Driving simulator evaluation of the failure of an audio in-vehicle warning for railway level crossings

It is impracticable to upgrade the 18,900 Australian passive crossings as such crossings are often located in remote areas, where power is lacking and with low road and rail traffic. The rail industry is interested in developing innovative in-vehicle technology interventions to warn motorists of approaching trains directly in their vehicles. The objective of this study was therefore to evaluate the benefits of the introduction of such technology. We evaluated the changes in driver performance once the technology is enabled and functioning correctly, as well as the effects of an unsafe failure of the technology? We conducted a driving simulator study where participants (N=15) were familiarised with an in-vehicle audio warning for an extended period. After being familiarised with the system, the technology started failing, and we tested the reaction of drivers with a train approaching. This study has shown that with the traditional passive crossings with RX2 signage, the majority of drivers complied (70%) and looked for trains on both sides of the rail track. With the introduction of the in-vehicle audio message, drivers did not approach crossings faster, did not reduce their safety margins and did not reduce their gaze towards the rail tracks. However participants’ compliance at the stop sign decreased by 16.5% with the technology installed in the vehicle. The effect of the failure of the in-vehicle audio warning technology showed that most participants did not experience difficulties in detecting the approaching train even though they did not receive any warning message. This showed that participants were still actively looking for trains with the system in their vehicle. However, two participants did not stop and one decided to beat the train when they did not receive the audio message, suggesting potential human factors issues to be considered with such technology.

Chirp-spread-spectrum-based real time location system for construction safety management: A case study

Observing the working procedure of construction workers is an effective means of maintaining the safety performance of a construction project. It is also difficult to achieve due to a high worker-to-safety-officer ratio. There is an imminent need for the development of a tool to assist in the real-time monitoring of workers, in order to reduce the number of construction accidents. The development and application of a real time locating system (RTLS) based on the Chirp Spread Spectrum (CSS) technique is described in this paper for tracking the real-time position of workers on construction sites. Experiments and tests were carried out both on- and off-site to verify the accuracy of static and dynamic targets by the system, indicating an average error of within one metre. Experiments were also carried out to verify the ability of the system to identify workers’ unsafe behaviours. Wireless data transfer was used to simplify the deployment of the system. The system was deployed in a public residential construction project and proved to be quick and simple to use. The cost of the developed system is also reported to be reasonable (around 1800USD) in this study and is much cheaper than the cost of other RTLS. In addition, the CCS technique is shown to provide an economical solution with reasonable accuracy compared with other positioning systems, such as ultra wideband. The study verifies the potential of the CCS technique to provide an effective and economical aid in the improvement of safety management in the construction industry.

Toward the multilevel older person's transportation and road safety model: A new perspective on the role of demographic, functional, and psychosocial factors

Objectives Self-regulation refers to the practice of using self-imposed restrictions to protect oneself from situations that are, or are perceived to be, unsafe. Within the driving context, self-regulation refers the compensatory practices that some older adults adopt to restrict their driving to situations in which they feel safe. However, the way in which demographic, functional, and psychosocial factors, and the interactions between these factors, influence older adults’ driving self-regulation is not well understood. Improving this understanding could lead to new ways of considering the mobility concerns faced by older drivers. Method A systematic review of the current literature was conducted to explore this issue. Twenty-nine empirical studies investigating the factors associated with older adults’ self-regulatory driving behaviors were examined. Results The review findings were used to construct the Multilevel Older Persons Transportation and Road Safety (MOTRS) model. The MOTRS model proposes that individual and environmental factors such as age, gender, and the availability of alternative transportation predict older adults’ practice of driving-related self-regulation. However, these variables influence self-regulation through psychosocial variables such as driving confidence, affective attitude, and instrumental attitude toward driving. Discussions The MOTRS model extends previous attempts to model older adults’ driving by focusing on a novel target, driving self-regulation, and by including a wider range of predictors identified on the basis of the systematic literature review. This focus enables consideration of broader mobility issues and may inform new strategies to support the mobility of older adults.

