Design of coreless PCB transformers for power and signal isolation in a modular ADC system for power quality data acquisition

Available industrial energy meters offer high accuracy and reliability, but are typically expensive and low-bandwidth, making them poorly suited to multi-sensor data acquisition schemes and power quality analysis. An alternative measurement system is proposed in this paper that is highly modular, extensible and compact. To minimise cost, the device makes use of planar coreless PCB transformers to provide galvanic isolation for both power and data. Samples from multiple acquisition devices may be concentrated by a central processor before integration with existing host control systems. This paper focusses on the practical design and implementation of planar coreless PCB transformers to facilitate the module's isolated power, clock and data signal transfer. Calculations necessary to design coreless PCB transformers, and circuits designed for the transformer's practical application in the measurement module are presented. The designed transformer and each application circuit have been experimentally verified, with test data and conclusions made applicable to coreless PCB transformers in general.

The potential impact of climate change and ultraviolet radiation on vaccine preventable infectious diseases and immunisation service delivery system

Climate change and solar ultraviolet radiation may affect vaccine-preventable infectious diseases (VPID), the human immune response process and the immunization service delivery system. We systematically reviewed the scientific literature and identified 37 relevant publications. Our study shows that climate variability and ultraviolet radiation may potentially affect VPID and the immunization delivery system through modulating vector reproduction and vaccination effectiveness, possibly influencing human immune response systems to the vaccination, and disturbing immunization service delivery. Further research is needed to determine these affects on climate-sensitive VPID and on human immune response to common vaccines. Such research will facilitate the development and delivery of optimal vaccination programs for target populations, to meet the goal of disease control and elimination.

Prediction of GMA welding characteristic parameter by artificial neural network system

Nowadays, demand for automated Gas metal arc welding (GMAW) is growing and consequently need for intelligent systems is increased to ensure the accuracy of the procedure. To date, welding pool geometry has been the most used factor in quality assessment of intelligent welding systems. But, it has recently been found that Mahalanobis Distance (MD) not only can be used for this purpose but also is more efficient. In the present paper, Artificial Neural Networks (ANN) has been used for prediction of MD parameter. However, advantages and disadvantages of other methods have been discussed. The Levenberg–Marquardt algorithm was found to be the most effective algorithm for GMAW process. It is known that the number of neurons plays an important role in optimal network design. In this work, using trial and error method, it has been found that 30 is the optimal number of neurons. The model has been investigated with different number of layers in Multilayer Perceptron (MLP) architecture and has been shown that for the aim of this work the optimal result is obtained when using MLP with one layer. Robustness of the system has been evaluated by adding noise into the input data and studying the effect of the noise in prediction capability of the network. The experiments for this study were conducted in an automated GMAW setup that was integrated with data acquisition system and prepared in a laboratory for welding of steel plate with 12 mm in thickness. The accuracy of the network was evaluated by Root Mean Squared (RMS) error between the measured and the estimated values. The low error value (about 0.008) reflects the good accuracy of the model. Also the comparison of the predicted results by ANN and the test data set showed very good agreement that reveals the predictive power of the model. Therefore, the ANN model offered in here for GMA welding process can be used effectively for prediction goals.

Robot navigation using human cues: A robot navigation system for symbolic goal-directed exploration

In this paper we present for the first time a complete symbolic navigation system that performs goal-directed exploration to unfamiliar environments on a physical robot. We introduce a novel construct called the abstract map to link provided symbolic spatial information with observed symbolic information and actual places in the real world. Symbolic information is observed using a text recognition system that has been developed specifically for the application of reading door labels. In the study described in this paper, the robot was provided with a floor plan and a destination. The destination was specified by a room number, used both in the floor plan and on the door to the room. The robot autonomously navigated to the destination using its text recognition, abstract map, mapping, and path planning systems. The robot used the symbolic navigation system to determine an efficient path to the destination, and reached the goal in two different real-world environments. Simulation results show that the system reduces the time required to navigate to a goal when compared to random exploration.

