Lobbying by ethnic groups and aid allocation

We develop a political-economic model of foreign aid allocation. Each ethnic group in the donor country lobbies the government to allocate more aid to its country of origin, and the government accepts political contributions from lobby groups. Initial per-capita income of the recipients and those of the ethnic groups are shown to be important determinants of the solution of the political equilibrium. We also examine the effects of changes in the degree of corruption, aid fatigue, and ethnic composition, in the donor country on the allocation of aid.

Logic of aid in an intertemporal setting

The paper studies the welfare implications of temporary foreign aid in the context of a simple two-country model of trade. In addition to its usual effects, a transfer of income in one period is assumed to influence the preferences of the recipient country in the following period. The implied changes in the terms of trade over the two periods are consistent with a number of possible outcomes with respect to the intertemporal welfare of the donor, the recipient, and the world as a whole. Particular attention is devoted to the conditions for strict Pareto improvement and the circumstances under which temporary aid transactions are likely to occur.

On the tying of aid to tariff reform

This paper considers the welfare effects of foreign aid that is tied to changes in the recipient's tariff. By constructing a three-country model with tariffs, and by allowing for changes both in the amount of aid and in the tariff rates, we are able to consider the welfare implications of two different rules of aid conditionality: (i) a rule which leaves the donor's welfare unchanged, and (ii) a rule which leaves the recipient government's total revenue unchanged. It is shown that the tying of aid to a tariff reform can, inter alia, be used to ensure Pareto improvement.

Optimal foreign aid and tariffs

This paper investigates the optimal choice of foreign aid when trade policies are decided in a non-cooperative fashion. Three alternative scenarios, depending on the timing of the actions and on whether aid is tied, are analyzed. It is shown that, in the case where aid is decided before tariffs, untied aid can lead to the reduction of the recipient's optimal trade tax. When the donor can tie the aid to a reduction in the recipient's tariff, the optimal aid level is always positive and the world can always achieve a Pareto-efficient equilibrium.

The politics of foreign aid: A median voter perspective

The paper presents a model where the median voter in the donor country determines the support of foreign aid. It is first established that an individual in the donor country is affected by the direct benefits (due to altruism) and costs (due to taxes) of giving aid, and by the indirect benefits or costs of a change in the terms of trade. Then it is shown that the latter effect works through changing both the donor country's average income and its distribution of income. Given the stylized facts of a capital-abundant donor country and relatively capital-poor median voter, it is shown how redistribution-of-income effects soften the impact of terms-of-trade changes on the political support for foreign aid.

Tied aid, unemployment and welfare

The effect of foreign aid on the welfare levels of both the recipient and the donor country has been a much analysed topic for research in both the theory of international trade and development economics. In the development economics literature, concerns have been raised since the 1960s on the possible adverse effect of foreign aid on domestic savings and growth.1 The trade theory literature in this respect is much older and dates back to the 1920s when Professors Keynes and Ohlin debated on the effect of foreign aid on international terms of trade.2 Ever since, the terms of trade effect has been the cornerstone in the analysis of the welfare effect of foreign aid in the trade theory literature.3 After some early confusion, it is now well established that in a Walrasian stable world economy with two countries, a necessary condition for foreign aid to have perverse effects is that there is some distortion in either of the two countries.4 It is also known that, under normality and substitutability of goods, untied aid cannot be strictly Pareto-improving in a tariff distorted world.5

Welfare effects of aid under quantitative trade restrictions

The paper examines the effects of tied-aid on the welfare of both the donor and the recipient countries. We depart from the previous literature by assuming preexistence of quantitative trade distortions. To mitigate these distortions the donor country provides aid that is tied to the rationed good. Conditions for the presence of the transfer paradox and of the enrichment of both countries are derived and interpreted under the stability of the system. Furthermore, we show that whereas untied aid cannot increase global welfare, tied-aid unambiguously does so.

Knowledge management research in the construction industry: a review

Purpose: Knowledge management (KM) is important to the knowledge-intensive construction industry. The diversified and changing nature of works in this field warrants us to stocktake, identify changes and map out KM research framework for future exploration. Design/methodology/approach: The study involves three aspects. First, three stages of KM research in construction were distinguished in terms of the time distribution of 217 target publications. Major topics in the stages were extracted for understanding the changes of research emphasis from evolutionary perspective. Second, the past works were summed up in a three-dimensional research framework in terms of management organization, managerial methodology and approach, and managerial objective. Finally, potential research orientations in the future were predicted to expand the existing research framework. Findings: It was found that (1) KM research has significantly blossomed in the last two decades with a great potential; (2) major topics of KM were changing in terms of technology, technique, organization, attribute of knowledge and research objectives; (3) past KM studies centred around management organization, managerial methodology and approach, and managerial objective thus a three-dimensional research framework was proposed; (4) within the research framework, team-level, project-level and firm-level KM were studied to achieve project, organizational and competitive objectives by integrated methodologies of information technology, social technique and KM process tool; and (5) nine potential research orientations were predicted corresponding to the three dimensions. Finally, an expanded research framework was proposed to encourage and guide future research works in this field. Research limitations/implications: The paper only focused on the construction industry. The findings need further exploration in order to discover any possible missing important research works which were not published in English or not included in the time period. Originality/value: The paper formed a systematic framework of KM research in construction and predicted the potential research orientations. It provides much value for the researchers who want to understand the past and the future of global KM research in the construction industry.