Proactive behavior-based safety management for construction safety improvement

Construction is one of the most hazardous industries due to its dynamic, temporary, and decentralized nature. The Hong Kong Commissioner for Labor identifies worker behavior as the root cause of construction accidents. Behavior-based safety (BBS) is one effective approach in managing employee safety issues. However, there is little research on the application of BBS in the construction industry. This research proposes an extension of the BBS approach, proactive behavior-based safety (PBBS), to improve construction safety. PBBS integrates the theory of BBS with the technology of Proactive Construction Management System (PCMS). The innovations of PBBS are: (1) automatically monitoring location-based behaviors; (2)quantitatively measuring safety performance; (3) investigating potential causes of unsafe behaviors; and (4) improving the efficiency of safety management. A pilot study of a Hong Kong construction site practicing PBBS was conducted. The experiment results showed that PBBS performed well on construction accident prevention and the Safety Index (SI) of the two project teams, with increased improvements by 36.07% and 44.70% respectively. It is concluded that PBBS is effective and adaptable to construction industry.

Disability due to road traffic crashes and the management of road safety in developing countries

Injury as a result of road traffic crashes is one of the most significant public health problems in developing countries. It intersects with disability as a development issue because a substantial proportion of people injured in road traffic crashes experience disability, both short term and long term. While there have been significant steps towards better management of road safety globally, especially in developing countries, the implications for road safety policy and practice of disability due road traffic crashes is not fully appreciated. In particular, qualitative information on the lived experience people with a long term disability as a result of a road traffic crash can inform better road safety policy and practice, as demonstrated in a case study from Thailand. The benefits of better policies and practices are likely to accrue to a wide range of road users, and to contribute to the achievement of sustainable development.

Self-reported circumstances and consequences of driving while sleepy

Driver surveys are indispensable sources of information when estimating the role of sleepiness in crash causation. The purpose of the study was to (1) identify the prevalence of driving while sleepy among Finnish drivers, (2) determine the circumstances of such instances, and (3) identify risk factors and risk groups. Survey data were collected from a representative sample of active Finnish drivers (N = 1121). One-fifth of the drivers (19.5%) reported having fallen asleep at the wheel during their driving career, with 15.9% reporting having been close to falling asleep or having difficulty staying awake when driving during the previous twelve months. Epworth Sleepiness Scale scores were found to be associated with both types of sleepiness-related driving instances, while sleep quality was associated only with the latter. Compared to women, men more often reported falling asleep at the wheel; the differences were somewhat smaller with respect to fighting sleep while driving during the previous twelve months. The reported discrepancy in sleepiness-related instances (high prevalence of fighting sleep while driving during the previous twelve months and lower proportion of actually falling asleep) identifies young men (⩽25 years) as one of the main target groups for safety campaigns. Approximately three-quarters of drivers who had fallen asleep while driving reported taking action against falling asleep before it actually happened. Furthermore, almost all drivers who had fallen asleep while driving offered at least one logical reason that could have contributed to their falling asleep. These data indicate some degree of awareness about driving while sleepy and of the potential pre-trip factors that could lead to sleepiness while driving, and supports the notion that falling asleep at the wheel does not come as a (complete) surprise to the driver.

Guidelines for syringe driver management in palliative care

These guidelines are intended to provide clinicians and palliative care services with guidelines to inform practice, the development of policy and procedures, and associated training and education programs in relation to portable subcutaneous infusion device (syringe driver) management.

Developing guidelines for syringe driver management

The aim of this project was to develop clinical practice guidelines for the use and administration of pharmacological agents for symptom control via syringe drivers within Australia. By developing evidence-based clinical practice guidelines for the use of this common device, this project aimed to improve patient outcomes, reduce practice variation, minimize errors and encourage more efficient use of resources. A literature review identified current literature regarding syringe driver management and an expert panel was assembled to assist in the development of the guidelines. The development of these practice guidelines provides an example of how palliative care practitioners can use a framework of contemporary evidence to enhance clinical practice.

Perceived safety, quality and cultural competency of maternity care for culturally and linguistically diverse women in Queensland

