Stress and addiction : contribution of the corticotropin releasing factor (CRF) system in neuroplasticity

Corticotropin releasing factor (CRF) has been shown to induce various behavioral changes related to adaptation to stress. Dysregulation of the CRF system at any point can lead to a variety of psychiatric disorders, including substance use disorders (SUDs). CRF has been associated with stress-induced drug reinforcement. Extensive literature has identified CRF to play an important role in the molecular mechanisms that lead to an increase in susceptibility that precipitates relapse to SUDs. The CRF system has a heterogeneous role in SUDs. It enhances the acute effects of drugs of abuse and is also responsible for the potentiation of drug-induced neuroplasticity evoked during the withdrawal period. We present in this review the brain regions and circuitries where CRF is expressed and may participate in stress-induced drug abuse. Finally, we attempt to evaluate the role of modulating the CRF system as a possible therapeutic strategy for treating the dysregulation of emotional behaviors that result from the acute positive reinforcement of substances of abuse as well as the negative reinforcement produced by withdrawal.

Identification of bone morphogenetic proteins 2 and 4 in commercial demineralized freeze-dried bone allograft preparations : pilot study

BACKGROUND: Demineralized freeze-dried bone allografts (DFDBAs) have been proposed as a useful adjunct in periodontal therapy to induce periodontal regeneration through the induction of new bone formation. The presence of bone morphogenetic proteins (BMPs) within the demineralized matrix has been proposed as a possible mechanism through which DFDBA may exert its biologic effect. However, in recent years, the predictability of results using DFDBA has been variable and has led to its use being questioned. One reason for the variability in tissue response may be attributed to differences in the processing of DFDBA, which may lead to loss of activity of any bioactive substances within the DFDBA matrix. Therefore, the purpose of this investigation was to determine whether there are detectable levels of bone morphogenetic proteins in commercial DFDBA preparations. METHODS: A single preparation of DFDBA was obtained from three commercial sources. Each preparation was studied in triplicate. Proteins within the DFDBA samples were first extracted with 4M guanidinium HCI for seven days at 40 degrees celsius and the residue was further extracted with 4M guanidinium HCL/EDTA for seven days at 40 degrees celsius. Two anti-human BMP-2 and -4 antibodies were used for the detection of the presence of BMP's in the extracts. RESULTS: Neither BMP-2 nor BMP-4 was detected in any of the extracts. When recombinant human BMP-2 and -4 were added throughout the extraction process of DFDBA extraction, not only were intact proteins detected but smaller molecular weight fragments were also noted in the extract. CONCLUSIONS: These results indicate that all of the DFDBA samples tested had no detectable amounts of BMP-2 and -4. In addition, an unknown substance present in the DFDBA may be responsible for degradation of whatever BMPs might be present.

The effect of alcohol and drug consumption on academic performance : a treatment effect evaluation

It is often argued that consumption of alcohol, tobacco and drugs is detrimental to the cognitive abilities of teenagers. In order to disentangle a possible causal effect of these substances use from a self-selection bias, we control for pupils previous performance and for their previous rate of progression applying a DiDiD strategy. Using the NELS 1988 panel dataset, we find that the effects of alcohol and tobacco on test scores disappear once the selection bias is controlled for (this does not preclude long term detrimental effects). However, we find reliable evidence that heavy use of drugs (marijuana and cocaine) has direct detrimental effects on educational achievements. Hence, our results may have significant policy implications.

Craving : a research update [Editorial to a special issue]

Craving has long been associated with addictive disorders. It has received much attention over the last two decades, partly through the advent of pharmacotherapies that attempt to address it (Jonson, 2008; Yahyavi-Firouz-Abadi & See, 2009). More recently, craving for substances has attained increased prominence, with the inclusion of “Craving or a strong desire or urge” in the draft of DSM-5 (APA, 2012). Studies generally support craving as occurring on a single diagnostic dimension alongside existing dependence criteria (Hasin, et al., 2012; Keyes, et al., 2011). Some (e.g. Keyes, et al., 2011) demonstrate that the addition of craving to DSM-IV alcohol abuse and alcohol dependence criteria contributes novel variance in predicting severity, and improves discrimination above that offered by existing DSM-IV criteria. Within the current volume, the paper by Agrawal et al. confirms that craving strongly loads on a single dimension that also incorporates DSM-IV alcohol dependence criteria. Craving was a relatively severe symptom: It was least often endorsed, and did not exceed 50% endorsement until 6 of the remaining 7 criteria were present...

