Australian pharmacists' self-perceptions in relation to the 'Advanced Pharmacy Practice Framework'

Background The Australian Pharmacy Practice Framework was developed by the Advanced Pharmacy Practice Steering Committee and endorsed by the Pharmacy Board of Australia in October 2012. The Steering Committee conducted a study that found practice portfolios to be the preferred method to assess and credential Advanced Pharmacy Practitioner, which is currently being piloted by the Australian Pharmacy Council. Credentialing is predicted to open to all pharmacists practising in Australia by November 2015. Objective To explore how Australian pharmacists self-perceived being advanced in practice and how they related their level of practice to the Australian Advanced Pharmacy Practice Framework. Method This was an explorative, cross-sectional study with mixed methods analysis. Advanced Pharmacy Practice Framework, a review of the recent explorative study on Advanced Practice conducted by the Advanced Pharmacy Practice Framework Steering Committee and semi-structured interviews (n = 10) were utilized to create, refine and pilot the questionnaire. The questionnaire was advertised across pharmacy-organizational websites via a purposive sampling method. The target population were pharmacists currently registered in Australia. Results Seventy-two participants responded to the questionnaire. The participants were mostly female (56.9%) and in the 30–40 age group (26.4%). The pharmacists self-perceived their levels of practice as either entry, transition, consolidation or advanced, with the majority selecting the consolidation level (38.9%). Although nearly half (43.1%) of the participants had not seen the Framework beforehand, they defined Advanced Pharmacy Practice similarly to the definition outlined in the Framework, but also added specialization as a requirement. Pharmacists explained why they were practising at their level of practice, stating that not having more years of practice, lacking experience, or postgraduate/post-registration qualifications, and more involvement and recognition in practice were the main reasons for not considering themselves as an Advanced Pharmacy Practitioner. To be considered advanced by the Framework, pharmacists would need to fulfill at least 70% of the Advanced Practice competency standards at an advanced level. More than half of the pharmacists (64.7%) that self-perceived as being advanced managed to fulfill 70% or more of these Advanced Practice competency standards at the advanced level. However, none of the self-perceived entry level pharmacists managed to match at least 70% of the competencies at the entry level. Conclusion Participants' self-perception of the term Advanced Practice was similar to the definition in the Advanced Pharmacy Practice Framework. Pharmacists working at an advanced level were largely able to demonstrate and justify their reasons for being advanced practitioners. However, pharmacists practising at the other levels of practice (entry, transition, consolidation) require further guidance regarding their advancement in practice.

The genetic association between personality and major depression or bipolar disorder. A polygenic score analysis using genome-wide association data

The relationship between major depressive disorder (MDD) and bipolar disorder (BD) remains controversial. Previous research has reported differences and similarities in risk factors for MDD and BD, such as predisposing personality traits. For example, high neuroticism is related to both disorders, whereas openness to experience is specific for BD. This study examined the genetic association between personality and MDD and BD by applying polygenic scores for neuroticism, extraversion, openness to experience, agreeableness and conscientiousness to both disorders. Polygenic scores reflect the weighted sum of multiple single-nucleotide polymorphism alleles associated with the trait for an individual and were based on a meta-analysis of genome-wide association studies for personality traits including 13,835 subjects. Polygenic scores were tested for MDD in the combined Genetic Association Information Network (GAIN-MDD) and MDD2000+ samples (N=8921) and for BD in the combined Systematic Treatment Enhancement Program for Bipolar Disorder and Wellcome Trust Case-Control Consortium samples (N=6329) using logistic regression analyses. At the phenotypic level, personality dimensions were associated with MDD and BD. Polygenic neuroticism scores were significantly positively associated with MDD, whereas polygenic extraversion scores were significantly positively associated with BD. The explained variance of MDD and BD, approximately 0.1%, was highly comparable to the variance explained by the polygenic personality scores in the corresponding personality traits themselves (between 0.1 and 0.4%). This indicates that the proportions of variance explained in mood disorders are at the upper limit of what could have been expected. This study suggests shared genetic risk factors for neuroticism and MDD on the one hand and for extraversion and BD on the other.

