Male reproductive health disorders among Aboriginal and Torres Strait Islander men : a hidden problem?

OBJECTIVE: To better understand help-seeking behaviours and reproductive health disorders among Aboriginal and Torres Strait Islander men. DESIGN, SETTING AND PARTICIPANTS: A cross-sectional mixed-methods study conducted from 1 May 2004 to 30 April 2005 of 293 Aboriginal and Torres Strait Islander men aged 18 years and over from urban, rural and remote communities in the Northern Territory and Queensland. MAIN OUTCOME MEASURES: Subscale of the International Index of Erectile Function, self-reported help-seeking behaviours for erectile dysfunction (ED) and prostate disease, thematic analysis of semi-structured interviews and focus groups. RESULTS: The prevalence of moderate-to-severe ED increased across age groups, from about 10% in younger men (under 35 years) to 28% in men aged 55-74 years. Moderate-to-severe ED was strongly associated with reporting a chronic condition (odds ratio [OR], 3.67) and residing in a remote area (OR, 2.94). Aboriginal and Torres Strait Islander men aged 40-59 years showed similar low levels of help-seeking behaviours compared with non-Indigenous men from a comparable population-based study. About half of the men with ED saw a doctor or received treatment for ED in each population. While prostate cancer rates were low in both studies, testing for prostate problems was less frequent in Aboriginal and Torres Strait Islander men (11.4%) than in non-Indigenous men (34.1%, P < 0.001), despite similar levels of concern about prostate cancer. Barriers to help-seeking included shame, culturally inappropriate services and lack of awareness. CONCLUSION: This study, the first to investigate reproductive health of Aboriginal and Torres Strait Islander men, found low levels of help-seeking behaviours for reproductive health disorders, with implications for missing a predictor of chronic disease and late diagnosis of prostate disease.

A computationally effective alternating direction method for the space and time fractional Bloch–Torrey equation in 3-D

The space and time fractional Bloch–Torrey equation (ST-FBTE) has been used to study anomalous diffusion in the human brain. Numerical methods for solving ST-FBTE in three-dimensions are computationally demanding. In this paper, we propose a computationally effective fractional alternating direction method (FADM) to overcome this problem. We consider ST-FBTE on a finite domain where the time and space derivatives are replaced by the Caputo–Djrbashian and the sequential Riesz fractional derivatives, respectively. The stability and convergence properties of the FADM are discussed. Finally, some numerical results for ST-FBTE are given to confirm our theoretical findings.

Improved estimates of percolation and anisotropic permeability from 3-D X-ray microtomography using stochastic analyses and visualization

X-ray microtomography (micro-CT) with micron resolution enables new ways of characterizing microstructures and opens pathways for forward calculations of multiscale rock properties. A quantitative characterization of the microstructure is the first step in this challenge. We developed a new approach to extract scale-dependent characteristics of porosity, percolation, and anisotropic permeability from 3-D microstructural models of rocks. The Hoshen-Kopelman algorithm of percolation theory is employed for a standard percolation analysis. The anisotropy of permeability is calculated by means of the star volume distribution approach. The local porosity distribution and local percolation probability are obtained by using the local porosity theory. Additionally, the local anisotropy distribution is defined and analyzed through two empirical probability density functions, the isotropy index and the elongation index. For such a high-resolution data set, the typical data sizes of the CT images are on the order of gigabytes to tens of gigabytes; thus an extremely large number of calculations are required. To resolve this large memory problem parallelization in OpenMP was used to optimally harness the shared memory infrastructure on cache coherent Non-Uniform Memory Access architecture machines such as the iVEC SGI Altix 3700Bx2 Supercomputer. We see adequate visualization of the results as an important element in this first pioneering study.

The relationship between hip abductor muscle strength and magnitude of pelvic drop following a 3 week strengthening protocol in non-specific low back pain patients.

