Key drivers of the economic burden of community-associated Methicillin-resistant Staphylococcus aureus in Australia

Estimates of the economic cost of community-associated Methicillin-resistant Staphylococcus aureus(CA-MRSA) in the United States (US) are substantial, ranging from $1.4-13.8 billion. In Australia, it has been shown that rates of CA-MRSA are increasing, and individual studies have looked at the morbidity and mortality associated with CA-MRSA, however, it is not clear what is driving the economic burden of CA-MRSA at a national level. This study presents preliminary findings about the key drivers of the economic cost of CA-MRSA infections in Australia

Assessing the significance of climate and community factors on urban water demand

Ensuring adequate water supply to urban areas is a challenging task due to factors such as rapid urban growth, increasing water demand and climate change. In developing a sustainable water supply system, it is important to identify the dominant water demand factors for any given water supply scheme. This paper applies principal components analysis to identify the factors that dominate residential water demand using the Blue Mountains Water Supply System in Australia as a case study. The results show that the influence of community intervention factors (e.g. use of water efficient appliances and rainwater tanks) on water demand are among the most significant. The result also confirmed that the community intervention programmes and water pricing policy together can play a noticeable role in reducing the overall water demand. On the other hand, the influence of rainfall on water demand is found to be very limited, while temperature shows some degree of correlation with water demand. The results of this study would help water authorities to plan for effective water demand management strategies and to develop a water demand forecasting model with appropriate climatic factors to achieve sustainable water resources management. The methodology developed in this paper can be adapted to other water supply systems to identify the influential factors in water demand modelling and to devise an effective demand management strategy.

The social tasks of learning to become a physical education teacher: Considering the HPE subject department as a community of practice

Initial teacher education (ITE) students participate in various workplaces within schools and in doing so, form understandings about the numerous, and at times competing, expectations of teachers’ work. Through these experiences they form understandings about themselves as health and physical education (HPE) teachers. This paper examines the ways communities of practice within HPE subject department offices function as sites of workplace learning for student teachers. In particular this research focused on how ITE students negotiate tacit and contradictory expectations as well as social tasks during the practicum and the ways in which their understandings are mediated through participation in the workspace. Qualitative methods of survey and semi-structured interview were used to collect data on a cohort of student teachers during and following their major (10 week) practicum experience. Analysis was informed by theories of communities of practice (Wenger, 1998), workplace learning (Billett, 2001), and social task systems (Doyle, 1977). It was evident that considerable effort, attention, and energy was expended on various interrelated social tasks aimed at building positive relationships with their supervisor and other HPE teachers at the school. The social dynamics were highly nuanced and required a game-like approach. In our view the complexity that student teachers must negotiate in striving for an excellent evaluation warrants specific attention in physical education teacher education (PETE) programs. This study raises questions regarding our responsibilities in sending student teachers into contexts that might even be described as toxic. We offer some suggestions for how PETE might better support students going into practicum contexts that might be regarded as problematic workplaces.

iPSL: Enabling rehabilitation of deaf community in Pakistan

This paper presents an initiative taken in Pakistan for the rehabilitation of the deaf community, enabled by the use of technology. iPSL is a system that primarily aims at facilitating communication between the hearing and the deaf community in Pakistan. There is a twofold approach to achieve this. The first dimension is to implement a system that can translate signs made by deaf into natural language sentences. The second dimension is to implement tools that enable hearing people to understand and learn sign language by converting natural language sentences into sign language. This paper presents the progress made in the project so far in terms of design, implementation and evaluation. © ACM 2009.

The impact of Indigenous Community sports programs: The case of surfing

The objective of this research project was to consider the social impact of sport and physical activity on the lives of Indigenous Australians and their communities. There has been strong research interest in the links between sport and recreation programs and various health and social outcomes and a well-established body of literature exists on the use of sport to address social issues in mainstream society (A Thomson, Darcy and Pearce 2010). The consensus is that physical activity is an important contributor to health for all people (Nelson, Abbott and Macdonald 2010). While there is strong research interest, what remains unclear is the value and impact of sport and physical activity on Indigenous communities (Cairnduff 2001). Nelson (2009) drawing on the work of Jonas and Langton (1994) indicates that an ‘Aboriginal person is a descendant of an Indigenous inhabitant of Australia, identifi es as an Aboriginal, and is recognised as Aboriginal by members of the community in which he or she lives’ (p. 97). Even this defi nition has the potential to be politically charged. At a general level, the collective terms ‘Indigenous’ (capitalised) and ‘Aboriginal and Torres Strait Islander’ people (title capitalised) appear to be broadly acceptable terms. Indigenous groups cannot be considered to be homogenous as there is much diversity between and within groups (Nelson et al. 2010; Parker et al. 2006). It is therefore important this report is not viewed as taking an essentialist view of who Indigenous people are and how they develop. Rather, this paper attempts to describe and discuss the experiences of some individuals and their communities in site-specifi c surfi ng programs.