Various policies, plans, and initiatives have been implemented to provide safe, quality, and culturally competent care to patients within Queensland’s healthcare system. A series of models of maternity care are available in Queensland that range from standard public care to private midwifery care. The current study aimed to determine whether identifying as Culturally or Linguistically Diverse (CALD) was associated with the perceived safety, quality, and cultural competency of maternity care from a consumer perspective, and to identify specific needs and preferences of CALD maternity care consumers. Secondary analysis of data collected in the Having a Baby in Queensland Survey 2012 was used to compare the experiences of 655 CALD women to those of 4049 non-CALD women in Queensland, Australia, across three stages of maternity care: pregnancy, labour and birth, and after birth. After adjustment for model of maternity care received and socio-demographic characteristics, CALD women were significantly more likely than non-CALD women to experience suboptimal staff technical competence in pregnancy, overall perceived safety in pregnancy and labour/birth, and interpersonal sensitivity in pregnancy and labour/birth. Approximately 50% of CALD women did not have the choice to use a translator or interpreter, or the gender of their care provider, during labour and birth. Thirteen themes of preferences and needs of CALD maternity care consumers based on ethnicity, cultural beliefs, or traditions were identified, however, these were rarely met. Findings imply that CALD women in Queensland experience disadvantageous maternity care with regards to perceived staff technical competence, safety, and interpersonal sensitivity, and receive care that lacks cultural competence. Improved access to support persons, continuity and choice of carer, and staff availability and training is recommended.

Impact of mobile phone use on car-following behaviour of young drivers

Multitasking, such as the concurrent use of a mobile phone and operating a motor vehicle, is a significant distraction that impairs driving performance and is becoming a leading cause of motor vehicle crashes. This study investigates the impact of mobile phone conversations on car-following behaviour. The CARRS-Q Advanced Driving Simulator was used to test a group of young Australian drivers aged 18–26 years on a car-following task in three randomised phone conditions: baseline (no phone conversation), hands-free and handheld. Repeated measure ANOVA was applied to examine the effect of mobile phone distraction on selected car-following variables such as driving speed, spacing, and time headway. Overall, drivers tended to select slower driving speeds, larger vehicle spacings, and longer time headways when they were engaged in either hands-free or handheld phone conversations, suggesting possible risk compensatory behaviour. In addition, phone conversations while driving influenced car-following behaviour such that variability was increased in driving speeds, vehicle spacings, and acceleration and decelerations. To further investigate car-following behaviour of distracted drivers, driver time headways were modelled using Generalized Estimation Equation (GEE). After controlling for various exogenous factors, the model predicts an increase of 0.33 s in time headway when a driver is engaged in hands-free phone conversation and a 0.75 s increase for handheld phone conversation. The findings will improve the collective understanding of distraction on driving performance, in particular car following behaviour which is most critical in the determination of rear-end crashes.

Young and unaffected by road policing strategies: Using deterrence theory to explain provisional drivers' (non)compliance

Newly licenced drivers are disproportionately represented in traffic injuries and crash statistics. Despite the implementation of countermeasures designed to improve safety, such as graduated driver licencing (GDL) schemes, many young drivers do not comply with road rules. This study used a reconceptualised deterrence theory framework to investigate young drivers’ perceptions of the enforcement of road rules in general and those more specifically related to GDL. A total of 236 drivers aged 17–24 completed a questionnaire assessing their perceptions of various deterrence mechanisms (personal and vicarious) and their compliance with both GDL-specific and general road rules. Hierarchical multiple regressions conducted to explore noncompliant behaviour revealed that, contrary to theoretical expectations, neither personal nor vicarious punishment experiences affected compliance in the expected direction. Instead, the most influential factors contributing to noncompliance were licence type (P2) and, counterintuitively, having previously been exposed to enforcement. Parental enforcement was also significant in the prediction of transient rule violations, but not fixed rule violations or overall noncompliance. Findings are discussed in light of several possibilities, including an increase in violations due to more time spent on the road, an ‘emboldening effect’ noted in prior studies and possible conceptual constraints regarding the deterrence variables examined in this study.

Road safety and pavement management: A case study of Tanzania

The implementation of pavement management seems to ignore road safety, with its focus being mainly on infrastructure condition. Safety management as part of pavement management should consider various means of reducing the frequency of vehicle crashes by allocating corrective measures to mitigate accident exposure, as well as reduce accident severity and likelihood. However, it is common that lack of accident records and crash contributing factors impedes incorporating safety into pavement management. This paper presents a case study for the initial development of pavement management systems considering data limitations for 3000 km of Tanzania’s national roads. A performance based optimization utilizes indices for safety and surface condition to allocate corrective measures. A modified Pareto analysis capable of accounting for annual performance and of balancing resources to achieve good surface condition and low levels of safety was applied. Tradeoff analysis for the case study found the need to assign 30% relevance to condition and 70% to road safety. Safety and condition deficiencies were corrected within 5 years with the majority of improvements dedicated to surface treatments and some geometric corrections. Large investments for correcting geometric issues were observed in years two and three if more money was made available.