Purpose: To examine the relationship between hip abductor muscle (HABD) strength and the magnitude of pelvic drop (MPD) for patients with non-specific low back pain (NSLBP) and controls (CON) prior to and following a 3-week HABD strengthening protocol. At baseline, we hypothesized that NSLBP patients would exhibit reduced HABD strength and greater MPD compared to CON. Following the protocol, we hypothesized that strength would increase and MPD would decrease. Relevance: The Trendelenburg test (TT) is a common clinical test used to examine the ability of the HABD to maintain horizontal pelvic position during single limb stance. However, no study has specifically tested this theory. Moreover, no study has investigated the relationship between HABD strength and pelvic motion during walking or tested whether increased HABD strength would reduce the MPD. Methods: Quasi-experimental with 3-week exercise intervention. Fifteen NSLBP patients (32.5yrs,range 21-51yrs; VAS baseline: 5.3cm) and 10 CON (29.5yrs,range 22-47yrs) were recruited. Isometric HABD strength was measured using a force dynamometer and the average of three maximal voluntary contractions were normalized to body mass (N/kg). Two-dimensional MPD (degrees) was measured using a 60 Hz camera and was derived from two retroreflective-markers placed on the posterior superior iliac spines. MPD was measured while performing the static TT and while walking and averaged over 10 consecutive footfalls. NSLBP patients completed a 3-week HABD strengthening protocol consisting of 2 open-kinetic-chain exercises then all measures were repeated. Non-parametric analysis was used for group comparisons and correlation analysis. Results: At baseline, the NSLBP patients demonstrated 31% reduced HABD strength (mean=6.6 N/kg) compared to CON (mean=9.5 N/kg: p=0.03) and no significant differences in maximal pelvic frontal plane excursion while walking (NSLBP:mean=8.1°, CON:mean=7.1°: p=0.72). No significant correlations were measured between left HABD strength and right MPD (r=-0.37, p=0.11), or between right HABD strength and left MPD (r=-0.04, p=0.84) while performing the static TT. Following the 3-week strengthening protocol, NSLBP patients demonstrated a 12% improvement in strength (Post:mean=7.4 N/kg: p=0.02), a reduction in pain (VAS followup: 2.8cm), but no significant decreases in MPD while walking (p=0.92). Conclusions: NSLBP patients demonstrated reduced HABD strength at baseline and were able to increase strength and reduce pain in a 3-week period. However, despite increases in HABD strength, the NSLBP group exhibited similar MPD motion during the static TT and while walking compared to baseline and controls. Implications: The results suggest that the HABD alone may not be primarily responsible for controlling a horizontal pelvic position during static and dynamic conditions. Increasing the strength of the hip abductors resulted in a reduction of pain in NSLBP patients providing evidence for further research to identify specific musculature responsible for controlling pelvic motion.

Motivations for eWOM exchanges in an online community : self-development, problem solving support, relaxation

Electronic word-of-mouth (eWOM) has gained significant attention from academics and practitioners since it has become an important source of consumers’ product information, which can influence consumer purchase intentions (Cheung & Lee, 2012). eWOM exchanges exist in two types of online communities: online communities of practice and online communities of interest. A few prior studies in online communities of interest have examined members’ motivations for product knowledge exchange (Hung & Li, 2007; Ma & Agarwal, 2007). However, there is a lack of understanding of member motivations for exchanging social bonds and enjoyment in addition to exchanging knowledge pertaining to products in the community. It is important to have an initial comprehension of motivation as an antecedent of these three eWOM exchanges so as to be able to determine the driving factors that lead members to generate eWOM communication. Thus, the research problem "What are the driving factors for members to exchange eWOM in an online community?" was justified for investigation. The purpose of this study was to examine different member motivations for exchanging three types of eWOM. Resource exchange theory and theory on consumer motivation and behavior were applied to develop a conceptual framework for this study. This study focused on an online beauty community since there is an increasing trend of consumers turning to online beauty resources so as to exchange useful beauty product information (SheSpot, 2011). As this study examined consumer motivation in an online beauty community, a web-based survey was the most effective and efficient way to gain responses from beauty community members and these members were appropriate samples from which to draw a conclusion about the whole population. Multiple regression analysis was used to test the relationships between member motivations and eWOM exchanges. It was found that members have different motivations for exchanging knowledge, social bonds, and enjoyment related to products: self-development, problem solving support, and relaxation, respectively. This study makes three theoretical contributions. First, this study identifies the influence of self-development motivation on knowledge exchange in an online community of interest, just as this motivation has previously been found in online communities of practice. This study highlights that members of the two different types of online communities share similar goals of knowledge exchange, despite the two communities evincing different attributes (e.g., member characteristics and tasks’ objectives). Further, this study will assist researchers to understand other motivations identified by prior research in online communities of practice since such motivations may be applicable to online communities of interest. Second, this study offers a new perspective on member motivation for social bonding. This study indicates that in addition to social support from friends and family, consumers are motivated to build social bonds with members in an online community of interest since they are an important source of problem solving support in regard to products. Finally, this study extends the body of knowledge pertaining to member motivation for enjoyment exchange. This study provides a basis for researchers to understand that members in an online community of interest value experiential aspects of enjoyable consumption activities, and thus based on group norms, members have a mutual desire for relaxation from enjoyment exchange. The major practical contribution is that this study provides an important guideline for marketing managers to develop different marketing strategies based on member motivations for exchanging three types of eWOM in an online community of interest, such as an online beauty community. This will potentially help marketing managers increase online traffic and revenue, and thus bring success to the community. Although, this study contributes to the literature by highlighting three distinctive member motivations for eWOM exchanges in an online community of interest, there are some possible research limitations. First, this study was conducted in an online beauty community in Australia. Hence, further research should replicate this study in other industries and nations so as to give the findings greater generalisability. Next, online beauty community members are female skewed. Thus, future research should examine whether similar patterns of motivations would emerge in other online communities that tend to be populated by males (e.g., communities focused on football). Further, a web-based survey has its limitations in terms of self-selection and self-reporting (Bhatnagar & Ghose, 2004). Therefore, further studies should test the framework by employing different research methods in order to overcome these weaknesses.