Efficient probabilistic contingency analysis through a stability measure considering wind perturbation

The integration of stochastic wind power has accentuated a challenge for power system stability assessment. Since the power system is a time-variant system under wind generation fluctuations, pure time-domain simulations are difficult to provide real-time stability assessment. As a result, the worst-case scenario is simulated to give a very conservative assessment of system transient stability. In this study, a probabilistic contingency analysis through a stability measure method is proposed to provide a less conservative contingency analysis which covers 5-min wind fluctuations and a successive fault. This probabilistic approach would estimate the transfer limit of a critical line for a given fault with stochastic wind generation and active control devices in a multi-machine system. This approach achieves a lower computation cost and improved accuracy using a new stability measure and polynomial interpolation, and is feasible for online contingency analysis.

Re-imagining public journalism for community radio news-gathering

This paper explores the use of public journalism within a community radio news context. It argues that, the central tenets of the public journalism movement can help to frame, more adequately, a news gathering and production approach Tailored to the needs of community media. . Community radio stations generally enjoy strong relationships with their listeners and play an important role in the formation of the community itself (Lowrey et al., 2008). This paper argues that such strong community ties, in conjunction with public journalism news gathering approaches give community radio stations a strong opportunity to produce relevant, local news sourced driven by their listeners. In this regard ,this paper examines a particular case of public journalism used within the The Wire, a national, daily current affairs program broadcast on community radio. In the case study examined here ,public journalism informed story production that were designed to better meet the needs of community radio stations and their audiences.

Aqueous colloidal stability evaluated by zeta potential measurement and resultant TiO2 for superior photovoltaic performance

Controlling the morphological structure of titanium dioxide (TiO 2) is crucial for obtaining superior power conversion efficiency for dye-sensitized solar cells. Although the sol-gel-based process has been developed for this purpose, there has been limited success in resisting the aggregation of nanostructured TiO2, which could act as an obstacle for mass production. Herein, we report a simple approach to improve the efficiency of dye-sensitized solar cells (DSSC) by controlling the degree of aggregation and particle surface charge through zeta potential analysis. We found that different aqueous colloidal conditions, i.e., potential of hydrogen (pH), water/titanium alkoxide (titanium isopropoxide) ratio, and surface charge, obviously led to different particle sizes in the range of 10-500 nm. We have also shown that particles prepared under acidic conditions are more effective for DSSC application regarding the modification of surface charges to improve dye loading and electron injection rate properties. Power conversion efficiency of 6.54%, open-circuit voltage of 0.73 V, short-circuit current density of 15.32 mA/cm2, and fill factor of 0.73 were obtained using anatase TiO 2 optimized to 10-20 nm in size, as well as by the use of a compact TiO2 blocking layer.

Sinteractivity, proton conductivity and chemical stability of BaZr 0.7In0.3O3-δ for solid oxide fuel cells (SOFCs)

In3+ was used as dopant for BaZrO3 proton conductor and 30 at%-doped BaZrO3 samples (BaZr0.7In 0.3O3-δ, BZI) were prepared as electrolyte materials for proton-conducting solid oxide fuel cells (SOFCs). The BZI material showed a much improved sinteractivity compared with the conventional Y-doped BaZrO 3. The BZI pellets reached almost full density after sintering at 1600 °C for 10 h, whereas the Y-doped BaZrO3 samples still remained porous under the same sintering conditions. The conductivity measurements indicated that BZI pellets showed smaller bulk but improved grain boundary proton conductivity, when compared with Y-doped BaZrO3 samples. A total proton conductivity of 1.7 × 10-3 S cm -1 was obtained for the BZI sample at 700 °C in wet 10% H 2 atmosphere. The BZI electrolyte material also showed adequate chemical stability against CO2 and H2O, which is promising for application in fuel cells.