Coaching knowledge, learning and mentoring in the Australian Football League

Understanding the work of Senior and Assistant Coaches in the AFL is important to better develop the next generation of performance coaches. Hence the focus of this research was to examine the knowledge, competences and learning of senior and assistant coaches in the Australian Football League. Specifically, the research sought to understand the ways in which Senior and Assistant Coaches in the AFL have come to know their “craft” with the particular aim of enhancing future coaching practice. Performance coaching is generally regarded as a cognitive activity and therefore “getting inside the heads” of AFL coaches will assist in our understanding of the complex coaching work in which they are engaged. In-depth interviews provided coaches an opportunity to reflect on their practices and how they learned their craft. Fundamental to this research was an understanding that the AFL and each club within the league be regarded as learning organizations and workplaces where learning takes place. Moreover the process of mentoring is regarded as a central learning process and a significant factor contributing to improved professional coaching practice. This applied research aims to inform coach development in Australian football, the annual review process (quality of performance) of employed coaches, and the recruitment of coaches in the AFL. Improving the quality of coaching in the AFL will, in turn, improve the performance of the players and teams, and subsequently enhance the continued development and sustainability of the game.

Editorial: Dimensions of knowledge-based urban development

This issue marks the beginning of a new editorial cycle. In the seventh volume of the journal the editorial team will continue collating novel scientific and social developments in the broader field of ‘knowledge-based development’ to report to our readers. In this perspective, the first issue of the volume focuses on different dimensions of knowledge-based urban development. As Gabe et al. (2012, p.1179) indicate, “[i]t would be an understatement to suggest that knowledge plays a key role in today’s economy; for much of the developed world, it might be more accurate to assert that knowledge is today’s economy”. Thus, knowledge generation has been a priority for global city administrations, and there is a growing consensus amongst scholars, planners, politicians and industrialists in identifying knowledge-based urban development as a panacea to the burgeoning economic problems (Knight, 1995; Kunzmann, 2009; Yigitcanlar, 2010, 2011; Huggins and Strakova, 2012; Lönnqvist et al., 2014). Although, in the era of global knowledge economy, knowledge-based urban development is a critical factor for economic success (Pratt, 2000; Sheppard, 2002), it is not solely an economic policy. For many, knowledge-based urban development is a policy that targets building an urban setting to form perfect climates for business, people, and governance in an environmentally friendly atmosphere (Carrillo, 2006; Ergazakis et al., 2006; Angelidou et al., 2012). Each of these climates correspond to a dimension or domain of knowledge-based urban development – namely, economy, society, space, and governance (Carrillo et al., 2014). Each paper of this issue corresponds to at least one of these domains, or policy areas.

The tired foot. The effects of physical activity, energy expenditure and sleep on the diabetic foot population

Background The most common pathway to development of diabetes foot ulcers is repetitive daily activity stress on the plantar surface of the neuropathic foot. Studies suggest an association between different diabetic foot complications and physical activity. However, to the best of the authors knowledge the steps/day and sleep patterns of people with diabetic foot ulcers has yet to be investigated. This observational study aims to investigate the physical activity and sleep patterns of three groups of adults with type 2 diabetes and different foot complications Methods Participants with type 2 diabetes were recruited into three groups: 1. those with no reported foot complications (DNIL), 2. those with diagnosis of neuropathy (DPN) and 3. those with a neuropathic ulcer (DFU). Exclusion criteria included peripheral arterial disease and mobility aid use. Participants wore a SenseWear Pro 3 Armband continuously for 7 days and completed an Epworth Sleepiness Scale. The Armband is a validated automated measure of activity (walking steps, average Metabolic Equivalent Task (MET), physical activity (>3 METs) duration), energy expenditure(kJ) (total and physical activity (>3 METs)) and sleep (duration). Data on age, sex, BMI, diabetes duration and HbA1c were also collected. Results Sixty-Six (14 DNIL, 22 DPN and 30 DFU's participants were recruited; 71% males, mean age 61(±12) years, diabetes duration 13(±9) years, HbA1c 8.3(±2.8), BMI 32.6(±5.9), average METs 1.2(0.2). Significant differences were reported in mean(SD) steps/day (5,859(±2,381) in DNIL; 5,007(±3,349) in DPN and 3,271(±2,417) in DFU's and daily energy expenditure (10,868(±1,307)kJ in DNIL; 11,060(±1,916)kJ in DPN and 13,006(± 3,559) in DFU's(p <0.05). No significant differences were reported for average METs, physical activity duration or energy expenditure, sleep time or Epworth score (p>0.1). Conclusions Preliminary findings suggest people with diabetes are sedentary. Results indicate that patients with a diabetic foot ulcer work significantly less than those with neuropathy or nil complications and use significantly more energy to do so. Sleep Parameters showed no differences. Recruitment is still on going.

