bonding subjects through their learning standards can extend beyond previous integration or thematic work where standards may not have been assessed. Education systems need to articulate through syllabus documents how effective fusing of curricula can be achieved. It appears that education is a key avenue for addressing societal needs, problems and issues. Education is promoted as a universal solution, which has resulted in curriculum overload (Dare, Durand, Moeller, & Washington, 1997; Vinson, 2001). Societal and curriculum demands have placed added pressure on teachers with many extenuating education issues increasing teachers’ workloads (Mobilise for Public Education, 2002). For example, as Australia has weather conducive for outdoor activities, social problems and issues arise that are reported through the media calling for action; consequently schools have been involved in swimming programs, road and bicycle safety programs, and a wide range of activities that had been considered a parental responsibility in the past. Teachers are expected to plan, implement and assess these extra-curricula activities within their already overcrowded timetables. At the same stage, key learning areas (KLAs) such as science and technology are mandatory requirements within all Australian education systems. These systems have syllabuses outlining levels of content and the anticipated learning outcomes (also known as standards, essential learnings, and frameworks). Time allocated for teaching science in obviously an issue. In 2001, it was estimated that on average the time spent in teaching science in Australian Primary Schools was almost an hour per week (Goodrum, Hackling, & Rennie, 2001). More recently, a study undertaken in the U.S. reported a similar finding. More than 80% of the teachers in K-5 classrooms spent less than an hour teaching science (Dorph, Goldstein, Lee, et al., 2007). More importantly, 16% did not spend teaching science in their classrooms. Teachers need to learn to work smarter by optimising the use of their in-class time. Integration is proposed as one of the ways to address the issue of curriculum overload (Venville & Dawson, 2005; Vogler, 2003). Even though there may be a lack of definition for integration (Hurley, 2001), curriculum integration aims at covering key concepts in two or more subject areas within the same lesson (Buxton & Whatley, 2002). This implies covering the curriculum in less time than if the subjects were taught separately; therefore teachers should have more time to cover other educational issues. Expectedly, the reality can be decidedly different (e.g., Brophy & Alleman, 1991; Venville & Dawson, 2005). Nevertheless, teachers report that students expand their knowledge and skills as a result of subject integration (James, Lamb, Householder, & Bailey, 2000). There seems to be considerable value for integrating science with other KLAs besides aiming to address teaching workloads. Over two decades ago, Cohen and Staley (1982) claimed that integration can bring a subject into the primary curriculum that may be otherwise left out. Integrating science education aims to develop a more holistic perspective. Indeed, life is not neat components of stand-alone subjects; life integrates subject content in numerous ways, and curriculum integration can assist students to make these real-life connections (Burnett & Wichman, 1997). Science integration can provide the scope for real-life learning and the possibility of targeting students’ learning styles more effectively by providing more than one perspective (Hudson & Hudson, 2001). To illustrate, technology is essential to science education (Blueford & Rosenbloom, 2003; Board of Studies, 1999; Penick, 2002), and constructing technology immediately evokes a social purpose for such construction (Marker, 1992). For example, building a model windmill requires science and technology (Zubrowski, 2002) but has a key focus on sustainability and the social sciences. Science has the potential to be integrated with all KLAs (e.g., Cohen & Staley, 1982; Dobbs, 1995; James et al., 2000). Yet, “integration” appears to be a confusing term. Integration has an educational meaning focused on special education students being assimilated into mainstream classrooms. The word integration was used in the late seventies and generally focused around thematic approaches for teaching. For instance, a science theme about flight only has to have a student drawing a picture of plane to show integration; it did not connect the anticipated outcomes from science and art. The term “fusing curricula” presents a seamless bonding between two subjects; hence standards (or outcomes) need to be linked from both subjects. This also goes beyond just embedding one subject within another. Embedding implies that one subject is dominant, while fusing curricula proposes an equal mix of learning within both subject areas. Primary education in Queensland has eight KLAs, each with its established content and each with a proposed structure for levels of learning. Primary teachers attempt to cover these syllabus requirements across the eight KLAs in less than five hours a day, and between many of the extra-curricula activities occurring throughout a school year (e.g., Easter activities, Education Week, concerts, excursions, performances). In Australia, education systems have developed standards for all KLAs (e.g., Education Queensland, NSW Department of Education and Training, Victorian Education) usually designated by a code. In the late 1990’s (in Queensland), “core learning outcomes” for strands across all KLA’s. For example, LL2.1 for the Queensland Education science syllabus means Life and Living at Level 2 standard number 1. Thus, a teacher’s planning requires the inclusion of standards as indicated by the presiding syllabus. More recently, the core learning outcomes were replaced by “essential learnings”. They specify “what students should be taught and what is important for students to have opportunities to know, understand and be able to do” (Queensland Studies Authority, 2009, para. 1). Fusing science education with other KLAs may facilitate more efficient use of time and resources; however this type of planning needs to combine standards from two syllabuses. To further assist in facilitating sound pedagogical practices, there are models proposed for learning science, technology and other KLAs such as Bloom’s Taxonomy (Bloom, 1956), Productive Pedagogies (Education Queensland, 2004), de Bono’s Six Hats (de Bono, 1985), and Gardner’s Multiple Intelligences (Gardner, 1999) that imply, warrant, or necessitate fused curricula. Bybee’s 5 Es, for example, has five levels of learning (engage, explore, explain, elaborate, and evaluate; Bybee, 1997) can have the potential for fusing science and ICT standards.

