148 resultados para 196-808
Resumo:
Indium tin-oxide (ITO) and polycrystalline boron-doped diamond (BDD) have been examined in detail using the scanning electrochemical microscopy technique in feedback mode. For the interrogation of electrodes made from these materials, the choice of mediator has been varied. Using Ru(CN) 4− 6 (aq), ferrocene methanol (FcMeOH), Fe(CN) 3− 6 (aq) and Ru(NH 3) 3+ 6 (aq), approach curve experiments have been performed, and for purposes of comparison, calculations of the apparent heterogeneous electron transfer rates (k app) have been made using these data. In general, it would appear that values of k app are affected mainly by the position of the mediator reversible potential relative to the relevant semiconductor band edge (associated with majority carriers). For both the ITO (n type) and BDD (p type) electrodes, charge transfer is impeded and values are very low when using FcMeOH and Fe(CN) 3− 6 (aq) as mediators, and the use of Ru(NH 3) 3+ 6(aq) results in the largest value of k app. With ITO, the surface is chemically homogeneous and no variation is observed for any given mediator. Data is also presented where the potential of the ITO electrode is fixed using a ratio of the mediators Fe(CN) 3− 6(aq) and Fe(CN) 4− 6(aq). In stark contrast, the BDD electrode is quite the opposite and a range of k app values are observed for all mediators depending on the position on the surface. Both electrode surfaces are very flat and very smooth, and hence, for BDD, variations in feedback current imply a variation in the electrochemical activity. A comparison of the feedback current where the substrate is biased and unbiased shows a surprising degree of proportionality.
Resumo:
Platelet-derived endothelial cell growth factor/thymidine phosphorylase (PD-ECGF/TP) is an enzyme with angiogenic and cell motility properties. Moreover, it is involved in the transformation of fluoropyrimidines into active cytotoxic metabolites, In the present study, the expression of PD-ECGF in normal lung and lung cancer was immunohistochemically evaluated using the P-GF.44C monoclonal antibody. Alveolar and tumoural macrophages mere invariably stained and mere used as an internal control for assessment of the staining. Alveolar epithelium was always negative, whilst bronchiolar epithelium showed occasional positive reactivity. Normal lung and tumour endothelium was occasionally positive, Positive staining in more than 50 per cent of cells was observed in 23/71 squamous carcinomas (32 per cent), 16/38 (42 per cent) adenocarcinomas, and 2/6 (33 per cent) adenosquamous carcinomas. Differentiated areas and areas of squamous metaplasia mere more strongly positive than other tumour areas. All 22 small cell carcinomas and one carcinoid tumour were negative. The present study provides a baseline for future studies in non-small cell lung cancer to correlate PD-ECGF expression with tumour vascularization, prognosis, and response to chemotherapy.
Resumo:
Purpose – The purpose of this paper is to develop an effective methodology for implementing lean manufacturing strategies and a leanness evaluation metric using continuous performance measurement (CPM). Design/methodology/approach – Based on five lean principles, a systematic lean implementation methodology for manufacturing organizations has been proposed. A simplified leanness evaluation metric consisting of both efficiency and effectiveness attributes of manufacturing performance has been developed for continuous evaluation of lean implementation. A case study to validate the proposed methodology has been conducted and proposed CPM metric has been used to assess the manufacturing leanness. Findings – Proposed methodology is able to systematically identify manufacturing wastes, select appropriate lean tools, identify relevant performance indicators, achieve significant performance improvement and establish lean culture in the organization. Continuous performance measurement matrices in terms of efficiency and effectiveness are proved to be appropriate methods for continuous evaluation of lean performance. Research limitations/implications – Effectiveness of the method developed has been demonstrated by applying it in a real life assembly process. However, more tests/applications will be necessary to generalize the findings. Practical implications – Results show that applying the methods developed, managers can successfully identify and remove manufacturing wastes from their production processes. By improving process efficiency, they can optimize their resource allocations. Manufacturers now have a validated step by step methodology for successfully implementing lean strategies. Originality/value – According to the authors’ best knowledge, this is the first known study that proposed a systematic lean implementation methodology based on lean principles and continuous improvement techniques. Evaluation of performance improvement by lean strategies is a critical issue. This study develops a simplified leanness evaluation metric considering both efficiency and effectiveness attributes and integrates it with the lean implementation methodology.
