Effects of slope inclination on the rain-induced instability of embankment slopes

Rainfall has been identified as one of the main causes for embankment failures in areas where high annual rainfall is experienced. The inclination of the embankment slope is important for its stability during rainfall. In this study, instrumented model embankments were subjected to artificial rainfalls to investigate the effects of the slope inclination on their stability. The results of the study suggested that when the slope inclination is greater than the friction angle of the soil, the failure is initiated by the loss of soil suction and when it is smaller than the friction angle of the soil, the failure is initiated by the positive pore water pressure developed at the toe of the slope. Further, slopes become more susceptible to sudden collapse during rainfall as the slope angle increases.

An in-vitro 3-D cell culture model for studying pathomechanisms in AMD

Purpose To develop a novel 3-D cell culture model with the view to studying the pathomechanisms underlying the development of age-related macular degeneration (AMD). Our central hypothesis is that the silk structural protein fibroin used in conjunction with cultured human cells can be used to mimic the structural relationships between the RPE and choriocapillaris in health and disease. Methods Co-cultures of human RPE cells (ARPE-19 cells grown in Miller’s medium) and microvascular endothelial cells (HMEC-1 cells grown in endothelial culture medium) were established on opposing sides of a synthetic Bruch’s membrane (3 microns thick) constructed from B mori silk fibroin. Cell attachment was facilitated by pre-coating the fibroin membrane with vitronectin (for ARPE-19 cells) and gelatin (for HMEC-1 cells) respectively. The effects of tropoelastin on attachment of ARPE-19 cells was also examined. Barrier function was examined by measurement of trans-epithelial resistance (TER) using a voltohmmeter (EVOM-2). The phagocytic activity of the synthetic RPE was tested using vitronectin-coated microspheres (2 micron diameter FluoSpheres). In some cultures, membrane defects were created by puncturing within a 24 G needle. The architecture of the synthetic tissue before and after wounding was examined by confocal microscopy after staining for ZO-1 and F-actin. Results The RPE layer of the 3D model developed a cobblestoned morphology (validated by staining for ZO-1 and F-actin), displayed barrier function (validated by measurement of TER) and demonstrated cytoplasmic uptake of vitronectin-coated microspheres. Attachment of ARPE-19 cells to fibroin was unaffected by tropoelastin. Microvascular endothelial cells attached well to the gelatin-coated surface of the fibroin membrane and remained physically separated from the overlaying RPE layer. The fibroin membranes were amenable to puncturing without collapse thus providing the opportunity to study transmembrane migration of the endothelial cells. Conclusions Synthetic Bruch’s membranes constructed from silk fibroin, vitronectin and gelatin, support the co-cultivation of RPE cells and microvascular endothelial cells. The resulting RPE layer displays functions similar to that of native RPE and the entire tri-layered structure displays potential to be used as an in vitro model of choroidal neovascularization.

Timing and emplacement dynamics of newly recognised mass flow deposits at ~ 8–12 ka offshore Soufrière Hills volcano, Montserrat : how submarine stratigraphy can complement subaerial eruption histories

This contribution describes two mass movement deposits (total volume ~0.5 km3) identified in seven marine cores located 8 to 15 km offshore southern Montserrat, West Indies. The deposits were emplaced in the last 35 ka and have not previously been recognised in either the subaerial or distal submarine records. Age constraints, provided by radiocarbon dating, show that an explosive volcanic eruption occurred at ca 8–12 ka, emplacing a primary eruption-related deposit that overlies a large (~0.3 km3) reworked bioclastic and volcaniclastic flow deposit, formed from a shelf collapse between 8 and 35 ka. The origin of these deposits has been deduced through the correlation of marine sediment cores, component analysis and geochemical analysis. The 8–12 ka primary volcanic deposit was likely derived from a highly-erosive pyroclastic flow from the Soufrière Hills volcano that entered the ocean and mixed with the water column forming a water-supported density current. Previous investigations of the eruption record suggested that there was a hiatus in activity at the Soufrière Hills volcano between 16 and 6 ka. The ca 8–12 ka eruptive episode identified here shows that this hiatus was shorter than previously hypothesised, and thus highlights the importance of obtaining an accurate and completemarine record of events offshore from volcanic islands and incorporating such data into eruption history reconstructions. Comparisons with the submarine deposit characteristics of the 2003 dome collapse also suggests that the ~8–12 ka eruptive episode was more explosive than eruptions from the current eruptive episode.

