Factors associated with common mental disorders during the transition to adulthood : do emerging adults and ‘early starters’ differ? Findings from an Australian birth cohort study

Background: Despite increasing diversity in pathways to adulthood, choices available to young people are influenced by environmental, familial and individual factors, namely access to socioeconomic resources, family support and mental and physical health status. Young people from families with higher socioeconomic position (SEP) are more likely to pursue tertiary education and delay entry to adulthood, whereas those from low socioeconomic backgrounds are less likely to attain higher education or training, and more likely to partner and become parents early. The first group are commonly termed ‘emerging adults’ and the latter group ‘early starters’. Mental health disorders during this transition can seriously disrupt psychological, social and academic development as well as employment prospects. Depression, anxiety and most substance use disorders have early onset during adolescence and early adulthood with approximately three quarters of lifetime psychiatric disorders having emerged by 24 years of age. Aims: This thesis aimed to explore the relationships between mental health, sociodemographic factors and family functioning during the transition to adulthood. Four areas were investigated: 1) The key differences between emerging adults and ‘early starters’, were examined and focused on a series of social, economic, and demographic factors as well as DSM-IV diagnoses; 2) Methodological issues associated with the measurement of depression and anxiety in young adults were explored by comparing a quantitative measure of symptoms of anxiety and depression (Achenbach’s YSR and YASR internalising scales) with DSM-IV diagnosed depression and anxiety. 3) The association between family SEP and DSM-IV depression and anxiety was examined in relation to the different pathways to adulthood. 4) Finally, the association between pregnancy loss, abortion and miscarriage, and DSM-IV diagnoses of common psychiatric disorders was assessed in young women who reported early parenting, experiencing a pregnancy loss, or who had never been pregnant. Methods: Data were taken from the Mater University Study of Pregnancy (MUSP), a large birth cohort started in 1981 in Brisbane, Australia. 7223 mothers and their children were assessed five times, at 6 months, 5, 14 and 21 years after birth. Over 3700 young adults, aged 18 to 23 years, were interviewed at the 21-year phase. Respondents completed an extensive series of self-reported questionnaires and a computerised structured psychiatric interview. Three outcomes were assessed at the 21-year phase. Mental health disorders diagnosed by a computerised structured psychiatric interview (CIDI-Auto), the prevalence of DSM-IV depression, anxiety and substance use disorders within the previous 12-month, during the transition (between ages of 18 and 23 years) or lifetime were examined. The primary outcome “current stage in the transition to adulthood” was developed using a measure conceptually constructed from the literature. The measure was based on important demographic markers, and these defined four independent groups: emerging adults (single with no children and living with parents), and three categories of ‘early starter’, singles (with no children or partner, living independently), those with a partner (married or cohabitating but without children) and parents. Early pregnancy loss was assessed using a measure that also defined four independent groups and was based on pregnancy outcomes in the young women This categorised the young women into those who were never pregnant, women who gave birth to a live child, and women who reported some form of pregnancy loss, either an abortion or a spontaneous miscarriage. A series of analyses were undertaken to test the study aims. Potential confounding and mediating factors were prospectively measured between the child’s birth and the 21-year phase. Binomial and multinomial logistic regression was used to estimate the risk of relevant outcomes, and the associations were reported as odds ratios (OR) and 95% confidence intervals (95%CI). Key findings: The thesis makes a number of important contributions to our understanding of the transition to adulthood, particularly in relation to the mental health consequences associated with different pathways. Firstly, findings from the thesis clearly showed that young people who parented or partnered early fared worse across most of the economic and social factors as well as the common mental disorders when compared to emerging adults. That is, young people who became early parents were also more likely to experience recent anxiety (OR=2.0, 95%CI 1.5-2.8) and depression (OR=1.7, 95%CI 1.1-2.7) than were emerging adults after taking into account a range of confounding factors. Singles and those partnering early also had higher rates of lifetime anxiety and depression than emerging adults. Young people who partnered early, but were without children, had decreased odds of recent depression; this may be due to the protective effect of early marriage against depression. It was also found that young people who form families early had an increased risk of cigarette smoking (parents OR=3.7, 95%CI 2.9-4.8) compared to emerging adults, but not heavy alcohol (parents OR=0.4, 95%CI 0.3-0.6) or recent illicit drug use. The high rates of cigarette smoking and tobacco use disorders in ‘early starters’ were explained by common risk factors related to early adversity and lower SEP. Having a child and early marriage may well function as a ‘turning point’ for some young people, it is not clear whether this is due to a conscious decision to disengage from a previous ‘substance using’ lifestyle or simply that they no longer have the time to devote to such activities because of child caring. In relation to the methodological issues associated with assessing common mental disorders in young adults, it was found that although the Achenbach empirical internalising scales successfully predicted both later DSM-IV depression (YSR OR=2.3, 95%CI 1.7-3.1) and concurrently diagnosed depression (YASR OR=6.9, 95%CI 5.0- 9.5) and anxiety (YASR OR=5.1, 95%CI 3.8- 6.7), the scales discriminated poorly between young people with or without DSM-IV diagnosed mood disorder. Sensitivity values (the proportion of true positives) for the internalising scales were surprisingly low. Only a third of young people with current DSM-IV depression (range for each of the scales was between 34% to 42%) were correctly identified as cases by the YASR internalising scales, and only a quarter with current anxiety disorder (range of 23% to 31%) were correctly identified. Also, use of the DSM-oriented scales increased sensitivity only marginally (for depression between 2-8%, and anxiety between 2-6%) above the standard Achenbach scales. This is despite the fact that the DSM-oriented scales were originally developed to overcome the poor prediction of DSM-IV diagnoses by the Achenbach scales. The internalising scales, both standard and DSM-oriented, were much more effective at identifying young people with comorbid depression and anxiety, with OR’s 10.1 to 21.7 depending on the internalising scale used. SEP is an important predictor of both an early transition to adulthood and the experience of anxiety during that time Family income during adolescence was a strong predictor of early parenting and partnering before age 24 but not early independent living. Compared to families in the upper quintile, young people from families with low income were nearly twice as likely to live with a partner and four times more likely to become parents (OR ranged from 2.6 to 4.0). This association remained after adjusting for current employment and education level. Children raised in low income families were 30% more likely to have an anxiety disorder (OR=1.3, 95%CI 0.9-1.9), but not depression, as young adults when compared to children from wealthier families. Emerging adults and ‘early starters’ from low income families did not differ in their likelihood of having a later anxiety disorder. Young women reporting a pregnancy loss had nearly three times the odds of experiencing a lifetime illicit drug disorder (excluding cannabis) [abortion OR=3.6, 95%CI 2.0-6.7 and miscarriage OR=2.6, 95%CI 1.2-5.4]. Abortion was associated with alcohol use disorder (OR=2.1, 95%CI 1.3- 3.5) and 12-month depression (OR=1.9, 95%CI 1.1- 3.1). These finding suggest that the association identified by Fergusson et al between abortion and later psychiatric disorders in young women may be due to pregnancy loss and not to abortion, per se. Conclusion: Findings from this thesis support the view that young people who parent or partner early have a greater burden of depression and anxiety when compared to emerging adults. As well, young women experiencing pregnancy loss, from either abortion or miscarriage, are more likely to experience depression and anxiety than are those who give birth to a live infant or who have never been pregnant. Depression, anxiety and substance use disorders often go unrecognised and untreated in young people; this is especially true in young people from lower SEP. Early identification of these common mental health disorders is important, as depression and anxiety experienced during the transition to adulthood have been found to seriously disrupt an individual’s social, educational and economic prospects in later life.