SERS substrate for detection of explosives

A novel gold coated femtosecond laser nanostructured sapphire surface – an “optical nose” - based on surface-enhanced Raman spectroscopy (SERS) for detecting vapours of explosive substances was investigated. Four different nitroaromatic vapours at room temperature were tested. Sensor responses were unambiguous and showed response in the range of 0.05 – 15 uM at 25 °C. The laser fabricated substrate nanostructures produced up to an eight-fold increase in Raman signal over that observed on the unstructured portions of the substrate. This work demonstrates a simple sensing system that is compatible with commercial manufacturing practices to detect taggants in explosives which can undertake as part of an integrated security or investigative mission.

Infrared and Raman spectroscopic characterization of the phosphate mineral kosnarite KZr2(PO4)3 in comparison with other pegmatitic phosphates

In this research, we have used vibrational spectroscopy to study the phosphate mineral kosnarite KZr2(PO4)3. Interest in this mineral rests with the ability of zirconium phosphates (ZP) to lock in radioactive elements. ZP have the capacity to concentrate and immobilize the actinide fraction of radioactive phases in homogeneous zirconium phosphate phases. The Raman spectrum of kosnarite is characterized by a very intense band at 1,026 cm−1 assigned to the symmetric stretching vibration of the PO4 3− ν1 symmetric stretching vibration. The series of bands at 561, 595 and 638 cm−1 are assigned to the ν4 out-of-plane bending modes of the PO4 3− units. The intense band at 437 cm−1 with other bands of lower wavenumber at 387, 405 and 421 cm−1 is assigned to the ν2 in-plane bending modes of the PO4 3− units. The number of bands in the antisymmetric stretching region supports the concept that the symmetry of the phosphate anion in the kosnarite structure is preserved. The width of the infrared spectral profile and its complexity in contrast to the well-resolved Raman spectrum show that the pegmatitic phosphates are better studied with Raman spectroscopy.

Nature and genesis of clay minerals of the Rustler Formation in the vicinity of the Waste Isolation Pilot Plant in Souteastern New Mexico

Detailed mineralogical studies of the matrix and fracture-fill materials of a large number of samples from the Rustler Formation have been carried out using x-ray diffraction, high-resolution transmission electron microscopy, electron microprobe analysis, x-ray fluorescence, and atomic absorption spectrophotometry. These analyses indicate the presence of four clay minerals: interstratified chlorite/saponite, illite, chlorite, and serpentine. Corrensite (regularly stratified chlorite/saponite) is the dominant clay mineral in samples from the Culebra dolomite and two shale layers of the lower unnamed member of the Rustler Formation. Within other layers of the Rustler Formation, disordered mixed chlorite/saponite is usually the most abundant clay mineral. Studies of the morphology and composition of clay crystallites suggest that the corrensite was formed by the alteration of detrital dioctahedral smectite in magnesium-rich pore fluids during early diagenesis of the Rustler Formation. This study provides initial estimates of the abundance and nature of the clay minerals in the Culebra dolomite in the vicinity of the Waste Isolation Pilot Plant.

Can a community pharmacy sleep assessment tool aid the identification of patients at risk of sleep disorders in the community : a pilot study

Background: When experiencing sleep problems for the first time, consumers may often approach community pharmacists for advice as they are easily accessible health care professionals in the community. In Australian community pharmacies there are no specific tools available for use by pharmacists to assist with the assessment and handling of consumers with sleep enquiries. Objective: To assess the feasibility of improving the detection of sleep disorders within the community through the pilot of a newly developed Community Pharmacy Sleep Assessment Tool (COP-SAT). Method: The COP-SAT was designed to incorporate elements from a number of existing, standardized, and validated clinical screening measures. The COP-SAT was trialed in four Australian community pharmacies over a 4-week period. Key findings: A total of 241 community pharmacy consumers were assessed using the COP-SAT. A total of 74 (30.7%) were assessed as being at risk of insomnia, 26 (10.7%) were at risk of daytime sleepiness, 19 (7.9%) were at risk of obstructive sleep apnea, and 121 (50.2%) were regular snorers. A total of 116 (48.1%) participants indicated that they consume caffeine before bedtime, of which 55 (47%) had associated symptoms of sleep onset insomnia. Moreover, 85 (35%) consumed alcohol before bedtime, of which 50 (58%) experienced fragmented sleep, 50 (58%) were regular snorers, and nine (10.6%) had apnea symptoms. The COP-SAT was feasible in the community pharmacy setting. The prevalence of sleep disorders in the sampled population was high, but generally consistent with previous studies on the general population. Conclusion: A large proportion of participants reported sleep disorder symptoms, and a link was found between the consumption of alcohol and caffeine substances at bedtime and associated symptoms. While larger studies are needed to assess the clinical properties of the tool, the results of this feasibility study have demonstrated that the COP-SAT may be a practical tool for the identification of patients at risk of developing sleep disorders in the community.

