'The comfort lies in all the things you can do': the Australian drive-in: cinema of distraction

Contrary to the claims of some film historians, the drive-in was not a uniquely American invention. Australian drive-in cinemas were, at least in the 1950s and 1960s, distinguishable from their American counterparts by virtue of the profusion of additional amusements (or distractions) they offered alongside film-viewing. This article traces the history of Australian drive-ins as ‘entertainment centres’ and ‘high temples of modernity’. It argues that the drive-in can usefully be understood as a mid-point between the domestic and public spheres, and a powerful symbol of post-WWII Australia, signifying prosperity, gathering consumer confidence and, in metropolitan areas, marking the path of urban development through its concentration in new, outer suburban areas.

Sandwiched carbon nanotube film as strain sensor

Two types of carbon nanotube nanocomposite strain sensors were prepared by mixing carbon nanotubes with epoxy (nanocomposite sensor) and sandwiching a carbon nanotube film between two epoxy layers (sandwich sensor). The conductivity, response and sensitivity to static and dynamic mechanical strains in these sensors were investigated. The nanocomposite sensor with 2-3 wt.% carbon nanotube demonstrated high sensitivity to mechanical strain and environmental temperature, with gauge factors of 5-8. On the other hand, a linear relationship between conductivity and dynamic mechanical strain was observed in the sandwich sensor. The sandwich sensor was also not sensitive to temperature although its strain sensitivity (gauge factor of about 3) was lower as compared with the nanocomposite sensor. Both sensors have excellent response to static and dynamic strains, thereby having great potential for strain sensing applications.

Porous Ca-Si-based nanospheres : a potential intra-canal disinfectant-carrier for infected canal treatment

The aim of this study is to develop a new intra-canal disinfectant-carrier for infected canal treatment. To achieve this purpose, a new porous Ca-Si (CS)-based nanosphere was synthesized and characterized. Results showed that the nanospheres can infiltrate into dentinal tubules and released the ampicillin over one week time in a sustained manner. The release of ampicillin from spheres has significantly antibacterial property. Extensive and well-organized in vitro mineralization and crystallization of apatite were induced on the surface of dentin slices covered by CS nanospheres. All these features indicate that the porous CS nanospheres may be developed into a new intra-canal disinfectant-carrier for infected canal treatment.

Melting, ablation, and vapor phase condensation during atmospheric passage of the Bjurbole Meteorite

A detailed study of the Bjurbole fusion crust using scanning electron microscopy (SEM) and energy dispersive analysis (EDS) shows that filamentary crystals and ablation spheres may form on the meteoroid surface. Filamentary crystals, hollow spheres, and porous regions of the surface point to a period of intense vapor phase activity during atmospheric passage. Filamentary crystals can be divided into three categories on the basis of bulk composition and morphology. Two types of filamentary crystals are vapor phase condensation products formed during atmospheric entry of the meteoroid. The other type forms by the interaction of seawater with the fusion surface. The density and composition of ablation spheres varies with the flight orientation of the meteorite. The size range and composition of iron-nickel spheres on the surface of Bjurbole are similar to spheres collected in the stratosphere. A comparison of stratospheric dust collections with meteorite surfaces may provide further insight into the mechanisms of meteoroid entry into planetary atmospheres.

Blogging the 2009 Queensland State Election

The internet has become important in political communication in Australia. Using Habermas' ideal types, it is argued that political blogs can be viewed as public spheres that might provide scope for the expansion of deliberative democratic discussion. This hypothesis is explored through analysis of the group political blog Pineapple Party Time. It is evident that the bloggers and those who commented on their posts were highly knowledgeable about and interested in politics. Form an examination of these posts and the comments on them, Pineapple Party Time did act as a public sphere to some degree, and did provide for the deliberative discussion essential for a democracy, but it was largely restricted to Crikey readers. For a deliberative public sphere and democratic discussion to function to any extent, the public sphere must be open to all citizens, who need to have the access and knowledge to engage in deliberative discussion.