Electrospinning and crosslinking of low-molecular-weight poly(trimethylene carbonate-co-L-lactide) as an elastomeric scaffold for vascular engineering

The growth of suitable tissue to replace natural blood vessels requires a degradable scaffold material that is processable into porous structures with appropriate mechanical and cell growth properties. This study investigates the fabrication of degradable, crosslinkable prepolymers of l-lactide-co-trimethylene carbonate into porous scaffolds by electrospinning. After crosslinking by γ-radiation, dimensionally stable scaffolds were obtained with up to 56% trimethylene carbonate incorporation. The fibrous mats showed Young’s moduli closely matching human arteries (0.4–0.8 MPa). Repeated cyclic extension yielded negligible change in mechanical properties, demonstrating the potential for use under dynamic physiological conditions. The scaffolds remained elastic and resilient at 30% strain after 84 days of degradation in phosphate buffer, while the modulus and ultimate stress and strain progressively decreased. The electrospun mats are mechanically superior to solid films of the same materials. In vitro, human mesenchymal stem cells adhered to and readily proliferated on the three-dimensional fiber network, demonstrating that these polymers may find use in growing artificial blood vessels in vivo.

A novel T-DNA vector design for selection of transgenic lines with simple transgene integration and stable transgene expression

Plants transformed with Agrobacterium frequently contain T-DNA concatamers with direct-repeat (d/r) or inverted-repeat (i/r) transgene integrations, and these repetitive T-DNA insertions are often associated with transgene silencing. To facilitate the selection of transgenic lines with simple T-DNA insertions, we constructed a binary vector (pSIV) based on the principle of hairpin RNA (hpRNA)-induced gene silencing. The vector is designed so that any transformed cells that contain more than one insertion per locus should generate hpRNA against the selective marker gene, leading to its silencing. These cells should, therefore, be sensitive to the selective agent and less likely to regenerate. Results from Arabidopsis and tobacco transformation showed that pSIV gave considerably fewer transgenic lines with repetitive insertions than did a conventional T-DNA vector (pCON). Furthermore, the transgene was more stably expressed in the pSIV plants than in the pCON plants. Rescue of plant DNA flanking sequences from pSIV plants was significantly more frequent than from pCON plants, suggesting that pSIV is potentially useful for T-DNA tagging. Our results revealed a perfect correlation between the presence of tail-to-tail inverted repeats and transgene silencing, supporting the view that read-through hpRNA transcript derived from i/r T-DNA insertions is a primary inducer of transgene silencing in plants. © CSIRO 2005.

The Impacts of Climate Change on Australia’s Food Production and Export

The global food system is undergoing unprecedented change. With population increases, demands for food globally will continue to rise at the same time that agricultural environments are compromised through urban encroachment, climate change and environmental degradation. Australia has long identified itself as an agricultural exporting nation—but what will its capacity be in feeding an increasing global population as it also comes to terms with extreme climatic events such as the floods, fires and droughts, and reduced water availability, experienced in recent decades? This chapter traces the history of Australian agricultural exports and evaluates its food production and export capacity against scientific predictions of climate change impacts. With the federal government forecasting declines in the production of wheat, beef, dairy and sugar, Australia’s key export commodities may well be compromised. Calls to produce more food using new technologies are likely to generate significant environmental problems. Yet, a radical reconfiguration of Australian agriculture which incorporates alternative approaches, such as agro-ecology, is rarely considered by government and industry.

