108 resultados para Swedish listed companies
Resumo:
While a protective long-term effect of parity on endometrial cancer risk is well established, the impact of timing of births is not fully understood. We examined the relationship between endometrial cancer risk and reproductive characteristics in a population-based cohort of 2,674,465 Swedish women, 20–72 years of age. During follow-up from 1973 through 2004, 7,386 endometrial cancers were observed. Compared to uniparous women, nulliparous women had a significantly elevated endometrial cancer risk (hazard ratio [HR] = 1.32, 95% confidence interval [CI], 1.22–1.42). Endometrial cancer risk decreased with increasing parity; compared to uniparous women, women with ≥4 births had a HR=0.66 (95% CI, 0.59–0.74); p-trend < 0.001. Among multiparous women, we observed no relationship of risk with age at first birth after adjustment for other reproductive factors. While we initially observed a decreased risk with later ages at last birth, this appeared to reflect a stronger relationship with time since last birth, with women with shorter times being at lowest risk. In models for multiparous women that included number of births, age at first and last birth, and time since last birth, age at last birth was not associated with endometrial cancer risk, while shorter time since last birth and increased parity were associated with statistically significantly reduced endometrial cancer risks. The HR was 3.95 (95%CI; 2.17–7.20; p-trend=<0.0001) for women with ≥25 years since a last birth compared to women having given birth within 4 years. Our findings support that clearance of initiated cells during delivery may be important in endometrial carcinogenesis. Keywords: endometrial carcinoma, parity, registry, reproductive factors
Resumo:
A key part of the auditor independence reforms in Australia, as represented by Corporate Law Economic Reform Program (Audit Reform and Corporate Disclosure) Act 2004 (Cth) (CLERP 9), mandates audit partner rotation. The change was criticised predominantly due to the costs imposed on both the audit firms and the audit clients. This study examines the Australian experience post-CLERP 9 with mandated auditor rotation. Based on data of audit partner rotation over 2003–2009 (on average 1200 listed Australian companies over the sample period), we show that audit partner tenure sat at a median of 2–3 years, but that the maximum audit partner tenure was as high as 20 years in the pre-CLERP 9 period. For around 85% of the market, audit partner rotation occurred voluntarily at between 1–5 years. The interesting result is that for 15% of the market, the mandated audit partner rotation had a significant impact on corporate governance practice. There is also a greater observed impact of mandatory rotation on audit engagements involving the non-global auditing firms. These findings inform the debate as to the ‘costliness’ of the law reform.
Resumo:
In this issue of the Journal, the articles considered reflect the depth of research and practice that is unique to project management discipline. The range of topics addressed includes managing project contracts (Chan et al., “A Comparative Study of the Benefits of Applying Target Cost Contracts Between South Australia and Hong Kong”), managing project complexity (Chronéer and Bergquist, “Managerial Complexity in Process Industrial R&D Projects: A Swedish Study”), identifying early warning signs in complex projects (Williams et al., “Identifying and Acting on Early Warning Signs in Complex Projects”), project risk management (Krane, Olsson, and Rolstadås, “How Project Manager–Project Owner Interaction Can Work Within and Influence Project Risk Management”), exploring decisions regarding outsourcing and alignment of the project management office (Martins and Martins, “Outsourcing Operations in Project Management Offices: The Reality of Brazilian Companies”), and project management practices at strategic and tactical levels of the organization leading to sustainable development (Herazo, Lizarralde, and Paquin, “Sustainable Development in the Building Sector: A Canadian Case Study on the Alignment of Strategic and Tactical Management”).
Resumo:
This chapter analyses the characterization of Hjalti Skeggjason in the medieval Icelandic text Heimskringla. It argues that Hjalti is developed as an exemplary character who is able to adapt to life at the Norwegian court while exerting his own influence on how that court functions.
Resumo:
National flag carriers are struggling for survival, not only due to classical reasons such as increase in fuel and tax or natural disasters, but largely due to the inability to quickly adapt to its competitive environment – the emergence of budget and Persian Gulf airlines. In this research, we investigate how airlines can transform their business models via technological and strategic capabilities to become profitable and sustainable passenger experience companies. To formulate recommendations, we analyze customer sentiments via social media to understand what people are saying about the airlines.
Resumo:
In Australia, few fashion brands have intervened in the design of their products or the systems around their product to tackle environmental pollution and waste. Instead, support of charities (whether social or environmental) has become conflated with sustainability in the eyes of the public.However, three established Australian brands recently put forward initiatives which explicitly tackle the pre-consumer or post-consumer waste associated with their products. In 2011, Billabong, one of the largest surfwear companies in the world, developed a collection of board shorts made from recycled bottles that are also recyclable at end of life. The initiative has been promoted in partnership with Bob Marley’s son Rohan Marley, and the graphics of the board shorts reference the Rastafarian colours and make use of Marley’s song lyrics. In this way, the company has tapped into an aspect of surf culture linked to environmental activism, in which the natural world is venerated. Two mid-market initiatives, by Metalicus and Country Road, each have a social outcome that arguably aligns to the values of their middle-class consumer base. Metalicus is spear-heading a campaign for Australian garment manufacturers to donate their pre consumer waste – fabric off-cuts – to charity Open Family Australia to be manufactured into quilts for the homeless. Country Road has partnered with the Australian Red Cross to implement a recycling scheme in which consumers donate their old Country Road garments in exchange for a Country Road gift voucher. Both strategies, while tackling waste, tell an altruistic story in which the disadvantaged can benefit from the consumption habits of the middle-class. To varying degrees, the initiative chosen by each company feeds into the stories they tell about themselves and about the consumers who purchase their clothing. However, how can we assess the impact of these schemes on waste management in real terms, or indeed the worth of each scheme in the wider context of the fashion system? This paper will assess the claims made by the companies and analyse their efficacy, suggesting that a more nuanced assessment of green claims is required, in which ‘green’ comes in many tonal variations.