Underground power cable environment on-line monitoring and analysis

Knowledge of cable parameters has been well established but a better knowledge of the environment in which the cables are buried lags behind. Research in Queensland University of Technology has been aimed at obtaining and analysing actual daily field values of thermal resistivity and diffusivity of the soil around power cables. On-line monitoring systems have been developed and installed with a data logger system and buried spheres that use an improved technique to measure thermal resistivity and diffusivity over a short period. Results based on long term continuous field data are given. A probabilistic approach is developed to establish the correlation between the measured field thermal resistivity values and rainfall data from weather bureau records. This data from field studies can reduce the risk in cable rating decisions and provide a basis for reliable prediction of “hot spot” of an existing cable circuit

Probabilistic cable rating based on cable thermal environment studying

This paper describes a new approach to establish the probabilistic cable rating based on cable thermal environment studies. Knowledge of cable parameters has been well established. However the environment in which the cables are buried is not so well understood. Research in Queensland University of Technology has been aimed at obtaining and analysing actual daily field values of thermal resistivity and diffusivity of the soil around power cables. On-line monitoring systems have been developed and installed with a data logger system and buried spheres that use an improved technique to measure thermal resistivity and diffusivity over a short period. Based on the long-term continuous field data for more than 4 years, a probabilistic approach is developed to establish the correlation between the measured field thermal resistivity values and rainfall data from weather bureau records. Hence, a probabilistic cable rating can be established based on monthly probabilistic distribution of thermal resistivity

From entrepreneur to philanthropist : the “second half of the game”

This paper uses interviews with wealthy Australians to examine the progression from entrepreneurship to philanthropy in an Australian context. Understanding the characteristics, behaviours and motivations of this group of entrepreneurs turned philanthropists strengthens the links identified in international research between the entrepreneurship and philanthropic sectors. Three major themes emerging from the qualitative data are explored: first, the tipping points that move individuals (and their partners/families) between the two spheres of activity; and second, the strong motivations for giving that see entrepreneurs identified internationally as more generous than high net worth individuals whose wealth derives from other sources. The third major theme is the modes of giving that distinguish those with an entrepreneurship background from other philanthropists. The unique characteristics of a smaller sub-set of ultra high net worth donors are also explored, and areas for future study are highlighted.

Accurate stratospheric particle-size distributions from a flat-plate collection surface

The first representative chemical, structural, and morphological analysis of the solid particles from a single collection surface has been performed. This collection surface sampled the stratosphere between 17 and 19km in altitude in the summer of 1981, and therefore before the 1982 eruptions of El Chichón. A particle collection surface was washed free of all particles with rinses of Freon and hexane, and the resulting wash was directed through a series of vertically stacked Nucleopore filters. The size cutoff for the solid particle collection process in the stratosphere is found to be considerably less than 1 μm. The total stratospheric number density of solid particles larger than 1μm in diameter at the collection time is calculated to be about 2.7×10−1 particles per cubic meter, of which approximately 95% are smaller than 5μm in diameter. Previous classification schemes are expanded to explicitly recognize low atomic number material. With the single exception of the calcium-aluminum-silicate (CAS) spheres all solid particle types show a logarithmic increase in number concentration with decreasing diameter. The aluminum-rich particles are unique in showing bimodal size distributions. In addition, spheres constitute only a minor fraction of the aluminum-rich material. About 2/3 of the particles examined were found to be shards of rhyolitic glass. This abundant volcanic material could not be correlated with any eruption plume known to have vented directly to the stratosphere. The micrometeorite number density calculated from this data set is 5×10−2 micrometeorites per cubic meter of air, an order of magnitude greater than the best previous estimate. At the collection altitude, the maximum collision frequency of solid particles >5μm in average diameter is calculated to be 6.91×10−16 collisions per second, which indicates negligible contamination of extraterrestrial particles in the stratosphere by solid anthropogenic particles.

Classification of the Johnson Space Center stratospheric dust collection

A review of 291 catalogued particles on the bases of particle size, shape, bulk chemistry, and texture is used to establish a reliable taxonomy. Extraterrestrial materials occur in three defined categories: spheres, aggregates and fragments. Approximately 76% of aggregates are of probable extraterrestrial origin, whereas spheres contain the smallest amount of extraterrestrial material (approx 43%). -B.M.