Regenerative sustainability for the built environment – from vision to reality: An introductory chapter

Regenerative sustainability is emerging as an alternative discourse around the transition from a ‘mechanistic’ to an ‘ecological’ or living systems worldview. This view helps us to re-conceptualize relationships among humans’ technological, ecological, economic, social and political systems. Through exploration of ‘net positive’ or ‘regenerative’ development lenses and the traditional sustainability literature, the conceptualization and approaches to achieve sustainable development and ecological modernization are expanded to articulate and to explore the evolving sustainability discourse, ‘regenerative sustainability’. This Special Volume of Journal of Cleaner Production (SV) is focused upon various dimensions of regenerative sustainability (e.g. regenerative design, regenerative development, and positive development) applied to the urban built environment at scales, which range from individual buildings, neighborhoods, and urban developments to integrated regional sustainable development. The main focus is on how these approaches and developments are evolving, how they can help us to prevent or adapt to climate change and how these approaches are likely to evolve in the next two to three decades. These approaches are addressed in four themes: (1) reviewing the theoretical development of the discourse of regenerative sustainability, its emerging principles and practices, (2) explaining how it can be measured and monitored, (3) providing encouraging practical pathways and examples of its implementation in multiple cultural and climatic contexts, and (4) mapping obstacles and enablers that must be addressed to help to ensure that more rapid progress is made in implementing the transitions towards an urban built environment that supports genuinely sustainable societies.

Real-time locating systems applications in construction

Real-time locating systems (RTLSs) are considered an effective way to identify and track the location of an object in both indoor and outdoor environments. Various RTLSs have been developed and made commercially available in recent years. Research into RTLSs in the construction sector is ubiquitous and results have been published in many construction-related academic journals over the past decade. A succinct and systematic review of current applications would help academics, researchers and industry practitioners in identifying existing research deficiencies and therefore future research directions. However, such a review is lacking to date. This paper provides a framework for understanding RTLS research and development in the construction literature over the last decade. The research opportunities and directions of construction RTLS are highlighted. Background information relating to construction RTLS trends, accuracy, deployment, cost, purposes, advantages and limitations is provided. Four major research gaps are identified and research opportunities and directions are highlighted.

Improving the estimation of probability of bidder participation in procurement auctions

Anticipating the number and identity of bidders has significant influence in many theoretical results of the auction itself and bidders’ bidding behaviour. This is because when a bidder knows in advance which specific bidders are likely competitors, this knowledge gives a company a head start when setting the bid price. However, despite these competitive implications, most previous studies have focused almost entirely on forecasting the number of bidders and only a few authors have dealt with the identity dimension qualitatively. Using a case study with immediate real-life applications, this paper develops a method for estimating every potential bidder’s probability of participating in a future auction as a function of the tender economic size removing the bias caused by the contract size opportunities distribution. This way, a bidder or auctioner will be able to estimate the likelihood of a specific group of key, previously identified bidders in a future tender.

Internet marketing capabilities and international market growth

The Internet has been shown to facilitate elements of internationalisation such as information accumulation and network opportunities. However, there is limited understanding of how the Internet combined with marketing capabilities drives international market growth. This study, based on a sample of 224 Australian firms, develops and tests, using structural equation modelling (SEM), a conceptual model of Internet marketing capabilities and international market growth. Results indicate that firms deploying Internet marketing capabilities will benefit due to the reduction of information uncertainty and increased capacity to develop international network capabilities. Moreover, Internet marketing capabilities indirectly lead to international market growth when the firm has a high level of international strategic orientation and international network capabilities. Overall, Internet marketing capabilities enhance the firm's ability to generate other internal capabilities within the firm, which in turn have a positive impact on the international market growth of the firm.

Optical and surface characterization of radio frequency plasma polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films

Low pressure radio frequency plasma-assisted deposition of 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films was investigated for different polymerization conditions. Transparent, environmentally stable and flexible, these organic films are promising candidates for organic photovoltaics (OPV) and flexible electronics applications, where they can be used as encapsulating coatings and insulating interlayers. The effect of deposition RF power on optical properties of the films was limited, with all films being optically transparent, with refractive indices in a range of 1.57–1.58 at 500 nm. The optical band gap (Eg) of ~3 eV fell into the insulating Eg region, decreasing for films fabricated at higher RF power. Independent of deposition conditions, the surfaces were smooth and defect-free, with uniformly distributed morphological features and average roughness between 0.30 nm (at 10 W) and 0.21 nm (at 75 W). Films fabricated at higher deposition power displayed enhanced resistance to delamination and wear, and improved hardness, from 0.40 GPa for 10 W to 0.58 GPa for 75 W at a load of 700 μN. From an application perspective, it is therefore possible to tune the mechanical and morphological properties of these films without compromising their optical transparency or insulating property.