Resumo:
Purpose – Integrated supplier management (ISM), new product development (NPD) and knowledge sharing (KS) practices are three primary business activities utilised to enhance manufacturers' business performance (BP). The purpose of this paper is to empirically investigate the relationships between these three business activities (i.e. ISM, NPD, KS) and BP in a Taiwanese electronics manufacturing context. Design/methodology/approach – A questionnaire survey is first administered to a sample of electronic manufacturing companies operating in Taiwan to elicit the opinions of technical and managerial professionals regarding business activities and BP within their companies. A total of 170 respondents from 83 companies respond to the survey. Factor, correlation and path analysis are undertaken on this quantitative data set to derive the key factors which leverage business outcomes in these companies. Following empirical analysis, six semi-structured interviews are undertaken with manufacturing executives to provide qualitative insights into the underlying reasons why certain business activity factors are the strongest predictors of BP. Findings – The investigation shows that the ISM, NPD and KS constructs all play an important role in the success of company operations and creating business outcomes. Specifically, the key factors within these constructs which influenced BP are: supplier evaluation and selection; design simplification and modular design; information technology infrastructure and systems and open communication. Accordingly, sufficient financial and human resources should be allocated to these important activities to derive accelerated rates of improved BP. These findings are supported by the qualitative interviews with manufacturing executives. Originality/value – The paper depicts the pathways to improved manufacturing BP, through targeting efforts into the above-mentioned factors within the ISM, NPD and KS constructs. Based on the empirical path model, and the specific insights derived from the explanatory interviews with manufacturing executives, the paper also provides a number of practical implications for manufacturing companies seeking to enhance their BP through improved operational activities.
Resumo:
This paper investigates the social and environmental disclosure practices of two large multinational companies, specifically Nike and Hennes&Mauritz. Utilising a joint consideration of legitimacy theory and media agenda setting theory, we investigate the linkage between negative media attention, and positive corporate social and environmental disclosures. Our results generally support a view that for those industry‐related social and environmental issues attracting the greatest amount of negative media attention, these corporations react by providing positive social and environmental disclosures. The results were particularly significant in relation to labour practices in developing countries – the issue attracting the greatest amount of negative media attention for the companies in question.
Resumo:
As the Indonesian construction industry is now promising to become the engine of national economic development, achieving quality and higher performance, not only domestically but also in the international market, are becoming crucial issues. Implementing quality management systems (QMSs) based on ISO 9001 are important in helping Indonesian construction companies become more competitive, for it is acknowledged that quality in construction is a major concern in the global construction industry. However, the possession of ISO 9001 certification does not reflect the presence of a well-operated QMS, which is capable of giving customer and project end-users satisfaction. The review of literature found that there is a significant correlation between a company.s organisational culture and the quality performance of contractors. While research into this area has involved many researchers, there is no critical mass of information specifically related to the Indonesian situation. Studies based on contemporary perspectives of the characteristics of the Indonesian construction organisational culture using Cameron and Quinn.s Organizational Culture Assessment Instrument (OCAI) and its relationship with the contractor.s ISO 9001 practices, have not been previously undertaken. This thesis research, therefore, investigated the culture profiles in Indonesian construction organisations, together with the current implementation of ISO 9001 and their performance during implementing QMSs, as information in these areas has a bearing on the poor performance and low levels of competitiveness of Indonesian construction companies. Questionnaire surveys were distributed to selected representative grade 7 civil engineering contractors located in the two provincial capitals of Makassar and Manado, and the national capital, Jakarta, in order to collect responses designed to examine the effectiveness of their QMSs implementation. The survey also aimed to identify current problems within the systems, and examine the performance of companies while implementing their QMSs. The questionnaire contained questions to assess the organisational culture profiles of Indonesian construction companies, adopting the OCAI. The survey results were then used to analyse the influence of different organisational culture profiles on QMSs implementation among respondent companies. The results from the questionnaire survey supported the development of a Culture-based Quality Management System Improvement Implementation Framework, designed to help Indonesian construction companies identify some typical barriers associated with impacting on effective QMSs implementation; to assist them to develop cultural values that can drive effective QMSs implementation; to undertake effective QMSs practices; and to recognise the potential results and longer-term benefits obtainable from implementing effective QMSs. A Focus Group Discussion was conducted with the assistance of a panel of professional construction practitioners, policy makers and academic experts, which further considered and validated the usefulness and applicability of the framework. Based on the outcome from this discussion and on the results of the earlier data analysis, a final version of the framework was developed to assist Indonesian construction companies in improving their capability of construction project delivery, and thereby contribute to providing or improving the competitive advantage of Indonesian construction companies in the local, national and global construction market.