A model for integrating clinical care and basic science research, and pitfalls of performing complex research projects for addressing a clinical challenge

The collaboration of clinicians with basic science researchers is crucial for addressing clinically relevant research questions. In order to initiate such mutually beneficial relationships, we propose a model where early career clinicians spend a designated time embedded in established basic science research groups, in order to pursue a postgraduate qualification. During this time, clinicians become integral members of the research team, fostering long term relationships and opening up opportunities for continuing collaboration. However, for these collaborations to be successful there are pitfalls to be avoided. Limited time and funding can lead to attempts to answer clinical challenges with highly complex research projects characterised by a large number of "clinical" factors being introduced in the hope that the research outcomes will be more clinically relevant. As a result, the complexity of such studies and variability of its outcomes may lead to difficulties in drawing scientifically justified and clinically useful conclusions. Consequently, we stress that it is the basic science researcher and the clinician's obligation to be mindful of the limitations and challenges of such multi-factorial research projects. A systematic step-by-step approach to address clinical research questions with limited, but highly targeted and well defined research projects provides the solid foundation which may lead to the development of a longer term research program for addressing more challenging clinical problems. Ultimately, we believe that it is such models, encouraging the vital collaboration between clinicians and researchers for the work on targeted, well defined research projects, which will result in answers to the important clinical challenges of today.

