Ongoing outbreak of dengue serotype 3 in Solomon Islands, January to May 2013

Introduction In January 2013, clinicians in Honiara, Solomon Islands noted several patients presenting with dengue-like illness. Serum from three cases tested positive for dengue by rapid diagnostic test. Subsequent increases in cases were reported, and the outbreak was confirmed as being dengue serotype-3 by further laboratory tests. This report describes the ongoing outbreak investigation, findings and response. Methods Enhanced dengue surveillance was implemented in the capital, Honiara, and in the provinces. This included training health staff on dengue case definitions, data collection and reporting. Vector surveillance was also conducted. Results From 3 January to 15 May 2013, 5254 cases of suspected dengue were reported (101.8 per 10 000 population), including 401 hospitalizations and six deaths. The median age of cases was 20 years (range zero to 90), and 86% were reported from Honiara. Both Aedes aegyti and Aedes albopictus were identified in Honiara. Outbreak response measures included clinical training seminars, vector control activities, implementation of diagnostic and case management protocols and a public communication campaign. Discussion This was the first large dengue outbreak documented in Solomon Islands. Factors that may have contributed to this outbreak include a largely susceptible population, the presence of a highly efficient dengue vector in Honiara, a high-density human population with numerous breeding sites and favourable weather conditions for mosquito proliferation. Although the number of cases has plateaued since 1 April, continued enhanced nationwide surveillance and response activities are necessary.

Downunder grads

Downunder Grads is a 4-part series (4 x 26') screened on the Special Broadcasting Station in 2008. It's the start of the semester at one of Australia's top universities and 37,000 students, are about to embark on their studies. University is make or break time; a time that can change people forever. From free education in the 1980s to HECS fee debt and a large increase in full fee paying students, university education is now big business. Through a variety of character stories this four-part series explores the contemporary Australian university experience of both international and Australian students from a range of different backgrounds.

Forrest v ASIC : a ‘perfect storm’

The policy objectives of the continuous disclosure regime augmented by the misleading or deceptive conduct provisions in the Corporations Act are to enhance the integrity and efficiency of Australian capital markets by ensuring equality of opportunity for all investors through public access to accurate and material company information to enable them to make well-informed investment decisions. This article argues that there were failures by the regulators in the performance of their roles to protect the interests of investors in Forrest v ASIC; FMG v ASIC (2012) 247 CLR 486: ASX failed to enforce timely compliance with the continuous disclosure regime and ensure that the market was properly informed by seeking immediate clarification from FMG as to the agreed fixed price and/or seeking production of a copy of the CREC agreement; and ASIC failed to succeed in the High Court because of the way it pleaded its case. The article also examines the reasoning of the High Court in Forrest v ASIC and whether it might have changed previous understandings of the Campomar test for determining whether representations directed to the public generally are misleading.

Experience has no shadow

This research is situated in the field of practice-led research investigating embodied perspectives on the performance of dance making. In the stock of choreographic literature, the celebrated ‘creativity’ label is associated predominantly with the choreographer and is discussed in terms of product rather than process (Lussier-Ley and Durand-Bush 2009; Hennessey 2003). A reliance on the mystery of inspiration or choreographic genius (Penty 1998) for the production of ‘great’ dance works does not acknowledge the complex and timely process common in the creation of dance (Mace and Ward 2002) nor provide a true representation of the creative contributors (Farrer 2014). The failure to attribute creative impulses and skills to dancers is reminiscent of a time when they were thought of only as instruments in the creative process not active participants and collaborators (Jowitt 2001a; H’Doubler 1957). This project asked the question, to what end do dancers contribute to choreography and how is this contribution valued and recognised? Dancers are integral to the creative process. The research found that the scope of a dancers’ creative involvement in the development of a new work is dependent on: the individual choreographers approach to creating movement; the relationship between dancer and choreographer, and dancer and fellow company members; and the dancers collaborative skills and interpretive skills, versatility, and initiative. Recognition and attribution of dancers’ creative input is dependent on a choreographer’s viewpoint, generosity, and prior creative experiences. The work was created as a part of the Ausdance Queensland 2010 Bell Tower III Choreographic Residency program. Applicants were peer reviewed and vetted by a panel of local and national dance producers. The creative work was presented at the Judith Wright Centre for Live Arts. The project was funded by Ausdance Queensland and Arts Queensland. https://es-es.facebook.com/events/106661226023025/?hc_location=stream

Water reporting using the water accounting framework

Water reporting is becoming increasingly common amongst minerals companies. The Minerals Council of Australia’s (MCA) Water Accounting Framework (WAF), co-developed by the Centre for Water in the Minerals Industry (CWiMI), provides a standard set of terms for water reporting. The WAF was established due to the need of the minerals industry to report on its water management consistently, rather than report using company-specific terms which can cause confusion and makes company comparisons impossible. The WAF consists of two models: The Input-Output Model, which represents interactions between a site and its surrounding community and environment, and the Operational Model, which represents the interactions within a site.