Video-based training combined with flotation tank recovery does not improve three-point shooting in basketball

Video-based training combined with flotation tank recovery may provide an additional stimulus for improving shooting in basketball. A pre-post controlled trial was conducted to assess the effectiveness of a 3 wk intervention combining video-based training and flotation tank recovery on three-point shooting performance in elite female basketball players. Players were assigned to an experimental (n=10) and control group (n=9). A 3 wk intervention consisted of 2 x 30 min float sessions a week which included 10 min of video-based training footage, followed by a 3 wk retention phase. A total of 100 three-point shots were taken from 5 designated positions on the court at each week to assess three-point shooting performance. There was no clear difference in the mean change in the number of successful three-point shots between the groups (-3%; ±18%, mean; ±90% confidence limits). Video-based training combined with flotation recovery had little effect on three-point shooting performance.

Condensation kinetics in a turbulent nebular cloud

Model calculations, which include the effects of turbulence during subsequent solar nebula evolution after the collapse of a cool interstellar cloud, can reconcile some of the apparent differences between physical parameters obtained from theory and the cosmochemical record. Two important aspects of turbulence in a protoplanetary cloud include the growth and transport of solid grains. While the physical effects of the process can be calculated and compared with the probable remains of the nebula formulation period, the more subtle effects on primitive grains and their survival in the cosmochemical record cannot be readily evaluated. The environment offered by the Space Station (or Space Shuttle) experimental facility can provide the vacuum and low gravity conditions for sufficiently long time periods required for experimental verification of these cosmochemical models.

Inflow cannula design for biventricular assist devices

Cardiovascular diseases are a leading cause of death throughout the developed world. With the demand for donor hearts far exceeding the supply, a bridge-to-transplant or permanent solution is required. This is currently achieved with ventricular assist devices (VADs), which can be used to assist the left ventricle (LVAD), right ventricle (RVAD), or both ventricles simultaneously (BiVAD). Earlier generation VADs were large, volume-displacement devices designed for temporary support until a donor heart was found. The latest generation of VADs use rotary blood pump technology which improves device lifetime and the quality of life for end stage heart failure patients. VADs are connected to the heart and greater vessels of the patient through specially designed tubes called cannulae. The inflow cannulae, which supply blood to the VAD, are usually attached to the left atrium or ventricle for LVAD support, and the right atrium or ventricle for RVAD support. Few studies have characterized the haemodynamic difference between the two cannulation sites, particularly with respect to rotary RVAD support. Inflow cannulae are usually made of metal or a semi-rigid polymer to prevent collapse with negative pressures. However suction, and subsequent collapse, of the cannulated heart chamber can be a frequent occurrence, particularly with the relatively preload insensitive rotary blood pumps. Suction events may be associated with endocardial damage, pump flow stoppages and ventricular arrhythmias. While several VAD control strategies are under development, these usually rely on potentially inaccurate sensors or somewhat unreliable inferred data to estimate preload. Fixation of the inflow cannula is usually achieved through suturing the cannula, often via a felt sewing ring, to the cannulated chamber. This technique extends the time on cardiopulmonary bypass which is associated with several postoperative complications. The overall objective of this thesis was to improve the placement and design of rotary LVAD and RVAD inflow cannulae to achieve enhanced haemodynamic performance, reduced incidence of suction events, reduced levels of postoperative bleeding and a faster implantation procedure. Specific objectives were: * in-vitro evaluation of LVAD and RVAD inflow cannula placement, * design and in-vitro evaluation of a passive mechanism to reduce the potential for heart chamber suction, * design and in-vitro evaluation of a novel suture-less cannula fixation device. In order to complete in-vitro evaluation of VAD inflow cannulae, a mock circulation loop (MCL) was developed to accurately replicate the haemodynamics in the human systemic and pulmonary circulations. Validation of the MCL’s haemodynamic performance, including the form and magnitude of pressure, flow and volume traces was completed through comparisons of patient data and the literature. The MCL was capable of reproducing almost any healthy or pathological condition, and provided a useful tool to evaluate VAD cannulation and other cardiovascular devices. The MCL was used to evaluate inflow cannula placement for rotary VAD support. Left and right atrial and ventricular cannulation sites were evaluated under conditions of mild and severe heart failure. With a view to long term LVAD support in the severe left heart failure condition, left ventricular inflow cannulation was preferred due to improved LVAD efficiency and reduced potential for thrombus formation. In the mild left heart failure condition, left atrial cannulation was preferred to provide an improved platform for myocardial recovery. Similar trends were observed with RVAD support, however to a lesser degree due to a smaller difference in right atrial and ventricular pressures. A compliant inflow cannula to prevent suction events was then developed and evaluated in the MCL. As rotary LVAD or RVAD preload was reduced, suction events occurred in all instances with a rigid inflow cannula. Addition of the compliant segment eliminated suction events in all instances. This was due to passive restriction of the compliant segment as preload dropped, thus increasing the VAD circuit resistance and decreasing the VAD flow rate. Therefore, the compliant inflow cannula acted as a passive flow control / anti-suction system in LVAD and RVAD support. A novel suture-less inflow cannula fixation device was then developed to reduce implantation time and postoperative bleeding. The fixation device was evaluated for LVAD and RVAD support in cadaveric animal and human hearts attached to a MCL. LVAD inflow cannulation was achieved in under two minutes with the suture-less fixation device. No leakage through the suture-less fixation device – myocardial interface was noted. Continued development and in-vivo evaluation of this device may result in an improved inflow cannulation technique with the potential for off-bypass insertion. Continued development of this research, in particular the compliant inflow cannula and suture-less inflow cannulation device, will result in improved postoperative outcomes, life span and quality of life for end-stage heart failure patients.