The psychosocial purpose of driving and its relationship with the risky driving behaviour of young novice drivers

Background The overrepresentation of young drivers in road crashes, injuries and fatalities around the world has resulted in a breadth of injury prevention efforts including education, enforcement, engineering, and exposure control. Despite multifaceted intervention, the young driver problem remains a challenge for injury prevention researchers, practitioners and policy-makers. The intractable nature of young driver crash risks suggests that a deeper understanding of their car use – that is, the purpose of their driving – is required to inform the design of more effective young driver countermeasures. Aims This research examined the driving purpose reported by young drivers, including the relationship with self-reported risky driving behaviours including offences. Methods Young drivers with a Learner or Provisional licence participated in three online surveys (N1 = 656, 17–20 years; N2 = 1051, 17–20 years; N3 = 351, 17–21 years) as part of a larger state-wide project in Queensland, Australia. Results A driving purpose scale was developed (the PsychoSocial Purpose Driving Scale, PSPDS), revealing that young drivers drove for psychosocial reasons such as for a sense of freedom and to feel independent. Drivers who reported the greatest psychosocial purpose for driving were more likely to be male and to report more risky driving behaviours such as speeding. Drivers who deliberately avoided on-road police presence and reported a prior driving-related offence had significantly greater PSPDS scores, and higher reporting of psychosocial driving purposes was found over time as drivers transitioned from the supervised Learner licence phase to the independent Provisional (intermediate) licence phase. Discussion and conclusions The psychosocial needs met by driving suggest that effective intervention to prevent young driver injury requires further consideration of their driving purpose. Enforcement, education, and engineering efforts which consider the psychosocial purpose of the driving are likely to be more efficacious than those which presently do not. Road safety countermeasures could reduce the young driver’s exposure to risk through such mechanisms as encouraging the use of public transport.

Is comfort important for optimal use of child restraints?

Suboptimal restraint use, particularly the incorrect use of restraints, is a significant and widespread problem among child vehicle occupants, and increases the risk of injury. Previous research has identified comfort as a potential factor influencing suboptimal restraint use. Both the real comfort experienced by the child and the parent’s perception of the child’s comfort are reported to influence the optimal use of restraints. Problems with real comfort may lead the child to misuse the restraint in their attempt to achieve better comfort whilst parent-perceived discomfort has been reported as a driver for premature graduation and inappropriate restraint choice. However, this work has largely been qualitative. There has been no research that objectively studies either the association between real and parental perceived comfort, or any association between comfort and suboptimal restraint use. One barrier to such studies is the absence of validated tools for quantifying real comfort in children. We aimed to develop methods to examine both real and parent-perceived comfort and examine their effects on suboptimal restraint use. We conducted online parent surveys (n=470) to explore what drives parental perceptions of their child’s comfort in restraint systems (study 1) and used data from field observation studies (n=497) to examine parent-perceived comfort and its relationship with observed restraint use (study 2). We developed methods to measure comfort in children in a laboratory setting (n=14) using video analysis to estimate a Discomfort Avoidance Behaviour (DAB) score, pressure mapping and adapted survey tools to differentiate between comfortable and induced discomfort conditions (study 3). Preliminary analysis of our recent online survey of Australian parents (study 1) indicates that 23% of parents report comfort as a consideration when making a decision to change restraints. Logistic regression modelling of data collected during the field observation study (study 2) revealed that parent-perceived discomfort was not significantly associated with premature graduation. Contrary to expectation, children of parents who reported that their child was comfortable were almost twice as likely to have been incorrectly restrained (p<0.01, 95% CI 1.24 - 2.77). In the laboratory study (study 3) we found our adapted survey tools did not provide a reliable measurement of real comfort among children. However our DAB score was able to differentiate between comfortable and induced discomfort conditions and correlated well with pressure mapping. Our results suggest that while some parents report concern about their child’s comfort, parent-reported comfort levels were not associated with restraint choice. If comfort is important for optimal restraint use, it is likely to be the real comfort of the child rather than that reported by the parent. The method we have developed for studying real comfort can be used in naturalistic studies involving child occupants to further understand this relationship. This work will be of interest to vehicle and child restraint manufacturers interested in improving restraint design for young occupants as well as researchers and other stakeholders interested in reducing the incidence of restraint misuse among children.