Entropic bounds for multi-scale and multi-physics coupling in earth sciences

The ability to understand and predict how thermal, hydrological,mechanical and chemical (THMC) processes interact is fundamental to many research initiatives and industrial applications. We present (1) a new Thermal– Hydrological–Mechanical–Chemical (THMC) coupling formulation, based on non-equilibrium thermodynamics; (2) show how THMC feedback is incorporated in the thermodynamic approach; (3) suggest a unifying thermodynamic framework for multi-scaling; and (4) formulate a new rationale for assessing upper and lower bounds of dissipation for THMC processes. The technique is based on deducing time and length scales suitable for separating processes using a macroscopic finite time thermodynamic approach. We show that if the time and length scales are suitably chosen, the calculation of entropic bounds can be used to describe three different types of material and process uncertainties: geometric uncertainties,stemming from the microstructure; process uncertainty, stemming from the correct derivation of the constitutive behavior; and uncertainties in time evolution, stemming from the path dependence of the time integration of the irreversible entropy production. Although the approach is specifically formulated here for THMC coupling we suggest that it has a much broader applicability. In a general sense it consists of finding the entropic bounds of the dissipation defined by the product of thermodynamic force times thermodynamic flux which in material sciences corresponds to generalized stress and generalized strain rates, respectively.

Multiscale coupling and multiphysics approaches in earth sciences : applications

Geoscientists are confronted with the challenge of assessing nonlinear phenomena that result from multiphysics coupling across multiple scales from the quantum level to the scale of the earth and from femtoseconds to the 4.5 Ga of history of our planet. We neglect in this review electromagnetic modelling of the processes in the Earth’s core, and focus on four types of couplings that underpin fundamental instabilities in the Earth. These are thermal (T), hydraulic (H), mechanical (M) and chemical (C) processes which are driven and controlled by the transfer of heat to the Earth’s surface. Instabilities appear as faults, folds, compaction bands, shear/fault zones, plate boundaries and convective patterns. Convective patterns emerge from buoyancy overcoming viscous drag at a critical Rayleigh number. All other processes emerge from non-conservative thermodynamic forces with a critical critical dissipative source term, which can be characterised by the modified Gruntfest number Gr. These dissipative processes reach a quasi-steady state when, at maximum dissipation, THMC diffusion (Fourier, Darcy, Biot, Fick) balance the source term. The emerging steady state dissipative patterns are defined by the respective diffusion length scales. These length scales provide a fundamental thermodynamic yardstick for measuring instabilities in the Earth. The implementation of a fully coupled THMC multiscale theoretical framework into an applied workflow is still in its early stages. This is largely owing to the four fundamentally different lengths of the THMC diffusion yardsticks spanning micro-metre to tens of kilometres compounded by the additional necessity to consider microstructure information in the formulation of enriched continua for THMC feedback simulations (i.e., micro-structure enriched continuum formulation). Another challenge is to consider the important factor time which implies that the geomaterial often is very far away from initial yield and flowing on a time scale that cannot be accessed in the laboratory. This leads to the requirement of adopting a thermodynamic framework in conjunction with flow theories of plasticity. This framework allows, unlike consistency plasticity, the description of both solid mechanical and fluid dynamic instabilities. In the applications we show the similarity of THMC feedback patterns across scales such as brittle and ductile folds and faults. A particular interesting case is discussed in detail, where out of the fluid dynamic solution, ductile compaction bands appear which are akin and can be confused with their brittle siblings. The main difference is that they require the factor time and also a much lower driving forces to emerge. These low stress solutions cannot be obtained on short laboratory time scales and they are therefore much more likely to appear in nature than in the laboratory. We finish with a multiscale description of a seminal structure in the Swiss Alps, the Glarus thrust, which puzzled geologists for more than 100 years. Along the Glarus thrust, a km-scale package of rocks (nappe) has been pushed 40 km over its footwall as a solid rock body. The thrust itself is a m-wide ductile shear zone, while in turn the centre of the thrust shows a mm-cm wide central slip zone experiencing periodic extreme deformation akin to a stick-slip event. The m-wide creeping zone is consistent with the THM feedback length scale of solid mechanics, while the ultralocalised central slip zones is most likely a fluid dynamic instability.