Resumo:
Achieving energy efficient legged locomotion is an important goal for the future of robot mobility. This paper presents a novel joint for legged locomotion that is energy efficient for two reasons. The first reason is the configuration of the elastic elements and actuator which we show analytically has lower energy losses than the typical arrangement. The second is that the joint stiffness, and hence stance duration, is controllable without requiring any energy from the actuator. Further, the joint stiffness can be changed significantly during the flight phase, from zero to highly rigid. Results obtained from a prototype hopper, demonstrate that the joint allows continuous and peak hopping via torque control. The results also demonstrate that the hopping frequency can be varied between 2.2Hz and 4.6Hz with associated stance duration of between 0.35 and 0.15 seconds.
Resumo:
Fibrogenic stresses promote progression of renal tubulointerstitial fibrosis, disparately affecting survival, proliferation and trans-differentiation of intrinsic renal cell populations through ill-defined biomolecular pathways. We investigated the effect of fibrogenic stresses on the activation of cell-specific mitogen-activated protein kinase (MAPK) in renal fibroblast, epithelial and endothelial cell populations. The relative outcomes (cell death, proliferation, trans-differentiation) associated with activation or inhibition of extracellular-regulated protein kinase (ERK) or stress activated/c-Jun N terminal kinase (JNK) were analysed in each renal cell population after challenge with oxidative stress (1 mmol/L H2O2), transforming growth factor-beta1 (TGF-beta1, 10 ng/mL) or tumour necrosis factor-alpha (TNF-alpha, 50 ng/mL) over 0-20 h. Apoptosis increased significantly in all cell types after oxidative stress (P < 0.05). In fibroblasts, oxidative stress caused the activation of ERK (pERK) but not JNK (pJNK). Inhibition of ERK by PD98059 supported its role in a fibroblast death pathway. In epithelial and endothelial cells, oxidative stress-induced apoptosis was preceded by early induction of pERK, but its inhibition did not support a pro-apoptotic role. Early ERK activity may be conducive to their survival or promote the trans-differentiation of epithelial cells. In epithelial and endothelial cells, oxidative stress induced pJNK acutely. Pretreatment with SP600125 (JNK inhibitor) verified its pro-apoptotic activity only in epithelial cells. Transforming growth factor-beta1 did not significantly alter mitosis or apoptosis in any of the cell types, nor did it alter MAPK activity. Tumor necrosis factor-alpha caused increased apoptosis with no associated change in MAPK activity. Our results demonstrate renal cell-specific differences in the activation of ERK and JNK following fibrotic insult, which may be useful for targeting excessive fibroblast proliferation in chronic fibrosis.
Resumo:
Governments are challenged by the need to ensure that ageing populations stay active and engaged as they age. Therefore, it is critical to investigate the role of mobility in older people's engagement in out-of-home activities, and to identify the experiences they have within their communities. This research investigates the use of transportation by older people and its implications for their out-of-home activities within suburban environments. The qualitative, mixed-method approach employs data collection methods which include a daily travel diary (including a questionnaire), Global Positioning System (GPS) tracking and semi-structured interviews with older people living in suburban environments in Brisbane, Australia. Results show that older people are mobile throughout the city, and their car provides them with that opportunity to access desired destinations. This ability to drive allows older people to live independently and to assist others who do not drive, particularly where transport alternatives are not as accessible. The ability to transport goods and other people is a significant advantage of the private car over other transport options. People with no access to private transportation who live in low-density environments are disadvantaged when it comes to participation within the community. Further research is needed to better understand the relationship between transportation and participation within the community environment, to assist policy makers and city and transportation planners to develop strategies for age-friendly environments within the community.