Vibrational spectroscopic study of the mineral penkvilksite Na2TiSi4O11·2H2O – a mineral used for the uptake of radionuclides

We have used vibrational spectroscopy to study the formula and molecular structure of the mineral penkvilksite Na 2TiSi 4O 11·2H 2O. Penkvilksite is a mineral which may be used in the uptake of radioactive elements. Both Raman and infrared spectroscopies identify a band at 3638 cm−1 attributed to an OH-stretching vibration of hydroxyl units. The inference is that OH units are involved in the structure of penkvilksite. The formula may be well written as Na 2TiSi 4O 10(OH)2·H 2O. The mineral is characterised by a very intense Raman band at 1085 cm−1 and a broad infrared band at 1080 cm−1 assigned to SiO-stretching vibrations. Raman bands at 620, 667 and 711 cm−1 are attributed to SiO and TiO chain bonds. Water-stretching vibrations are observed as Raman bands at 3197, 3265, 3425 and 3565 cm−1. Vibrational spectroscopy enables aspects of the molecular structure of the mineral penkvilksite to be ascertained. Penkvilksite is a mineral which can incorporate actinides and lanthanides from radioactive waste.

Modified alumina nanofiber membranes for protein separation

Large-scale purification/separation of bio-substances is a key technology required for rapid production of biological substances in bioengineering. Membrane filtration is a new separation process and has potential to be used for concentration (removal of solvent), desalting (removal of low molecular weight compounds), clarification (removal of particles), and fractionation (protein-protein separation). In this study, we developed an efficient membrane for protein separation based on ceramic nanofibers. Alumina nanofibers were prepared on a porous support and formed large flow passages. The radical changes in membrane structure provided new ceramic membranes with a large porosity (more than 70%) due to the replacement of bulk particles with fine fibers as building components. The pore size had an average of 11 nm and pure water flux was approximately 360 L•h-1•m-2•bar-1. Further surface modification with a self-assembled monolayer of (3-aminopropyl) triethoxysilane enhanced the membrane filtration properties. Characterization with SEM, FTIR, contact angle, and proteins separation tests indicated that the fibril layers uniformly spread on the surface of the porous support. Moreover, the membrane surface was changed from hydrophilic to hydrophobic after silane groups were grafted. It demonstrated that the silane-grafted alumina fiber membrane can reject 100% BSA protein and 92% cellulase protein. It was also able to retain 75% trypsin protein while maintaining a permeation flux of 48 L•h-1•m-2•bar-1.

Angiogenesis and non-small cell lung cancer

Lung cancer is the commonest cause of cancer death in the western world. Recent evidence suggests that angiogenesis is related to poor prognosis in many solid tumours including non-small cell lung cancer. Angiogenesis is controlled by a complex interaction between growth and apoptotic factors, proteases and adhesion molecules. The angiogenic process may prove a target for novel therapies such as matrix metalloproteinase inhibitors, growth factor antisense RNA, growth factor receptor antagonists and naturally occurring antiangiogenic peptides. These agents may be used alone or in combination with traditional chemotherapy, radiotherapy and surgery. (C) 2000 Elsevier Science Ireland Ltd.

Utilising hospital data to inform product safety prioritisation : the application of RAPEX severity rankings in ICD-coded burn data

Background The implementation of the Australian Consumer Law in 2011 highlighted the need for better use of injury data to improve the effectiveness and responsiveness of product safety (PS) initiatives. In the PS system, resources are allocated to different priority issues using risk assessment tools. The rapid exchange of information (RAPEX) tool to prioritise hazards, developed by the European Commission, is currently being adopted in Australia. Injury data is required as a basic input to the RAPEX tool in the risk assessment process. One of the challenges in utilising injury data in the PS system is the complexity of translating detailed clinical coded data into broad categories such as those used in the RAPEX tool. Aims This study aims to translate hospital burns data into a simplified format by mapping the International Statistical Classification of Disease and Related Health Problems (Tenth Revision) Australian Modification (ICD-10-AM) burn codes into RAPEX severity rankings, using these rankings to identify priority areas in childhood product-related burns data. Methods ICD-10-AM burn codes were mapped into four levels of severity using the RAPEX guide table by assigning rankings from 1-4, in order of increasing severity. RAPEX rankings were determined by the thickness and surface area of the burn (BSA) with information extracted from the fourth character of T20-T30 codes for burn thickness, and the fourth and fifth characters of T31 codes for the BSA. Following the mapping process, secondary data analysis of 2008-2010 Queensland Hospital Admitted Patient Data Collection (QHAPDC) paediatric data was conducted to identify priority areas in product-related burns. Results The application of RAPEX rankings in QHAPDC burn data showed approximately 70% of paediatric burns in Queensland hospitals were categorised under RAPEX levels 1 and 2, 25% under RAPEX 3 and 4, with the remaining 5% unclassifiable. In the PS system, prioritisations are made to issues categorised under RAPEX levels 3 and 4. Analysis of external cause codes within these levels showed that flammable materials (for children aged 10-15yo) and hot substances (for children aged <2yo) were the most frequently identified products. Discussion and conclusions The mapping of ICD-10-AM burn codes into RAPEX rankings showed a favourable degree of compatibility between both classification systems, suggesting that ICD-10-AM coded burn data can be simplified to more effectively support PS initiatives. Additionally, the secondary data analysis showed that only 25% of all admitted burn cases in Queensland were severe enough to trigger a PS response.