Polysubstance use in cannabis users referred for treatment: drug use profiles, psychiatric comorbidity and cannabis-related beliefs

Background: Population-based surveys demonstrate cannabis users are more likely to use both illicit and licit substances, compared with non-cannabis users. Few studies have examined the substance use profiles of cannabis users referred for treatment. Co-existing mental health symptoms and underlying cannabis-related beliefs associated with these profiles remains unexplored. Methods: Comprehensive drug use and dependence severity (Severity of Dependence Scale-Cannabis) data were collected on a sample of 826 cannabis users referred for treatment. Patients completed the General Health Questionnaire, Cannabis Expectancy Questionnaire, Cannabis Refusal Self-Efficacy Questionnaire, and Positive Symptoms and Manic-Excitement subscales of the Brief Psychiatric Rating Scale. Latent class analysis was performed on last month use of drugs to identify patterns of multiple drug use. Mental health comorbidity and cannabis beliefs were examined by identified drug use pattern. Results: A three-class solution provided the best fit to the data: (1) cannabis and tobacco users (n = 176), (2) cannabis, tobacco, and alcohol users (n = 498), and (3) wide-ranging sub- stance users (n = 132). Wide-ranging substance users (3) reported higher levels of cannabis dependence severity, negative cannabis expectancies, lower opportunistic, and emotional relief self-efficacy, higher levels of depression and anxiety and higher manic-excitement and positive psychotic symptoms. Conclusion: In a sample of cannabis users referred for treatment, wide-ranging substance use was associated with elevated risk on measures of cannabis dependence, co-morbid psychopathology, and dysfunctional cannabis cognitions. These findings have implications for cognitive-behavioral assessment and treatment.

Combined analysis of categorical and numerical descriptors of Australian groundnut accessions using nonlinear principal component analysis

For users of germplasm collections, the purpose of measuring characterization and evaluation descriptors, and subsequently using statistical methodology to summarize the data, is not only to interpret the relationships between the descriptors, but also to characterize the differences and similarities between accessions in relation to their phenotypic variability for each of the measured descriptors. The set of descriptors for the accessions of most germplasm collections consists of both numerical and categorical descriptors. This poses problems for a combined analysis of all descriptors because few statistical techniques deal with mixtures of measurement types. In this article, nonlinear principal component analysis was used to analyze the descriptors of the accessions in the Australian groundnut collection. It was demonstrated that the nonlinear variant of ordinary principal component analysis is an appropriate analytical tool because subspecies and botanical varieties could be identified on the basis of the analysis and characterized in terms of all descriptors. Moreover, outlying accessions could be easily spotted and their characteristics established. The statistical results and their interpretations provide users with a more efficient way to identify accessions of potential relevance for their plant improvement programs and encourage and improve the usefulness and utilization of germplasm collections.

Mathematical modelling and experimental validation of solar assisted heat pump system

Singapore is located at the equator, with abundant supply of solar radiation, relatively high ambient temperature and relative humidity throughout the year. The meteorological conditions of Singapore are favourable for efficient operation of solar energy based systems. Solar assisted heat pump systems are built on the roof-top of National University of Singapore’s Faculty of Engineering. The objectives of this study include the design and performance evaluation of a solar assisted heat-pump system for water desalination, water heating and drying of clothes. Using MATLAB programming language, a 2-dimensional simulation model has been developed to conduct parametric studies on the system. The system shows good prospect to be implemented in both industrial and residential applications and would give new opportunities in replacing conventional energy sources with green renewable energy.

Cytochrome p450 1b1, a new keystone in gene-environment interactions related to human head and neck cancer?