Hand, foot and mouth disease in China: Evaluating an automated system for the detection of outbreaks

Objective To evaluate the performance of China’s infectious disease automated alert and response system in the detection of outbreaks of hand, foot and mouth (HFM) disease. Methods We estimated size, duration and delay in reporting HFM disease outbreaks from cases notified between 1 May 2008 and 30 April 2010 and between 1 May 2010 and 30 April 2012, before and after automatic alert and response included HFM disease. Sensitivity, specificity and timeliness of detection of aberrations in the incidence of HFM disease outbreaks were estimated by comparing automated detections to observations of public health staff. Findings The alert and response system recorded 106 005 aberrations in the incidence of HFM disease between 1 May 2010 and 30 April 2012 – a mean of 5.6 aberrations per 100 days in each county that reported HFM disease. The response system had a sensitivity of 92.7% and a specificity of 95.0%. The mean delay between the reporting of the first case of an outbreak and detection of that outbreak by the response system was 2.1 days. Between the first and second study periods, the mean size of an HFM disease outbreak decreased from 19.4 to 15.8 cases and the mean interval between the onset and initial reporting of such an outbreak to the public health emergency reporting system decreased from 10.0 to 9.1 days. Conclusion The automated alert and response system shows good sensitivity in the detection of HFM disease outbreaks and appears to be relatively rapid. Continued use of this system should allow more effective prevention and limitation of such outbreaks in China.

Numerical simulation of railway track supporting system using finite-infinite and thin layer elements under impulsive loads

The present study deals with two dimensional, numerical simulation of railway track supporting system subjected to dynamic excitation force. Under plane strain condition, the coupled finite-infinite elements to represent the near and far field stress distribution and thin layer interface element was employed to model the interfacial behavior between sleepers and ballast. To account for the relative debonding, slipping and crushing that could take place in the contact area between the sleepers and ballast, modified Mohr-Coulomb criterion was adopted. Furthermore an attempt has been made to consider the elasto-plastic material non-linearity of the railway track supporting media by employing different constitutive models to represent steel, concrete and supporting materials. Based on the proposed physical and constitutive modeling a code has been developed for dynamic loads. The applicability of the developed F.E code has been demonstrated by analyzing a real railway supporting structure.

Religion, spirituality, and mental health and social behaviour in young adulthood: A longitudinal study

Background The concept spirituality appears to be gaining increasing attention for its potential relationship to mental health, despite there being an absence of consensus on what spirituality is or whether it can be distinguished from religion (or religiousness) in operational terms. Spirituality is a term that is embraced within secular and non-secular contexts alike. As a consequence, spirituality as a concept encompasses forms of religiosity that are embedded in traditional religion and those that have little or no connection to traditional religious teachings. The emergence of religious/spiritual beliefs that depart from traditional religious thought represents one key feature of widespread religious change in contemporary societies. Non-traditional religious/spiritual beliefs need to be viewed within this context and thus be differentiated from traditional religious/spiritual beliefs when investigating connections between religion, spirituality, and mental health. Aims The current study seeks to compare the mental health of those whose beliefs are rooted in religious tradition with those whose beliefs deviate from traditional religious thought. The two main objectives of this study are: (1) to determine the extent to which religious background predicts endorsement of traditional and non-traditional religious/spiritual beliefs and church attendance in young adulthood, and; (2) to determine whether differential relationships exist between current religiosity, religious background, and mental health in young adulthood, and whether any observed differences are attributable to other characteristics of respondents like sociodemographic factors and health-risk behaviours. Methods Data were derived from the Mater-University of Queensland Study of Pregnancy, a longitudinal, prospective study of maternal and child health from the prenatal period to 21 years post-delivery. Religiosity was assessed among the study children in young adulthood from three items measured at the time of the 21-year follow-up. Religious background was assessed from information provided by the study mothers in earlier phases of the study. Young adult responses to items included in the Young Adult Self Report (Achenbach, 1997) were used to assess cases of anxiety/depression and externalising behaviour, and delusional ideation was assessed from their responses to the 21-item Peters et al. Delusions Inventory (PDI) (Peters & Garety, 1996). Results Belief in a spiritual or higher power other than God was found to be positively related to anxiety/depression, disturbed ideation, suspiciousness and paranormal ideation, high total PDI scores, as well as antisocial behaviour in young adulthood, regardless of gender. These associations persisted after adjustment for potential confounders. By contrast, young adults who maintain a traditional belief in God appear to be no different to those who reject this belief in regard to anxiety/depression. Belief in God was found to have no association with antisocial behaviour for males, but was observed to have a weak negative relationship with antisocial behaviour for females. This association failed to reach statistical significance however, after adjustment for other religious/spiritual and social characteristics. No associations were found between young adult belief in God and disturbed, suspicious or paranormal ideation, although a positive relationship was identified for high total PDI scores. Weekly church attendance was observed to reduce the likelihood of antisocial behaviour in young adulthood among males, but not females. Religious ideation was found to more prevalent among young adults who attend church on either a weekly or infrequent basis. No long-term effects on anxiety/depression or antisocial behaviour were evident from maternal belief in God, church attendance or religious affiliation in the young adults’ early lives. However, maternal church attendance predicted religious ideation in young adulthood. Offspring of mothers affiliated with a Pentecostal church in the prenatal period appear to have a high rate of religious ideation and high total PDI scores. Paranormal ideation in young adulthood appears to have no association with maternal religiosity in a young adult’s early life. Conclusion The findings from this study suggest that young adults who endorse non-traditional religious/spiritual beliefs are at greater risk for poorer mental health and aberrant social behaviour than those who reject these beliefs. These results suggest that a non-traditional religious/spiritual belief system involves more than mere rejection of traditional religious doctrine. This system of belief may be a marker for those who question the legitimacy of established societal norms and values, and whose thoughts, attitudes and actions reflect this position. This possibility has implications for mental health and wellbeing at both an individual and a societal level and warrants further research attention.