Gay men, social media and self-presentation : managing identities in Gaydar, Facebook and beyond

This study analyses young gay men's identity management in social networking sites Gaydar and Facebook. It examines the expanded opportunities for identity management made available through the convergence of these spaces, as well as new privacy and safety concerns. Findings from this study are discussed in terms of their significance for gay men's digital culture, the approach to gay men's mental health taken by GLBT organisations and support groups, and within broader concerns around social networking sites and digital inequality.

Fire safety of buildings based on realistic fire time-temperature curves

In recent times, fire has become a major disaster in buildings due to the increase in fire loads, as a result of modern furniture and light weight construction. This has caused problems for safe evacuation and rescue activities, and in some instances lead to the collapse of buildings (Lewis, 2008 and Nyman, 2002). Recent research has shown that the actual fire resistance of building elements exposed to building fires can be less than their specified fire resistance rating (Lennon and Moore, 2003, Jones, 2002, Nyman, 2002 and Abecassis-Empis et al. 2008). Conventionally the fire rating of building elements is determined using fire tests based on the standard fire time-temperature curve given in ISO 834. This ISO 834 curve was developed in the early 1900s, where wood was the basic fuel source. In reality, modern buildings make use of thermoplastic materials, synthetic foams and fabrics. These materials are high in calorific values and increase both the speed of fire growth and heat release rate, thus increasing the fire severity beyond that of the standard fire curve. Hence it suggests the need to use realistic fire time-temperature curves in tests. Real building fire temperature profiles depend on the fuel load representing the combustible building contents, ventilation openings and thermal properties of wall lining materials. Fuel load is selected based on a review and suitable realistic fire time-temperature curves were developed. Fire tests were then performed for plasterboard lined light gauge steel framed walls for the developed realistic fire curves. This paper presents the details of the development of suitable realistic building fire curves, and the fire tests using them. It describes the fire performance of tested walls in comparison to the standard fire tests and highlights the differences between them. This research has shown the need to use realistic fire exposures in assessing the fire resistance rating of building elements.