Alcohol consumption and tobacco smoking are major causes of head and neck cancers, and regional differences point to the importance of research into gene-environment interactions. Much interest has been focused on polymorphisms of CYP1A1 and of GSTM1 and GSTT1, but a number of studies have not demonstrated significant effects. This has mostly been ascribed to small sample sizes. In general, the impact of polymorphisms of metabolic enzymes appears inconsistent, with some reports of weak-to-moderate associations, and with others of no elevation of risks. The classical cytochrome P450 isoenzyme considered for metabolic activation of polycyclic aromatic hydrocarbons (PAH) is CYP1A1. A new member of the CYP1 family, CYP1B1, was cloned in 1994, currently representing the only member of the CYP1B subfamily. A number of single nucleotide polymorphisms of the CYP1B1 gene have been reported. The amino acid substitutions Val432Leu (CYP1B1*3) and Asn453Ser (CYP1B1*4), located in the heme binding domain of CYP1B1, appear as likely candidates to be linked with biological effects. CYP1B1 activates a wide range of PAH, aromatic and heterocyclic amines. Very recently, the CYP1B1 codon 432 polymorphism (CYP1B1*3) has been identified as a susceptibility factor in smoking-related head-and-neck squamous cell cancer. The impact of this polymorphic variant of CYP1B1 on cancer risk was also reflected by an association with the frequency of somatic mutations of the p53 gene. Combined genotype analysis of CYP1B1 and the glutathione transferases GSTM1 or GSTT1 has pointed to interactive effects. This provides new molecular evidence that tobacco smoke-specific compounds relevant to head and neck carcinogenesis are metabolically activated through CYP1B1 and is consistent with a major pathogenetic relevance of PAH as ingredients of tobacco smoke.

Home range and habitat selection by a threatened bat in exotic plantation forest

Individuals' home ranges are constrained by resource distribution and density, population size, and energetic requirements. Consequently, home ranges and habitat selection may vary between individuals of different sex and reproductive conditions. Whilst home ranges of bats are well-studied in native habitats, they are often not well understood in modified landscapes, particularly exotic plantation forests. Although Chalinolobus tuberculatus (Vespertilionidae, Chiroptera) are present in plantation forests throughout New Zealand their home ranges have only been studied in native forest and forest-agricultural mosaic and no studies of habitat selection that included males had occurred in any habitat type. Therefore, we investigated C. tuberculatus home range and habitat selection within exotic plantation forest. Home range sizes did not differ between bats of different reproductive states. Bats selected home ranges with higher proportions of relatively old forest than was available. Males selected edges with open unplanted areas within their home ranges, which females avoided. We suggest males use these edges, highly profitable foraging areas with early evening peaks in invertebrate abundance, to maintain relatively low energetic demands. Females require longer periods of invertebrate activity to fulfil their needs so select older stands for foraging, where invertebrate activity is higher. These results highlight additional understanding gained when data are not pooled across sexes. Mitigation for harvest operations could include ensuring that areas suitable for foraging and roosting are located within a radius equal to the home range of this bat species.

A comparative risk assessment of burden of disease and injury attributable to 67 risk factors and risk factor clusters in 21 regions, 1990–2010: A systematic analysis for the Global Burden of Disease Study 2010