Conflict and seduction in the public sphere

In a critical but sympathetic reading of Habermas’s work (1984, 1987a, 1987b, 2003), Luke Goode (2005) recently sought to rework his theory of deliberative democracy in an age of mediated and increasingly digital public spheres. Taking a different approach, Alan McKee (2005) challenged the culture- and class-bound strictures of Habermasian rationalism, instead pursuing a more radically pluralist account of postmodern public spheres. The editors of this special section of Media, Culture & Society invited us to discuss our differing approaches to the public sphere. Goode holds that the institutional bases of contemporary public spheres (political parties, educational institutions or public media) remain of critical importance, albeit in the context of a kaleidoscopic array of unofficial and informal micro-publics, both localized and de-territorialized. In contrast, McKee sustains a ‘hermeneutics of suspicion’ toward the official, hegemonic institutions of the public sphere since they tend to exclude and delegitimize discourses and practices that challenge their polite middle-class norms. McKee’s recent research has focused on sexual cultures, particularly among youth (McKee, 2011). Goode’s recent work has examined new social media spaces, particularly in relation to news and public debate (e.g. Goode, 2009; Goode et al., 2011). Consequently, our discussion turned to a domain which links our interests: after Goode discussed some of his recent research on (in)civility on YouTube as a new media public sphere, McKee challenged him to consider the case of pornographic websites modelled on social media sites.1 He identifies a greater degree of ‘civility’ in these pornographic sibling sites than on YouTube, requiring careful consideration of what constitutes a ‘public sphere’ in contemporary digital culture. Such sites represent an environment that shatters the opposition of public and private interest, affording public engagement on matters of the body, of intimacy, of gender politics, of pleasure and desire – said by many critics to be ruled out of court in Habermasian theory. Such environments also trouble traditional binaries between the cognitive and the affective, and between the performative and the deliberative. In what follows we explore the differences between our approaches in the form of a dialogue. As is often the case, our approaches seemed less at odds after engaging in conversation than may have initially appeared. But important differences of emphasis remain.

Graphene nanocomposites

Graphene, one of the allotropes (diamond, carbon nanotube, and fullerene) of carbon, is a monolayer of honeycomb lattice of carbon atoms discovered in 2004. The Nobel Prize in Physics 2010 was awarded to Andre Geim and Konstantin Novoselov for their ground breaking experiments on the twodimensional graphene [1]. Since its discovery, the research communities have shown a lot of interest in this novel material owing to its unique properties. As shown in Figure 1, the number of publications on graphene has dramatically increased in recent years. It has been confirmed that graphene possesses very peculiar electrical properties such as anomalous quantum hall effect, and high electron mobility at room temperature (250000 cm2/Vs). Graphene is also one of the stiffest (modulus ~1 TPa) and strongest (strength ~100 GPa) materials. In addition, it has exceptional thermal conductivity (5000 Wm-1K-1). Based on these exceptional properties, graphene has found its applications in various fields such as field effect devices, sensors, electrodes, solar cells, energy storage devices and nanocomposites. Only adding 1 volume per cent graphene into polymer (e.g. polystyrene), the nanocomposite has a conductivity of ~0.1 Sm-1 [2], sufficient for many electrical applications. Significant improvement in strength, fracture toughness and fatigue strength has also been achieved in these nanocomposites [3-5]. Therefore, graphene-polymer nanocomposites have demonstrated a great potential to serve as next generation functional or structural materials.

Combustion products of bulk aluminum rods burning in high pressure oxygen

Characterization of the combustion products released during the burning of commonly used engineering metallic materials may aid in material selection and risk assessment for the design of oxygen systems. The characterization of combustion products in regards to size distribution and morphology gives useful information for systems addressing fire detection. Aluminum rods (3.2-mm diameter cylinders) were vertically mounted inside a combustion chamber and ignited in pressurized oxygen by resistively heating an aluminum/palladium igniter wire attached to the bottom of the test sample. This paper describes the experimental work conducted to establish the particle size distribution and morphology of the resultant combustion products collected after the burning was completed and subsequently analyzed. In general, the combustion products consisted of a re-solidified oxidized slag and many small hollow spheres of size ranging from about 500 nm to 1000 µm in diameter, surfaced with quenched dendritic and grain-like structures. The combustion products were characterized using optical and scanning electron microscopy.

Preparation of porous nanofibers from electrospun polyacrylonitrile/calcium carbonate composite nanofibers using porogen leaching technique

Production of nanofibrous polyacrylonitrile/calcium carbonate (PAN/CaCO3) nanocomposite web was carried out through solution electrospinning process. Pore generating nanoparticles were leached from the PAN matrices in hydrochloric acid bath with the purpose of producing an ultimate nanoporous structure. The possible interaction between CaCO3 nanoparticles and PAN functional groups was investigated. Atomic absorption method was used to measure the amount of extracted CaCO3 nanoparticles. Morphological observation showed nanofibers of 270–720 nm in diameter containing nanopores of 50–130 nm. Monitoring the governing parameters statistically, it was found that the amount of extraction (ε) of CaCO3was increased when the web surface area (a) was broadened according to a simple scaling law (ε = 3.18 a0.4). The leaching process was maximized in the presence of 5% v/v of acid in the extraction bath and 5 wt % of CaCO3 in the polymer solution. Collateral effects of the extraction time and temperature showed exponential growth within a favorable extremum at 50°C for 72 h. Concentration of dimethylformamide as the solvent had no significant impact on the extraction level.