Producing and maintaining professional identities in early childhood

This study is an inquiry into early childhood teacher professional identities. In Australia, workforce reforms in early childhood include major shifts in qualification requirements that call for a university four-year degree-qualified teacher to be employed in child care. This marks a shift in the early years workforce, where previously there was no such requirement. At the same time as these reforms to quality measures are being implemented, and requiring a substantive up skilling of the workforce, there is a growing body of evidence through recent studies that suggests these same four-year degree-qualified early childhood teachers have an aversion to working in child care. Their preferred employment option is to work in the early years of more formal schooling, not in before-school contexts. This collision of agendas warrants investigation. This inquiry is designed to investigate the site at which advocacy for higher qualification requirements meets early childhood teachers who are reluctant to choose child care as a possible career pathway. The key research question for this study is: How are early childhood teachers’ professional identities currently produced? The work of this thesis is to problematise the early childhood teacher in child care through a particular method of discourse analysis. There are two sets of data. The first was a key early childhood political document that read as a "moment of arising" (Foucault, 1984a, p. 83). It is a political document which was selected for its current influence on the early childhood field, and in particular, workforce reforms that call for four-year degree-qualified teachers to work in before-school contexts, including child care. The second data set was generated through four focus group discussions conducted with preservice early childhood teachers. The document and transcripts of the focus groups were both analysed as text, as conceptualised by Foucault (1981). Foucault’s work spans a number of years and a range of philosophical matters. This thesis draws particularly on Foucault’s writings on discourse, power/knowledge, regimes of truth and resistance. In order to consider the production of early childhood teachers’ professional identities, the study is also informed by identity theorists, who have worked on gender, performativity and investment (Davies, 2004/2006; McNay, 1992; Osgood, 2012; Walkerdine, 1990; Weedon, 1997). The ways in which discourses intersect, compete and collide produce the subject (Foucault, 1981) and, in the case of this inquiry, there are a number of competing discourses at play, which produce the early childhood teacher. These particular theories turn particular lenses on the question of professional identities in early childhood, and such a study calls for the application of particular methodologies. Discourse analysis was used as the methodological framework, and the analysis was informed by Foucauldian concepts of discourse. While Foucault did not prescribe a form of discourse analysis as a method, his writings nonetheless provide a valuable framework for illuminating discursive practices and, in turn, how people are affected, through the shifts and distribution of power (Foucault, 1980a). The treatment used with both data sets involved redescription. For the policy document, a technique for reading document-as-text applied a genealogical approach (Foucault, 1984a). For the focus groups, the process of redescription (Rorty, 1989) involved reading talk-as-text. As a method, redescription involves describing "lots and lots of things in new ways until you have created a pattern of linguistic behaviour which will tempt the new generation to adopt it" (Rorty, 1989, p. 9). The development and application of categories (Davies, 2004/2006) built on a poststructuralist theoretical framework and the literature review informed the data analysis method of discourse analysis. Irony provided a rhetorical and playful tool (Haraway, 1991; Rorty, 1989), to look to how seemingly opposing discourses are held together. This opens a space to collapse binary thinking and consider seemingly contradictory terms in a way in which both terms are possible and both are true. Irony resists the choice of one or the other being right, and holds the opposites together in tension. The thesis concludes with proposals for new, ironic categories, which work to bring together seemingly opposing terms, located at sites in the field of early childhood where discourses compete, collide and intersect to produce and maintain early childhood teacher professional identities. The process of mapping these discourses goes some way to investigating the complexities about identities and career choices of early childhood teachers. The category of "the cost of loving" captures the collision between care/love, inherent in child care, and new discourses of investment/economics. Investment/economics has not completely replaced care/love, and these apparent opposites were not read as a binary because both are necessary and both are true (Haraway, 1991). They are held together in tension to produce early childhood teacher professional identities. The policy document under scrutiny was New Directions, released in 2007 by the then opposition ALP leader, Kevin Rudd. The claim was made strongly that the "economic prosperity" of Australia relies on investment in early childhood. The arguments to invest are compelling and the neuroscience/brain research/child development together with economic/investment discourses demand that early childhood is funding is increased. The intersection of these discourses produces professional identities of early childhood teachers as a necessary part of the country’s economy, and thus, worthy of high status. The child care sector and work in child care settings are necessary, with children and the early childhood teacher playing key roles in the economy of the nation. Through New Directions it becomes sayable (Foucault, 1972/1989) that the work the early childhood teacher performs is legitimated and valued. The children are produced as "economic units". A focus on what children are able to contribute to the future economy of the nation re-positions children and produces these "smart productive citizens", making future economic contribution. The early childhood teacher is produced through this image of a child and "the cost of loving" is emphasised. A number of these categories were produced through the readings of the document-as text and the talk-as-text. Two ironic categories were read in the analysis of the transcripts of the focus group discussions, when treated as talk-as-text data: the early childhood teacher as a "heroic victim"; and the early childhood teacher as a "glorified babysitter". This thesis raises new questions about professional identities in early childhood. These new questions might go some way to prompt re-thinking of some government policy, as well as some aspects of early childhood teacher education course design. The images of children and images of child care provide provocations to consider preservice teacher education course design. In particular, how child care, as one of the early childhood contexts, is located, conceptualised and spoken throughout the course. Consideration by course designers and teacher educators of what discourses are privileged in course content —what discourses are diminished or silenced—would go some way to reconceptualising child care within preservice teacher education and challenging dominant ways of speaking child care, and work in child care. This inquiry into early childhood teachers’ professional identities has gone some way to exploring the complexities around the early childhood teacher in child care. It is anticipated that the significance of this study will thus have immediate applicably and relevance for the Australian early childhood policy landscape. The early childhood field is in a state of rapid change, and this inquiry has examined some of the disconnects between policy and practice. Awareness of the discourses that are in play in the field will continue to allow space for conversations that challenge dominant assumptions about child care, work in child care and ways of being an early childhood teacher in child care.