BACKGROUND Quantification of the disease burden caused by different risks informs prevention by providing an account of health loss different to that provided by a disease-by-disease analysis. No complete revision of global disease burden caused by risk factors has been done since a comparative risk assessment in 2000, and no previous analysis has assessed changes in burden attributable to risk factors over time. METHODS We estimated deaths and disability-adjusted life years (DALYs; sum of years lived with disability [YLD] and years of life lost [YLL]) attributable to the independent effects of 67 risk factors and clusters of risk factors for 21 regions in 1990 and 2010. We estimated exposure distributions for each year, region, sex, and age group, and relative risks per unit of exposure by systematically reviewing and synthesising published and unpublished data. We used these estimates, together with estimates of cause-specific deaths and DALYs from the Global Burden of Disease Study 2010, to calculate the burden attributable to each risk factor exposure compared with the theoretical-minimum-risk exposure. We incorporated uncertainty in disease burden, relative risks, and exposures into our estimates of attributable burden. FINDINGS In 2010, the three leading risk factors for global disease burden were high blood pressure (7·0% [95% uncertainty interval 6·2-7·7] of global DALYs), tobacco smoking including second-hand smoke (6·3% [5·5-7·0]), and alcohol use (5·5% [5·0-5·9]). In 1990, the leading risks were childhood underweight (7·9% [6·8-9·4]), household air pollution from solid fuels (HAP; 7·0% [5·6-8·3]), and tobacco smoking including second-hand smoke (6·1% [5·4-6·8]). Dietary risk factors and physical inactivity collectively accounted for 10·0% (95% UI 9·2-10·8) of global DALYs in 2010, with the most prominent dietary risks being diets low in fruits and those high in sodium. Several risks that primarily affect childhood communicable diseases, including unimproved water and sanitation and childhood micronutrient deficiencies, fell in rank between 1990 and 2010, with unimproved water and sanitation accounting for 0·9% (0·4-1·6) of global DALYs in 2010. However, in most of sub-Saharan Africa childhood underweight, HAP, and non-exclusive and discontinued breastfeeding were the leading risks in 2010, while HAP was the leading risk in south Asia. The leading risk factor in Eastern Europe, most of Latin America, and southern sub-Saharan Africa in 2010 was alcohol use; in most of Asia, North Africa and Middle East, and central Europe it was high blood pressure. Despite declines, tobacco smoking including second-hand smoke remained the leading risk in high-income north America and western Europe. High body-mass index has increased globally and it is the leading risk in Australasia and southern Latin America, and also ranks high in other high-income regions, North Africa and Middle East, and Oceania. INTERPRETATION Worldwide, the contribution of different risk factors to disease burden has changed substantially, with a shift away from risks for communicable diseases in children towards those for non-communicable diseases in adults. These changes are related to the ageing population, decreased mortality among children younger than 5 years, changes in cause-of-death composition, and changes in risk factor exposures. New evidence has led to changes in the magnitude of key risks including unimproved water and sanitation, vitamin A and zinc deficiencies, and ambient particulate matter pollution. The extent to which the epidemiological shift has occurred and what the leading risks currently are varies greatly across regions. In much of sub-Saharan Africa, the leading risks are still those associated with poverty and those that affect children.

Robust design and optimisation of a radial turbine within a supercritical CO2 solar Brayton Cycle

The generation of solar thermal power is dependent upon the amount of sunlight exposure,as influenced by the day-night cycle and seasonal variations. In this paper, robust optimisation is applied to the design of a power block and turbine, which is generating 30 MWe from a concentrated solar resource of 560oC. The robust approach is important to attain a high average performance (minimum efficiency change) over the expected operating ranges of temperature, speed and mass flow. The final objective function combines the turbine performance and efficiency weighted by the off-design performance. The resulting robust optimisation methodology as presented in the paper gives further information that greatly aids in the design of non-classical power blocks through considering off-design conditions and resultant performance.

New Zealand, plain packaging, and the Trans-Pacific Partnership

The New Zealand Parliament is considering the adoption of plain packaging of tobacco products with the introduction of the Smoke-Free Environments (Tobacco Plain Packaging) Amendment Bill 2014 (NZ). There has been strong support for the measure amongst the major parties – including the National Party; the Maori Party; the Labor Party; and the Greens. The New Zealand parliamentary debate has considered matters of public health and tobacco control; the role of intellectual property law; and the operation of international trade and investment law.

Open and closed-loop recycling of textile and apparel products

Textile waste is a significant contributor to landfill yet the majority of textiles can be recycled, allowing for the energy and fibre to be reclaimed. This chapter examines the open-loop and closed loop recycling of textile products with particular reference to the fashion and apparel context. It describes the fibres used within apparel, the current mechanical and chemical methods for textile recycling, LCA findings for each method, and applications within apparel for each. Barriers for more effective recycling include ease of integration into existing textile and apparel design methods as well as coordinated collection of post-consumer waste. The chapter concludes with a discussion of innovations that point to future trends in both open-loop and closed-loop recycling within the apparel industry.