Application of a Bayesian Network complex system model to a successful community electricity demand reduction program

Utilities worldwide are focused on supplying peak electricity demand reliably and cost effectively, requiring a thorough understanding of all the factors influencing residential electricity use at peak times. An electricity demand reduction project based on comprehensive residential consumer engagement was established within an Australian community in 2008, and by 2011, peak demand had decreased to below pre-intervention levels. This paper applied field data discovered through qualitative in-depth interviews of 22 residential households at the community to a Bayesian Network complex system model to examine whether the system model could explain successful peak demand reduction in the case study location. The knowledge and understanding acquired through insights into the major influential factors and the potential impact of changes to these factors on peak demand would underpin demand reduction intervention strategies for a wider target group.

Numerical modeling of railway track supporting system using finite–infinite and thin layer elements

The present contribution deals with the numerical modelling of railway track-supporting systems-using coupled finite-infinite elements-to represent the near and distant field stress distribution, and also employing a thin layer interface element to account for the interfacial behaviour between sleepers and ballast. To simulate the relative debonding, slipping and crushing at the contact area between sleepers and ballast, a modified Mohr-Coulomb criterion was adopted. Further more an attempt was made to consider the elasto plastic materials’ non-linearity of the railway track supporting media by employing different constitutive models to represent steel, concrete and other supporting materials. It is seen that during an incremental-iterative mode of load application, the yielding initially started from the edge of the sleepers and then flowed vertically downwards and spread towards the centre of the railway supporting system.

Licensing system in Oman and literature review. Report to the Research Council of Oman, Muscat

This document reviews the existing literature in the area of novice driver behaviour and the impact of Graduated Driver Licencing (GDL) as a key response to young driver management. The document focuses on consolidating the available research evidence and identifying existing gaps in the current knowledge. The chapter reviews novice driver crash risk, the factors that influence novice driver behaviour, countermeasures used to address the problem, the learner phase, the provisional phase, The Australian example of GDL, compliance with the road laws and parental involvement in the GDL process...

System design for a small autonomous helicopter

The detailed system design of a small experimental autonomous helicopter is described. The system requires no ground-to-helicopter communications and hence all automation hardware is on-board the helicopter. All elements of the system are described including the control computer, the flight computer (the helicopter-to-control-computer interface), the sensors and the software. A number of critical implementation issues are also discussed.

Rejected! The harmful effects of workgroup mistreatment and the moderating role of organisational norms