Timing, origin and emplacement dynamics of mass flows offshore of SE Montserrat in the last 110 ka : implications for landslide and tsunami hazards, eruption history, and volcanic island evolution

Mass flows on volcanic islands generated by volcanic lava dome collapse and by larger-volume flank collapse can be highly dangerous locally and may generate tsunamis that threaten a wider area. It is therefore important to understand their frequency, emplacement dynamics, and relationship to volcanic eruption cycles. The best record of mass flow on volcanic islands may be found offshore, where most material is deposited and where intervening hemipelagic sediment aids dating. Here we analyze what is arguably the most comprehensive sediment core data set collected offshore from a volcanic island. The cores are located southeast of Montserrat, on which the Soufriere Hills volcano has been erupting since 1995. The cores provide a record of mass flow events during the last 110 thousand years. Older mass flow deposits differ significantly from those generated by the repeated lava dome collapses observed since 1995. The oldest mass flow deposit originated through collapse of the basaltic South Soufriere Hills at 103-110 ka, some 20-30 ka after eruptions formed this volcanic center. A ∼1.8 km3 blocky debris avalanche deposit that extends from a chute in the island shelf records a particularly deep-seated failure. It likely formed from a collapse of almost equal amounts of volcanic edifice and coeval carbonate shelf, emplacing a mixed bioclastic-andesitic turbidite in a complex series of stages. This study illustrates how volcanic island growth and collapse involved extensive, large-volume submarine mass flows with highly variable composition. Runout turbidites indicate that mass flows are emplaced either in multiple stages or as single events.

Emplacement of pyroclastic deposits offshore Montserrat : insights from 3D seismic data

During the current (1995-present) eruptive phase of the Soufrière Hills volcano on Montserrat, voluminous pyroclastic flows entered the sea off the eastern flank of the island, resulting in the deposition of well-defined submarine pyroclastic lobes. Previously reported bathymetric surveys documented the sequential construction of these deposits, but could not image their internal structure, the morphology or extent of their base, or interaction with the underlying sediments. We show, by combining these bathymetric data with new high-resolution three dimensional (3D) seismic data, that the sequence of previously detected pyroclastic deposits from different phases of the ongoing eruptive activity is still well preserved. A detailed interpretation of the 3D seismic data reveals the absence of significant (> 3. m) basal erosion in the distal extent of submarine pyroclastic deposits. We also identify a previously unrecognized seismic unit directly beneath the stack of recent lobes. We propose three hypotheses for the origin of this seismic unit, but prefer an interpretation that the deposit is the result of the subaerial flank collapse that formed the English's Crater scarp on the Soufrière Hills volcano. The 1995-recent volcanic activity on Montserrat accounts for a significant portion of the sediments on the southeast slope of Montserrat, in places forming deposits that are more than 60. m thick, which implies that the potential for pyroclastic flows to build volcanic island edifices is significant.