Understanding body image disturbance in the promotion of mental health : a discourse analytic study

Health care interventions in the area of body image disturbance and eating disorders largely involve individual treatment approaches, while prevention and health promotion are relatively underexplored. A review of health promotion activities in the area of body image in Australia revealed three programmes, the most extensive and longest standing having been established in 1992. The aims of this programme are to reduce body image dissatisfaction and inappropriate eating behaviour, especially among women. Because health promotion is concerned with the social aspects of health, it was hypothesized by the authors that a social understanding of body image and eating disorders might be advanced in a health promotion setting and reflected in the approach to practice. In order to examine approaches to body image in health promotion, 10 health professionals responsible for the design and management of this programme participated in a series of semi-structured interviews between 1997 and 2000. Three discursive themes were evident in health workers' explanations of body image problems: (1) cognitive-behavioural themes; (2) gender themes; and (3) socio-cultural themes. While body image problems were constructed as psychological problems that are particularly experienced by women, their origins were largely conceived to be socio-cultural. The implications of these constructions are critically discussed in terms of the approach to health promotion used in this programme.

Mathematical modelling of controlled drug release from polymer micro-spheres : incorporating the effects of swelling, diffusion and dissolution via moving boundary problems

Controlled drug delivery is a key topic in modern pharmacotherapy, where controlled drug delivery devices are required to prolong the period of release, maintain a constant release rate, or release the drug with a predetermined release profile. In the pharmaceutical industry, the development process of a controlled drug delivery device may be facilitated enormously by the mathematical modelling of drug release mechanisms, directly decreasing the number of necessary experiments. Such mathematical modelling is difficult because several mechanisms are involved during the drug release process. The main drug release mechanisms of a controlled release device are based on the device’s physiochemical properties, and include diffusion, swelling and erosion. In this thesis, four controlled drug delivery models are investigated. These four models selectively involve the solvent penetration into the polymeric device, the swelling of the polymer, the polymer erosion and the drug diffusion out of the device but all share two common key features. The first is that the solvent penetration into the polymer causes the transition of the polymer from a glassy state into a rubbery state. The interface between the two states of the polymer is modelled as a moving boundary and the speed of this interface is governed by a kinetic law. The second feature is that drug diffusion only happens in the rubbery region of the polymer, with a nonlinear diffusion coefficient which is dependent on the concentration of solvent. These models are analysed by using both formal asymptotics and numerical computation, where front-fixing methods and the method of lines with finite difference approximations are used to solve these models numerically. This numerical scheme is conservative, accurate and easily implemented to the moving boundary problems and is thoroughly explained in Section 3.2. From the small time asymptotic analysis in Sections 5.3.1, 6.3.1 and 7.2.1, these models exhibit the non-Fickian behaviour referred to as Case II diffusion, and an initial constant rate of drug release which is appealing to the pharmaceutical industry because this indicates zeroorder release. The numerical results of the models qualitatively confirms the experimental behaviour identified in the literature. The knowledge obtained from investigating these models can help to develop more complex multi-layered drug delivery devices in order to achieve sophisticated drug release profiles. A multi-layer matrix tablet, which consists of a number of polymer layers designed to provide sustainable and constant drug release or bimodal drug release, is also discussed in this research. The moving boundary problem describing the solvent penetration into the polymer also arises in melting and freezing problems which have been modelled as the classical onephase Stefan problem. The classical one-phase Stefan problem has unrealistic singularities existed in the problem at the complete melting time. Hence we investigate the effect of including the kinetic undercooling to the melting problem and this problem is called the one-phase Stefan problem with kinetic undercooling. Interestingly we discover the unrealistic singularities existed in the classical one-phase Stefan problem at the complete melting time are regularised and also find out the small time behaviour of the one-phase Stefan problem with kinetic undercooling is different to the classical one-phase Stefan problem from the small time asymptotic analysis in Section 3.3. In the case of melting very small particles, it is known that surface tension effects are important. The effect of including the surface tension to the melting problem for nanoparticles (no kinetic undercooling) has been investigated in the past, however the one-phase Stefan problem with surface tension exhibits finite-time blow-up. Therefore we investigate the effect of including both the surface tension and kinetic undercooling to the melting problem for nanoparticles and find out the the solution continues to exist until complete melting. The investigation of including kinetic undercooling and surface tension to the melting problems reveals more insight into the regularisations of unphysical singularities in the classical one-phase Stefan problem. This investigation gives a better understanding of melting a particle, and contributes to the current body of knowledge related to melting and freezing due to heat conduction.

