68 resultados para split-plot designs
Resumo:
The purpose of a phase I trial in cancer is to determine the level (dose) of the treatment under study that has an acceptable level of adverse effects. Although substantial progress has recently been made in this area using parametric approaches, the method that is widely used is based on treating small cohorts of patients at escalating doses until the frequency of toxicities seen at a dose exceeds a predefined tolerable toxicity rate. This method is popular because of its simplicity and freedom from parametric assumptions. In this payer, we consider cases in which it is undesirable to assume a parametric dose-toxicity relationship. We propose a simple model-free approach by modifying the method that is in common use. The approach assumes toxicity is nondecreasing with dose and fits an isotonic regression to accumulated data. At any point in a trial, the dose given is that with estimated toxicity deemed closest to the maximum tolerable toxicity. Simulations indicate that this approach performs substantially better than the commonly used method and it compares favorably with other phase I designs.
Resumo:
In the fields of organic electronics and biotechnology, applications for organic polymer thin films fabricated using low-temperature non-equilibrium plasma techniques are gaining significant attention because of the physical and chemical stability of thin films and the low cost of production. Polymer thin films were fabricated from non-synthetic terpinen-4-ol using radiofrequency polymerization (13.56 MHz) on low loss dielectric substrates and their permittivity properties were ascertained to determine potential applications for these organic films. Real and imaginary parts of permittivity as a function of frequency were measured using the variable angle spectroscopic ellipsometer. The real part of permittivity (k) was found to be between 2.34 and 2.65 in the wavelength region of 400–1100 nm, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies. Dielectric properties of polyterpenol films were measured by means of split post dielectric resonators (SPDRs) operating at frequencies of 10 GHz and 20 GHz. Permittivity increased for samples deposited at higher RF energy – from 2.65 (25 W) to 2.83 (75 W) measured by a 20-GHz SPDR and from 2.32 (25 W) to 2.53 (100 W) obtained using a 10-GHz SPDR. The error in permittivity measurement was predominantly attributed to the uncertainty in film thickness measurement.
Resumo:
Genotyping in DNA pools reduces the cost and the time required to complete large genotyping projects. The aim of the present study was to evaluate pooling as part of a strategy for fine mapping in regions of significant linkage. Thirty-nine single nucleotide polymorphisms (SNPs) were analyzed in two genomic DNA pools of 384 individuals each and results compared with data after typing all individuals used in the pools. There were no significant differences using data from either 2 or 8 heterozygous individuals to correct frequency estimates for unequal allelic amplification. After correction, the mean difference between estimates from the genomic pool and individual allele frequencies was .033. A major limitation of the use of DNA pools is the time and effort required to carefully adjust the concentration of each individual DNA sample before mixing aliquots. Pools were also constructed by combining DNA after Multiple Displacement Amplification (MDA). The MDA pools gave similar results to pools constructed after careful DNA quantitation (mean difference from individual genotyping .040) and MDA provides a rapid method to generate pools suitable for some applications. Pools provide a rapid and cost-effective screen to eliminate SNPs that are not polymorphic in a test population and can detect minor allele frequencies as low as 1% in the pooled samples. With current levels of accuracy, pooling is best suited to an initial screen in the SNP validation process that can provide high-throughput comparisons between cases and controls to prioritize SNPs for subsequent individual genotyping.
Resumo:
Influential creative industries and creative place thinkers Richard Florida and Charles Landry agree that creativity is necessary for a prospering liveable and, therefore, sustainable city. Following Florida’s work, the ‘creative class’ has become central to what has turned out to be city-centre-centric growth policies. However, until the Queensland University of Technology’s Australian Research Council sponsored research into “creative suburbia”, few researchers had demonstrated – let alone challenged – the notion that a substantial cohort of creative industries workers might prefer to live and work at home in the suburbs rather than in city centres. The “creative suburb” work builds on the creative suburbia research. In a practice-led and property development industry embedded inquiry, the creative suburb draws on significant primary research with suburban, home-based, creative industries workers, vernacular architecture, and town planning in the Toowoomba region, in the state of Queensland, Australia, as inspiration for a series of new building and urban designs available for innovators operating in new suburban greenfield situations and suburban areas undergoing a refit in Queensland and possibly further afield. This paper focuses on one building design informed by this inquiry, with the intention of its construction as a ’showcasestudy’ ‘homeworkhouse’, suitable for creative industries workers in the Toowoomba region.
Resumo:
Indoor air quality is a critical factor in the classroom due to high people concentration in a unique space. Indoor air pollutant might increase the chance of both long and short-term health problems among students and staff, reduce the productivity of teachers and degrade the student’s learning environment and comfort. Adequate air distribution strategies may reduce risk of infection in classroom. So, the purpose of air distribution systems in a classroom is not only to maximize conditions for thermal comfort, but also to remove indoor contaminants. Natural ventilation has the potential to play a significant role in achieving improvements in IAQ. The present study compares the risk of airborne infection between Natural Ventilation (opening windows and doors) and a Split-System Air Conditioner in a university classroom. The Wells-Riley model was used to predict the risk of indoor airborne transmission of infectious diseases such as influenza, measles and tuberculosis. For each case, the air exchange rate was measured using a CO2 tracer gas technique. It was found that opening windows and doors provided an air exchange rate of 2.3 air changes/hour (ACH), while with the Split System it was 0.6 ACH. The risk of airborne infection ranged between 4.24 to 30.86 % when using the Natural Ventilation and between 8.99 to 43.19% when using the Split System. The difference of airborne infection risk between the Split System and the Natural Ventilation ranged from 47 to 56%. Opening windows and doors maximize Natural Ventilation so that the risk of airborne contagion is much lower than with Split System.
Resumo:
Purpose The purpose of this study is to identify and understand the emotions behind a passenger’s airport experience and how this can inform digital channel engagements. Design/methodology/approach This study investigates the emotional experience of two hundred (200) passengers’ journeys at an Australian domestic airport. A survey was conducted which implemented the use of Emocards and an interview approach of laddering. The responses were then analysed into attributes, consequences and values. Findings The results indicate that across key stages of the airport (parking, retail, gates and arrivals) passengers had different emotional experiences (positive, negative and neutral). The attributes, consequences and values behind these emotions were then used to propose digital channel content and purpose of various future digital channel engagements. Research limitations/implications By gaining emotional insights airports are able to generate digital channel engagements, which align with passengers’ needs and values rather than internal operational motivations. Theoretical contributions include the development of the Technology Acceptance Model to include emotional drivers as influences in the use of digital channels. Originality/value This research provides a unique method to understand the passengers’ emotional journey across the airport infrastructure and suggest how to better design digital channel engagements to address passenger latent needs.
Resumo:
A promotional brochure celebrating the completion of the Seagram Building in spring 1957 features on its cover intense portraits of seven men bisected by a single line of bold text that asks, “Who are these Men?” The answer appears on the next page: “They Dreamed of a Tower of Light” (Figures 1, 2). Each photograph is reproduced with the respective man’s name and project credit: architects, Mies van der Rohe and Philip Johnson; associate architect, Eli Jacques Kahn; electrical contractor, Harry F. Fischbach; lighting consultant, Richard Kelly; and electrical engineer, Clifton E. Smith. To the right, a rendering of the new Seagram Tower anchors the composition, standing luminous against a star-speckled night sky; its glass walls and bronze mullions are transformed into a gossamer skin that reveals the tower’s structural skeleton. Lightolier, the contract lighting manufacturer, produced the brochure to promote its role in the lighting of the Seagram Building, but Lightolier’s promotional copy was not far from the truth.