Resumo:
The opening of the Australian economy in a globalised world has led to Australian garment and retail corporations moving their manufacturing overseas and acquiring goods from overseas providers. This is usually better for the corporations’ bottom-line, as they can purchase goods overseas at a fraction of their local cost, partly due to cheap labour. Australia is one of the many OECD countries not to have a well regulated environment for workplace human rights. This study examines 18 major Australian retail and garment manufacturing corporations and finds that workplace human rights reporting is poor, based on content analysis of their annual reports, corporate social responsibility reports and websites. This is probably due to the failure of the Australian Government to provide adequate oversight by promulgating mandatory reporting standards for both local and overseas operations of Australian companies. This permits corporations to avoid reporting their workplace human rights standards and breaches.
Resumo:
Sweden’s protest against the Vietnam War was given tangible form in 1969 through the decision to give economic aid to the Government of North Vietnam. The main outcome was an integrated pulp and paper mill in the Vinh Phu Province north-west of Hanoi. Known as Bai Bang after its location, the mill became the most costly, one of the longest lasting and the most controversial project in the history of Swedish development cooperation. In 1996 Bai Bang produced at its full capacity. Today the mill is exclusively managed and staffed by the Vietnamese and there are plans for future expansion. At the same time a substantial amount of money has been spent to reach these achievements. Looking back at the cumbersome history of the project the results are against many’s expectations. To learn more about the conditions for sustainable development Sida commissioned two studies of the Bai Bang project. Together they touch upon several important issues in development cooperation over a period of almost 30 years: the change of aid paradigms over time, the role of foreign policy in development cooperation, cultural obstacles, recipient responsibility versus donor led development etc. The two studies were commissioned by Sida’s Department for Evaluation and Internal Audit which is an independent department reporting directly to Sida’s Board of Directors. One study assesses the financial and economic viability of the pulp and paper mill and the broader development impact of the project in Vietnam. It has been carried out by the Centre for International Economics, an Australian private economic research agency. The other study analyses the decision-making processes that created and shaped the project over a period of two decades, and reflects on lessons from the project for development cooperation in general. This study has been carried out by the Chr. Michelsen Institute, a Norweigan independent research institution.
Resumo:
This paper presents a series of operating schedules for Battery Energy Storage Companies (BESC) to provide peak shaving and spinning reserve services in the electricity markets under increasing wind penetration. As individual market participants, BESC can bid in ancillary services markets in an Independent System Operator (ISO) and contribute towards frequency and voltage support in the grid. Recent development in batteries technologies and availability of the day-ahead spot market prices would make BESC economically feasible. Profit maximization of BESC is achieved by determining the optimum capacity of Energy Storage Systems (ESS) required for meeting spinning reserve requirements as well as peak shaving. Historic spot market prices and frequency deviations from Australia Energy Market Operator (AEMO) are used for numerical simulations and the economic benefits of BESC is considered reflecting various aspects in Australia’s National Electricity Markets (NEM).
Resumo:
The experiences of the loss reduction projects in electric power distribution companies (EPDCs) of Iran are presented. The loss reduction methods, which are proposed individually by 14 EPDCs, corresponding energy saving (ES), Investment costs (IC), and loss rate reductions are provided. In order to illustrate the effectiveness and performance of the loss reduction methods, three parameters are proposed as energy saving per investment costs (ESIC), energy saving per quantity (ESPQ), and investment costs per quantity (ICPQ). The overall ESIC of 14 EPDC as well as individual average and standard deviation of the EISC for each method is presented and compared. In addition, the average and standard deviation of the ESPQs and ICPQs for the loss reduction methods, individually, are provided and investigated. These parameters are useful for EPDCs that intend to reduce the electric losses in distribution networks as a benchmark and as a background in the planning purposes.
Resumo:
"in a world which is experiencing unprecedented deforestation and widespread global environmental threats there is something intuitively right about planting a tree" (Future Forests (Fiji) Limited) The above quote demonstrates that even in the wake of global environmental crisis that hope still remains and that humans can still control their destiny. This opportunity to effect positive environmental change is one of the main aims of the South Pacific Stock Exchange’s (SPSE) most recent publicly listed company: Future Forest (Fiji) Limited. Incorporated in 2004 and listed on SPSE in 2011, the company is Fiji’s first large-scale commercial hardwood forest plantation and nursery. Future Forest (FF) is the only company listed on the SPSE with biological assets or “living assets.” The accounting standard for biological assets is IAS 41: Agriculture. This standard prescribes the use of fair value as the basis of valuation. While a more relevant method of valuation, the application of fair value accounting can be more costly and burdensome for companies in developing economies (White 2008). In line with the journal’s theme of agriculture, this article explores the issues, challenges and potential benefits involved in applying fair value accounting for biological assets in a developing economy such as Fiji using the case of Future Forest (Fiji) Limited.