Resumo:
As planners work to create more sustainable and liveable urban environments, a priority is to transition away from prioritising the automobile and towards enhancing the pedestrian experience. Thus, this research explores the experience of pedestrian accessibility in inner-urban higher-density Brisbane in Australia, drawing on findings from semi-structured in-depth interviews with 24 residents and over 100 hours of public place observations in three case-study neighbourhoods. The interviews took place in residents homes and explored their experience of higher density living and their neighbourhood, whilst observations were recorded through a combination of methods including photographs, sketch maps, recordings and field journals. Observation locations included retail and commercial space, roads, parkland and open space, with multiple observations at each location. A thematic analysis identified common themes in both interviews and the observations, with this paper focusing on residents’ lived experience in urban built environments. This analysis revealed that pedestrian accessibility is linked to access to local amenities and direct routes, aesthetics, sense of community, ownership of space and safety. In particular, observations revealed how pedestrian accessibility and route-taking works with, against or in spite of the design features of urban environments, as well as the importance of the social use of the built environment. Residents spoke about although walking quick and preferred for local amenities, the decision to walk was moderated by factors such as time of day and perceived safety. Measures to ensure and improve the pedestrian accessibility of urban areas needs to take into account the propensity for people to prefer and improvise direct routes (often to the detriment of traffic safety considerations), the importance of ongoing maintenance and upgrading of walking infrastructure and the importance of aesthetically pleasing and safe walking environments. By combining interviews and observations, this research highlights the current dominance of the automobile culture in Brisbane and the layers of meaning, experiences and complexity hidden within the pedestrian experience.
Resumo:
The purpose of this review is to showcase the present capabilities of ambient sampling and ionisation technologies for the analysis of polymers and polymer additives by mass spectrometry (MS) while simultaneously highlighting their advantages and limitations in a critical fashion. To qualify as an ambient ionisation technique, the method must be able to probe the surface of solid or liquid samples while operating in an open environment, allowing a variety of sample sizes, shapes, and substrate materials to be analysed. The main sections of this review will be guided by the underlying principle governing the desorption/extraction step of the analysis; liquid extraction, laser ablation, or thermal desorption, and the major component investigated, either the polymer itself or exogenous compounds (additives and contaminants) present within or on the polymer substrate. The review will conclude by summarising some of the challenges these technologies still face and possible directions that would further enhance the utility of ambient ionisation mass spectrometry as a tool for polymer analysis. (C) 2013 Elsevier B. V. All rights reserved.
Resumo:
Changes in the molecular structure of polymer antioxidants such as hindered amine light stabilisers (HALS) is central to their efficacy in retarding polymer degradation and therefore requires careful monitoring during their in-service lifetime. The HALS, bis-(1-octyloxy-2,2,6,6-tetramethyl-4-piperidinyl) sebacate (TIN123) and bis-(1,2,2,6,6-pentamethyl-4-piperidinyl) sebacate (TIN292), were formulated in different polymer systems and then exposed to various curing and ageing treatments to simulate in-service use. Samples of these coatings were then analysed directly using liquid extraction surface analysis (LESA) coupled with a triple quadrupole mass spectrometer. Analysis of TIN123 formulated in a cross-linked polyester revealed that the polymer matrix protected TIN123 from undergoing extensive thermal degradation that would normally occur at 292 degrees C, specifically, changes at the 1- and 4-positions of the piperidine groups. The effect of thermal versus photo-oxidative degradation was also compared for TIN292 formulated in polyacrylate films by monitoring the in situ conversion of N-CH3 substituted piperidines to N-H. The analysis confirmed that UV light was required for the conversion of N-CH3 moieties to N-H - a major pathway in the antioxidant protection of polymers - whereas this conversion was not observed with thermal degradation. The use of tandem mass spectrometric techniques, including precursor-ion scanning, is shown to be highly sensitive and specific for detecting molecular-level changes in HALS compounds and, when coupled with LESA, able to monitor these changes in situ with speed and reproducibility. (C) 2013 Elsevier B. V. All rights reserved.