This program of research investigated the harmful effects of mistreatment by the workgroup, and the role of perceived rejection as a critical mediator linking mistreatment and outcomes. This research program had three primary purposes. First, the research aimed to examine the important role of workgroup mistreatment as an independent predictor of negative outcomes, over and above the influence of supervisor mistreatment. Second, the research aimed to examine the effect of perceived rejection as an explanatory variable linking workgroup mistreatment and outcomes. Finally, the moderating effect of organizational norms on the relationship between workgroup mistreatment and perceived rejection was examined. The relationships of interest were examined over four studies, using multiple methods of data collection, across part-time and full-time working samples. In Study 1 (Chapter 2), the independent role of workgroup mistreatment and the mediating role of perceived rejection were examined. One hundred and forty two part-time working participants took part in the study. The participants completed a questionnaire on workplace behaviors in their organizations. The results of hierarchical regression analyses revealed a strong harmful effect of workgroup mistreatment, independent of mistreatment by the supervisor. In addition, the results showed that perceived rejection fully mediated the relationship between workgroup mistreatment and depression and organizational based self esteem. The study highlighted that perceived rejection acts as a key underlying psychological mechanism involved in the effect of workgroup mistreatment. This study has been published in the Journal of Occupational Health Psychology. Study 2 and Study 3 were presented as one paper in Chapter 3. The aims of these two studies was to explore the effects of workgroup mistreatment on a wider range of individual and organizational level outcomes, and to provide further evidence of the mediating role of perceived rejection as observed in Study 1. The results from both studies demonstrated that workgroup mistreatment had a significant and independent role in predicting negative individual and organizational level outcomes, providing support for the findings of Study 1. In the first study, 189 participants received scenarios manipulating workgroup mistreatment and supervisor mistreatment. The results of hierarchical regression analyses revealed that workgroup mistreatment harmfully affected participants, over and above that of the supervisor. The results also demonstrated that perceived rejection mediated the positive relationships between workgroup mistreatment and depression and organizational deviance, and also the negative relationships between workgroup mistreatment and organizational based self esteem and organizational citizenship behaviors. The second study included an additional aim, to examine the moderating role of supportive organizational norms. Two hundred and twenty nine participants read scenarios that manipulated workgroup mistreatment, supervisor mistreatment and organizational norms. The results of hierarchical regression analyses revealed the significant harmful effects of workgroup mistreatment, over and above the influence of supervisor mistreatment. The results also revealed the mediating role of perceived rejection. The direct effect of positive organizational norms also emerged, consistent with previous research. In addition, the result revealed that employees who experienced supportive organizational norms were more likely to reconcile with their workgroup members after experiencing mistreatment compared to employees who experienced hostile organizational norms. Finally, an unexpected pattern on the key affective variables of depression and organizational based self esteem emerged, such that mistreatment led to more negative outcomes in the supportive norms condition than in the hostile condition, where employees appeared to be desensitized. This paper is currently under review at the Journal of Applied Social Psychology. In Study 4 (Chapter 4), the overall model of workplace mistreatment was tested on a sample of full-time workers in an applied setting. One hundred and seventy two adults took part in the study. Participants were required to evaluate their workplace regarding mistreatment and organizational norms and to report their own psychological, behavioral and organizational outcomes. The results revealed that workgroup mistreatment was associated with increased depression, stress and avoidance, over and above supervisor mistreatment. In addition, the results revealed that perceived rejection acted as an explanatory variable linking workgroup mistreatment to a number of outcomes. Furthermore, the moderating role of hostile organizational norms emerged on depression, stress, reconciliation and avoidance. This paper is currently under review at the Journal of Occupational Health Psychology. Overall, the four studies provided empirical support for the majority of the hypotheses. The effects were demonstrated for a range of psychological, behavioral, and organizational level outcomes, using multiple methods of data collection, across part-time and full-time workers. At the conclusion of the thesis (Chapter 5), an overall summary is provided of the findings across all four studies, practical and theoretical implications and research directions.

Feeling left out? The mediating role of perceived rejection on workgroup mistreatment and affective, behavioral, and organizational outcomes and the moderating role of organizational norms

This two-study paper examines the detrimental impact of workgroup mistreatment and the mediating role of perceived rejection. In Study 1, perceived rejection emerged as a mediator between workgroup mistreatment and depression, organization-based self-esteem, organizational deviance, and organizational citizenship behaviors. In Study 2, the role of organizational norms was examined. Employees who experienced supportive organizational norms reported lower levels of perceived rejection, depression and turnover intentions, and higher levels of organization-based self-esteem and job satisfaction. Employees in the supportive norms condition reported that they were more likely to seek reconciliation after experiencing mistreatment than those who experienced low support. Perceived rejection also emerged as a mediator. Results, practical implications, and future research directions are discussed.

The Complex Politics of Care: Needs and interests, norms and desires

If you want to understand something about a society, and the social contracts that underpin it, then understanding the way it positions women, children, those with corporeal or cognitive differences and other not-quitecitizens is a good place to start. As most now understand, this positioning is not natural; it is part of the high-stakes social, institutional and above all ideological labour of defining the human body, directing human behaviour and determining who will hold agency, authority and power...