Wetting, solubility and chemical characteristics of plasma-polymerized 1-isopropyl-4-methyl-1,4-cyclohexadiene thin films

Investigations on the wetting, solubility and chemical composition of plasma polymer thin films provide an insight into the feasibility of implementing these polymeric materials in organic electronics, particularly where wet solution processing is involved. In this study, thin films were prepared from 1-isopropyl-4-methyl-1,4-cyclohexadiene (γ-Terpinene) using radio frequency (RF) plasma polymerization. FTIR showed the polymers to be structurally dissimilar to the original monomer and highly cross-linked, where the loss of original functional groups and the degree of cross-linking increased with deposition power. The polymer surfaces were hydrocarbon-rich, with oxygen present in the form of O–H and C=O functional groups. The oxygen content decreased with deposition power, with films becoming more hydrophobic and, thus, less wettable. The advancing and receding contact angles were investigated, and the water advancing contact angle was found to increase from 63.14° to 73.53° for thin films prepared with an RF power of 10 W to 75 W. The wetting envelopes for the surfaces were constructed to enable the prediction of the surfaces’ wettability for other solvents. The effect of roughness on the wetting behaviour of the films was insignificant. The polymers were determined to resist solubilization in solvents commonly used in the deposition of organic semiconducting layers, including chloroform and chlorobenzene, with higher stability observed in films fabricated at higher RF power.

Implantable devices: issues and challenges

Ageing population and a multitude of neurological and cardiovascular illnesses that cannot be mitigated by medication alone have resulted in a significant growth in the number of patients that require implantable electronic devices. These range from sensors, gastric and cardiac pacemakers, cardioverter defibrillators, to deep brain, nerve, and bone stimulators. Long-term implants present specific engineering challenges, including low energy consumption and stable performance. Resorbable electronics may offer excellent short-term performance without the need for surgical removal. However, most electronic materials have poor bio- and cytocompatibility, resulting in immune reactions and infections. This paper reviews the current situation and highlights challenges for future advancements.

The effect of polyterpenol thin film surfaces on bacterial viability and adhesion

The nanometer scale surface topography of a solid substrate is known to influence the extent of bacterial attachment and their subsequent proliferation to form biofilms. As an extension of our previous work on the development of a novel organic polymer coating for the prevention of growth of medically significant bacteria on three-dimensional solid surfaces, this study examines the effect of surface coating on the adhesion and proliferation tendencies of Staphylococcus aureus and compares to those previously investigated tendencies of Pseudomonas aeruginosa on similar coatings. Radio frequency plasma enhanced chemical vapor deposition was used to coat the surface of the substrate with thin film of terpinen-4-ol, a constituent of tea-tree oil known to inhibit the growth of a broad range of bacteria. The presence of the coating decreased the substrate surface roughness from approximately 2.1 nm to 0.4 nm. Similar to P. aeruginosa, S. aureus presented notably different patterns of attachment in response to the presence of the surface film, where the amount of attachment, extracellular polymeric substance production, and cell proliferation on the coated surface was found to be greatly reduced compared to that obtained on the unmodified surface. This work suggests that the antimicrobial and antifouling coating used in this study could be effectively integrated into medical and other clinically relevant devices to prevent bacterial growth and to minimize bacteria-associated adverse host responses.

Common variation in the CYP17A1 and IFIT1 genes on chromosome 10 does not contribute to the risk of endometriosis

Endometriosis is a complex disease involving multiple susceptibility genes and environmental factors. Our previous studies on endometriosis identified a region of significant linkage on chromosome 10q. Two biological candidate genes (CYP17A1 and IFIT1) located on chromosome 10q, have previously been implicated in endometriosis and/or uterine function. We hypothesized that variation in CYP17A1 and/or IFIT1 could contribute to the risk of endometriosis and may account for some of the linkage signal on chromosome 10q. We genotyped 17 single nucleotide polymorphisms (SNPs) in the CYP17A1 and IFIT1 genes including SNP rs743572 previously associated with endometriosis in 768 endometriosis cases and 768 unrelated controls. We found no evidence for association between endometriosis and individual SNPs or SNP haplotypes in CYP17A1 and IFIT1. Common variation in these genes does not appear to be a major contributor to endometriosis susceptibility in our Australian sample.

Time evolution of graphene growth on SiC as a function of annealing temperature

We followed by X-ray Photoelectron Spectroscopy (XPS) the time evolution of graphene layers obtained by annealing 3C SiC(111)/Si(111) crystals at different temperatures. The intensity of the carbon signal provides a quantification of the graphene thickness as a function of the annealing time, which follows a power law with exponent 0.5. We show that a kinetic model, based on a bottom-up growth mechanism, provides a full explanation to the evolution of the graphene thickness as a function of time, allowing to calculate the effective activation energy of the process and the energy barriers, in excellent agreement with previous theoretical results. Our study provides a complete and exhaustive picture of Si diffusion into the SiC matrix, establishing the conditions for a perfect control of the graphene growth by Si sublimation.