Resumo:
Research background: Ananyi (Going) is an intercultural music project with lyrics sung in Luritja and English, undertaken in collaboration with the Tjupi Band and producer Jeffrey McLaughlin. The project contributes to cultural maintenance for Australian First Nations peoples, and is informed by prior work in this area by scholars including Peter Dunbar-Hall, Chris Gibson and Karl Neuenfeldt. These existing studies have discussed the complexities of intercultural collaboration, and the types of cultural politics that are involved when Indigenous and non-Indigenous musicians and scholars work together on projects of cultural significance. Critical race theory has also informed the creative work, as a means of interpreting the implicit and explicit discourses of race that arise through intercultural creative practice. The project asked the research question, how can collaborative music making contribute to intercultural understanding and the maintenance of Australian First Nations languages and cultures? Research contribution: The project has identified that recorded popular music is important in the maintenance of Luritja language and culture, and that intercultural collaboration in the areas of digital sound production and distribution can assist with cultural maintenance in both local and national contexts. Research significance: The compact disc was released on the CAAMA Music label, and supported through competitive grants from the Australian Government’s Contemporary Music Touring Grant and the Arnhem Land Progress Association (ALPA). The research context of the work is detailed in Brydie-Leigh Bartleet and Gavin Carfoot 2013. "Desert harmony: Stories of collaboration between Indigenous musicians and university students." International Education Journal: Comparative Perspectives 12 (1): 180-196.
Resumo:
This article will discuss the ways in which community service learning programs in music can foster meaningful collaborations between universities and Indigenous communities. Drawing on recent pedagogical literature on service learning and insights from a four-year partnership between Australian Indigenous musicians at the Winanjjikari Music Centre in Tennant Creek and music students from Queensland Conservatorium Griffith University, it will describe how such programs can facilitate significant cross-cultural exchanges between students and Indigenous communities. By drawing on observations and interview data from those involved in the project, this paper argues that these partnerships can both assist communities with activities such as cultural maintenance, and provide students with intercultural experiences that have the potential to transform their understandings of Indigenous culture.
Resumo:
Research background: Circle Stories was a live performance curated by Brydie-Leigh Bartleet, Naomi Sunderland, Gavin Carfoot and the Winanjjikari Music Centre as part of the Desert Harmony Festival 2013. The performance was the culmination of five years of research into intercultural performing arts practice, undertaken in partnership with Barkly Regional Arts. This work has built on existing scholarly work in community service learning by Marilynne Boyle-Baise, approaches to intercultural music making with Australian First Peoples by Karl Neuenfeldt, and studies of Indigenous popular music by Peter Dunbar-Hall and Chris Gibson. The performance followed the popular songwriters’ circle approach, in which Aboriginal musicians and elders presented their songs along with tertiary music students, as part of a broader dialogue with each other and the audience. Each performance provided an opportunity to highlight the importance of music in the development of intercultural knowledge and understanding. The project asked the research question, how can collaborative music performance foster mutual learning, intercultural knowledge and reconciliation? Research contribution: The project development and performance of Circle Stories identified that mutual learning and intercultural knowledge can result most effectively through long-term and meaningful relationships underpinning collaborative creative practice. Research significance: Following a general call for proposals, the performance was peer reviewed and selected for inclusion in the Desert Harmony Festival program. The research context of the work is detailed in Brydie-Leigh Bartleet and Gavin Carfoot 2013. "Desert harmony: Stories of collaboration between Indigenous musicians and university students." International Education Journal: Comparative Perspectives 12 (1): 180-196.
Resumo:
We explored the mediation effect of caregiver self-efficacy on the influences of behavioral and psychological symptoms (BPSD) of dementia care recipients (CRs) or family caregivers’ (CGs) social supports (informational, tangible and affectionate support and positive social interaction) on CGs’ mental health. We interviewed 196 CGs, using a battery of measures including demographic data of the dyads, CRs’ dementia-related impairments, and CGs’ social support, self-efficacy and the Medical Outcome Study (MOS) Short-Form (SF-36) Health Survey. Multiple regression analyses showed that gathering information on self-efficacy and managing CG distress self-efficacy were the partial mediators of the relationship between positive social interaction and CG mental health. Managing caregiving distress self-efficacy also partial mediated the impact of BPSD on CG mental health. We discuss implications of the results for improving mental health of the target population in mainland China.