Footprint-based estimates of arch structure are confounded by body composition in adults

Previous research employing indirect measures of arch structure, such as those derived from footprints, have indicated that obesity results in a “flatter” foot type. In the absence of radiographic measures, however, definitive conclusions regarding the osseous alignment of the foot cannot be made. We determined the effect of body mass index (BMI) on radiographic and footprint‐based measures of arch structure. The research was a cross‐sectional study in which radiographic and footprint‐based measures of foot structure were made in 30 subjects (10 males, 20 female) in addition to standard anthropometric measures of height, weight, and BMI. Multiple (univariate) regression analysis demonstrated that both BMI ( β  = 0.39, t 26  = 2.12, p  = 0.04) and radiographic arch alignment ( β  = 0.51, t 26  = 3.32, p  < 0.01) were significant predictors of footprint‐based measures of arch height after controlling for all variables in the model ( R 2  = 0.59, F 3,26  = 12.3, p  < 0.01). In contrast, radiographic arch alignment was not significantly associated with BMI ( β  = −0.03, t 26  = −0.13, p  = 0.89) when Arch Index and age were held constant ( R 2  = 0.52, F 3,26  = 9.3, p  < 0.01). Adult obesity does not influence osseous alignment of the medial longitudinal arch, but selectively distorts footprint‐based measures of arch structure. Footprint‐based measures of arch structure should be interpreted with caution when comparing groups of varying body composition.

Performance of elite seated discus throwers in F30s classes : part I: does whole body positioning matter?

Background: Studies on the relationship between performance and design of the throwing frame have been limited and therefore require further investigation. Objectives: The specific objectives were to provide benchmark information about performance and whole body positioning of male athletes in F30s classes. Study Design: Descriptive analysis. Methods: A total of 48 attempts performed by 12 stationary discus throwers in F33 and F34 classes during seated discus throwing event of 2002 International Paralympic Committee Athletics World Championships were analysed in this study. The whole body positioning included overall throwing posture (i.e. number of points of contact between the thrower and the frame, body position, throwing orientation and throwing side) and lower limb placements (i.e. seating arrangements, points of contact on the both feet, type of attachment of both legs and feet). Results: Three (25%), five (42%), one (8%) and three (25%) athletes used from three to six points of contact, respectively. Seven (58%) and five (42%) athletes threw from a standing or a seated position, respectively. A straddle, a stool or a chair was used by six (50%), four (33%) or two (17%) throwers, respectively. Conclusions: This study provides key information for a better understanding of the interaction between throwing technique of elite seated throwers and their throwing frame.

The architecture of children’s use of language and tools when problem solving collaboratively with robotics

This paper demonstrates, following Vygotsky, that language and tool use has a critical role in the collaborative problem-solving behaviour of school-age children. It reports original ethnographic classroom research examining the convergence of speech and practical activity in children’s collaborative problem solving with robotics programming tasks. The researchers analysed children’s interactions during a series of problem solving experiments in which Lego Mindstorms toolsets were used by teachers to create robotics design challenges among 24 students in a Year 4 Australian classroom (students aged 8.5–9.5 years). The design challenges were incrementally difficult, beginning with basic programming of straight line movement, and progressing to more complex challenges involving programming of the robots to raise Lego figures from conduit pipes using robots as pulleys with string and recycled materials. Data collection involved micro-genetic analysis of students’ speech interactions with tools, peers, and other experts, teacher interviews, and student focus group data. Coding the repeated patterns in the transcripts, the authors outline the structure of the children’s social speech in joint problem solving, demonstrating the patterns of speech and interaction that play an important role in the socialisation of the school-age child’s practical intellect.