Utilising hospital data to inform product safety prioritisation : the application of RAPEX severity rankings in ICD-coded Burn Data

Background The implementation of the Australian Consumer Law in 2011 highlighted the need for better use of injury data to improve the effectiveness and responsiveness of product safety (PS) initiatives. In the PS system, resources are allocated to different priority issues using risk assessment tools. The rapid exchange of information (RAPEX) tool to prioritise hazards, developed by the European Commission, is currently being adopted in Australia. Injury data is required as a basic input to the RAPEX tool in the risk assessment process. One of the challenges in utilising injury data in the PS system is the complexity of translating detailed clinical coded data into broad categories such as those used in the RAPEX tool. Aims This study aims to translate hospital burns data into a simplified format by mapping the International Statistical Classification of Disease and Related Health Problems (Tenth Revision) Australian Modification (ICD-10-AM) burn codes into RAPEX severity rankings, using these rankings to identify priority areas in childhood product-related burns data. Methods ICD-10-AM burn codes were mapped into four levels of severity using the RAPEX guide table by assigning rankings from 1-4, in order of increasing severity. RAPEX rankings were determined by the thickness and surface area of the burn (BSA) with information extracted from the fourth character of T20-T30 codes for burn thickness, and the fourth and fifth characters of T31 codes for the BSA. Following the mapping process, secondary data analysis of 2008-2010 Queensland Hospital Admitted Patient Data Collection (QHAPDC) paediatric data was conducted to identify priority areas in product-related burns. Results The application of RAPEX rankings in QHAPDC burn data showed approximately 70% of paediatric burns in Queensland hospitals were categorised under RAPEX levels 1 and 2, 25% under RAPEX 3 and 4, with the remaining 5% unclassifiable. In the PS system, prioritisations are made to issues categorised under RAPEX levels 3 and 4. Analysis of external cause codes within these levels showed that flammable materials (for children aged 10-15yo) and hot substances (for children aged <2yo) were the most frequently identified products. Discussion and conclusions The mapping of ICD-10-AM burn codes into RAPEX rankings showed a favourable degree of compatibility between both classification systems, suggesting that ICD-10-AM coded burn data can be simplified to more effectively support PS initiatives. Additionally, the secondary data analysis showed that only 25% of all admitted burn cases in Queensland were severe enough to trigger a PS response.

Commentary on Nutrition and older Indigenous Australians : service delivery implications in remote communities. A narrative review

Indigenous Australians are the most socially and economically disadvantaged population group in Australia and have the poorest health status. The statistics describe and highlight the degree of sicknesses and disadvantage along with lower life expectancy, elevated mortality rate and increased risk of cardiovascular disease, cancer, diabetes, respiratory disease and kidney disease. While these statistics reflect poor health status and a high level of illness within Indigenous communities, it is known that individual, family and community behaviours play a key role in Indigenous health and wellbeing outcomes. These behavioural issues include use of tobacco, alcohol and other substances along with lack of physical activity and poor nutrition. The paper Nutrition and older Indigenous Australians: Service delivery implications in remote communities. A narrative view explores some of the issues specific to nutrition. Bronwyn Fredericks was invited to provide this commentary by the Editor of the Australasian Journal on Aging.

Angiogenesis as a biomarker and target in cancer chemoprevention

Angiogenesis, the formation of new blood vessels from existing vasculature, is essential to the late stages of carcinogenesis, allowing tumours to grow beyond 1-2 mm in diameter, invade surrounding tissue, and metastasise. However, more than two decades ago, angiogenesis that preceded neoplastic transformation was seen. Indeed, it can be detected in inflammatory and infectious diseases that increase the risk of developing cancer. Recent advances in fluorescence endoscopy and histological assessment suggest that, for certain cancers, the degree of new blood-vessel formation may differ between the early and late stages of carcinogenic progression. The association between angiogenesis and cancer occurrence, and ease of detection of this process in accessible tissues early in carcinogenesis, mean that angiogenesis fulfils the criteria for a biomarker of the effectiveness of chemopreventive intervention. There is also some evidence that biochemical assays of angiogenic growth factors may after similar potential as surrogate biomarkers. Many natural and synthetic chemopreventive agents in development or in clinical use inhibit new vessel formation in vivo. Validation of angiogenesis as a biomarker for the effectiveness of chemoprevention should further the advancement of some chemopreventive agents.