The impact of the public library as a creative place in the community: A contextual review

This review examines recent literature on the public library as a creative place and the ways in which socio-cultural impact is being measured in assessments of cultural value. Inputs such as funding and staffing are frequently measured against outputs such as visitor numbers and lending frequencies, but qualitative measures (outcomes and impacts) are minimal in the literature because of the lack of persuasive evaluative frameworks and the difficulty of designing and facilitating the evaluations at local and national levels. Nevertheless, when combined with data about outputs and outcomes, the impact on individuals and their communities can be measured effectively and reported persuasively (Poll 2012, p.124). This contextual review provides an overview of current thinking about public libraries and creative spaces with particular attention paid to the rise of so-called makerspaces and Fab Labs. This includes discussion on the types of creative activities that are occurring in the public library context, and an outline of the rhetoric and reality of the public library as a community space. These outlines are reconsidered in a discussion of the evaluative frameworks that have been employed by libraries in the past, followed by an account of some prominent creative spaces that have been formally evaluated. The existence of creative spaces in public libraries is in a state of constant flux, and the development and redevelopment of evaluative frameworks will ensure that published reports will continue to appear throughout 2015 and beyond. This review provides a brief snapshot of the state of the field as it is in the first quarter of 2015.

Two worlds apart: Indigenous community perspectives and Non-Indigenous teacher perspectives on Australian schools

Our evaluation studies of Indigenous school reform begin from a different starting point: listening to, hearing and engaging with the commentaries, voices, narratives and analyses of Indigenous community as they discuss and recount their experiences and current encounters with Australian state schools. Here we undertake a contrastive documentation of the views of Indigenous community members, Elders, parents, education workers, and young people and, indeed, of the views of their non-Indigenous teachers and school principals. This is a dramatic picture of two distinctive cultural lifeworlds, communities and worldviews in contact, of two very different ‘constructions’ by participants of a shared, mutual experience: everyday interaction in the social field of the Australian school. Taken together, our Indigenous and non-Indigenous participants repeatedly confirmed and corroborated a key theme: that Indigenous peoples continue to be viewed and ‘treated’ through the lens and language of cultural, intellectual and moral ‘deficit’.

Influences on sleep-wake behaviour in older adults and community dementia care: Light exposure and partner impact

This project described sleep-wake behaviour in community-dwelling older adults and in community dementia care. It examined the applicability of a newly presented conceptual model (the Multifactorial Influences on Sleep Health model) to evaluate factors influencing sleep in ageing, with a particular focus on the importance of daytime light exposure and the impact of partners.

Place making for knowledge generation and innovation: Planning and branding Brisbane’s knowledge community precincts

Knowledge generation and innovation have been a priority for global city administrators particularly during the last couple of decades. This is mainly due to the growing consensus in identifying knowledge-based urban development as a panacea to the burgeoning economic problems. Place making has become a critical element for success in knowledge-based urban development as planning and branding places is claimed to be an effective marketing tool for attracting investment and talent. This paper aims to investigate the role of planning and branding in place making by assessing the effectiveness of planning and branding strategies in the development of knowledge and innovation milieus. The methodology of the study comprises reviewing the literature thoroughly, developing an analysis framework, and utilizing this framework in analyzing Brisbane’s knowledge community precincts—namely Boggo Road Knowledge Precinct, Kelvin Grove Urban Knowledge Village, and Sippy Downs Knowledge Town. The analysis findings generate invaluable insights in Brisbane’s journey in place making for knowledge and innovation milieus and communities. The results suggest as much as good planning, branding strategies and practice, the requirements of external and internal conditions also need to be met for successful place making in knowledge community precincts.

Blurring the physical boundaries of the city: Media architecture and urban informatics for community engagement

Architecture focuses on designing built environments in response to society’s needs, reflecting culture through materials and forms. The physical boundaries of the city have become blurred through the integration of digital media, connecting the physical environment with the digital. In the recent past the future was imagined as highly technological; 1982 Ridley Scott’s Blade Runner is set in 2019 and introduces a world where supersized screens inject advertisements in the cluttered urban space. Now, in 2015 screens are central to everyday life, but in a completely different way in respect to what had been imagined. Through ubiquitous computing and social media, information is abundant. Digital technologies have changed the way people relate to cities supporting discussion on multiple levels, allowing citizens to be more vocal than ever before. We question how architects can use the affordances of urban informatics to obtain and navigate useful social information to inform design. This chapter investigates different approaches to engage communities in the debate on cities, in particular it aims to capture citizens’ opinions on the use and design of public places. Physical and digital discussions have been initiated to capture citizens’ opinions on the use and design of public places. In addition to traditional consultation methods, Web 2.0 platforms, urban screens, and mobile apps are used in the context of Brisbane, Australia to explore contemporary strategies of engagement (Gray 2014).