Ultimate load behaviour of box-columns under combined loading of axial compression and torsion

This paper describes a study of the theoretical and experimental behaviour of box-columns of varying b/t ratios under loadings of axial compression and torsion and their combinations. Details of the testing rigs and the testing methods, the results obtained such as the load-deflection curves and the interaction diagrams, and experimental observations regarding the behaviour of box-models and the types of local plastic mechanisms associated with each type of loading are presented. A simplified rigid-plastic analysis is carried out to study the collapse behaviour of box-columns under these loadings, based on the observed plastic mechanisms, and the results are compared with those of experiments.

Load frequency control in a microgrid : challenges and improvements

A microgrid can span over a large area, especially in rural townships. In such cases, the distributed generators (DGs) must be controlled in a decentralized fashion, based on the locally available measurements. The main concerns are control of system voltage magnitude and frequency, which can either lead to system instability or voltage collapse. In this chapter, the operational challenges of load frequency control in a microgrid are discussed and few methods are proposed to meet these challenges. In particular, issues of power sharing, power quality and system stability are addressed, when the system operates under decentralized control. The main focus of this chapter is to provide solutions to improve the system performance in different situations. The scenarios considered are (a) when the system stability margin is low, (b) when the line impedance has a high R to X ratio, (c) when the system contains unbalanced and/or distorted loads. Also a scheme is proposed in which a microgrid can be frequency isolated from a utility grid while being capable of bidirectional power transfer. In all these cases, the use of angle droop in converter interfaced DGs is adopted. It has been shown that this results in a more responsive control action compared to the traditional frequency based droop control.

Simulation of retrofitted unreinforced concrete masonry unit walls under blast loading

This paper describes an investigation into the effectiveness of using spray-on nano-particle reinforced polymer and aluminium foam as new types of retrofit material to prevent the breaching and collapse of unreinforced concrete masonry walls subjected to blast over a whole range of dynamic and impulsive regimes. Material models from the LSDYNA material library were used to model the behaviors of each of the materials and its interface for retrofitted and unretrofitted masonry walls. Available test data were used to validate the numerical models. Using the validated LS-DYNA numerical models, the pressure-impulse diagrams for retrofitted concrete masonry walls were constructed. The efficiency of using these retrofits to strengthen the unreinforced concrete masonry unit (CMU) walls under various pressures and impulses was investigated using pressure-impulse diagrams. Comparisons were made to find the most efficient retrofits for masonry walls against blasts.

Financial Markets, Institutions and Money [3rd ed.]

"The financial system is a key influencer of the health and efficiency of an economy. The role of the financial system is to gather money from people and businesses that currently have more money than they need and transfer it to those that can use it for either business or consumer expenditures. This flow of funds through financial markets and institutions in the Australian economy is huge (in the billions of dollars), affecting business profits, the rate of inflation, interest rates and the production of goods and services. In general, the larger the flow of funds and the more efficient the financial system, the greater the economic output and welfare in the economy. It is not possible to have a modern, complex economy such as that in Australia, without an efficient and sound financial system. The global financial crisis (GFC) of late 2007–09 (and the ensuing European debt crisis), where the global financial market was on the brink of collapse with only significant government intervention stopping a catastrophic global failure of the market, illustrated the importance of the financial system. Financial Markets, Institutions and Money 3rd edition introduces students to the financial system, its operations, and participants. The text offers a fresh, succinct analysis of the financial markets and discusses how the many participants in the financial system interrelate. This includes coverage of regulators, regulations and the role of the Reserve Bank of Australia, that ensure the system’s smooth running, which is essential to a modern economy. The text has been significantly revised to take into account changes in the financial world."---publisher website Table of Contents 1. The financial system - an overview 2. The Monetary Authorities 3. The Reserve Bank of Australia and interest rates 4. The level of interest rates 5. Mathematics of finance 6. Bond Prices and interest rate risk 7. The Structure of Interest Rates 8. Money Markets 9. Bond Markets 10. Equity Markets