Lowering grain boundary resistance of BaZr0.8Y0.2O3−δ with LiNO3 sintering-aid improves proton conductivity for fuel cell operation

A novel sintering additive based on LiNO3 was used to overcome the drawbacks of poor sinterability and low grain boundary conductivity in BaZr0.8Y0.2O3-δ (BZY20) protonic conductors. The Li-additive totally evaporated during the sintering process at 1600°C for 6 h, which led to highly dense BZY20 pellets (96.5% of the theoretical value). The proton conductivity values of BZY20 with Li sintering-aid were significantly larger than the values reported for BZY sintered with other metal oxides, due to the fast proton transport in the "clean" grain boundaries and grain interior. The total conductivity of BZY20-Li in wet Ar was 4.45 × 10-3 S cm-1 at 600°C. Based on the improved sinterability, anode-supported fuel cells with 25 μm-thick BZY20-Li electrolyte membranes were fabricated by a co-firing technique. The peak power density obtained at 700°C for a BZY-Ni/BZY20-Li/La0.6Sr0.4Co0.2Fe 0.8O3-δ (LSCF)-BZY cell was 53 mW cm-2, which is significantly larger than the values reported for fuel cells using electrolytes made of BZY sintered with the addition of ZnO and CuO, confirming the advantage of using Li as a sintering aid.

Knowledge unlatched : A global library consortium model for funding Open Access scholarly books

Specialist scholarly books, including monographs, allow researchers to present their work, pose questions and to test and extend areas of theory through long-form writing. In spite of the fact that research communities all over the world value monographs and depend heavily on them as a requirement of tenure and promotion in many disciplines, sales of this kind of book are in free fall, with some estimates suggesting declines of as much as 90% over twenty years (Willinsky 2006). Cashstrapped monograph publishers have found themselves caught in a negative cycle of increasing prices and falling sales, with few resources left to support experimentation, business model innovation or engagement with digital technology and Open Access (OA). This chapter considers an important attempt to tackle failing markets for scholarly monographs, and to enable the wider adoption of OA licenses for book-length works: the 2012 – 2014 Knowledge Unlatched pilot. Knowledge Unlatched is a bold attempt to reconfigure the market for specialist scholarly books: moving it beyond the sale of ‘content’ towards a model that supports the services valued by scholarly and wider communities in the context of digital possibility. Its success has powerful implications for the way we understand copyright’s role in the creative industries, and the potential for established institutions and infrastructure to support the open and networked dynamics of a digital age.

Supporting knowledge-intensive construction management tasks in BIM

The delivery of products and services for construction-based businesses is increasingly becoming knowledge-driven and information-intensive. The proliferation of building information modelling (BIM) has increased business opportunities as well as introduced new challenges for the architectural, engineering and construction and facilities management (AEC/FM) industry. As such, the effective use, sharing and exchange of building life cycle information and knowledge management in building design, construction, maintenance and operation assumes a position of paramount importance. This paper identifies a subset of construction management (CM) relevant knowledge for different design conditions of building components through a critical, comprehensive review of synthesized literature and other information gathering and knowledge acquisition techniques. It then explores how such domain knowledge can be formalized as ontologies and, subsequently, a query vocabulary in order to equip BIM users with the capacity to query digital models of a building for the retrieval of useful and relevant domain-specific information. The formalized construction knowledge is validated through interviews with domain experts in relation to four case study projects. Additionally, retrospective analyses of several design conditions are used to demonstrate the soundness (realism), completeness, and appeal of the knowledge base and query-based reasoning approach in relation to the state-of-the-art tools, Solibri Model Checker and Navisworks. The knowledge engineering process and the methods applied in this research for information representation and retrieval could provide useful mechanisms to leverage BIM in support of a number of knowledge intensive CM/FM tasks and functions.