Alkaline hydrothermal treatment of titanate nanostructures

Since its initial proposal in 1998, alkaline hydrothermal processing has rapidly become an established technology for the production of titanate nanostructures. This simple, highly reproducible process has gained a strong research following since its conception. However, complete understanding and elucidation of nanostructure phase and formation have not yet been achieved. Without fully understanding phase, formation, and other important competing effects of the synthesis parameters on the final structure, the maximum potential of these nanostructures cannot be obtained. Therefore this study examined the influence of synthesis parameters on the formation of titanate nanostructures produced by alkaline hydrothermal treatment. The parameters included alkaline concentration, hydrothermal temperature, the precursor material‘s crystallite size and also the phase of the titanium dioxide precursor (TiO2, or titania). The nanostructure‘s phase and morphology was analysed using X-ray diffraction (XRD), Raman spectroscopy and transmission electron microscopy. X-ray photoelectron spectroscopy (XPS), dynamic light scattering (non-invasive backscattering), nitrogen sorption, and Rietveld analysis were used to determine phase, for particle sizing, surface area determinations, and establishing phase concentrations, respectively. This project rigorously examined the effect of alkaline concentration and hydrothermal temperature on three commercially sourced and two self-prepared TiO2 powders. These precursors consisted of both pure- or mixed-phase anatase and rutile polymorphs, and were selected to cover a range of phase concentrations and crystallite sizes. Typically, these precursors were treated with 5–10 M sodium hydroxide (NaOH) solutions at temperatures between 100–220 °C. Both nanotube and nanoribbon morphologies could be produced depending on the combination of these hydrothermal conditions. Both titania and titanate phases are comprised of TiO6 units which are assembled in different combinations. The arrangement of these atoms affects the binding energy between the Ti–O bonds. Raman spectroscopy and XPS were therefore employed in a preliminary study of phase determination for these materials. The change in binding energy from a titania to a titanate binding energy was investigated in this study, and the transformation of titania precursor into nanotubes and titanate nanoribbons was directly observed by these methods. Evaluation of the Raman and XPS results indicated a strengthening in the binding energies of both the Ti (2p3/2) and O (1s) bands which correlated to an increase in strength and decrease in resolution of the characteristic nanotube doublet observed between 320 and 220 cm.1 in the Raman spectra of these products. The effect of phase and crystallite size on nanotube formation was examined over a series of temperatures (100.200 �‹C in 20 �‹C increments) at a set alkaline concentration (7.5 M NaOH). These parameters were investigated by employing both pure- and mixed- phase precursors of anatase and rutile. This study indicated that both the crystallite size and phase affect nanotube formation, with rutile requiring a greater driving force (essentially �\harsher. hydrothermal conditions) than anatase to form nanotubes, where larger crystallites forms of the precursor also appeared to impede nanotube formation slightly. These parameters were further examined in later studies. The influence of alkaline concentration and hydrothermal temperature were systematically examined for the transformation of Degussa P25 into nanotubes and nanoribbons, and exact conditions for nanostructure synthesis were determined. Correlation of these data sets resulted in the construction of a morphological phase diagram, which is an effective reference for nanostructure formation. This morphological phase diagram effectively provides a .recipe book�e for the formation of titanate nanostructures. Morphological phase diagrams were also constructed for larger, near phase-pure anatase and rutile precursors, to further investigate the influence of hydrothermal reaction parameters on the formation of titanate nanotubes and nanoribbons. The effects of alkaline concentration, hydrothermal temperature, crystallite phase and size are observed when the three morphological phase diagrams are compared. Through the analysis of these results it was determined that alkaline concentration and hydrothermal temperature affect nanotube and nanoribbon formation independently through a complex relationship, where nanotubes are primarily affected by temperature, whilst nanoribbons are strongly influenced by alkaline concentration. Crystallite size and phase also affected the nanostructure formation. Smaller precursor crystallites formed nanostructures at reduced hydrothermal temperature, and rutile displayed a slower rate of precursor consumption compared to anatase, with incomplete conversion observed for most hydrothermal conditions. The incomplete conversion of rutile into nanotubes was examined in detail in the final study. This study selectively examined the kinetics of precursor dissolution in order to understand why rutile incompletely converted. This was achieved by selecting a single hydrothermal condition (9 M NaOH, 160 °C) where nanotubes are known to form from both anatase and rutile, where the synthesis was quenched after 2, 4, 8, 16 and 32 hours. The influence of precursor phase on nanostructure formation was explicitly determined to be due to different dissolution kinetics; where anatase exhibited zero-order dissolution and rutile second-order. This difference in kinetic order cannot be simply explained by the variation in crystallite size, as the inherent surface areas of the two precursors were determined to have first-order relationships with time. Therefore, the crystallite size (and inherent surface area) does not affect the overall kinetic order of dissolution; rather, it determines the rate of reaction. Finally, nanostructure formation was found to be controlled by the availability of dissolved titanium (Ti4+) species in solution, which is mediated by the dissolution kinetics of the precursor.