Learning about inclusion from developing countries : using the index for inclusion

There is a need for a more critical perspective and reporting about the value of taking a model of inclusion developed in western countries and based upon the human rights ethos applying it in developing countries. This chapter will report firstly on how the Index for Inclusion (hereinafter referred to as the Index) was used in Australia as a tool for review and development; and secondly how the process of using the Index is adjusted for use in the Pacific Islands and other developing nations in collaborative and culturally sensitive ways to support and evaluate progress towards inclusive education. Examples are provided from both contexts to demonstrate the impact of the Index as an effective tool to support a more inclusive response to diversity in schools.

Case study: Dragline swing to dump automation

Dragline Swing to Dump Automation By Peter Corke, CSIRO Manufacturing Technology/CRC for Mining Technology and Equipment (CMTE) Peter Corke presented a case study of a project to automate the dragline swing to dump operation. The project is funded by ACARP, BHP Coal, Pacific Coal and the CMTE and is being carried out on a dragline at Pacific Coal's Meandu mine near Brisbane. Corke began by highlighting that the minerals industry makes extensive use of large, mechanised machines. However, unlike other industries, mining has not adopted automation and most machines are controlled by human operators on board the machine itself. Choosing an automation target The dragline automation was chosen because: ò draglines are one of the biggest capital assets in a mine; ò performance between operators vary significantly, so improved capital utilisation is possible; ò the dragline is often the bottleneck in production; ò a large part of the operation cycle is spent swinging from dig to dump; and ò it is technically feasible. There has been a history of drag line automation projects, none with great success.

Social audit: A mess or means in CSR assessment?

Social Audits play an important role in the measurement and analysis of a company's social performance. They provide corporations with a tool to plan and manage their social responsibility activities. Similarly, they provide stakeholders with a tool which they could use when monitoring, assessing and analysing concrete and accurate company data. Whilst the topic of social audits has been raised and discussed by a number of scholars, industry representatives and government institutions over the years, such contributions have mostly revolved around the general notion and importance of social audit, rather than addressing the most effective ways to achieve a widespread and reliable adoption of the practice through the implementation of specific legal regulation and other methods. This matter is of significant importance as corporations can exert a considerable amount control over the entire social audit process, allowing them to disclose only information deemed beneficial to their own corporate image instead of releasing all relevant social and environmental data. In order to achieve a truly transparent system promoting corporate accountability, there is an obvious need for social audits to be regulated. One of the purposes of this book is to provide an overview of the development of social audit practices and regulation. It also sets out to explore the issues and challenges which have arisen relating to this matter around the world.

Factor 5 in eco-cement: Zeobond Pty Ltd

Cement production is estimated to be responsible for approximately 6 per cent of total global greenhouse gas emissions. One of the most promising alternatives to common Portland cement is geopolymer cement, and Australian company Zeobond is a bone fide leader in its manufacture.