Feasibility of a stepped wedge cluster RCT and concurrent observational sub-study to evaluate the effects of modified ward night lighting on inpatient fall rates and sleep quality: A protocol for a pilot trial

Background: Falls among hospitalised patients impose a considerable burden on health systems globally and prevention is a priority. Some patient-level interventions have been effective in reducing falls, but others have not. An alternative and promising approach to reducing inpatient falls is through the modification of the hospital physical environment and the night lighting of hospital wards is a leading candidate for investigation. In this pilot trial, we will determine the feasibility of conducting a main trial to evaluate the effects of modified night lighting on inpatient ward level fall rates. We will test also the feasibility of collecting novel forms of patient level data through a concurrent observational sub-study. Methods/design: A stepped wedge, cluster randomised controlled trial will be conducted in six inpatient wards over 14 months in a metropolitan teaching hospital in Brisbane (Australia). The intervention will consist of supplementary night lighting installed across all patient rooms within study wards. The planned placement of luminaires, configurations and spectral characteristics are based on prior published research and pre-trial testing and modification. We will collect data on rates of falls on study wards (falls per 1000 patient days), the proportion of patients who fall once or more, and average length of stay. We will recruit two patients per ward per month to a concurrent observational sub-study aimed at understanding potential impacts on a range of patient sleep and mobility behaviour. The effect on the environment will be monitored with sensors to detect variation in light levels and night-time room activity. We will also collect data on possible patient-level confounders including demographics, pre-admission sleep quality, reported vision, hearing impairment and functional status. Discussion: This pragmatic pilot trial will assess the feasibility of conducting a main trial to investigate the effects of modified night lighting on inpatient fall rates using several new methods previously untested in the context of environmental modifications and patient safety. Pilot data collected through both parts of the trial will be utilised to inform sample size calculations, trial design and final data collection methods for a subsequent main trial.

‘I really needed help’: What mothers say about their post-birth care in Queensland, Australia

Background Australian mothers consistently rate postnatal care as the poorest aspect of their maternity care, and researchers and policymakers have widely acknowledged the need for improvement in how postnatal care is provided. Aim To identify and analyse mothers’ comments about postnatal care in their free text responses to an open ended question in the Having a Baby in Queensland Survey, 2010, and reflect on their implications for midwifery practice and maternity service policies. Methods The survey assessed mothers’ experiences of maternity care four months after birth. We analysed free-text data from an open-ended question inviting respondents to write ‘anything else you would like to tell us’. Of the final survey sample (N = 7193), 60% (N = 4310) provided comments, 26% (N = 1100) of which pertained to postnatal care. Analysis included the coding and enumeration of issues to identify the most common problems commented on by mothers. Comments were categorised according to whether they related to in-hospital or post-discharge care, and whether they were reported by women birthing in public or private birthing facilities. Results The analysis revealed important differences in maternal experiences according to birthing sector: mothers birthing in public facilities were more likely to raise concerns about the quality and/or duration of their in-hospital stay than those in private facilities. Conversely, mothers who gave birth in private facilities were more likely to raise concerns about inadequate post-discharge care. Regardless of birthing sector, however, a substantial proportion of all mothers spontaneously raised concerns about their experiences of inadequate and/or inconsistent breastfeeding support. Conclusion Women who birth in private facilities were more likely to spontaneously report concerns about their level of post-discharge care than women from public facilities in Queensland, and publically provided community based care is not sufficient to meet women's needs. Inadequate or inconsistent professional breastfeeding support remains a major issue for early parenting women regardless of birthing sector.

The cost-effectiveness of the MobileMums intervention to increase physical activity among mothers with young children: A Markov model informed by a randomised controlled trial

Objectives: To determine the cost-effectiveness of the MobileMums intervention. MobileMums is a 12-week programme which assists mothers with young children to be more physically active, primarily through the use of personalised SMS text-messages. Design: A cost-effectiveness analysis using a Markov model to estimate and compare the costs and consequences of MobileMums and usual care. Setting: This study considers the cost-effectiveness of MobileMums in Queensland, Australia. Participants: A hypothetical cohort of over 36 000 women with a child under 1 year old is considered. These women are expected to be eligible and willing to participate in the intervention in Queensland, Australia. Data sources: The model was informed by the effectiveness results from a 9-month two-arm community-based randomised controlled trial undertaken in 2011 and registered retrospectively with the Australian Clinical Trials Registry (ACTRN12611000481976). Baseline characteristics for the model cohort, treatment effects and resource utilisation were all informed by this trial. Main outcome measures: The incremental cost per quality-adjusted life year (QALY) of MobileMums compared with usual care. Results: The intervention is estimated to lead to an increase of 131 QALYs for an additional cost to the health system of 1.1 million Australian dollars (AUD). The expected incremental cost-effectiveness ratio for MobileMums is 8608 AUD per QALY gained. MobileMums has a 98% probability of being cost-effective at a cost-effectiveness threshold of 64 000 AUD. Varying modelling assumptions has little effect on this result. Conclusions: At a cost-effectiveness threshold of 64 000 AUD, MobileMums would likely be a cost-effective use of healthcare resources in Queensland, Australia. Trial registration number: Australian Clinical Trials Registry; ACTRN12611000481976.