Integration-segregation decisions under general value functions: "create your own bundle - choose 1, 2, or all 3!",

Whether to keep products segregated (e.g., unbundled) or integrate some or all of them (e.g., bundle) has been a problem of profound interest in areas such as portfolio theory in finance, risk capital allocations in insurance and marketing of consumer products. Such decisions are inherently complex and depend on factors such as the underlying product values and consumer preferences, the latter being frequently described using value functions, also known as utility functions in economics. In this paper, we develop decision rules for multiple products, which we generally call ‘exposure units’ to naturally cover manifold scenarios spanning well beyond ‘products’. Our findings show, e.g. that the celebrated Thaler's principles of mental accounting hold as originally postulated when the values of all exposure units are positive (i.e. all are gains) or all negative (i.e. all are losses). In the case of exposure units with mixed-sign values, decision rules are much more complex and rely on cataloging the Bell number of cases that grow very fast depending on the number of exposure units. Consequently, in the present paper, we provide detailed rules for the integration and segregation decisions in the case up to three exposure units, and partial rules for the arbitrary number of units.

SHOX gene is expressed in vertebral body growth plates in idiopathic and congenital scoliosis : implications for the etiology of scoliosis in Turner Syndrome

Reduced SHOX gene expression has been demonstrated to be associated with all skeletal abnormalities in Turner syndrome, other than scoliosis (and kyphosis). There is evidence to suggest that Turner syndrome scoliosis is clinically and radiologically similar to idiopathic scoliosis, although the phenotypes are dissimilar. This pilot gene expression study used relative quantitative real-time PCR (qRT-PCR) of the SHOX (short stature on X) gene to determine whether it is expressed in vertebral body growth plates in idiopathic and congenital scoliosis. After vertebral growth plate dissection, tissue was examined histologically and RNA was extracted and its integrity was assessed using a Bio-Spec Mini, NanoDrop ND-1000 spectrophotometer and standard denaturing gel electrophoresis. Following cDNA synthesis, gene-specific optimization in a Corbett RotorGene 6000 real-time cycler was followed by qRT-PCR of vertebral tissue. Histological examination of vertebral samples confirmed that only growth plate was analyzed for gene expression. Cycling and melt curves were resolved in triplicate for all samples. SHOX abundance was demonstrated in congenital and idiopathic scoliosis vertebral body growth plates. SHOX expression was 11-fold greater in idiopathic compared to congenital (n = 3) scoliosis (p = 0.027). This study confirmed that SHOX was expressed in vertebral body growth plates, which implies that its expression may also be associated with the scoliosis (and kyphosis) of Turner syndrome. SHOX expression is reduced in Turner syndrome (short stature). In this study, increased SHOX expression was demonstrated in idiopathic scoliosis (tall stature) and congenital scoliosis.

Whole-body cryotherapy (extreme cold air exposure) for preventing and treating muscle soreness after exercise in adults (Protocol)

"This is the protocol for a review and there is no abstract. The objectives are as follows: To assess the effects (benefits and harms) of whole-body cryotherapy (cold air exposure) for preventing and treating muscle soreness after exercise in adults." -- publisher website

Engineering based problem solving in the middle school : design and construction with simple machines

Incorporating engineering concepts into middle school curriculum is seen as an effective way to improve students’ problem-solving skills. A selection of findings is reported from a science, technology, engineering and mathematics (STEM)-based unit in which students in the second year (grade 8) of a three-year longitudinal study explored engineering concepts and principles pertaining to the functioning of simple machines. The culminating activity, the focus of this paper, required the students to design, construct, test, and evaluate a trebuchet catapult. We consider findings from one of the schools, a co-educational school, where we traced the design process developments of four student groups from two classes. The students’ descriptions and explanations of the simple machines used in their catapult design are examined, together with how they rated various aspects of their engineering designs. Included in the findings are students’ understanding of how their simple machines were simulated by the resources supplied and how the machines interacted in forming a complex machine. An ability to link physical materials with abstract concepts and an awareness of design constraints on their constructions were apparent, although a desire to create a ‘‘perfect’’ catapult despite limitations in the physical materials rather than a prototype for testing concepts was evident. Feedback from teacher interviews added further insights into the students’ developments as well as the teachers’ professional learning. An evolving framework for introducing engineering education in the pre-secondary years is proposed.

"Ruby's Music Festival" : developing problem solving skills using online scenarios and creating opportunities to feed forward

One of the characteristics of good teaching is giving the highest quality feedback on student work but the term “feedback” is most commonly associated with summative assessment given by a teacher after work is completed. The student can often be a passive participant in the process. This article looks at the implementation of web based scenarios completed by students prior to summative assessment with the objective of improving legal problem solving skills. It examines the design process and the implementation of the problem solving activity and the approach to teaching and learning taken in the new law unit of which it is part. We argue that such activities are effective tools to feed forward and reflect on the implications for the effective teaching of law in higher education.