Resolving cryptic species complexes of major tephritid pests

An FAO/IAEA Co-ordinated Research Project (CRP) on “Resolution of Cryptic Species Complexes of Tephritid Pests to Overcome Constraints to SIT Application and International Trade” was conducted from 2010 to 2015. As captured in the CRP title, the objective was to undertake targeted research into the systematics and diagnostics of taxonomically challenging fruit fly groups of economic importance. The scientific output was the accurate alignment of biological species with taxonomic names; which led to the applied outcome of assisting FAO and IAEA Member States in overcoming technical constraints to the application of the Sterile Insect Technique (SIT) against pest fruit flies and the facilitation of international agricultural trade. Close to 50 researchers from over 20 countries participated in the CRP, using coordinated, multidisciplinary research to address, within an integrative taxonomic framework, cryptic species complexes of major tephritid pests. The following progress was made for the four complexes selected and studied: Anastrepha fraterculus complex – Eight morphotypes and their geographic and ecological distributions in Latin America were defined. The morphotypes can be considered as distinct biological species on the basis of differences in karyotype, sexual incompatibility, post-mating isolation, cuticular hydrocarbon, pheromone, and molecular analyses. Discriminative taxonomic tools using linear and geometric morphometrics of both adult and larval morphology were developed for this complex. Bactrocera dorsalis complex – Based on genetic, cytogenetic, pheromonal, morphometric, and behavioural data, which showed no or only minor variation between the Asian/African pest fruit flies Bactrocera dorsalis, B. papayae, B. philippinensis and B. invadens, the latter three species were synonymized with B. dorsalis. Of the five target pest taxa studied, only B. dorsalis and B. carambolae remain as scientifically valid names. Molecular and pheromone markers are now available to distinguish B. dorsalis from B. carambolae. Ceratitis FAR Complex (C. fasciventris, C. anonae, C. rosa) – Morphology, morphometry, genetic, genomic, pheromone, cuticular hydrocarbon, ecology, behaviour, and developmental physiology data provide evidence for the existence of five different entities within this fruit fly complex from the African region. These are currently recognised as Ceratitis anonae, C. fasciventris (F1 and F2), C. rosa and a new species related to C. rosa (R2). The biological limits within C. fasciventris (i.e. F1 and F2) are not fully resolved. Microsatellites markers and morphological identification tools for the adult males of the five different FAR entities were developed based on male leg structures. Zeugodacus cucurbitae (formerly Bactrocera (Zeugodacus) cucurbitae) – Genetic variability was studied among melon fly populations throughout its geographic range in Africa and the Asia/Pacific region and found to be limited. Cross-mating studies indicated no incompatibility or sexual isolation. Host preference and genetic studies showed no evidence for the existence of host races. It was concluded that the melon fly does not represent a cryptic species complex, neither with regard to geographic distribution nor to host range. Nevertheless, the higher taxonomic classification under which this species had been placed, by the time the CRP was started, was found to be paraphyletic; as a result the subgenus Zeugodacus was elevated to genus level.

PMU measurement based dynamic load modeling using SVC devices in online environment

Online dynamic load modeling has become possible with the availability of Static Voltage Compensator (SVC) and Phasor Measurement Unit (PMU) devices. The power of the load response to the small random bounded voltage fluctuations caused from SVC can be measured by PMU for modelling purposes. The aim of this paper is to illustrate the capability of identifying an aggregated load model from high voltage substation level in the online environment. The induction motor is used as the main test subject since it contributes the majority of the dynamic loads. A test system representing simple electromechanical generator model serving dynamic loads through the transmission network is used to verify the proposed method. Also, dynamic load with multiple induction motors are modeled to achieve a better realistic load representation.

Power system stability implications from electromechanical wave propagation

Electromechanical wave propagation characterizes the first-swing dynamic response in a spatially delayed manner. This paper investigates the characteristics of this phenomenon in two-dimensional and one-dimensional power systems. In 2-D systems, the wave front expands as a ripple in a pond. In 1-D systems, the wave front is more concentrated, retains most of its magnitude, and travels like a pulse on a string. This large wave front is more impactful upon any weak link and easily causes transient instability in 1-D systems. The initial disturbance injects both high and low frequency components, but the lumped nature of realistic systems only permits the lower frequency components to propagate through. The kinetic energy split at a junction is equal to the generator inertia ratio in each branch in an idealized continuum system. This prediction is approximately valid in a realistic power system. These insights can enhance understanding and control of the traveling waves.

Reflections from East Asia's ageing population: An interaction designers' challenge

As Asia experiences the demographic imbalance between working and ageing populations, the need for attention in this area is highlighted. The shift of a country's age structure that results from people having small families and living long lives, where previously they had large families and lived short lives, results in more workers and fewer dependents creating economic growth, known as the demographic dividend. However for a generation after this bulge and dividend, a disproportionate number of older people must be supported by a smaller working population, a current concern in Asia with its rapidly growing number of older adults. This extended abstract draws practical and unique insights from three of the oldest and richest nations in Asia - Japan, South Korea and China, on the perspective of interactive technology design for older adults. ICT has powerful potential to ameliorate the imbalance in the population demographic through its potential to leverage various kinds of support. As HCI researchers, this is a challenge we embrace; a challenge for the ageing society of unique individuals to exploit the technologies that they have helped to create. The paper draws lessons from key sample studies, one from each country, which aimed to understand their ageing population. The insights for interaction designers are presented in the form of a practical set of reflections to guide the authors, who are in the early stages of research on technology design for older adults.