Becoming “Librarian 2.0” : the skills, knowledge, and attributes required by library and information science professionals in a Web 2.0 world (and beyond)

In 2005, Stephen Abram, vice president of Innovation at SirsiDynix, challenged library and information science (LIS) professionals to start becoming “librarian 2.0.” In the last few years, discussion and debate about the “core competencies” needed by librarian 2.0 have appeared in the “biblioblogosphere” (blogs written by LIS professionals). However, beyond these informal blog discussions few systematic and empirically based studies have taken place. This article will discuss a research project that fills this gap. Funded by the Australian Learning and Teaching Council, the project identifies the key skills, knowledge, and attributes required by “librarian 2.0.” Eighty-one members of the Australian LIS profession participated in a series of focus groups. Eight themes emerged as being critical to “librarian 2.0”: technology, communication, teamwork, user focus, business savvy, evidence based practice, learning and education, and personal traits. This article will provide a detailed discussion on each of these themes. The study’s findings also suggest that “librarian 2.0” is a state of mind, and that the Australian LIS profession is undergoing a significant shift in “attitude.”

Paradigm shifters : tricksters and cultural science

This paper seeks to link anthropological and economic treatments of the process of innovation and change, not only within a given ‘complex system’ (e.g. a cosmology; an industry) but also between systems (e.g. cultural and economic systems; but also divine and human systems). The role of the ‘Go-Between’ is considered, both in the anthropological figure of the Trickster (Hyde 1998) and in the Schumpeterian entrepreneur. Both figures parlay appetite (economic wants) into meaning (cultural signs). Both practice a form of creativity based on deception, ‘creative destruction’; renewal by disruption and needs-must adaptation. The disciplinary purpose of the paper is to try to bridge two otherwise disconnected domains – cultural studies and evolutionary economics – by showing that the traditional methods of the humanities (e.g. anthropological, textual and historical analysis) have explanatory force in the context of economic actions and complex-system evolutionary dynamics. The objective is to understand creative innovation as a general cultural attribute rather than one restricted only to accredited experts such as artists; thus to theorise creativity as a form of emergence for dynamic adaptive systems. In this context, change is led by ‘paradigm shifters’ – tricksters and entrepreneurs who create new meanings out of the clash of difference, including the clash of mutually untranslatable communication systems (language, media, culture).

La théorie démocratique et La Physique Théorique

Le présent essai soutient, un peu le long d'une ligne simmelienne, que la théorie démocratique peut produire des théories pratiques et universelles, comme celles développées en physique théorique. Le raisonnement qui sous-tend cet essai est de montrer que la théorie de la «démocratie de base" peut-être vrai par le faite si on la comparer à la Relative Spécifique d’Einstein portant spécifiquement sur les paramètres de symétrie, l'unification, la simplicité et l'utilité. Ces paramètres sont ce qui fait qu’une théorie en physique comme ont la rencontre s’adapte non seulement aux connaissances actuelles, mais aussi de produire des chemins vers l'essai (application). Comme la théorie de la «démocratie de base » peut satisfaire ces mêmes paramètres, il pourrait trancher le débat relatif à la définition de la démocratie. Ceci sera d'abord soutenu pour discuter de ce qui est la théorie de la «démocratie de base» et pourquoi cela diffère des travaux précédents, en deuxième lieu, en expliquant les paramètres choisis (comme pour quoi ceux-ci et pas à d'autres confirment ou échouent les théories) et, troisièmement, en comparant comment la relativité et la théorie de la «démocratie de base » peut correspondre aux paramètres.

Cultivating Innovation through Social Relationships: A Qualitative Study of Outstanding Australian Innovators in Science, Technology and the Creative Industries

In this chapter, we describe and explore social relationship patterns associated with outstanding innovation. In doing so, we draw upon the findings of 16 in-depth interviews with award-winning Australian innovators from science & technology and the creative industries. The interviews covered topics relating to various influences on individual innovation capacity and career development. We found that for all of the participants, innovation was a highly social process. Although each had been recognised individually for their innovative success, none worked in isolation. The ability to generate innovative outcomes was grounded in certain types of interaction and collaboration. We outline the distinctive features of the social relationships which seem to be important to innovation, and ask which ‘social network capabilities’ might underlie the ability to create an optimal pattern of interpersonal relationships. We discuss the implications of these findings for universities, which we argue play a key role in the development of nascent innovators.